comment can't be read back
A change to the lexer in 5.1 caused slash-asterisk-bang-version
sections to be terminated early if there exists a slash-asterisk-
style comment inside it. Nesting comments is usually illegal,
but we rely on versioned comment blocks in mysqldump, and the
contents of those sections must be allowed to have comments.
The problem was that when encountering open-comment tokens and
consuming -or- passing through the contents, the "in_comment"
state at the end was clobbered with the not-in-a-comment value,
regardless of whether we were in a comment before this or not.
So, """/*!VER one /* two */ three */""" would lose its in-comment
state between "two" and "three". Save the echo and in-comment
state, and restore it at the end of the comment if we consume a
comment.
comment can't be read back
A change to the lexer in 5.1 caused slash-asterisk-bang-version
sections to be terminated early if there exists a slash-asterisk-
style comment inside it. Nesting comments is usually illegal,
but we rely on versioned comment blocks in mysqldump, and the
contents of those sections must be allowed to have comments.
The problem was that when encountering open-comment tokens and
consuming -or- passing through the contents, the "in_comment"
state at the end was clobbered with the not-in-a-comment value,
regardless of whether we were in a comment before this or not.
So, """/*!VER one /* two */ three */""" would lose its in-comment
state between "two" and "three". Save the echo and in-comment
state, and restore it at the end of the comment if we consume a
comment.
The problem is that a SELECT .. FOR UPDATE statement might open
a table and later wait for a impeding global read lock without
noticing whether it is holding a table that is being waited upon
the the flush phase of the process that took the global read
lock.
The same problem also affected the following statements:
LOCK TABLES .. WRITE
UPDATE .. SET (update and multi-table update)
TRUNCATE TABLE ..
LOAD DATA ..
The solution is to make the above statements wait for a impending
global read lock before opening the tables. If there is no
impending global read lock, the statement raises a temporary
protection against global read locks and progresses smoothly
towards completion.
Important notice: the patch does not try to address all possible
cases, only those which are common and can be fixed unintrusively
enough for 5.0.
mysql-test/r/lock_multi.result:
Add test case result for Bug#43230
mysql-test/t/lock_multi.test:
Add test case for Bug#43230
sql/sql_lex.cc:
Initialize flag.
sql/sql_lex.h:
Add a flag to the lexer.
sql/sql_parse.cc:
Wait for the global read lock is a write lock is going to be
taken. The wait is done before opening tables.
sql/sql_yacc.yy:
Protect against the GRL if its a SELECT .. FOR UPDATE or LOCK TABLES
.. WRITE statement.
The problem is that a SELECT .. FOR UPDATE statement might open
a table and later wait for a impeding global read lock without
noticing whether it is holding a table that is being waited upon
the the flush phase of the process that took the global read
lock.
The same problem also affected the following statements:
LOCK TABLES .. WRITE
UPDATE .. SET (update and multi-table update)
TRUNCATE TABLE ..
LOAD DATA ..
The solution is to make the above statements wait for a impending
global read lock before opening the tables. If there is no
impending global read lock, the statement raises a temporary
protection against global read locks and progresses smoothly
towards completion.
Important notice: the patch does not try to address all possible
cases, only those which are common and can be fixed unintrusively
enough for 5.0.
An unnecessarily restrictive lock were taken on sub-SELECTs during DELETE.
During parsing, a global structure is reused for sub-SELECTs and the attribute
keeping track of lock options were not reset properly.
This patch introduces a new attribute to keep track on the syntactical lock
option elements found in a sub-SELECT and then sets the lock options accordingly.
Now the sub-SELECTs will try to acquire a READ lock if possible
instead of a WRITE lock as inherited from the outer DELETE statement.
mysql-test/r/lock.result:
Added test case for bug39843
mysql-test/t/lock.test:
Added test case for bug39843
sql/sql_lex.cc:
* Reset member variable lock_option on each new query.
sql/sql_lex.h:
* Introduced new member variable 'lock_option' which is keeping track
of the syntactical lock option of a (sub-)select query.
sql/sql_parse.cc:
* Wrote comments to functions.
sql/sql_yacc.yy:
* Introduced an attribute to keep track of syntactical lock options
in sub-selects.
* Made sure that the default value TL_READ_DEFAULT is at the begining
of each subselect-rule.
An unnecessarily restrictive lock were taken on sub-SELECTs during DELETE.
During parsing, a global structure is reused for sub-SELECTs and the attribute
keeping track of lock options were not reset properly.
This patch introduces a new attribute to keep track on the syntactical lock
option elements found in a sub-SELECT and then sets the lock options accordingly.
