BUG#26447 prefer a clustered key for an index scan, as secondary index is always slower
... which was fixed to cause
BUG#35850 queries take 50% longer
... and was reverted
and
BUG#39653 prefer a secondary index for an index scan, as clustered key is always slower
... which was fixed to cause
BUG#55656 mysqldump takes six days instead of half an hour
... and was amended with a special case workaround
sql/opt_range.cc:
move get_index_only_read_time() into the handler class
sql/sql_select.cc:
use cost not an index length when choosing a cheaper index
Fixed compiler warnings
client/mysqlslap.c:
Fixed compiler warnings
mysql-test/suite/maria/r/maria.result:
Test case for LP#614265
mysql-test/suite/maria/t/maria.test:
Test case for LP#614265
mysql-test/suite/pbxt/t/skip_name_resolve-master.opt:
Ensure that we get restart before test (as test uses show processlist)
sql/handler.cc:
Added cloned marker if clone was called (for safety checks & debugging)
sql/handler.h:
Added cloned marker if clone was called (for safety checks & debugging)
storage/maria/ha_maria.cc:
In clone call, set file->trn if cloned file had this set. This is needed as maria_create_trn_for_mysql() and thus file->trn is never set for cloned table.
Ensure that file->trn is properly reset after calls to repair/check/zerofill.
Increment locked table count if file->trn is set (as we decrement this in the unlock call)
tests/mysql_client_test.c:
Fixed compiler warnings
Added 'Aria' as an alias for the Maria storage engine. Real rename is happening in 5.2
sql/handler.cc:
Added 'Aria' as an alias for the Maria storage engine.
The issue was that we didn't always check result of ha_rnd_init() which caused a problem for handlers that returned an error in this code.
- Changed prototype of ha_rnd_init() to ensure that we get a compile warning if result is not checked.
- Added ha_rnd_init_with_error() that prints error on failure.
- Checked all usage of ha_rnd_init() and ensure we generate an error message on failures.
- Changed init_read_record() to return 1 on failure.
sql/create_options.cc:
Fixed wrong printf
sql/event_db_repository.cc:
Check result from init_read_record()
sql/events.cc:
Check result from init_read_record()
sql/filesort.cc:
Check result from ha_rnd_init()
sql/ha_partition.cc:
Check result from ha_rnd_init()
sql/ha_partition.h:
Fixed compiler warning
sql/handler.cc:
Added ha_rnd_init_with_error()
Check result from ha_rnd_init()
sql/handler.h:
Added ha_rnd_init_with_error()
Changed prototype of ha_rnd_init() to ensure that we get a compile warning if result is not checked
sql/item_subselect.cc:
Check result from ha_rnd_init()
sql/log.cc:
Check result from ha_rnd_init()
sql/log_event.cc:
Check result from ha_rnd_init()
sql/log_event_old.cc:
Check result from ha_rnd_init()
sql/mysql_priv.h:
init_read_record() now returns error code on failure
sql/opt_range.cc:
Check result from ha_rnd_init()
sql/records.cc:
init_read_record() now returns error code on failure
Check result from ha_rnd_init()
sql/sql_acl.cc:
Check result from init_read_record()
sql/sql_cursor.cc:
Print error if ha_rnd_init() fails
sql/sql_delete.cc:
Check result from init_read_record()
sql/sql_help.cc:
Check result from init_read_record()
sql/sql_plugin.cc:
Check result from init_read_record()
sql/sql_select.cc:
Check result from ha_rnd_init()
Print error if ha_rnd_init() fails.
