fts_drop_orphaned_tables() takes long time to remove the orphaned
FTS tables. In order to reduce the time, do the following:
- Traverse fil_system.space_list and construct a set of
table_id,index_id of all FTS_*.ibd tablespaces.
- Traverse the sys_indexes table and ignore the entry
from the above collection if it exist.
- Existing elements in the collection can be considered as
orphaned fts tables. construct the table name from
(table_id,index_id) and invoke fts_drop_tables().
- Removed DICT_TF2_FTS_AUX_HEX_NAME flag usage from upgrade.
- is_aux_table() in dict_table_t to check whether the given name
is fts auxiliary table
fts_space_set_t is a structure to store set of parent table id
and index id
- Remove unused FTS function in fts0fts.cc
- Remove the fulltext index in row_format_redundant test case.
Because it deals with the condition that SYS_TABLES does have
corrupted entry and valid entry exist in SYS_INDEXES.
In tests that directly write InnoDB data file pages,
compute the innodb_checksum_algorithm=crc32 checksums,
instead of writing the 0xdeadbeef value used by
innodb_checksum_algorithm=none. In this way, these tests
will not cause failures when executing
./mtr --mysqld=--loose-innodb-checksum-algorithm=strict_crc32
1. Reverts "Tests: disabled TRT for some IB tests [#302]"
6d78496aeed1463d106ad3f023a92f399e5e0757
2. Removes setting TRANSACTION_REGISTRY=0 in mysqldump
--system-versioning-transaction-registry now is OFF by default.
This commit should be reverted back if the default will change.
Tests affected: mysqldump mysqldump-max openssl_1
As they fail on TRT schema check:
innodb.log_file
innodb.table_flags
innodb.row_format_redundant
encryption.innodb_encrypt_log_corruption
encryption.innodb_first_page
Remove the SHARED_SPACE flag that was erroneously introduced in
MariaDB 10.2.2, and shift the SYS_TABLES.TYPE flags back to where
they were before MariaDB 10.2.2. While doing this, ensure that
tables created with affected MariaDB versions can be loaded,
and also ensure that tables created with MySQL 5.7 using the
TABLESPACE attribute cannot be loaded.
MariaDB 10.2.2 picked the SHARED_SPACE flag from MySQL 5.7,
shifting the MariaDB 10.1 flags PAGE_COMPRESSION, PAGE_COMPRESSION_LEVEL,
ATOMIC_WRITES by one bit. The SHARED_SPACE flag would always
be written as 0 by MariaDB, because MariaDB does not support
CREATE TABLESPACE or CREATE TABLE...TABLESPACE for InnoDB.
So, instead of the bits AALLLLCxxxxxxx we would have
AALLLLC0xxxxxxx if the table was created with MariaDB 10.2.2
to 10.2.6. (AA=ATOMIC_WRITES, LLLL=PAGE_COMPRESSION_LEVEL,
C=PAGE_COMPRESSED, xxxxxxx=7 bits that were not moved.)
PAGE_COMPRESSED=NO implies LLLLC=00000. That is not a problem.
If someone created a table in MariaDB 10.2.2 or 10.2.3 with
the attribute ATOMIC_WRITES=OFF (value 2; AA=10) and without
PAGE_COMPRESSED=YES or PAGE_COMPRESSION_LEVEL, the table should be
rejected. We ignore this problem, because it should be unlikely
for anyone to specify ATOMIC_WRITES=OFF, and because 10.2.2 and
10.2.2 were not mature releases. The value ATOMIC_WRITES=ON (1)
would be interpreted as ATOMIC_WRITES=OFF, but starting with
MariaDB 10.2.4 the ATOMIC_WRITES attribute is ignored.
PAGE_COMPRESSED=YES implies that PAGE_COMPRESSION_LEVEL be between
1 and 9 and that ROW_FORMAT be COMPACT or DYNAMIC. Thus, the affected
wrong bit pattern in SYS_TABLES.TYPE is of the form AALLLL10DB00001
where D signals the presence of a DATA DIRECTORY attribute and B is 1
for ROW_FORMAT=DYNAMIC and 0 for ROW_FORMAT=COMPACT. We must interpret
this bit pattern as AALLLL1DB00001 (discarding the extraneous 0 bit).
dict_sys_tables_rec_read(): Adjust the affected bit pattern when
reading the SYS_TABLES.TYPE column. In case of invalid flags,
report both SYS_TABLES.TYPE (after possible adjustment) and
SYS_TABLES.MIX_LEN.
dict_load_table_one(): Replace an unreachable condition on
!dict_tf2_is_valid() with a debug assertion. The flags will already
have been validated by dict_sys_tables_rec_read(); if that validation
fails, dict_load_table_low() will have failed.
fil_ibd_create(): Shorten an error message about a file pre-existing.
