- Moved some code from innodb_plugin to xtradb, to ensure that all tests runs
- Did changes in pbxt and maria storage engines becasue of changes in thd->query
- Reverted wrong code in sql_table.cc for how ROW_FORMAT is used.
This is a re-commit of Monty's merge to eliminate an extra commit from
MySQL-5.1.42 that was accidentally included in the merge.
This is a merge of the MySQL 5.1.41 clone-off (clone-5.1.41-build). In
case there are any extra changes done before final MySQL 5.1.41
release, these will need to be merged later before MariaDB 5.1.41
release.
- Moved some code from innodb_plugin to xtradb, to ensure that all tests runs
- Did changes in pbxt and maria storage engines becasue of changes in thd->query
- Reverted wrong code in sql_table.cc for how ROW_FORMAT is used.
Todo before joining with main 5.1 tree:
- Join test fails (Igor to investigate)
- mysql-test-run shows warnings from tests; Some suppression rule is not working (Kristian to investiage)
- Run through all buildbots
sql/sql_table.cc:
Reverted code for ROW_FORMAT is used. We must set the HA_CREATE_USED_ROW_FORMAT flag in alter table
to signal the handler that it should not change row_type in update_create_info() (as happens for SHOW CREATE).
storage/maria/ha_maria.cc:
Update for change in defintion of thd->query
storage/myisam/mi_check.c:
Simplify code
storage/pbxt/src/discover_xt.cc:
Update for change in defintion of thd->query
storage/xtradb/dict/dict0dict.c:
Update for change in defintion of thd->query
storage/xtradb/handler/ha_innodb.cc:
Copy some critical changes from innodb_plugin to get tests to pass
storage/xtradb/handler/ha_innodb.h:
Copy some critical changes from innodb_plugin to get tests to pass
storage/xtradb/handler/handler0alter.cc:
Copy some critical changes from innodb_plugin to get tests to pass
The additional patch. That 'loadxml.test' failure was actually about our testing system,
not the code.
Firstly we need a new mysqltest command, wich i called 'send_eval'. So the expression
can be evaluated, then started in a parallel thread. We only have separane 'send' and
'eval' commands at the moment.
Then we need to add the waiting code after the 'KILL' to our test, so the thread will be killed
before the test goes further. The present 'reap' command doesn't handle the killed threads
well.
per-file comments:
client/mysqltest.cc
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
The 'send_eval' command implemented.
mysql-test/r/loadxml.result
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test result updated.
mysql-test/t/loadxml.test
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test case added.
The additional patch. That 'loadxml.test' failure was actually about our testing system,
not the code.
Firstly we need a new mysqltest command, wich i called 'send_eval'. So the expression
can be evaluated, then started in a parallel thread. We only have separane 'send' and
'eval' commands at the moment.
Then we need to add the waiting code after the 'KILL' to our test, so the thread will be killed
before the test goes further. The present 'reap' command doesn't handle the killed threads
well.
per-file comments:
client/mysqltest.cc
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
The 'send_eval' command implemented.
mysql-test/r/loadxml.result
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test result updated.
mysql-test/t/loadxml.test
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test case added.
------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
Bug#41860: Without Windows named pipe
The problem was that the patch for Bug#10374 broke named pipe
and shared memory transports on Windows due to a failure to
implement a dummy poll method for transports other than BSD
sockets. Another problem was that mysqltest lacked support
for named pipe and shared memory connections, which lead to
misleading test cases that were supposed run common queries
over both transports.
The solution is to properly implement, at the VIO layer, the
poll and is_connected methods. The is_connected method is
implemented for every suppported transport and the poll one
only where it makes sense. Furthermore, support for named pipe
and shared memory connections is added to mysqltest as to
enable testing of both transports using the test suite.
client/mysqltest.cc:
Add support for named pipe and shared memory connections.
include/violite.h:
Move private functions to vio/vio_priv.h
Add poll_read and is_connected methods.
mysql-test/t/named_pipe.test:
Run tests over a named pipe connection.
mysql-test/t/shm.test:
Run tests over a shared memory connection.
sql/item_func.cc:
Rename method.
sql/sql_class.cc:
Remove higher-level vio_is_connected implementation.
sql/sql_class.h:
Rename vio_is_connected to not conflict with the vio one.