sql/sql_servers.cc:
Check result from init_read_record()
sql/sql_table.cc:
Check result from init_read_record()
sql/sql_udf.cc:
Check result from init_read_record()
sql/sql_update.cc:
Check result from init_read_record()
storage/example/ha_example.cc:
Don't return error on rnd_init()
storage/ibmdb2i/ha_ibmdb2i.cc:
Removed not relevant comment
- Fixed memory leaks in mysqldump
- Fixed printf of NULL which caused crashes on OpenSolaris when using --debug
- Fixed realloc() problem that caused out of memory when running mysqldump.test on OpenSolaris
client/mysqldump.c:
Fixed memory leaks
Fixed printf of NULL which caused crashes on OpenSolaris when using --debug
client/mysqltest.cc:
Fixed printf of NULL which caused crashes on OpenSolaris when using --debug
include/my_global.h:
Added simple macro val_or_null() to simplify detecting of NULL strings for printf
sql/handler.cc:
Fixed printf of NULL which caused crashes on OpenSolaris when using --debug
sql/sql_db.cc:
Fixed printf of NULL which caused crashes on OpenSolaris when using --debug
Removed testing of 'new_db_name' as this is guranteed never NULL
sql/sql_show.cc:
Fixed printf of NULL which caused crashes on OpenSolaris when using --debug
storage/csv/ha_tina.cc:
Fixed realloc() problem that caused out of memory when running mysqldump.test on OpenSolaris
(OpenSolaris default malloc() can't handle a lot of reallocs() of strings that are growing one byte at a time)
This did speed up logging to cvs with a magnitude for large strings.
* remove handler::index_read_last()
* create handler::keyread_read_time() (was get_index_only_read_time() in opt_range.cc)
* ha_show_status() allows engine's show_status() to fail
* remove HTON_FLUSH_AFTER_RENAME
* fix key_cmp_if_same() to work for floats and doubles
* set table->status in the server, don't force engines to do it
* increment status vars in the server, don't force engines to do it
mysql-test/r/status_user.result:
correct test results - innodb was wrongly counting internal
index searches as handler_read_* calls.
sql/ha_partition.cc:
compensate for handler incrementing status counters -
we want to count only calls to underlying engines
sql/handler.h:
inline methods moved to sql_class.h
sql/key.cc:
simplify the check
sql/opt_range.cc:
move get_index_only_read_time to the handler class
sql/sp.cc:
don't use a key that's stored in the record buffer -
the engine can overwrite the buffer with anything, destroying the key
sql/sql_class.h:
inline handler methods that need to see THD and TABLE definitions
sql/sql_select.cc:
no ha_index_read_last_map anymore
sql/sql_table.cc:
remove HTON_FLUSH_AFTER_RENAME
sql/table.cc:
set HA_CAN_MEMCMP as appropriate
sql/tztime.cc:
don't use a key that's stored in the record buffer -
the engine can overwrite the buffer with anything, destroying the key
storage/myisam/ha_myisam.cc:
engines don't need to update table->status or use ha_statistic_increment anymore
storage/myisam/ha_myisam.h:
index_read_last_map is no more
Fixed some bugs introduced in 5.1.47
Disabled some tests until we have merged with latest Xtradb
configure.in:
Added testing if valgrind/memcheck.h exists
storage/pbxt/src/ha_pbxt.cc:
LOCK_plugin is not anymore locked in init
Docs/sp-imp-spec.txt:
New sql_mode added.
include/my_base.h:
Flag in frm of create options.
libmysqld/CMakeLists.txt:
New files added.
libmysqld/Makefile.am:
New files added.
mysql-test/r/events_bugs.result:
New sql_mode added.
mysql-test/r/information_schema.result:
New sql_mode added.
mysql-test/r/sp.result:
New sql_mode added.
mysql-test/r/system_mysql_db.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
New sql_mode added.
mysql-test/t/events_bugs.test:
New sql_mode added.
mysql-test/t/sp.test:
New sql_mode added.
scripts/mysql_system_tables.sql:
New sql_mode added.
scripts/mysql_system_tables_fix.sql:
New sql_mode added.
sql/CMakeLists.txt:
New files added.
sql/Makefile.am:
New files added.
sql/event_db_repository.cc:
New sql_mode added.
sql/field.cc:
Create options support added.
sql/field.h:
Create options support added.
sql/ha_partition.cc:
Create options support added.
sql/handler.cc:
Create options support added.
sql/handler.h:
Create options support added.
sql/log_event.h:
New sql_mode added.
sql/mysql_priv.h:
New sql_mode added.
sql/mysqld.cc:
New sql_mode added.
sql/share/errmsg.txt:
New error messages added.
sql/sp.cc:
New sql_mode added.
sql/sp_head.cc:
Create options support added.
sql/sql_class.cc:
Create options support added.
