The following 6.0 revisions were analyzed:
- sp1r-brian@zim.(none)-20071228102738-21894
- sp1r-brian@zim.(none)-20071228121841-56447
- sp1r-brian@zim.(none)-20071228205403-56423
- sp1r-brian@zim.(none)-20071228221139-55341
- sp1r-brian@zim.(none)-20071228233443-55352
- sp1r-brian@zim.(none)-20071229094527-61763
- sp1r-brian@zim.(none)-20071230203739-61746
- sp1r-brian@zim.(none)-20080102213805-61741
- sp1r-brian@zim.(none)-20080103201041-61746
- sp1r-brian@zim.(none)-20080104234927-59875
- sp1r-brian@zim.(none)-20080105005827-59874
- sp1r-brian@zim.(none)-20080105012020-59865
- sp1r-brian@zim.(none)-20080106003858-59857
- sp1r-brian@zim.(none)-20080123195552-31680
- sp1r-brian@zim.(none)-20080124201848-29999
- sp1r-brian@zim.(none)-20080129075144-36991
- sp1r-cbell/Chuck@mysql_cab_desk.-20080215041806-21954
- sp1r-vvaintroub@wva.-20080212124547-06272
- sp1r-dfischer/mysqldev@mysql.com/production.mysql.com-20071223184258-15140
- sp1r-brian@zim.(none)-20080206122216-35774
- sp1r-baker@bk-internal.mysql.com-20080209005622-35947
- sp1r-baker@bk-internal.mysql.com-20080224215608-24613
- sp1r-baker@bk-internal.mysql.com-20080307170710-63543
- sp1r-baker@bk-internal.mysql.com-20080312233205-13069
- sp1r-Reggie@core.-20080402175211-28643
- kpettersson@mysql.com-20080901101150-4ne74r8v0492vv42
- alik@sun.com-20090805173811-9fzt0ymcp9tsvn7k
- alik@sun.com-20090805173937-fcv1fdveodq5x9gb
- alik@sun.com-20090805175009-g1od16i3t1xkw2qr
- kostja@sun.com-20090805200643-j9i4fy7ii8ijho5c
- alik@sun.com-20090807195303-j4fb5m4l1dgdahwo
- alik@sun.com-20090808114848-3rkzr9kifrijzaqy
- alik@sun.com-20090810041739-ugmx34h34uid8mox
- alik@sun.com-20090810105306-rf43rfyzzblsy5e7
- alik@sun.com-20090810123113-ccdjwai68b5woqdm
- alik@sun.com-20090811080423-gb7pibec1znaydzy
- alik@sun.com-20090811082130-5uckar1vx3kdsw7g
- alik@sun.com-20090812202051-uqkfwwxxcjvo5ean
The following bugfixes are also backported within this patch:
- Bug#34292: netdb.h missing in hostname.cc
- Bug#39153: Failing to lookup a host name can lead to crash
in current IPv6 implementation
- Bug#38247: Server does not resolve connecting ip's
- Bug#43006: main.skip_name_resolve fails on Windows in PB2
- Bug#45606: ACL requires IPv4-mapped addresses to be used
- Bug#45584: Host name cache does not work as a cache
The following 6.0 revisions were analyzed:
- sp1r-brian@zim.(none)-20071228102738-21894
- sp1r-brian@zim.(none)-20071228121841-56447
- sp1r-brian@zim.(none)-20071228205403-56423
- sp1r-brian@zim.(none)-20071228221139-55341
- sp1r-brian@zim.(none)-20071228233443-55352
- sp1r-brian@zim.(none)-20071229094527-61763
- sp1r-brian@zim.(none)-20071230203739-61746
- sp1r-brian@zim.(none)-20080102213805-61741
- sp1r-brian@zim.(none)-20080103201041-61746
- sp1r-brian@zim.(none)-20080104234927-59875
- sp1r-brian@zim.(none)-20080105005827-59874
- sp1r-brian@zim.(none)-20080105012020-59865
- sp1r-brian@zim.(none)-20080106003858-59857
- sp1r-brian@zim.(none)-20080123195552-31680
- sp1r-brian@zim.(none)-20080124201848-29999
- sp1r-brian@zim.(none)-20080129075144-36991
- sp1r-cbell/Chuck@mysql_cab_desk.-20080215041806-21954
- sp1r-vvaintroub@wva.-20080212124547-06272
- sp1r-dfischer/mysqldev@mysql.com/production.mysql.com-20071223184258-15140
- sp1r-brian@zim.(none)-20080206122216-35774
- sp1r-baker@bk-internal.mysql.com-20080209005622-35947
- sp1r-baker@bk-internal.mysql.com-20080224215608-24613
- sp1r-baker@bk-internal.mysql.com-20080307170710-63543
- sp1r-baker@bk-internal.mysql.com-20080312233205-13069
- sp1r-Reggie@core.-20080402175211-28643
- kpettersson@mysql.com-20080901101150-4ne74r8v0492vv42
- alik@sun.com-20090805173811-9fzt0ymcp9tsvn7k
- alik@sun.com-20090805173937-fcv1fdveodq5x9gb
- alik@sun.com-20090805175009-g1od16i3t1xkw2qr
- kostja@sun.com-20090805200643-j9i4fy7ii8ijho5c
- alik@sun.com-20090807195303-j4fb5m4l1dgdahwo
- alik@sun.com-20090808114848-3rkzr9kifrijzaqy
- alik@sun.com-20090810041739-ugmx34h34uid8mox
- alik@sun.com-20090810105306-rf43rfyzzblsy5e7