Verify that there is a valid vio.
vio/vio.c:
Add poll_read and is_connected methods.
vio/vio_priv.h:
Add private functions.
vio/viosocket.c:
Implement the is_connected method for the various transports.
------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
Bug#41860: Without Windows named pipe
The problem was that the patch for Bug#10374 broke named pipe
and shared memory transports on Windows due to a failure to
implement a dummy poll method for transports other than BSD
sockets. Another problem was that mysqltest lacked support
for named pipe and shared memory connections, which lead to
misleading test cases that were supposed run common queries
over both transports.
The solution is to properly implement, at the VIO layer, the
poll and is_connected methods. The is_connected method is
implemented for every suppported transport and the poll one
only where it makes sense. Furthermore, support for named pipe
and shared memory connections is added to mysqltest as to
enable testing of both transports using the test suite.
The reason for the bug is that mysqtest as well as other client tools
running in test suite (mysqlbinlog, mysqldump) will first try to connect
whatever database has created shared memory with default base name
"MySQL" and use this. (Same effect could be seen on Unix if mtr would
not care to calculate "port" and "socket" parameter).
The fix ensures that all client tools and running in mtr use unique
per-database shared memory base parameters, so there is no possibility
to clash with already installed one. We use socket name for shared memory
base (it's known to be unique). This shared-memory-base is written to the
MTR config file to the [client] and [mysqld] sections. Fix made also made
sure all client tools understand and correctly handle --shared-memory-base.
Prior to this patch it was not the case for mysqltest, mysqlbinlog and
mysql_client_test.
All new connections done from mtr scripts via connect() will by default
set shared-memory-base. And finally, there is a possibility to force
shared memory or pipe connection and overwrite shared memory/pipe base name
from within mtr scripts via optional PIPE or SHM modifier. This functionality
was manually backported from 6.0
(original patch http://lists.mysql.com/commits/74749)
The reason for the bug is that mysqtest as well as other client tools
running in test suite (mysqlbinlog, mysqldump) will first try to connect
whatever database has created shared memory with default base name
"MySQL" and use this. (Same effect could be seen on Unix if mtr would
not care to calculate "port" and "socket" parameter).
The fix ensures that all client tools and running in mtr use unique
per-database shared memory base parameters, so there is no possibility
to clash with already installed one. We use socket name for shared memory
base (it's known to be unique). This shared-memory-base is written to the
MTR config file to the [client] and [mysqld] sections. Fix made also made
sure all client tools understand and correctly handle --shared-memory-base.
Prior to this patch it was not the case for mysqltest, mysqlbinlog and
mysql_client_test.
All new connections done from mtr scripts via connect() will by default
set shared-memory-base. And finally, there is a possibility to force
shared memory or pipe connection and overwrite shared memory/pipe base name
from within mtr scripts via optional PIPE or SHM modifier. This functionality
was manually backported from 6.0
(original patch http://lists.mysql.com/commits/74749)
Original revision:
revno: 2617.55.2
committer: Alexander Nozdrin <alik@sun.com>
branch nick: azalea-bf-bug38992
timestamp: Fri 2009-06-19 16:41:16 +0400
message:
Fix for Bug#38992: Server crashes sporadically with
'waiting for initial ...' msg on windows.
The problem is that connection timeout is too small
for busy windows box.
The fix is to
- add support for connect_timeout command line argument
to mysqltest;
- set default value of the connect_timeout option to
120 seconds.
Original revision:
revno: 2617.55.2
committer: Alexander Nozdrin <alik@sun.com>
branch nick: azalea-bf-bug38992
timestamp: Fri 2009-06-19 16:41:16 +0400
message:
Fix for Bug#38992: Server crashes sporadically with
'waiting for initial ...' msg on windows.
The problem is that connection timeout is too small
for busy windows box.
The fix is to
- add support for connect_timeout command line argument
to mysqltest;
- set default value of the connect_timeout option to
120 seconds.