Debug added.
sql/sql_class.h:
Create options support added.
sql/sql_insert.cc:
my_safe_a* moved to mysqld_priv.h
sql/sql_lex.h:
Create options support added.
sql/sql_parse.cc:
Create options support added.
sql/sql_show.cc:
Create options support added.
sql/sql_table.cc:
Create options support added.
sql/sql_view.cc:
New sql_mode added.
sql/sql_yacc.yy:
Create options support added.
sql/structs.h:
Create options support added.
sql/table.cc:
Create options support added.
sql/table.h:
Create options support added.
sql/unireg.cc:
Create options support added.
storage/example/ha_example.cc:
Create options example.
storage/example/ha_example.h:
Create options example.
storage/pbxt/src/discover_xt.cc:
Create options support added.
Removed random failures from test suite
mysql-test/extra/rpl_tests/rpl_insert_id_pk.test:
Make test predicatable.
mysql-test/include/maria_empty_logs.inc:
We can't use 'Threads_connected' for syncronization, as the 'check_warnings' thread that just quit may still be counted in 'Threads_connected'
Now we just wait until MySQLD answers again, which should be good enough for our purposes
mysql-test/suite/binlog/r/binlog_index.result:
Updated results file
mysql-test/suite/binlog/t/binlog_index-master.opt:
Added option file to not get stack traces in .err file.
mysql-test/suite/binlog/t/binlog_index.test:
Added 'flush tables' to remove warning about crashed suppression file from logs
mysql-test/suite/pbxt/r/multi_statement.result:
Updated results
mysql-test/suite/pbxt/t/multi_statement-master.opt:
Added options so that slow query testing makes sense
sql/events.cc:
Don't write Event Scheduler startup message if warnings are turned off.
sql/handler.cc:
Removed compiler warning
sql/log.cc:
Removed compiler warning
sql/mysqld.cc:
Added option 'test-expect-abort'; If this is set, we don't write message to log in case of 'DBUG_ABORT'.
(Gives us smaller, easier to read log files)
sql/set_var.cc:
Removed compiler warning
sql/slave.cc:
Removed compiler warning
sql/sql_plugin.cc:
Don't write warnings about disabled plugin if using --log_warnings=0
storage/xtradb/include/ut0lst.h:
Removed compiler warning
support-files/compiler_warnings.supp:
Supress warning from xtradb
to cleanup open connections
It was possible to UNINSTALL storage engine plugin when binding
between THD object and storage engine is still active (e.g. in
the middle of transaction).
To avoid unclean deactivation (uninstall) of storage engine plugin
in the middle of transaction, additional storage engine plugin
lock is acquired by thd_set_ha_data().
If ha_data is not null and storage engine plugin was not locked
by thd_set_ha_data() in this connection before, storage engine
plugin gets locked.
If ha_data is null and storage engine plugin was locked by
thd_set_ha_data() in this connection before, storage engine
plugin lock gets released.
If handlerton::close_connection() didn't reset ha_data, server does
it immediately after calling handlerton::close_connection().
Note that this is just a framework fix, storage engines must switch
to thd_set_ha_data() from thd_ha_data() if they want to see fit.
include/mysql/plugin.h:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
include/mysql/plugin.h.pp:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/handler.cc:
Make sure ha_data is reset and ha_data lock is released.
sql/handler.h:
hton is not supposed to be updated by ha_lock_engine(),
make it const.
sql/sql_class.cc:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/sql_class.h:
Added ha_data lock.