- alik@sun.com-20090810123113-ccdjwai68b5woqdm
- alik@sun.com-20090811080423-gb7pibec1znaydzy
- alik@sun.com-20090811082130-5uckar1vx3kdsw7g
- alik@sun.com-20090812202051-uqkfwwxxcjvo5ean
The following bugfixes are also backported within this patch:
- Bug#34292: netdb.h missing in hostname.cc
- Bug#39153: Failing to lookup a host name can lead to crash
in current IPv6 implementation
- Bug#38247: Server does not resolve connecting ip's
- Bug#43006: main.skip_name_resolve fails on Windows in PB2
- Bug#45606: ACL requires IPv4-mapped addresses to be used
- Bug#45584: Host name cache does not work as a cache
----------------------------------------------------------------------
ChangeSet@1.2571, 2008-04-08 12:30:06+02:00, vvaintroub@wva. +122 -0
Bug#32082 : definition of VOID in my_global.h conflicts with Windows
SDK headers
VOID macro is now removed. Its usage is replaced with void cast.
In some cases, where cast does not make much sense (pthread_*, printf,
hash_delete, my_seek), cast is ommited.
This is the non-ndb part of the patch.
The return value of mysql_bin_log.write was ignored by most callers,
which may lead to inconsistent on master and slave if the transaction
was committed while the binlog was not correctly written. If
my_error() is call in mysql_bin_log.write, this could also lead to
assertion issue if my_ok() or my_error() is called after.
This fixed the problem by let the caller to check and handle the
return value of mysql_bin_log.write. This patch only adresses the
simple cases.
mysql-test/include/binlog_inject_error.inc:
inject binlog write error when doing a query
mysql-test/suite/binlog/t/binlog_write_error.test:
Simple test case to check if proper error is reported when injecting binlog write errors.
sql/events.cc:
check return value of mysql_bin_log.write
sql/log.cc:
check return value of mysql_bin_log.write
sql/log_event.cc:
check return value of mysql_bin_log.write
sql/log_event_old.cc:
check return value of mysql_bin_log.write
sql/mysql_priv.h:
Change write_bin_log to return int instead of void
sql/rpl_injector.cc:
check return value of writing binlog
sql/sp.cc:
check return value of writing binlog
sql/sp_head.cc:
return 1 if writing binlog failed
sql/sql_acl.cc:
check return value of writing binlog
sql/sql_base.cc:
check return value of writing binlog
sql/sql_class.h:
Change binlog_show_create_table to return int
sql/sql_db.cc:
Change write_to_binlog to return int
check return value of writing binlog
sql/sql_delete.cc:
check return value of writing binlog
sql/sql_insert.cc:
check return value of writing binlog
sql/sql_load.cc:
check return value of writing binlog
sql/sql_parse.cc:
check return value of writing binlog
sql/sql_partition.cc:
check return value of writing binlog
sql/sql_rename.cc:
check return value of writing binlog
sql/sql_repl.cc:
check return value of writing binlog
sql/sql_table.cc:
Change write_bin_log to return int, and return 1 if there was error writing binlog
sql/sql_tablespace.cc:
check return value of writing binlog
sql/sql_trigger.cc:
check return value of writing binlog
sql/sql_udf.cc:
check return value of writing binlog
sql/sql_update.cc:
check return value of writing binlog
sql/sql_view.cc:
check return value of writing binlog
This is the non-ndb part of the patch.
The return value of mysql_bin_log.write was ignored by most callers,
which may lead to inconsistent on master and slave if the transaction
was committed while the binlog was not correctly written. If
my_error() is call in mysql_bin_log.write, this could also lead to
assertion issue if my_ok() or my_error() is called after.
This fixed the problem by let the caller to check and handle the
return value of mysql_bin_log.write. This patch only adresses the
simple cases.
The problem is that the server could crash when attempting
to access a non-conformant proc system table. One such case
was a crash when invoking stored procedure related statements
on a 5.1 server with a proc system table in the 5.0 format.