Now the sub-SELECTs will try to acquire a READ lock if possible
instead of a WRITE lock as inherited from the outer DELETE statement.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Added braces around expressions with &&, ||, & and |
- Added empty line before ; for empty while and for loops
- Added () around if with assignments
- Removed const before function returning simple type
Changed BUILD scripts to not build with NDB
BUILD/SETUP.sh:
By default, don't build ndb with --max in Maria tree.
NDB is not kept up to date anyway in 5.1
client/mysql.cc:
Added braces around && to get rid of compiler warnings
sql/event_db_repository.cc:
Added braces around && to get rid of compiler warnings
sql/events.cc:
Added braces around && to get rid of compiler warnings
sql/field.cc:
Added braces around && to get rid of compiler warnings
Fixed for loops
sql/field.h:
Added braces around & to get rid of compiler warnings
sql/field_conv.cc:
Added braces around && to get rid of compiler warnings
Fixed bug when copying between DATETIME fields and strict dates are used
Removed not needeed else
sql/gstream.cc:
Added braces around && to get rid of compiler warnings
sql/ha_ndbcluster.cc:
Added braces around && to get rid of compiler warnings
Added {} to get rid of compiler warnings
sql/handler.cc:
Added braces around && to get rid of compiler warnings
sql/item.cc:
Added braces around && to get rid of compiler warnings
sql/item_cmpfunc.cc:
Added braces around && to get rid of compiler warnings
Removed some not needed space
sql/item_func.cc:
Added braces around && to get rid of compiler warnings
sql/item_strfunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_subselect.cc:
Added braces around && to get rid of compiler warnings
sql/item_sum.cc:
Added braces around && to get rid of compiler warnings
sql/item_timefunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_xmlfunc.cc:
Added empty line before ; for empty while and for loops
sql/log.cc:
Added braces around && to get rid of compiler warnings
sql/log_event.cc:
Added braces around && to get rid of compiler warnings
Removed not needed else
sql/log_event_old.cc:
Added braces around && to get rid of compiler warnings
sql/opt_range.cc:
Added braces around && to get rid of compiler warnings
sql/opt_sum.cc:
Added braces around && to get rid of compiler warnings
sql/set_var.cc:
Added empty line before ; for empty while and for loops
Added () around if with assignments
sql/slave.cc:
Added braces around && to get rid of compiler warnings
Added empty line before ; for empty while and for loops
sql/spatial.h:
Added braces around && to get rid of compiler warnings
sql/sql_acl.cc:
Added braces around && to get rid of compiler warnings
sql/sql_analyse.cc:
Added empty line before ; for empty while and for loops
sql/sql_base.cc:
Added braces around && to get rid of compiler warnings
sql/sql_connect.cc:
Added braces around && to get rid of compiler warnings
sql/sql_db.cc:
Added braces around && to get rid of compiler warnings
sql/sql_delete.cc:
Added braces around && to get rid of compiler warnings
sql/sql_help.cc:
Added empty line before ; for empty while and for loops
sql/sql_insert.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
sql/sql_lex.cc:
Cast char array references to uchar; Fixed wrong array referencing when using characters > ASCII 128 in SQL statments
Added empty line before ; for empty while and for loops
Trivial indent fixes
Added braces around && to get rid of compiler warnings
sql/sql_load.cc:
Added braces around && to get rid of compiler warnings
sql/sql_parse.cc:
Added braces around && to get rid of compiler warnings
sql/sql_partition.cc:
Added braces around && to get rid of compiler warnings
sql/sql_plugin.cc:
Fixed bug in detecing if option variable should be readonly
Added empty line before ; for empty while and for loops
sql/sql_prepare.cc:
Added braces around && to get rid of compiler warnings
sql/sql_select.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
Added empty line before ; for empty while and for loops
sql/sql_show.cc:
Added braces around && to get rid of compiler warnings
sql/sql_table.cc:
Added braces around && to get rid of compiler warnings
sql/sql_trigger.cc:
Added braces around && to get rid of compiler warnings
sql/sql_update.cc:
Added braces around && to get rid of compiler warnings
sql/sql_yacc.yy:
Added braces around && to get rid of compiler warnings
sql/table.cc:
Added braces around && to get rid of compiler warnings
sql/table.h:
Added braces around && to get rid of compiler warnings
sql/time.cc:
Added braces around && to get rid of compiler warnings
sql/tztime.cc:
Added braces around && to get rid of compiler warnings
sql/uniques.cc:
Added braces around && to get rid of compiler warnings
storage/federated/ha_federated.cc:
Fixed bug in testing of variable to ha_info() (Not critical)
storage/heap/ha_heap.cc:
Added braces around && to get rid of compiler warnings
storage/maria/ha_maria.cc:
Fixed bug: Mark that maria_log_dir_path is readonly
Added braces around && to get rid of compiler warnings
storage/ndb/include/ndbapi/NdbEventOperation.hpp:
Removed const before function returning simple type
storage/ndb/include/ndbapi/NdbOperation.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/Ndb.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/NdbEventOperation.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbRecAttr.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/TransporterFacade.hpp:
Added braces around && to get rid of compiler warnings
Related to operator precedence and associativity.
