Merge Facebook commit cd063ab930
authored by Peng Tian from https://github.com/facebook/mysql-5.6
Introduced a new configuration variable innodb_fatal_semaphore_wait_threshold,
it makes the fatal semaphore timeout configurable. Modified original commit
so that no MariaDB server files are changed, instead introduced a new
InnoDB/XtraDB configuration variable.
Its default/min/max vlaues are 600/1/2^32-1 in seconds (it was hardcoded
as 600, now its default value is 600, so the default behavior of this diff
should be no change).
setting of innodb_io_capacity_max
(a) Changed the behaviour so that if you set innodb_io_capacity to a
value > innodb_io_capacity_max that the value is accepted AND
that innodb_io_capacity_max = innodb_io_capacity * 2.
(b) If someone wants to reduce innodb_io_capacity_max and
reduce it below innodb_io_capacity then innodb_io_capacity
should be reduced to the same level as innodb_io_capacity_max.
In both cases give a warning to user.
Merge Facebook commit 154c579b828a60722a7d9477fc61868c07453d08
and e8f0052f9b112dc786bf9b957ed5b16a5749f7fd authored
by Steaphan Greene from https://github.com/facebook/mysql-5.6
Optimize prefix index queries to skip cluster index lookup when possible.
Currently InnoDB will always fetch the clustered index (primary key
index) for all prefix columns in an index, even when the value of a
particular record is smaller than the prefix length. This change
optimizes that case to use the record from the secondary index and avoid
the extra lookup.
Also adds two status vars that track how effective this is:
innodb_secondary_index_triggered_cluster_reads:
Times secondary index lookup triggered cluster lookup.
innodb_secondary_index_triggered_cluster_reads_avoided:
Times prefix optimization avoided triggering cluster lookup.
Merge Facebook commit 4f3e0343fd2ac3fc7311d0ec9739a8f668274f0d
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
Adds innodb_idle_flush_pct to enable tuning of the page flushing rate
when the system is relatively idle. We care about this, since doing
extra unnecessary flash writes shortens the lifespan of the flash.
Merged Facebook commit ecff018632c6db49bad73d9233c3cdc9f41430e9
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
This change is to fix: http://bugs.mysql.com/62534
This makes innodb_max_dirty_pages_pct a double with min,default,max values
0.001, 75, 99.999.
This also makes innodb_max_dirty_pages_pct_lwm and adaptive_flushing_lwm
doubles, as these sysvars are inter-dependent.
Added more to the BUFFER POOL AND MEMORY section of SHOW INNODB STATUS:
Percent pages dirty: X.X
This is all n_dirty_pages / used_pages
Percent all pages dirty: X.X
This is all n_dirty_pages / all-pages
Max dirty pages percent: X.X
This is innodb_max_dirty_pages_pct
Also changed all of buf from 2 to 3 digits of precision (%.2f -> %.3f).
Added MAX_STATEMENT_TIME user variable to automaticly kill queries after a given time limit has expired.
- Added timer functions based on pthread_cond_timedwait
- Added kill_handlerton() to signal storage engines about kill/timeout
- Added support for GRANT ... MAX_STATEMENT_TIME=#
- Copy max_statement_time to current user, if stored in mysql.user
- Added status variable max_statement_time_exceeded
- Added KILL_TIMEOUT
- Removed digest hash from performance schema tests as they change all the time.
- Updated test results that changed because of the new user variables or new fields in mysql.user
This functionallity is inspired by work done by Davi Arnaut at twitter.
Test case is copied from Davi's work.
