post-merge changes:
* handle password expiration on old tables like everything else -
make changes in memory, even if they cannot be done on disk
* merge "debug" tests with non-debug tests, they don't use dbug anyway
* only run rpl password expiration in MIXED mode, it doesn't replicate
anything, so no need to repeat it thrice
* restore update_user_table_password() prototype, it should not change
ACL_USER, this is done in acl_user_update()
* don't parse json twice in get_password_lifetime and get_password_expired
* remove LEX_USER::is_changing_password, see if there was any auth instead
* avoid overflow in expiration calculations
* don't initialize Account_options in the constructor, it's bzero-ed later
* don't create ulong sysvars - they're not portable, prefer uint or ulonglong
* misc simplifications
This patch adds support for expiring user passwords.
The following statements are extended:
CREATE USER user@localhost PASSWORD EXPIRE [option]
ALTER USER user@localhost PASSWORD EXPIRE [option]
If no option is specified, the password is expired with immediate
effect. If option is DEFAULT, global policy applies according to
the default_password_lifetime system var (if 0, password never
expires, if N, password expires every N days). If option is NEVER,
the password never expires and if option is INTERVAL N DAY, the
password expires every N days.
The feature also supports the disconnect_on_expired_password system
var and the --connect-expired-password client option.
Closes#1166
The variable controls the amount of sampling analyze table performs.
If ANALYZE table with histogram collection is too slow, one can reduce the
time taken by setting analyze_sample_percentage to a lower value of the
total number of rows.
Setting it to 0 will use a formula to compute how many rows to sample:
The number of rows collected is capped to a minimum of 50000 and
increases logarithmically with a coffecient of 4096. The coffecient is
chosen so that we expect an error of less than 3% in our estimations
according to the paper:
"Random Sampling for Histogram Construction: How much is enough?”
– Surajit Chaudhuri, Rajeev Motwani, Vivek Narasayya, ACM SIGMOD, 1998.
The drawback of sampling is that avg_frequency number is computed
imprecisely and will yeild a smaller number than the real one.
Condition can be pushed from the HAVING clause into the WHERE clause
if it depends only on the fields that are used in the GROUP BY list
or depends on the fields that are equal to grouping fields.
Aggregate functions can't be pushed down.
How the pushdown is performed on the example:
SELECT t1.a,MAX(t1.b)
FROM t1
GROUP BY t1.a
HAVING (t1.a>2) AND (MAX(c)>12);
=>
SELECT t1.a,MAX(t1.b)
FROM t1
WHERE (t1.a>2)
GROUP BY t1.a
HAVING (MAX(c)>12);
The implementation scheme:
1. Extract the most restrictive condition cond from the HAVING clause of
the select that depends only on the fields that are used in the GROUP BY
list of the select (directly or indirectly through equalities)
2. Save cond as a condition that can be pushed into the WHERE clause
of the select
3. Remove cond from the HAVING clause if it is possible
The optimization is implemented in the function
st_select_lex::pushdown_from_having_into_where().
New test file having_cond_pushdown.test is created.
This task involves the implementation for the optimizer trace.
This feature produces a trace for any SELECT/UPDATE/DELETE/,
which contains information about decisions taken by the optimizer during
the optimization phase (choice of table access method, various costs,
transformations, etc). This feature would help to tell why some decisions were
taken by the optimizer and why some were rejected.
Trace is session-local, controlled by the @@optimizer_trace variable.
To enable optimizer trace we need to write:
set @@optimizer_trace variable= 'enabled=on';
To display the trace one can run:
SELECT trace FROM INFORMATION_SCHEMA.OPTIMIZER_TRACE;
This task also involves:
MDEV-18489: Limit the memory used by the optimizer trace
introduces a switch optimizer_trace_max_mem_size which limits
the memory used by the optimizer trace. This was implemented by
Sergei Petrunia.
Part of MDEV-5336 Implement LOCK FOR BACKUP
- Changed check of Global_only_lock to also include BACKUP lock.
