Fix parsing of mysql client commands, especially in relation to
single-line comments when --comments was specified.
This is a little tricky, because we need to allow single-line
comments in the middle of statements, but we don't want to allow
client commands in the middle of statements. So in
comment-preservation mode, we go ahead and send single-line
comments to the server immediately when we encounter them on their
own.
This is still slightly flawed, in that it does not handle a
single-line comment with leading spaces, followed by a client-side
command when --comment has been enabled. But this isn't a new
problem, and it is quite an edge condition. Fixing it would require
a more extensive overall of how the mysql client parses commands.
Fix parsing of mysql client commands, especially in relation to
single-line comments when --comments was specified.
This is a little tricky, because we need to allow single-line
comments in the middle of statements, but we don't want to allow
client commands in the middle of statements. So in
comment-preservation mode, we go ahead and send single-line
comments to the server immediately when we encounter them on their
own.
This is still slightly flawed, in that it does not handle a
single-line comment with leading spaces, followed by a client-side
command when --comment has been enabled. But this isn't a new
problem, and it is quite an edge condition. Fixing it would require
a more extensive overall of how the mysql client parses commands.
The problem here is that embedded server starts handle_thread manager
thread on mysql_library_init() does not stop it on mysql_library_end().
At shutdown, my_thread_global_end() waits for thread count to become 0,
but since we did not stop the thread it will give up after 5 seconds.
Solution is to move shutdown for handle_manager thread from kill_server()
(mysqld specific) to clean_up() that is used by both embedded and mysqld.
This patch also contains some refactorings - to avoid duplicate code,
start_handle_manager() and stop_handle_manager() functions are introduced.
Unused variables are eliminated. handle_manager does not rely on global
variable abort_loop anymore to stop (abort_loop is not set for embedded).
Note: Specifically on Windows and when using DBUG version of libmysqld,
the complete solution requires removing obsolete code my_thread_init()
from my_thread_var(). This has a side effect that a DBUG statement
after my_thread_end() can cause thread counter to be incremented, and
embedded will hang for some seconds. Or worse, my_thread_init() will
crash if critical sections have been deleted by the global cleanup
routine that runs in a different thread.
This patch also fixes and revert prior changes for Bug#38293
"Libmysqld crash in mysql_library_init if language file missing".
Root cause of the crash observed in Bug#38293 was bug in my_thread_init()
described above
client/mysql.cc:
sql_protocol_typelib is not exported from libmysqld
(does not make sense either)
thus excluded from embedded client
dbug/dbug.c:
revert changes for Bug#38293
include/my_dbug.h:
revert changes for Bug#38293
libmysql/libmysql.c:
Removed DBUG_POP call, because when called after my_end(), will access
THR_key_mysys that is already deleted. The result of pthread_get_specific
is not predictable in this case and hence DBUG_POP can crash.
libmysqld/examples/CMakeLists.txt:
Revert changes for Bug#38293.
libmysqld/lib_sql.cc:
code to start handle manager is factored out into
start_handle_manager() function
libmysqld/libmysqld.def:
Revert changes for Bug #38293
Remove excessive exports from libmysqld, export what API documents.
mysys/my_thr_init.c:
Remove windows-DLL-specific workaround for something (old code, no documentation for
what specifically). The problem is that even after my_thread_end() is finished,
DBUG statement can initiate my_thread_init(). This does not happen anywhere else and
should not happen on Windows either.
sql/mysql_priv.h:
- new functions start_handle_manager() and stop_handle_manager()
- move manager_thread_in_use variable to sql_manager.cc and made
it static
- remove manager_status, as it is unused
sql/mysqld.cc:
Code to start/stop handle_manager thread is factored out into start_handle_manager()
The problem here is that embedded server starts handle_thread manager
thread on mysql_library_init() does not stop it on mysql_library_end().
At shutdown, my_thread_global_end() waits for thread count to become 0,
but since we did not stop the thread it will give up after 5 seconds.
Solution is to move shutdown for handle_manager thread from kill_server()
(mysqld specific) to clean_up() that is used by both embedded and mysqld.
This patch also contains some refactorings - to avoid duplicate code,
start_handle_manager() and stop_handle_manager() functions are introduced.
Unused variables are eliminated. handle_manager does not rely on global
variable abort_loop anymore to stop (abort_loop is not set for embedded).
Note: Specifically on Windows and when using DBUG version of libmysqld,
the complete solution requires removing obsolete code my_thread_init()
from my_thread_var(). This has a side effect that a DBUG statement
after my_thread_end() can cause thread counter to be incremented, and
embedded will hang for some seconds. Or worse, my_thread_init() will
crash if critical sections have been deleted by the global cleanup
routine that runs in a different thread.
This patch also fixes and revert prior changes for Bug#38293
"Libmysqld crash in mysql_library_init if language file missing".