Fixed valgrind warnings found from running main.connect under valgrind
sql/sp_head.cc:
Ensure that vcol_info is reset
sql/sql_acl.cc:
Fixed usage of wrong memroot for password
sql/sql_yacc.yy:
Ensure that vcol_info is reset
Disable pbxt for test cases not using pbxt (speeds up test suite)
extra/comp_err.c:
Added cast to get rid of compiler warning
extra/libevent/kqueue.c:
Added cast to get rid of compiler warning
mysql-test/lib/mtr_cases.pm:
Use --skip-pbxt for test cases that doesn't need pbxt
Collect default-storage-engine from suite.opt file (should actually be my.cnf file, but that wasn't easy to do)
mysql-test/suite/pbxt/t/suite.opt:
Added marker for mysql-test-run.pl that this suite require pbxt
mysys/mf_keycache.c:
Use LINT_INIT() to remove compiler warnings
mysys/my_gethostbyname.c:
Remove compiler warnings
sql/handler.cc:
Reset variable that may be used uninitialized
sql/item.h:
Remove compiler warning
sql/mysqld.cc:
Use LINT_INIT() to remove compiler warnings
sql/sql_class.h:
Remove compiler warning
sql/sql_table.cc:
Ensure variable is always set (to remove compiler warning)
sql/sql_view.cc:
Use LINT_INIT() to remove compiler warnings
storage/maria/ma_loghandler.c:
Use LINT_INIT() to remove compiler warnings
storage/myisammrg/ha_myisammrg.cc:
Fixed wrong type to printf
storage/myisammrg/myrg_open.c:
Use LINT_INIT() to remove compiler warnings
storage/xtradb/include/ut0lst.h:
Trivial change of macro to remove compiler warning
strings/ctype-ucs2.c:
Use LINT_INIT() to remove compiler warnings
strings/ctype-utf8.c:
Use LINT_INIT() to remove compiler warnings
support-files/compiler_warnings.supp:
Suppress some not relevant warnings
unittest/mysys/waiting_threads-t.c:
Don't use ftruncate() as this gives warning about ignored return value
- Avoid full inline of mark_trx_read_write() for many functions
- Avoid somewhat expensive tests for every write/update/delete row
sql/handler.h:
Adde ha_start_of_new_statement() to reset internal variables as part of the code in "open_table" that resets TABLE object for the new statement
Faster mark_trx_read_write_part()
sql/sql_base.cc:
Don't manipulate table->file internal structs directly
WL#2474 "Multi Range Read: Change the default MRR implementation to implement new MRR interface"
WL#2475 "Batched range read functions for MyISAM/InnoDb"
"Index condition pushdown for MyISAM/InnoDB"
- Adjust test results (checked)
- Code cleanup.
WL#2474 "Multi Range Read: Change the default MRR implementation to implement new MRR interface"
WL#2475 "Batched range read functions for MyISAM/InnoDb"
"Index condition pushdown for MyISAM/InnoDB"
Igor's fix from sp1r-igor@olga.mysql.com-20080330055902-07614:
There could be observed the following problems:
1. EXPLAIN did not mention pushdown conditions from on expressions in the
'extra' column. As a result if a query had no where conditions pushed
down to a table, but had on conditions pushed to this table the 'extra'
column in the EXPLAIN for the table missed 'using where'.
2. Conditions for ref access were not eliminated from on expressions
though such conditions were eliminated from the where condition.
SET TRANSACTION ISOLATION LEVEL is used to temporarily set
the trans.iso.level for the next transaction. After the
transaction, the iso.level is (re-)set to value of the
session variable 'tx_isolation'.
The bug is caused by setting the thd->variables.tx_isolation
field to the value of the session variable upon each
statement commit. It should only be set at the end of the
full transaction.
The fix has been to remove the setting of the variable in
ha_autocommit_or_rollback if we're in a transaction, as it
will be correctly set in either ha_rollback or
ha_commit_one_phase.
If, on the other hand, we're in autocommit mode, tx_isolation
will be explicitly set here.
mysql-test/t/innodb_mysql.test:
"SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED" sets
the trans.isolation for the next transaction. We test
that @@tx_isolation keeps this value during the transaction,
and is only reset back to the session value at the end
of the transaction.
- Moved some code from innodb_plugin to xtradb, to ensure that all tests runs
- Did changes in pbxt and maria storage engines becasue of changes in thd->query
- Reverted wrong code in sql_table.cc for how ROW_FORMAT is used.
This is a re-commit of Monty's merge to eliminate an extra commit from
MySQL-5.1.42 that was accidentally included in the merge.
This is a merge of the MySQL 5.1.41 clone-off (clone-5.1.41-build). In
case there are any extra changes done before final MySQL 5.1.41
release, these will need to be merged later before MariaDB 5.1.41
release.
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
The original code comes, as far as I know, from Google (Mark Callaghan's team) with additional work from Percona, Ourdelta and Weldon Whipple.
This code provides the same functionallity, but with a lot of changes to make it faster and better fit the MariaDB infrastucture.
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_sent, Rows_read
Added new variable / startup option 'userstat' to control if user statistics should be enabled or not
Added my_getcputime(); Returns cpu time used by this thread.