The solution is to validate the proc system table format
before attempts to access it are made. If the table is not
in the format that the server expects, a message is written
to the error log and the statement that caused the table to
be accessed fails.
mysql-test/r/sp-destruct.result:
Add test case result for Bug#41726
mysql-test/t/sp-destruct.test:
Add test case for Bug#41726
sql/event_db_repository.cc:
Update code to use new structures.
sql/sp.cc:
Describe the proc table format and use it to validate when
opening a instance of the table.
Add a check to insure that a error message is written to
the error log only once.
sql/sql_acl.cc:
Remove unused variable and use new structure.
sql/sql_acl.h:
Export field definition.
sql/table.cc:
Accept the field count and definition in a single structure.
sql/table.h:
Combine the field count and definition in a single structure.
Transform function into a class in order to support different
ways of reporting a error.
Add a pointer cache to TABLE_SHARE.
Not all my_hash_insert() calls are checked for return value.
This patch adds appropriate checks and failure responses
where needed.
mysys/hash.c:
* Debug hook for testing failures in my_hash_insert()
The problem is that the server could crash when attempting
to access a non-conformant proc system table. One such case
was a crash when invoking stored procedure related statements
on a 5.1 server with a proc system table in the 5.0 format.
The solution is to validate the proc system table format
before attempts to access it are made. If the table is not
in the format that the server expects, a message is written
to the error log and the statement that caused the table to
be accessed fails.
port from mysql-next (5.4) to mysql-next-mr-bugfixing (5.5/5.6?)
2755 Konstantin Osipov 2008-11-27
Bug#32115 will remove the pre-requisite to initialize LEX to open tables.
This dependency was added in 5.1 and was supposed to be removed in 6.0.
Remove asserts and initialization of LEX in places where we don't deal
with partitioned tables.
sql/sp_head.cc:
Fix a typo.
port from mysql-next (5.4) to mysql-next-mr-bugfixing (5.5/5.6?)
2755 Konstantin Osipov 2008-11-27
Bug#32115 will remove the pre-requisite to initialize LEX to open tables.
This dependency was added in 5.1 and was supposed to be removed in 6.0.
Remove asserts and initialization of LEX in places where we don't deal
with partitioned tables.
- Moved some code from innodb_plugin to xtradb, to ensure that all tests runs
- Did changes in pbxt and maria storage engines becasue of changes in thd->query
- Reverted wrong code in sql_table.cc for how ROW_FORMAT is used.
This is a re-commit of Monty's merge to eliminate an extra commit from
MySQL-5.1.42 that was accidentally included in the merge.
This is a merge of the MySQL 5.1.41 clone-off (clone-5.1.41-build). In
case there are any extra changes done before final MySQL 5.1.41
release, these will need to be merged later before MariaDB 5.1.41
release.
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
CURRENT_USER() in GRANT ... TO CURRENT_USER() only gave us a definer,
not a full user (i.e., password-element was not initiliazed). Hence
dereferencing the password led to a crash.
Properly initializes definers now, just so there are no misunderstandings.
Also does some magic so IDENTIFIED BY ... works with CURRENT_USER().
mysql-test/r/grant2.result:
Show GRANT ... TO CURRENT_USER() no longer crashes.
Show it to work with IDENTIFIED BY to boot.
mysql-test/t/grant2.test:
Show GRANT ... TO CURRENT_USER() no longer crashes.
Show it to work with IDENTIFIED BY to boot.
sql/sql_acl.cc:
Make IDENTIFIED BY ... work with CURRENT_USER()
sql/sql_parse.cc:
Zero password-part of definer just in case somebody mistakes this for
a complete LEX_USER!
CURRENT_USER() in GRANT ... TO CURRENT_USER() only gave us a definer,
not a full user (i.e., password-element was not initiliazed). Hence
dereferencing the password led to a crash.
Properly initializes definers now, just so there are no misunderstandings.
Also does some magic so IDENTIFIED BY ... works with CURRENT_USER().
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
mysql-test/include/have_case_insensitive_fs.inc:
test case
mysql-test/r/case_insensitive_fs.require:
test case
mysql-test/r/grant_lowercase_fs.result:
test result
mysql-test/r/lowercase_fs_off.result:
test result
mysql-test/r/ps_grant.result:
test result
mysql-test/r/system_mysql_db.result:
changed Routine_name field collation to case insensitive
mysql-test/t/grant_lowercase_fs.test:
test case
mysql-test/t/lowercase_fs_off.test:
test case
scripts/mysql_system_tables.sql:
changed Routine_name field collation to case insensitive
scripts/mysql_system_tables_fix.sql:
changed Routine_name field collation to case insensitive
sql/sql_acl.cc:
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
