sql/opt_range.cc:
Removed duplicate code (if statement must have been duplicated during earlier merge).
sql/sql_partition.cc:
After mergeing bug#46362 and bug#20577, the NULL partition was also searched
when col = const, fixed by checking if = or range.
Problem was that the partition containing NULL values
was pruned away, since '2001-01-01' < '2001-02-00' but
TO_DAYS('2001-02-00') is NULL.
Added the NULL partition for RANGE/LIST partitioning on TO_DAYS()
function to be scanned too.
Also fixed a bug that added ALLOW_INVALID_DATES to sql_mode
(SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
partitioned table would add it).
mysql-test/include/partition_date_range.inc:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Added include file to decrease test code duplication
mysql-test/r/partition_pruning.result:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Added test results
mysql-test/r/partition_range.result:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Updated test result.
This fix adds the partition containing NULL values to
the list of partitions to be scanned.
mysql-test/t/partition_pruning.test:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Added test case
sql/item.h:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Added MONOTONIC_*INCREASE_NOT_NULL values to be used by TO_DAYS.
sql/item_timefunc.cc:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Calculate the number of days as return value even for invalid dates.
This is so that pruning can be used even for invalid dates.
sql/opt_range.cc:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Fixed a bug that added ALLOW_INVALID_DATES to sql_mode
(SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
partitioned table would add it).
sql/partition_info.h:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Resetting ret_null_part when a single partition is to be used, this
to avoid adding the NULL partition.
sql/sql_partition.cc:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Always include the NULL partition if RANGE or LIST.
Use the returned value for the function for pruning, even if
it is marked as NULL, so that even '2000-00-00' can be
used for pruning, even if TO_DAYS('2000-00-00') is NULL.
Changed == to >= in get_next_partition_id_list to avoid
crash if part_iter->part_nums is not correctly setup.
Problem was that the partition containing NULL values
was pruned away, since '2001-01-01' < '2001-02-00' but
TO_DAYS('2001-02-00') is NULL.
Added the NULL partition for RANGE/LIST partitioning on TO_DAYS()
function to be scanned too.
Also fixed a bug that added ALLOW_INVALID_DATES to sql_mode
(SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
partitioned table would add it).
There were a problem since pruning uses the field
for comparison (while evaluate_join_record uses longlong),
resulting in pruning failures when comparing DATE to DATETIME.
Fix was to always comparing DATE vs DATETIME as DATETIME,
by adding ' 00:00:00' to the DATE string.
And adding optimization for comparing with 23:59:59, so that
DATETIME_col > '2001-02-03 23:59:59' ->
TO_DAYS(DATETIME_col) > TO_DAYS('2001-02-03 23:59:59') instead
of '>='.
mysql-test/r/partition_pruning.result:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Updated result-file
mysql-test/t/partition_pruning.test:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Added testcases.
sql-common/my_time.c:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
removed duplicate assignment.
sql/item.cc:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Changed field_is_equal_to_item into field_cmp_to_item, to
better handling DATE vs DATETIME comparision.
sql/item.h:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Updated comment
sql/item_timefunc.cc:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Added optimization (pruning) of DATETIME where time-part is
23:59:59
sql/opt_range.cc:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Using the new stored_field_cmp_to_item for better pruning.
There were a problem since pruning uses the field
for comparison (while evaluate_join_record uses longlong),
resulting in pruning failures when comparing DATE to DATETIME.
Fix was to always comparing DATE vs DATETIME as DATETIME,
by adding ' 00:00:00' to the DATE string.
And adding optimization for comparing with 23:59:59, so that
DATETIME_col > '2001-02-03 23:59:59' ->
TO_DAYS(DATETIME_col) > TO_DAYS('2001-02-03 23:59:59') instead
of '>='.
The code was using a special global buffer for the value of IS NULL ranges.
This was not always long enough to be copied by a regular memcpy. As a
result read buffer overflows may occur.
Fixed by setting the null byte to 1 and setting the rest of the field disk image
to NULL with a bzero (instead of relying on the buffer and memcpy()).
The code was using a special global buffer for the value of IS NULL ranges.
This was not always long enough to be copied by a regular memcpy. As a
result read buffer overflows may occur.
Fixed by setting the null byte to 1 and setting the rest of the field disk image
to NULL with a bzero (instead of relying on the buffer and memcpy()).
The check for stack overflow was independent of the size of the
structure stored in the heap.
Fixed by adding sizeof(PARAM) to the requested free heap size.
The check for stack overflow was independent of the size of the
structure stored in the heap.
Fixed by adding sizeof(PARAM) to the requested free heap size.
When the function exits with an error it was not
freeing the local Unique class instance.
Fixed my making sure all the places where the function
returns from are freeing the Unique instance
When the function exits with an error it was not
freeing the local Unique class instance.
Fixed my making sure all the places where the function
returns from are freeing the Unique instance
WHERE and GROUP BY clause
Loose index scan may use range conditions on the argument of
the MIN/MAX aggregate functions to find the beginning/end of
the interval that satisfies the range conditions in a single go.
