This fixes MDEV-7742 and MDEV-8305 (Allow user to specify if stored
procedures should be logged in the slow and general log)
New functionality:
- Added new variables log_slow_disable_statements and log_disable_statements
that can be used to disable logging of certain queries to slow and
general log. Currently supported options are 'admin', 'call', 'slave'
and 'sp'.
Defaults are as before. Only 'sp' (stored procedure statements) is
disabled for slow and general_log.
- Slow log to files now includes the following new information:
- When logging stored procedure statements the name of stored
procedure is logged.
- Number of created tmp_tables, tmp_disk_tables and the space used
by temporary tables.
- When logging 'call', the logged status now contains the sum of all
included statements. Before only 'time' was correct.
- Added filsort_priority_queue as an option for log_slow_filter (this
variable existed before, but was not exposed)
- Added support for BIT types in my_getopt()
Mapped some old variables to bitmaps (old variables can still be used)
- Variable 'log_queries_not_using_indexes' is mapped to
log_slow_filter='not_using_index'
- Variable 'log_slow_slave_statements' is mapped to
log_slow_disabled_statements='slave'
- Variable 'log_slow_admin_statements' is mapped to
log_slow_disabled_statements='admin'
- All the above variables are changed to session variables from global
variables
Other things:
- Simplified LOGGER::log_command. We don't need to check for super if
OPTION_LOG_OFF is set as this flag can only be set if one is a super
user.
- Removed some setting of enable_slow_log as it's guaranteed to be set by
mysql_parse()
- mysql_admin_table() now sets thd->enable_slow_log
- Added prepare_logs_for_admin_command() to reset thd->enable_slow_log if
needed.
- Added new functions to store, restore and add slow query status
- Added new functions to store and restore query start time
- Reorganized Sub_statement_state according to types
- Added code in dispatch_command() to ensure that
thd->reset_for_next_command() is always called for a query.
- Added thd->last_sql_command to simplify checking of what was the type
of the last command. Needed when logging to slow log as lex->sql_command
may have changed before slow logging is called.
- Moved QPLAN_TMP_... to where status for tmp tables are updated
- Added new THD variable, affected_rows, to be able to correctly log
number of affected rows to slow log.
If compiling a non DBUG binary with
-DDBUG_ASSERT_AS_PRINTF asserts will be
changed to printf + stack trace (of stack
trace are enabled).
- Changed #ifndef DBUG_OFF to
#ifdef DBUG_ASSERT_EXISTS
for those DBUG_OFF that was just used to enable
assert
- Assert checking that could greatly impact
performance where changed to DBUG_ASSERT_SLOW which
is not affected by DBUG_ASSERT_AS_PRINTF
- Added one extra option to my_print_stacktrace() to
get more silent in case of stack trace printing as
part of assert.
- Added TABLE_SHARE->not_usable_by_query_cache
- Moved TABLE->no_replicate to TABLE_SHARE->no_replicate as it's same for
all TABLE instances
- Renamed TABLE_SHARE->cached_row_logging_check to can_do_row_logging
- Added sql/mariadb.h file that should be included first by files in sql
directory, if sql_plugin.h is not used (sql_plugin.h adds SHOW variables
that must be done before my_global.h is included)
- Removed a lot of include my_global.h from include files
- Removed include's of some files that my_global.h automatically includes
- Removed duplicated include's of my_sys.h
- Replaced include my_config.h with my_global.h
Merged from mysql-wsrep-bugs following:
GCF-1058 MTR test galera.MW-86 fails on repeated runs
Wait for the sync point sync.wsrep_apply_cb to be reached before
executing the test and clearing the debug flag sync.wsrep_apply_cb.
The race scenario:
Intended behavior:
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
node2 (background): consume the signal
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - ok
What happens occasionally (unexpected):
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
// The background INSERT still has _not_ reached the place where it starts
// waiting for the signal:
// DBUG_EXECUTE_IF("sync.wsrep_apply_cb", "now wait_for...");
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
// The background INSERT reaches DBUG_EXECUTE_IF("sync.wsrep_apply_cb", ...)
// but sync.wsrep_apply_cb has already been cleared and the "wait" code is not
// executed. The signal remains unconsumed.
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - failure, signal.wsrep_apply_cb is
pending (not consumed)
Remove MW-360 test case as it is not intended for MariaDB (uses
MySQL GTID).
The problem was that the introduction of max-thread-mem-used can cause
an allocation error very early, even before mysql_parse() is called.