Root cause of the crash observed in Bug#38293 was bug in my_thread_init()
described above
- Revert the fix for bug 33812
- fixed a win32 warning
client/mysql.cc:
revert the fix for bug 33812
mysql-test/r/mysql.result:
revert the fix for bug 33812
mysql-test/t/mysql_delimiter.sql:
revert the fix for bug 33812
mysys/default.c:
fixed a win32 warning
- Fixes key corruption where pages wasn't marked that they contained transid.
- Fixed bug in block record that could create too small rows when transid was removed. This fixed some asserts() when testing block length
Added --abort-source-on-error to the mysql client. (Very helpfull when debugging wrong .sql files)
client/client_priv.h:
Added enum for new option to mysql
client/mysql.cc:
Added new option --abort-source-on-error to allow one to get 'source' to stop on error. This is 0 by default, to keep old behaviour.
Print file name and line number when getting an error when doing source filename
sql/field.cc:
Removed old dead code
sql/sql_class.cc:
Removed old dead code
storage/maria/ma_blockrec.c:
Added checking of min block length to check_directory()
When creating new directory entry, set length to 0; This ensures that the assert checks() on block lengths works properly.
Added more DBUG_ASSERT() and more calls to check_directory()
In get_head_or_tail_page(), send in correct min_block_length. This is now safe as the length of new blocks are now 0
storage/maria/ma_delete.c:
When moving key to parent page, mark page if key has transid
storage/maria/ma_write.c:
Fixed bug where _ma_find_last_pos() didn't set int_key->flag.
Simpilifed code by unrolling loop.
Bug#33812: mysql client incorrectly parsing DELIMITER
Remove unnecessary and incorrect code that tried
to pull delimiter commands out of the middle of
statements.
Bug#33812: mysql client incorrectly parsing DELIMITER
Remove unnecessary and incorrect code that tried
to pull delimiter commands out of the middle of
statements.
as a commentary
mysql client has been modified to interpret EOL after
standalone -- commentary strings like whitespace
character (according to
http://dev.mysql.com/doc/refman/5.0/en/ansi-diff-comments.html)
mysql-test/t/mysql_delimiter.sql:
Added test case for bug #36244.
into amd64.(none):/src/bug26243/my51-bug26243
dbug/factorial.c:
Auto merged
dbug/user.r:
Auto merged
include/my_dbug.h:
Auto merged
libmysql/libmysql.c:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/net_serv.cc:
Auto merged
sql/sql_cache.cc:
Auto merged
sql/sql_select.cc:
Auto merged
storage/innobase/handler/ha_innodb.cc:
Auto merged
storage/myisam/mi_open.c:
Auto merged
tests/mysql_client_test.c:
Auto merged
dbug/dbug.c:
Null Merge
sql/mysqld.cc:
Null Merge
sql/opt_range.cc:
Null Merge
sql/set_var.cc:
Null Merge
sql/slave.cc:
Null Merge
storage/federated/ha_federated.cc:
Null Merge
storage/myisammrg/ha_myisammrg.cc:
Null Merge
client/mysql.cc:
Manual Merge
- Backported the 5.1 DBUG to 5.0.
- Avoid memory cleanup race on Windows client for CTRL-C
client/mysql.cc:
Bug#26243 mysql command line crash after control-c
- On Windows, the sigint handler shouldn't call mysql_end
because the main thread will do so automatically.
- Remove unnecessary signal call from the sigint handler.
- Call my_end with proper value.
dbug/dbug.c:
Bug#26243 mysql command line crash after control-c
- Backported the 5.1 DBUG library. The old version uses a non-thread
safe global variable 'static struct state *stack'.
dbug/factorial.c:
Bug#26243 mysql command line crash after control-c
- Backported the 5.1 DBUG library. The old version uses a non-thread
safe global variable 'static struct state *stack'.
dbug/user.r:
Bug#26243 mysql command line crash after control-c
- Backported the 5.1 DBUG library. The old version uses a non-thread
safe global variable 'static struct state *stack'.
include/my_dbug.h:
Bug#26243 mysql command line crash after control-c
- Backported the 5.1 DBUG library. The old version uses a non-thread
safe global variable 'static struct state *stack'.
libmysql/libmysql.c:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
myisam/mi_open.c:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/ha_federated.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/ha_innodb.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/ha_myisammrg.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/item_cmpfunc.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/mysqld.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/net_serv.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/opt_range.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/set_var.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/slave.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/sql_cache.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
sql/sql_select.cc:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
tests/mysql_client_test.c:
Bug#26243 mysql command line crash after control-c
- Update for new DBUG library.