These range conditions may have open or closed minimum/maximum
values. When the comparison returns 0 (equal) the code should
check the type of the min/max values of the current interval
and accept or reject the row based on whether the limit is
open or not.
There was a wrong composite condition on checking this and it was
not working in all cases.
Fixed by simplifying the conditions and reversing the logic.
mysql-test/r/group_min_max.result:
Bug #45386: test case
mysql-test/t/group_min_max.test:
Bug #45386: test case
sql/opt_range.cc:
Bug #45386: fix the check whether to use the value if on the
interval boundry
WHERE and GROUP BY clause
Loose index scan may use range conditions on the argument of
the MIN/MAX aggregate functions to find the beginning/end of
the interval that satisfies the range conditions in a single go.
These range conditions may have open or closed minimum/maximum
values. When the comparison returns 0 (equal) the code should
check the type of the min/max values of the current interval
and accept or reject the row based on whether the limit is
open or not.
There was a wrong composite condition on checking this and it was
not working in all cases.
Fixed by simplifying the conditions and reversing the logic.
Range analysis did not request sorted output from the storage engine,
which cause partitioned handlers to process one partition at a time
while reading key prefixes in ascending order, causing values to be
missed. Fixed by always requesting sorted order during range analysis.
This fix is introduced in 6.0 by the fix for bug no 41136.
mysql-test/r/group_min_max.result:
Bug#44821: Test result.
mysql-test/t/group_min_max.test:
Bug#44821: Test case
sql/opt_range.cc:
Bug#44821: Fix.
Range analysis did not request sorted output from the storage engine,
which cause partitioned handlers to process one partition at a time
while reading key prefixes in ascending order, causing values to be
missed. Fixed by always requesting sorted order during range analysis.
This fix is introduced in 6.0 by the fix for bug no 41136.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
mysql-test/r/information_schema.result:
Fixed a result file.
mysql-test/r/innodb-autoinc.result:
Fixed a result file.
mysql-test/t/connect.test:
Fixed a problem with merge, needed to close
connections and use the default
mysql-test/r/index_merge_myisam.result:
Testcases
mysql-test/t/index_merge_myisam.test:
Testcases
sql/strfunc.cc:
Change optimizer_switch from no_xxx to xxx=on/xx=off.
- Add functions to parse the new syntax
return no rows
The algorithm of determining the best key for loose index scan is doing a loop
over the available indexes and selects the one that has the best cost.
It retrieves the parameters of the current index into a set of variables.
If the cost of using the current index is lower than the best cost so far it
copies these variables into another set of variables that contain the
information for the best index so far.
After having checked all the indexes it uses these variables (outside of the
index loop) to create the table read plan object instance.
The was a single omission : the key_infix/key_infix_len variables were used
outside of the loop without being preserved in the loop for the best index
so far.
This causes these variables to get overwritten by the next index(es) checked.
Fixed by adding variables to hold the data for the current index, passing
the new variables to the function that assigns values to them and copying
the new variables into the existing ones when selecting a new current best
index.
To avoid further such problems moved the declarations of the variables used
to keep information about the current index inside the loop's compound
statement.
mysql-test/r/group_min_max.result:
Bug #41610: test case
mysql-test/t/group_min_max.test:
Bug #41610: test case
sql/opt_range.cc:
Bug #41610: copy the infix data for the current best index
return no rows
The algorithm of determining the best key for loose index scan is doing a loop
over the available indexes and selects the one that has the best cost.
It retrieves the parameters of the current index into a set of variables.
If the cost of using the current index is lower than the best cost so far it
copies these variables into another set of variables that contain the
information for the best index so far.
After having checked all the indexes it uses these variables (outside of the
index loop) to create the table read plan object instance.
The was a single omission : the key_infix/key_infix_len variables were used
outside of the loop without being preserved in the loop for the best index
so far.
This causes these variables to get overwritten by the next index(es) checked.
Fixed by adding variables to hold the data for the current index, passing
the new variables to the function that assigns values to them and copying
the new variables into the existing ones when selecting a new current best
index.
To avoid further such problems moved the declarations of the variables used
to keep information about the current index inside the loop's compound
statement.
- Add support for setting it as a server commandline argument
- Add support for those switches:
= no_index_merge
= no_index_merge_union
= no_index_merge_sort_union
= no_index_merge_intersection
mysql-test/r/index_merge_myisam.result:
Testcases for index_merge related @@optimizer_switch flags.
mysql-test/t/index_merge_myisam.test:
Testcases for index_merge related @@optimizer_switch flags.
sql/set_var.cc:
- Backport @@optimizer_switch support from 6.0
- Add support for setting it as a server commandline argument
sql/sql_class.h:
- Backport @@optimizer_switch support from 6.0
sql/sql_select.h:
- Backport @@optimizer_switch support from 6.0
- Add support for setting it as a server commandline argument
- Add support for those switches:
= no_index_merge
= no_index_merge_union
= no_index_merge_sort_union
= no_index_merge_intersection