Datafile::validate_to_dd(): Clarify an error message about tablespace
flags mismatch.
ha_innobase::open(): Remove an unnecessary warning message.
dict_tf_is_valid(): Simplify and stricten the logic. Validate the
values of PAGE_COMPRESSION. Remove error log output; let the callers
handle that.
DICT_TF_BITS: Remove ATOMIC_WRITES, PAGE_ENCRYPTION, PAGE_ENCRYPTION_KEY.
The ATOMIC_WRITES is ignored once the SYS_TABLES.TYPE has been validated;
there is no need to store it in dict_table_t::flags. The PAGE_ENCRYPTION
and PAGE_ENCRYPTION_KEY are unused since MariaDB 10.1.4 (the GA release
was 10.1.8).
DICT_TF_BIT_MASK: Remove (unused).
FSP_FLAGS_MEM_ATOMIC_WRITES: Remove (the flags are never read).
row_import_read_v1(): Display an error if dict_tf_is_valid() fails.
innodb.row_format_redundant: Really corrupt the SYS_TABLES.MIX_LEN,
and do not use any debug instrumentation. For tables created in the
system tablespace, the contents of the column will be ignored.
Only the table t1 will refuse to load.
dict_load_table_one(): Remove the DBUG_EXECUTE_IF instrumentation.
Omit a redundant error message "incorrect flags in SYS_TABLES".
dict_sys_tables_rec_read(): Partially revert the Oracle Bug#21644827
fix, and always report errors by the return value.
fts_create_in_mem_aux_table(): Do not rely on dict_table_t::flags2,
but instead evaluate the tablespace ID.
DICT_TF2_BITS: Reduce to the correct value of 7. The two extra
high-order bits were specific to MySQL 5.7.
srv_start_state_t: Document the flags. Replace SRV_START_STATE_STAT
with SRV_START_STATE_REDO. The srv_bg_undo_sources replaces the
original use of SRV_START_STATE_STAT.
dict_stats_thread_started, buf_dump_thread_started,
buf_flush_page_cleaner_thread_started: Remove (unused).
srv_shutdown_all_bg_threads(): Always wait for the I/O threads
to exit, also in read-only mode.
os_thread_free(): Remove.
When a slow shutdown is performed soon after spawning some work for
background threads that can create or commit transactions, it is possible
that new transactions are started or committed after the purge has finished.
This is violating the specification of innodb_fast_shutdown=0, namely that
the purge must be completed. (None of the history of the recent transactions
would be purged.)
Also, it is possible that the purge threads would exit in slow shutdown
while there exist active transactions, such as recovered incomplete
transactions that are being rolled back. Thus, the slow shutdown could
fail to purge some undo log that becomes purgeable after the transaction
commit or rollback.
srv_undo_sources: A flag that indicates if undo log can be generated
or the persistent, whether by background threads or by user SQL.
Even when this flag is clear, active transactions that already exist
in the system may be committed or rolled back.
innodb_shutdown(): Renamed from innobase_shutdown_for_mysql().
Do not return an error code; the operation never fails.
Clear the srv_undo_sources flag, and also ensure that the background
DROP TABLE queue is empty.
srv_purge_should_exit(): Do not allow the purge to exit if
srv_undo_sources are active or the background DROP TABLE queue is not
empty, or in slow shutdown, if any active transactions exist
(and are being rolled back).
srv_purge_coordinator_thread(): Remove some previous workarounds
for this bug.
innobase_start_or_create_for_mysql(): Set buf_page_cleaner_is_active
and srv_dict_stats_thread_active directly. Set srv_undo_sources before
starting the purge subsystem, to prevent immediate shutdown of the purge.
Create dict_stats_thread and fts_optimize_thread immediately
after setting srv_undo_sources, so that shutdown can use this flag to
determine if these subsystems were started.
dict_stats_shutdown(): Shut down dict_stats_thread. Backported from 10.2.
srv_shutdown_table_bg_threads(): Remove (unused).