into kaamos.(none):/data/src/opt/mysql-5.1-opt
client/mysql.cc:
Auto merged
client/mysqldump.c:
Auto merged
configure.in:
Auto merged
include/my_global.h:
Auto merged
libmysql/libmysql.c:
Auto merged
libmysqld/lib_sql.cc:
Auto merged
mysql-test/include/mix1.inc:
Auto merged
mysql-test/r/create.result:
Auto merged
mysql-test/r/func_str.result:
Auto merged
mysql-test/r/innodb.result:
Auto merged
mysql-test/r/innodb_mysql.result:
Auto merged
mysql-test/r/select.result:
Auto merged
mysql-test/r/subselect.result:
Auto merged
mysql-test/t/create.test:
Auto merged
mysql-test/t/disabled.def:
Auto merged
sql/filesort.cc:
Auto merged
sql/handler.cc:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/item_func.cc:
Auto merged
sql/item_func.h:
Auto merged
sql/item_sum.cc:
Auto merged
sql/log.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/sp.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_plugin.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
storage/ndb/src/kernel/blocks/backup/Backup.hpp:
Auto merged
tests/mysql_client_test.c:
Auto merged
mysql-test/r/func_time.result:
Manual merge.
mysql-test/r/view.result:
Manual merge.
mysql-test/t/view.test:
Manual merge.
scripts/mysql_config.sh:
Manual merge.
sql-common/client.c:
Manual merge.
sql/sql_parse.cc:
Manual merge.
into kaamos.(none):/data/src/opt/mysql-5.0-opt
client/mysql.cc:
Auto merged
sql/filesort.cc:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_func.cc:
Auto merged
sql/mysqld.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
tests/mysql_client_test.c:
Auto merged
mysql-test/r/view.result:
Manual merge.
mysql-test/t/view.test:
Manual merge.
scripts/mysql_config.sh:
Manual merge.
into mysql.com:/home/hf/work/25097/my51-25097
client/mysql.cc:
Auto merged
include/sql_common.h:
Auto merged
libmysql/libmysql.c:
Auto merged
libmysqld/lib_sql.cc:
Auto merged
sql-common/client.c:
merging
sql/log.cc:
merging
There was no way to return an error from the client library
if no MYSQL connections was established.
So here i added variables to store that king of errors and
made functions like mysql_error(NULL) to return these.
client/mysql.cc:
Bug #25097 mysql_server_init fails silently if no errmsg.sys is present.
Show the error message on std_error
include/sql_common.h:
Bug #25097 mysql_server_init fails silently if no errmsg.sys is present.
cant_connect_sqlstate constant declared
libmysql/libmysql.c:
Bug #25097 mysql_server_init fails silently if no errmsg.sys is present.
mysql_sqlstate(NULL) returns 'unknown_sqlstate'
libmysqld/lib_sql.cc:
Bug #25097 mysql_server_init fails silently if no errmsg.sys is present.
EMBEDDED_SERVER version of the vprint_msg_to_log() implemented
sql-common/client.c:
Bug #25097 mysql_server_init fails silently if no errmsg.sys is present.
mysql_server_last_errno and mysql_server_last_error introduced
to store errors not related to particular connections.
mysql_error(NULL) and mysql_errno(NULL) now returns these
mysql_server_last_error and errno respectively
sql/log.cc:
Bug #25097 mysql_server_init fails silently if no errmsg.sys is present.
EMBEDDED_LIBRARY implementation of the vprint_msg_to_log() moved
to lib_sql.cc
There was no way to return an error from the client library
if no MYSQL connections was established.
So here i added variables to store that king of errors and
made functions like mysql_error(NULL) to return these.
Nothing was in the command-line dictionary, because of the wrong
order of instructions when populating it.
This is a smaller, less optimistic patch that both fixes a bug and
refreshes the list of keywords that the command-line library (e.g.,
readline) can use to expand typed commands. Now, read from the
command list /after/ we free the list, not before.
The best way is to read the keywords from the lexer code, but that
doesn't work everywhere yet. Grr.
client/mysql.cc:
Order the instructions for clearing and populating the keyword list,
to be in that order.
Additionally, add more keywords.
Nothing was in the command-line dictionary, because of the wrong
order of instructions when populating it.
This is a smaller, less optimistic patch that both fixes a bug and
refreshes the list of keywords that the command-line library (e.g.,
readline) can use to expand typed commands. Now, read from the
command list /after/ we free the list, not before.
The best way is to read the keywords from the lexer code, but that
doesn't work everywhere yet. Grr.
running queries
Bug#33976: buffer overflow of variable time_buff in function com_go()
An internal buffer was too short. Overextending could smash the
stack on some architectures and cause SEGVs. This is not a problem
that could be exploited to run arbitrary code.
To fix, I expanded one buffer to cover all the size that could be
written to (we know the abolute max).
client/mysql.cc:
Bump up the max size of the time-elapsed buffer displayed at the end
of queries.
running queries
Bug#33976: buffer overflow of variable time_buff in function com_go()
An internal buffer was too short. Overextending could smash the
stack on some architectures and cause SEGVs. This is not a problem
that could be exploited to run arbitrary code.
To fix, I expanded one buffer to cover all the size that could be
written to (we know the abolute max).
into kaamos.(none):/data/src/opt/mysql-5.1-opt
client/mysql.cc:
Auto merged
client/mysqltest.c:
Auto merged
sql/log.cc:
Auto merged
sql/repl_failsafe.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_class.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_db.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_show.cc:
Auto merged