Documentation can be found at
https://kb.askmonty.org/en/how-to-limittimeout-queries/
mysql-test/r/mysqld--help.result:
Updated for new help message
mysql-test/suite/perfschema/r/all_instances.result:
Added new mutex
mysql-test/suite/sys_vars/r/max_statement_time_basic.result:
Added testing of max_statement_time
mysql-test/suite/sys_vars/t/max_statement_time_basic.test:
Added testing of max_statement_time
mysql-test/t/max_statement_time.test:
Added testing of max_statement_time
mysys/CMakeLists.txt:
Added thr_timer
mysys/my_init.c:
mysys/mysys_priv.h:
Added new mutex and condition variables
Added new mutex and condition variables
mysys/thr_timer.c:
Added timer functions based on pthread_cond_timedwait()
This can be compiled with HAVE_TIMER_CREATE to benchmark agains timer_create()/timer_settime()
sql/lex.h:
Added MAX_STATEMENT_TIME
sql/log_event.cc:
Safety fix (timeout should be threated as an interrupted query)
sql/mysqld.cc:
Added support for timers
Added status variable max_statement_time_exceeded
sql/share/errmsg-utf8.txt:
Added ER_QUERY_TIMEOUT
sql/signal_handler.cc:
Added support for KILL_TIMEOUT
sql/sql_acl.cc:
Added support for GRANT ... MAX_STATEMENT_TIME=#
Copy max_statement_time to current user
sql/sql_class.cc:
Added timer functionality to THD.
Added thd_kill_timeout()
sql/sql_class.h:
Added timer functionality to THD.
Added KILL_TIMEOUT
Added max_statement_time variable in similar manner as long_query_time was done.
sql/sql_connect.cc:
Added handling of max_statement_time_exceeded
sql/sql_parse.cc:
Added starting and stopping timers for queries.
sql/sql_show.cc:
Added max_statement_time_exceeded for user/connects status in MariaDB 10.0
sql/sql_yacc.yy:
Added support for GRANT ... MAX_STATEMENT_TIME=# syntax, to be enabled in 10.0
sql/structs.h:
Added max_statement_time user resource
sql/sys_vars.cc:
Added max_statement_time variables
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.test
Removed test as we require all fields in mysql.user table.
scripts/mysql_system_tables.sql
scripts/mysql_system_tables_data.sql
scripts/mysql_system_tables_fix.sql
Updated mysql.user with new max_statement_time field
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
* Added a basic test for wsrep_sync_wait system variable.
* Separate innodb_load_xa tests for wsrep and non-wsrep builds.
* Updated file_contents.test with correct file location
* Some coding style related changes.
mysqldump:
- Added --log-queries to allow one to disable logging for the dump
sql/log_event.cc:
- Removed setting of enable_slow_log as it's not required anymore.
sql/sql_parse.cc:
- Set enable_slow_log to value of thd->variables.sql_log_slow as this will speed up tests if slow log is disabled.
- opt_log_slow_admin_statements can now only disable slow log, not enable it.
sql/sql_explain.cc:
- Minor cleanup
Other things:
- Added sql_log_slow to system variables.
- Changed opt_slow_log to global_system_variables.sql_log_slow in all files
- Updated tests to reflect changes
A donor node does a flush tables and then tries to
freeze innodb writes before proceeding with SST.
However, innodb_disallow_writes was missing in xtradb.
Merged 'InnodbFreeze' patch from maria-5.5-galera's to
xtradb. Also, merged some changes missing in innobase's
os0file.cc.
Added a basic test case for innodb_disallow_writes system
variable.
Reason for the problem was that the hash of changed files in the key cache was too small (was 128). Fixed by making the hash size larger and changeable.
- Introduced key-cache-file-hash-size (default 512) for MyISAM and aria_pagecache_file_hash_size (default 512) for Aria.