- We store latest MDL_BACKUP_DDL lock in thd->mdl_backup_ticket to be able
to downgrade lock during copy_data_between_tables()
Added to new values to the server variable use_stat_tables.
The values are COMPLEMENTARY_FOR_QUERIES and PREFERABLY_FOR_QUERIES.
Both these values don't allow to collect EITS for queries like
analyze table t1;
To collect EITS we would need to use the syntax with persistent like
analyze table t1 persistent for columns (col1,col2...) index (idx1, idx2...) / ALL
Changing the default value from NEVER to PREFERABLY_FOR_QUERIES.
This patch introduces support for the system variable eq_range_index_dive_limit
that existed in MySQL starting from 5.6. The variable sets a limit for
index dives into equality ranges. Index dives are performed by optimizer
to estimate the number of rows in range scans. Index dives usually provide
good estimate but they are pretty expensive. To estimate the number of rows
in equality ranges statistical data on indexes can be employed. Its usage gives
not so good estimates but it's cheap. So if the number of equality dives
required by an index scan exceeds the set limit no dives for equality
ranges are performed by the optimizer for this index.
As the new system variable is introduced in a stable version the default
value for it is set to a special value meaning there is no limit for the number
of index dives performed by the optimizer.
The patch partially uses the MySQL code for WL 5957
'Statistics-based Range optimization for many ranges'.
The logic and the implementation scheme are similar with the
MDEV-9197 Pushdown conditions into non-mergeable views/derived tables
How the push down is made on the example:
select * from t1
where a>3 and b>10 and
(a,b) in (select x,max(y) from t2 group by x);
-->
select * from t1
where a>3 and b>10 and
(a,b) in (select x,max(y)
from t2
where x>3
group by x
having max(y)>10);
The implementation scheme:
1. Search for the condition cond that depends only on the fields
from the left part of the IN subquery (left_part)
2. Find fields F_group in the select of the right part of the
IN subquery (right_part) that are used in the GROUP BY
3. Extract from the cond condition cond_where that depends only on the
fields from the left_part that stay at the same places in the left_part
(have the same indexes) as the F_group fields in the projection of the
right_part
4. Transform cond_where so it can be pushed into the WHERE clause of the
right_part and delete cond_where from the cond
5. Transform cond so it can be pushed into the HAVING clause of the right_part
The optimization is made in the
Item_in_subselect::pushdown_cond_for_in_subquery() and is controlled by the
variable condition_pushdown_for_subquery.
New test file in_subq_cond_pushdown.test is created.
There are also some changes made for setup_jtbm_semi_joins().
Now it is decomposed into the 2 procedures: setup_degenerate_jtbm_semi_joins()
that is called before optimize_cond() for cond and setup_jtbm_semi_joins()
that is called after optimize_cond().
New setup_jtbm_semi_joins() is made in the way so that the result of its work is
the same as if it was called before optimize_cond().
The code that is common for pushdown into materialized derived and into materialized
IN subqueries is factored out into pushdown_cond_for_derived(),
Item_in_subselect::pushdown_cond_for_in_subquery() and
st_select_lex::pushdown_cond_into_where_clause().
Introduced new alter algorithm type called NOCOPY & INSTANT for
inplace alter operation.
NOCOPY - Algorithm refuses any alter operation that would
rebuild the clustered index. It is a subset of INPLACE algorithm.
INSTANT - Algorithm allow any alter operation that would
modify only meta data. It is a subset of NOCOPY algorithm.
Introduce new variable called alter_algorithm. The values are
DEFAULT(0), COPY(1), INPLACE(2), NOCOPY(3), INSTANT(4)
Message to deprecate old_alter_table variable and make it alias
for alter_algorithm variable.
alter_algorithm variable for slave is always set to default.