Make the expressions as explicit as possible.
sql/field.h:
Silence gcc-4.3 warning: be more explicit.
sql/item.cc:
Silence gcc-4.3 warning: be more explicit.
sql/item_sum.cc:
Silence gcc-4.3 warning: be more explicit.
sql/log_event.cc:
Silence gcc-4.3 warning: be more explicit.
sql/spatial.h:
Silence gcc-4.3 warning: be more explicit.
sql/sql_lex.cc:
Silence gcc-4.3 warning: be more explicit.
sql/table.h:
Silence gcc-4.3 warning: be more explicit.
storage/federated/ha_federated.cc:
Fix operator precedence bug.
storage/heap/ha_heap.cc:
Silence gcc-4.3 warning: be more explicit.
The problem is that the offset argument of the limit clause
might be truncated on a 32-bits server built without big
tables support. The truncation was happening because the
original 64-bits long argument was being cast to a 32-bits
(ha_rows) offset counter.
The solution is to check if the conversing resulted in value
truncation and if so, the offset is set to the maximum possible
value that can fit on the type.
mysql-test/r/limit.result:
Add test case result for Bug#37075
mysql-test/t/limit.test:
Add test case for Bug#37075
sql/sql_lex.cc:
Check for truncation of the offset value. If value was
truncated, set to the maximum possible value.
The problem is that the offset argument of the limit clause
might be truncated on a 32-bits server built without big
tables support. The truncation was happening because the
original 64-bits long argument was being cast to a 32-bits
(ha_rows) offset counter.
The solution is to check if the conversing resulted in value
truncation and if so, the offset is set to the maximum possible
value that can fit on the type.
``FLUSH TABLES WITH READ LOCK''
Concurrent execution of 1) multitable update with a
NATURAL/USING join and 2) a such query as "FLUSH TABLES
WITH READ LOCK" or "ALTER TABLE" of updating table led
to a server crash.
The mysql_multi_update_prepare() function call is optimized
to lock updating tables only, so it postpones locking to
the last, and if locking fails, it does cleanup of modified
syntax structures and repeats a query analysis. However,
that cleanup procedure was incomplete for NATURAL/USING join
syntax data: 1) some Field_item items pointed into freed
table structures, and 2) the TABLE_LIST::join_columns fields
was not reset.
Major change:
short-living Field *Natural_join_column::table_field has
been replaced with long-living Item*.
mysql-test/r/lock_multi.result:
Added test case for bug #38691.
mysql-test/t/lock_multi.test:
Added test case for bug #38691.
sql/item.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
The Item_field constructor has been modified to allocate
and copy original database/table/field names always (not
during PS preparation/1st execution only), because
an initialization of Item_field items with a pointer to
short-living Field structures is a common practice.
sql/sql_base.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
1) Type adjustment for Natural_join_column::table_field
(Field to Item_field);
2) The setup_natural_join_row_types function has been
updated to take into account new
first_natural_join_processing flag to skip unnecessary
reinitialization of Natural_join_column::join_columns
during table reopening after lock_tables() failure
(like the 'first_execution' flag for PS).
sql/sql_lex.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Initialization of the new
st_select_lex::first_natural_join_processing flag has
been added.
sql/sql_lex.h:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
The st_select_lex::first_natural_join_processing flag
has been added to skip unnecessary rebuilding of
NATURAL/USING JOIN structures during table reopening
after lock_tables failure.
sql/sql_update.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Extra cleanup calls have been added to reset
Natural_join_column::table_field items.
sql/table.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Type adjustment for Natural_join_column::table_field
(Field to Item_field).
sql/table.h:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Type of the Natural_join_column::table_field field has
been changed from Field that points into short-living
TABLE memory to long-living Item_field that can be
linked to (fixed) reopened table.
``FLUSH TABLES WITH READ LOCK''
Concurrent execution of 1) multitable update with a
NATURAL/USING join and 2) a such query as "FLUSH TABLES
WITH READ LOCK" or "ALTER TABLE" of updating table led
to a server crash.
The mysql_multi_update_prepare() function call is optimized
to lock updating tables only, so it postpones locking to
the last, and if locking fails, it does cleanup of modified
syntax structures and repeats a query analysis. However,
that cleanup procedure was incomplete for NATURAL/USING join
syntax data: 1) some Field_item items pointed into freed
table structures, and 2) the TABLE_LIST::join_columns fields
was not reset.