- Added new status variable "Feature_delay_key_write" which counts number of tables opened that are using delay_key_write
mysql-test/r/features.result:
Added test of Feature_delay_key_write
mysql-test/r/key_cache.result:
Updated tests as the number of blocks has changed
mysql-test/r/mysqld--help.result:
Updated result
mysql-test/suite/maria/maria3.result:
Updated result
mysql-test/suite/sys_vars/r/key_cache_file_hash_size_basic.result:
Test new variable
mysql-test/suite/sys_vars/t/aria_pagecache_file_hash_size_basic.test:
Test new variable
mysql-test/suite/sys_vars/t/key_cache_file_hash_size_basic.test:
Test new variable
mysql-test/t/features.test:
Added test of Feature_delay_key_write
mysql-test/t/key_cache.test:
Updated tests as the number of blocks has changed
mysys/mf_keycache.c:
Made CHANGED_BLOCKS_HASH dynamic
sql/handler.cc:
Updated call to init_key_cache()
sql/mysqld.cc:
Added "Feature_delay_key_write"
Added support for key-cache-file-hash-size
sql/mysqld.h:
Added support for key-cache-file-hash-size
sql/sql_class.h:
Added feature_files_opened_with_delayed_keys
sql/sys_vars.cc:
Added key_cache_file_hash_size
storage/maria/ha_maria.cc:
Added pagecache_file_hash_size
Added counting of files with delay_key_write
storage/maria/ma_checkpoint.c:
Fixed compiler warning
storage/maria/ma_pagecache.c:
Made PAGECACHE_CHANGED_BLOCKS_HASH into a variable
storage/maria/ma_pagecache.h:
Made PAGECACHE_CHANGED_BLOCKS_HASH into a variable
storage/maria/ma_rt_test.c:
Updated parameters for init_pagecache()
storage/maria/ma_test1.c:
Updated parameters for init_pagecache()
storage/maria/ma_test2.c:
Updated parameters for init_pagecache()
storage/maria/ma_test3.c:
Updated parameters for init_pagecache()
storage/maria/maria_chk.c:
Updated parameters for init_pagecache()
storage/maria/maria_ftdump.c:
Updated parameters for init_pagecache()
storage/maria/maria_pack.c:
Updated parameters for init_pagecache()
storage/maria/maria_read_log.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_pagecache_consist.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_pagecache_rwconsist.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_pagecache_rwconsist2.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_pagecache_single.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_first_lsn-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_max_lsn-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_multigroup-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_multithread-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_noflush-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_nologs-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_pagecache-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_purge-t.c:
Updated parameters for init_pagecache()
storage/myisam/ha_myisam.cc:
Added counting of files with delay_key_write
storage/myisam/mi_check.c:
Updated call to init_key_cache()
storage/myisam/mi_test1.c:
Updated call to init_key_cache()
storage/myisam/mi_test2.c:
Updated call to init_key_cache()
storage/myisam/mi_test3.c:
Updated call to init_key_cache()
storage/myisam/mi_test_all.sh:
Fixed broken test
storage/myisam/myisam_ftdump.c:
Updated call to init_key_cache()
storage/myisam/myisamchk.c:
Updated call to init_key_cache()
storage/myisam/myisamlog.c:
Updated call to init_key_cache()
it checked that the default is lz4. Which only worked on systems that
had lz4 and did not have lzo. Now it checks for the default to be zlib,
which works on systems that has neither lz4 or lzo. Like our package
builders in buildbot. This is intentional, we don't want introduce
additional dependencies (lz4, lzo) for our packages just yet.
This can (and will) be reconsidered, and this test can (and will)
be updated again.
Adapt default_tmp_storage_engine implementation from mysql-5.6
New feature (as compared to 5.6), default_tmp_storage_engine=NULL
means that temporary tables will use default_storage_engine value.
This makes the behavior backward compatible.
(Inadequate background LRU flushing for write workloads with InnoDB compression).
If InnoDB compression is used and the workload has writes, the
following situation is possible. The LRU flusher issues an LRU flush
request for an instance. buf_do_LRU_batch decides to perform
unzip_LRU eviction and this eviction might fully satisfy the
request. Then buf_flush_LRU_tail checks the number of flushed pages in
the last iteration, finds it to be zero, and wrongly decides not to
flush that instance anymore.
Fixed by maintaining unzip_LRU eviction counter in struct
flush_counter_t variables, and checking it in buf_flush_LRU_tail when
deciding whether to stop flushing the current instance.
Added test cases for new configuration files to get mysql-test-run suite sys_vars
to pass. Fix some small errors.
innodb_force_primary_key default off. If option is true, create table without
primary key or unique key where all keyparts are NOT NULL is not
accepted. Instead an error message is printed. Variable value can
be changed with set global innodb_force_primary_key = <value>.