MDEV--15609 engines/funcs.crash_manytables_number crashes with error 24
(too many open files)
MDEV-10286 Adjustment of table_open_cache according to system limits
does not work when open-files-limit option is provided
Fixed by adjusting tc_size downwards if there is not enough file
descriptors to use.
Other changes:
- Ensure that there is 30 (was 10) extra file descriptors for other usage
- Decrease TABLE_OPEN_CACHE_MIN to 200 as it's better to have a smaller
table cache than getting error 24
- Increase minimum of max_connections and table_open_cache from 1 to 10
as 1 is not usable for any real application, only for testing.
- CREATE PACKAGE [BODY] statements are now
entirely written to mysql.proc with type='PACKAGE' and type='PACKAGE BODY'.
- CREATE PACKAGE BODY now supports IF NOT EXISTS
- DROP PACKAGE BODY now supports IF EXISTS
- CREATE OR REPLACE PACKAGE [BODY] is now supported
- CREATE PACKAGE [BODY] now support the DEFINER clause:
CREATE DEFINER user@host PACKAGE pkg ... END;
CREATE DEFINER user@host PACKAGE BODY pkg ... END;
- CREATE PACKAGE [BODY] now supports SQL SECURITY and COMMENT clauses, e.g.:
CREATE PACKAGE p1 SQL SECURITY INVOKER COMMENT "comment" AS ... END;
- Package routines are now created from the package CREATE PACKAGE BODY
statement and don't produce individual records in mysql.proc.
- CREATE PACKAGE BODY now supports package-wide variables.
Package variables can be read and set inside package routines.
Package variables are stored in a separate sp_rcontext,
which is cached in THD on the first packate routine call.
- CREATE PACKAGE BODY now supports the initialization section.
- All public routines (i.e. declared in CREATE PACKAGE)
must have implementations in CREATE PACKAGE BODY
- Only public package routines are available outside of the package
- {CREATE|DROP} PACKAGE [BODY] now respects CREATE ROUTINE and ALTER ROUTINE
privileges
- "GRANT EXECUTE ON PACKAGE BODY pkg" is now supported
- SHOW CREATE PACKAGE [BODY] is now supported
- SHOW PACKAGE [BODY] STATUS is now supported
- CREATE and DROP for PACKAGE [BODY] now works for non-current databases
- mysqldump now supports packages
- "SHOW {PROCEDURE|FUNCTION) CODE pkg.routine" now works for package routines
- "SHOW PACKAGE BODY CODE pkg" now works (the package initialization section)
- A new package body level MDL was added
- Recursive calls for package procedures are now possible
- Routine forward declarations in CREATE PACKATE BODY are now supported.
- Package body variables now work as SP OUT parameters
- Package body variables now work as SELECT INTO targets
- Package body variables now support ROW, %ROWTYPE, %TYPE
Standard compatible behavior for UPDATE: all assignments in SET
are executed "simultaneously", not left-to-right. And `SET a=b,b=a`
will swap the values.
and the system_versioning_transaction_registry variable.
The user enables transaction registry by specifying BIGINT for
row_start/row_end columns.
check mysql.transaction_registry structure on the first open,
not on startup. Avoid warnings unless transaction_registry
is actually used.
Many related changes.
Note that AS OF condition must always be pushed down to physical tables,
it cannot be applied to a derived or a view. Thus:
* no versioning for internal temporary tables, they can never store
historical data.
* remove special versioning code from mysql_derived_prepare and
remove ER_VERS_DERIVED_PROHIBITED - derived can have no historical
data and cannot be prohibited for system versioning related reasons.
* do not expand select list for derived/views with sys vers fields,
derived/views can never have historical data.
* remove special invisiblity rules for sys vers fields, they are no
longer needed after the previous change
* remove system_versioning_hide, it lost the meaning after the
previous change.
* remove ER_VERS_SYSTEM_TIME_CLASH, it's no "clash", the inner
AS OF clause always wins.
* non-versioned fields in a historical query
reword the warning text, downgrade to note, don't
replace values with NULLs