Major change:
short-living Field *Natural_join_column::table_field has
been replaced with long-living Item*.
columns data types
The "SELECT @lastId, @lastId := Id FROM t" query returns
different result sets depending on the type of the Id column
(INT or BIGINT).
Note: this fix doesn't cover the case when a select query
references an user variable and stored function that
updates a value of that variable, in this case a result
is indeterminate.
The server uses incorrect assumption about a constantness of
an user variable value as a select list item:
The server caches a last query number where that variable
was changed and compares this number with a current query
number. If these numbers are different, the server guesses,
that the variable is not updating in the current query, so
a respective select list item is a constant. However, in some
common cases the server updates cached query number too late.
The server has been modified to memorize user variable
assignments during the parse phase to take them into account
on the next (query preparation) phase independently of the
order of user variable references/assignments in a select
item list.
mysql-test/r/user_var.result:
Added test case for bug #26020.
mysql-test/t/user_var.test:
Added test case for bug #26020.
sql/item_func.cc:
An update of entry and update_query_id variables has been
moved from Item_func_set_user_var::fix_fields() to a separate
method, Item_func_set_user_var::set_entry().
sql/item_func.h:
1. The Item_func_set_user_var::set_entry() method has been
added to update Item_func_set_user_var::entry.
2. The Item_func_set_user_var::entry_thd field has beend
added to update Item_func_set_user_var::entry only when
needed.
sql/sql_base.cc:
Fix: setup_fiedls() calls Item_func_set_user_var::set_entry()
for all items from the thd->lex->set_var_list before the first
call of ::fix_fields().
sql/sql_lex.cc:
The lex_start function has been modified to reset
the st_lex::set_var_list list.
sql/sql_lex.h:
New st_lex::set_var_list field has been added to
memorize all user variable assignments in the current
select query.
sql/sql_yacc.yy:
The variable_aux rule has been modified to memorize
in-query user variable assignments in the
st_lex::set_var_list list.
columns data types
The "SELECT @lastId, @lastId := Id FROM t" query returns
different result sets depending on the type of the Id column
(INT or BIGINT).
Note: this fix doesn't cover the case when a select query
references an user variable and stored function that
updates a value of that variable, in this case a result
is indeterminate.
The server uses incorrect assumption about a constantness of
an user variable value as a select list item:
The server caches a last query number where that variable
was changed and compares this number with a current query
number. If these numbers are different, the server guesses,
that the variable is not updating in the current query, so
a respective select list item is a constant. However, in some
common cases the server updates cached query number too late.
The server has been modified to memorize user variable
assignments during the parse phase to take them into account
on the next (query preparation) phase independently of the
order of user variable references/assignments in a select
item list.
build)
The crash was caused by freeing the internal parser stack during the parser
execution.
This occured only for complex stored procedures, after reallocating the parser
stack using my_yyoverflow(), with the following C call stack:
- MYSQLparse()
- any rule calling sp_head::restore_lex()
- lex_end()
- x_free(lex->yacc_yyss), xfree(lex->yacc_yyvs)
The root cause is the implementation of stored procedures, which breaks the
assumption from 4.1 that there is only one LEX structure per parser call.
The solution is to separate the LEX structure into:
- attributes that represent a statement (the current LEX structure),
- attributes that relate to the syntax parser itself (Yacc_state),
so that parsing multiple statements in stored programs can create multiple
LEX structures while not changing the unique Yacc_state.
Now, Yacc_state and the existing Lex_input_stream are aggregated into
Parser_state, a structure that represent the complete state of the (Lexical +
Syntax) parser.
mysql-test/r/parser_stack.result:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
mysql-test/t/parser_stack.test:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sp.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sp_head.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_class.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_class.h:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_lex.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_lex.h:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_parse.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_prepare.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_trigger.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_view.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_yacc.yy:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
build)
The crash was caused by freeing the internal parser stack during the parser
execution.
This occured only for complex stored procedures, after reallocating the parser
stack using my_yyoverflow(), with the following C call stack:
- MYSQLparse()
- any rule calling sp_head::restore_lex()
- lex_end()
- x_free(lex->yacc_yyss), xfree(lex->yacc_yyvs)
The root cause is the implementation of stored procedures, which breaks the
assumption from 4.1 that there is only one LEX structure per parser call.
The solution is to separate the LEX structure into:
- attributes that represent a statement (the current LEX structure),
- attributes that relate to the syntax parser itself (Yacc_state),
so that parsing multiple statements in stored programs can create multiple
LEX structures while not changing the unique Yacc_state.
Now, Yacc_state and the existing Lex_input_stream are aggregated into
Parser_state, a structure that represent the complete state of the (Lexical +
Syntax) parser.