New FLUSH commands:
- FLUSH SLOW QUERY LOG
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
New SHOW commands:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
New Information schemas:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Added support for all new flush commands to mysqladmin
Added handler::ha_... wrappers for all handler read calls to do statistics counting
- Changed all code to use new ha_... calls
- Count number of read rows, changed rows and rows read trough an index
Added counting of number of bytes sent to binary log (status variable Binlog_bytes_written)
Added counting of access denied errors (status variable Access_denied_erors)
Bugs fixed:
- Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
- CLOCK_GETTIME was not propely working on Linuxm
client/mysqladmin.cc:
Added support for all new flush commmands and some common combinations:
flush-slow-log
flush-table-statistics
flush-index-statistics
flush-user-statistics
flush-client-statistics
flush-all-status
flush-all-statistics
configure.in:
Added checking if clock_gettime needs the librt.
(Fixes Bug #37639 clock_gettime is never used/enabled in Linux/Unix)
include/my_sys.h:
Added my_getcputime()
include/mysql_com.h:
Added LIST_PROCESS_HOST_LEN & new REFRESH target defines
mysql-test/r/information_schema.result:
New information schema tables added
mysql-test/r/information_schema_all_engines.result:
New information schema tables added
mysql-test/r/information_schema_db.result:
New information schema tables added
mysql-test/r/log_slow.result:
Added testing that flosh slow query logs is accepted
mysql-test/r/status_user.result:
Basic testing of user, client, table and index statistics
mysql-test/t/log_slow.test:
Added testing that flosh slow query logs is accepted
mysql-test/t/status_user-master.opt:
Ensure that we get a fresh restart before running status_user.test
mysql-test/t/status_user.test:
Basic testing of user, client, table and index statistics
mysys/my_getsystime.c:
Added my_getcputime()
Returns cpu time used by this thread.
sql/authors.h:
Updated authors to have core and original MySQL developers first.
sql/event_data_objects.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/event_db_repository.cc:
Changed to use new ha_... calls
sql/filesort.cc:
Changed to use new ha_... calls
sql/ha_partition.cc:
Changed to use new ha_... calls
Fixed comment syntax
sql/handler.cc:
Changed to use new ha_... calls
Reset table statistics
Added code to update global table and index status
Added counting of rows changed
sql/handler.h:
Added table and index statistics variables
Added function reset_statistics()
Added handler::ha_... wrappers for all handler read calls to do statistics counting
Protected all normal read calls to ensure we use the new calls in the server.
Made ha_partition a friend class so that partition code can call the old read functions
sql/item_subselect.cc:
Changed to use new ha_... calls
sql/lex.h:
Added keywords for new information schema tables and flush commands
sql/log.cc:
Added flush_slow_log()
Added counting of number of bytes sent to binary log
Removed not needed test of thd (It's used before, so it's safe to use)
Added THD object to MYSQL_BIN_LOG::write_cache() to simplify statistics counting
sql/log.h:
Added new parameter to write_cache()
Added flush_slow_log() functions.
sql/log_event.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/log_event_old.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/mysql_priv.h:
Updated call to mysql_reset_thd_for_next_command()
Added new statistics functions and variables needed by these.
sql/mysqld.cc:
Added new statistics variables and structures to handle these
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_set, Rows_read
Added new option 'userstat' to control if user statistics should be enabled or not
sql/opt_range.cc:
Changed to use new ha_... calls
sql/opt_range.h:
Changed to use new ha_... calls
sql/opt_sum.cc:
Changed to use new ha_... calls
sql/records.cc:
Changed to use new ha_... calls
sql/set_var.cc:
Added variable 'userstat'
sql/sp.cc:
Changed to use new ha_... calls
sql/sql_acl.cc:
Changed to use new ha_... calls
Added counting of access_denied_errors
sql/sql_base.cc:
Added call to statistics functions
sql/sql_class.cc:
Added usage of org_status_var, to store status variables at start of command
Added functions THD::update_stats(), THD::update_all_stats()
Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
sql/sql_class.h:
Added new status variables to status_var
Moved variables that was not ulong in status_var last.