As mysql_parse() calls thd->reset_for_next_command(), which called
clear_error(), the error number was lost.
Fixed by adding an option to have unique messages for each KILL
signal and change max-thread-mem-used to use this new feature.
This removes a lot of problems with the original approach, where
one could get errors signaled silenty almost any time.
ixed by moving clear_error() from reset_for_next_command() to
do_command(), before any memory allocation for the thread.
Related changes:
- reset_for_next_command() now have an optional parameter if we should
call clear_error() or not. By default it's called, but not anymore from
dispatch_command() which was the original problem.
- Added optional paramater to clear_error() to force calling of
reset_diagnostics_area(). Before clear_error() only called
reset_diagnostics_area() if there was no error, so we normally
called reset_diagnostics_area() twice.
- This change removed several duplicated calls to clear_error()
when starting a query.
- Reset max_mem_used on COM_QUIT, to protect against kill during
quit.
- Use fatal_error() instead of setting is_fatal_error (cleanup)
- Set fatal_error if max_thead_mem_used is signaled.
(Same logic we use for other places where we are out of resources)
Change the semantics of thd_get_error_context_description().
It no longer expects the caller to lock LOCK_thread_count
(no caller ever did that anyway), but takes care of it internally.
don't use thd->query_id check in background purge threads
(it doesn't work, because thd->query_id is never incremented there)
instead use thd->open_tables directly, there can be only one table
there anyway, and this is the table opened by this purge thread.
This could happen when the client connection dies while sending a progress
report packet.
Fixed by not raising any errors when sending progress packets.
and
MDEV-13011 Server crashes in THD::handle_condition or Assertion `! is_set() || m_can_overwrite_status' fails upon attempt to connect with max_session_mem_used = 8192
errors when a connection is killed in the
* TABLE_SHARE::init_from_sql_statement_string()
* THD::init()
also, safety-wise, don't check max_mem_used on free() and when some error
was already issued.
The XtraDB storage engine was already replaced by InnoDB
and disabled in MariaDB Server 10.2. Let us remove it altogether
to avoid dragging dead code around.
Replace some references to XtraDB with references to InnoDB.
rpl_get_position_info(): Remove.
Remove the mysql-test-run --suite=percona, because it only contains
tests specific to XtraDB, many of which were disabled already in
earlier MariaDB versions.
The sole purpose of handlerton::release_temporary_latches and its wrapper
function was to release the InnoDB adaptive hash index latch
(btr_search_latch).
When the btr_search_latch was split into an array of latches
in MySQL 5.7.8 as part of the Oracle Bug#20985298 fix, the "caching"
of the latch across storage engine API calls was removed. As part of that,
the function trx_search_latch_release_if_reserved() was changed to an
assertion and the function trx_reserve_search_latch_if_not_reserved()
was removed, and handlerton::release_temporary_latches() practically
became a no-op.
Note: MDEV-12121 replaced the function
trx_search_latch_release_if_reserved()
with the more appropriately named macro trx_assert_no_search_latch().
- Old sequence code forced row based replication for any statements that
refered to a sequence table. What is new is that row based replication
is now sequence aware:
- NEXT VALUE is now generating a short row based event with only
next_value and round being replicated.
- Short row based events are now on the slave updated as trough
SET_VALUE(sequence_name)
- Full row based events are on the slave updated with a full insert,
which is practically same as ALTER SEQUENCE.
- INSERT on a SEQUENCE table does now a EXCLUSIVE LOCK to ensure that
it is logged in binary log before any following NEXT VALUE calls.
- Enable all sequence tests and fixed found bugs
- ALTER SEQUENCE doesn't anymore allow changes that makes the next_value
outside of allowed range
- SEQUENCE changes are done with TL_WRITE_ALLOW_WRITE. Because of this
one can generate a statement for MyISAM with both
TL_WRITE_CONCURRENT_INSERT and TL_WRITE_ALLOW_WRITE. To fix a warning
I had to add an extra test in thr_lock.c for this.
- Removed UPDATE of SEQUENCE (no need to support this as we
have ALTER SEQUENCE, which takes the EXCLUSIVE lock properly.
- Removed DBUG_ASSERT() in MDL_context::upgrade_shared_lock. This was
removed upstream in MySQL 5.6 in 72f823de453.
- Simplified test in decided_logging_format() by using sql_command_flags()
- Fix that we log DROP SEQUENCE correctly.
- Fixed that Aria works with SEQUENCE
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