Added variables to THD for storing temporary values during statistics counting
sql/sql_connect.cc:
Variables and functions to calculate user and client statistics
Added counting of access_denied_errors and lost_connections
sql/sql_cursor.cc:
Changed to use new ha_... calls
sql/sql_handler.cc:
Changed to use new ha_... calls
sql/sql_help.cc:
Changed to use new ha_... calls
sql/sql_insert.cc:
Changed to use new ha_... calls
sql/sql_lex.h:
Added SQLCOM_SHOW_USER_STATS, SQLCOM_SHOW_TABLE_STATS, SQLCOM_SHOW_INDEX_STATS, SQLCOM_SHOW_CLIENT_STATS
sql/sql_parse.cc:
Added handling of:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
Added handling of new FLUSH commands:
- FLUSH SLOW QUERY LOGS
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
Added THD parameter to mysql_reset_thd_for_next_command()
Added initialization and calls to user statistics functions
Added increment of statistics variables empty_queries, rows_sent and access_denied_errors.
Added counting of cpu time per query
sql/sql_plugin.cc:
Changed to use new ha_... calls
sql/sql_prepare.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/sql_select.cc:
Changed to use new ha_... calls
Indentation changes
sql/sql_servers.cc:
Changed to use new ha_... calls
sql/sql_show.cc:
Added counting of access denied errors
Added function for new information schema tables:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Changed to use new ha_... calls
sql/sql_table.cc:
Changed to use new ha_... calls
sql/sql_udf.cc:
Changed to use new ha_... calls
sql/sql_update.cc:
Changed to use new ha_... calls
sql/sql_yacc.yy:
Add new show and flush commands
sql/structs.h:
Add name_length to KEY to avoid some strlen
Added cache_name to KEY for fast storage of keyvalue in cache
Added structs USER_STATS, TABLE_STATS, INDEX_STATS
Added function prototypes for statistics functions
sql/table.cc:
Store db+table+index name into keyinfo->cache_name
sql/table.h:
Added new information schema tables
sql/tztime.cc:
Changed to use new ha_... calls
Create temporary InnoDB table fails on case insensitive
filesystems, when lower_case_table_names is 2 (e.g. OS X)
and temporary directory path contains upper case letters.
The problem was that tmpdir prefix was converted to lower
case when table was created, but was passed as is when
table was opened.
Fixed by leaving tmpdir prefix part intact.
mysql-test/r/lowercase_mixed_tmpdir_innodb.result:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb-master.opt:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb-master.sh:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb.test:
A test case for BUG#45638.
sql/handler.cc:
Fixed get_canonical_filename() to not lowercase filesystem
path prefix for temporary tables.
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
those keywords do nothing in 5.1 (they are meant for future versions, for example featuring the Maria engine)
so they are here removed from the syntax. Adding those keywords to future versions when needed is:
- WL#5034 "Add TRANSACTIONA=0|1 and PAGE_CHECKSUM=0|1 clauses to CREATE TABLE"
- WL#5037 "New ROW_FORMAT value for CREATE TABLE: PAGE"
mysql-test/r/create.result:
test that syntax is not accepted
mysql-test/t/create.test:
test that syntax is not accepted
sql/handler.cc:
remove ROW_FORMAT=PAGE
sql/handler.h:
Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
(see also table.h)
sql/lex.h:
removing syntax
sql/sql_show.cc:
removing output of noise keywords in SHOW CREATE TABLE and INFORMATION_SCHEMA.TABLES
sql/sql_table.cc:
removing TRANSACTIONAL
sql/sql_yacc.yy:
removing syntax
sql/table.cc:
removing TRANSACTIONAL, PAGE_CHECKSUM. Their place in the frm file is not reclaimed,
for compatibility with older 5.1.
sql/table.h:
Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
(and there are several engines which use the content TABLE_SHARE and thus rely on a certain binary
layout of this structure).
Problem was that a failing rename just left the partitions at the state
it was at the failure.
Solution was to try to revert the started rename if a failure occured.
mysql-test/r/partition_not_embedded.result:
Bug#30102: Rename table does corrupt tables with partition files on failure
New result file
mysql-test/t/partition_not_embedded.test:
Bug#30102: Rename table does corrupt tables with partition files on failure
New test file
(list_files does not report the files in embedded)
sql/ha_partition.cc:
Bug#30102: Rename table does corrupt tables with partition files on failure
Better error handling for rename partitions (reverting the started rename
operation)
Different order of files for delete.
sql/handler.cc:
Bug#30102: Rename table does corrupt tables with partition files on failure
Tries to remove as many table files as possible
if the first delete succeeds.
