According to logs analysis the Dump thread attempted to read again data which
was already sent. The reason of regressed read turns out in an _my_b_cache_read()
early exit branch which missed to distinguish between total zero size read (e.g
ineffective read when Count argument is zero) from a case when the
requested amount of data is fully read out by sole accessing the cache's
file. In the latter case such then *effective* reading was not
reflected in the cache's state to screw the cache's state.
Fixed with a check introduced of whether the file reading was effective prior to
early exit. When this is the case conduct standard cache state change to
account the actual read size.
Notice the bug can show up also as an error to read binlog event e.g
through BINLOG_GTID_POS() (of MDEV-16886).
extra/mariabackup/fil_cur.cc:361:42: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
extra/mariabackup/fil_cur.cc:376:9: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
sql/handler.cc:6196:45: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
sql/log.cc:1681:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/log.cc:1687:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/wsrep_sst.cc:1388:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
sql/wsrep_sst.cc:232:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
storage/connect/filamdbf.cpp:450:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/filamdbf.cpp:970:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/inihandl.cpp:197:16: warning: address of array 'key->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
storage/innobase/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/buf/buf0buf.cc:5085:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/innobase/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/handler/ha_innodb.cc:18685:7: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
storage/innobase/row/row0mysql.cc:3319:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/row/row0mysql.cc:3327:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/maria/ma_norec.c:35:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_norec.c:42:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_test2.c:1009:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/maria/ma_test2.c:1010:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/mroonga/ha_mroonga.cpp:9189:44: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
storage/mroonga/vendor/groonga/lib/expr.c:4987:22: warning: comparison of constant -1 with expression of type 'grn_operator' is always false [-Wtautological-constant-out-of-range-compare]
storage/xtradb/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/buf/buf0buf.cc:5047:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/xtradb/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3324:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3332:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:120:35: warning: format specifies type 'unsigned long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:96:35: note: expanded from macro 'INFO_TAIL'
MDEV-7257 made a dump thread to read from binlog concurrently with
writers as long as the read bytes are below a water-mark
(MYSQL_BIN_LOG::binlog_end_pos). However it appeared to be possible a
dump thread reader reach out for bytes past the water mark through a
feature of IO_CACHE that fills in the internal buffer and while doing
so it could read what the reader is not supposed to see (the bytes
above MYSQL_BIN_LOG::binlog_end_pos).
The issue is fixed with constraining the IO_CACHE buffer fill to respect
the watermark.
An added unit test proves reading from file is bound to an external
parameter
passed to {IO_CACHE::end_of_file} cache member.
MDEV-7257 made a dump thread to read from binlog concurrently with
writers as long as the read bytes are below a water-mark
(MYSQL_BIN_LOG::binlog_end_pos). However it appeared to be possible a
dump thread reader reach out for bytes past the water mark through a
feature of IO_CACHE that fills in the internal buffer and while doing
so it could read what the reader is not supposed to see (the bytes
above MYSQL_BIN_LOG::binlog_end_pos).
The issue is fixed with constraining the IO_CACHE buffer fill to respect
the watermark.
An added unit test proves reading from file is bound to an external
parameter
passed to {IO_CACHE::end_of_file} cache member.
This reverts commit d39629f01ebdd5b89186e6c8a4a8d3dd528bd26a.
Because running mtr for many hours with no output whatsoever
is not really what we should do.
And in 5.5 `make test` just works anyway, nothing to fix here.
Assign all tests added via MY_ADD_TEST to a bogus default_ignore target,
so that they are not ran by default when doing bare make test. Add default
test named MTR that calls mysql-test-run suite, which is now the single
test run by make test.
In consequence, modified unit/suite.pm to exclude the MTR test and run the
real ctests flagged for default_ignore target, thus no circular
loop.
Fix type mismatches in the unit test mdev10259().
btr_search_info_get_ref_count(): Do not return early if !table->space.
We can simply access table->space_id even after the tablespace has
been discarded.
btr_get_search_latch(): Relax a debug assertion to allow
!index->table->space.
order with Galera and encrypt-tmp-files=1
Problem:- If trans_cache (IO_CACHE) uses encrypted tmp file
then on next DML server will crash.
Case:-
Lets take a case , we have a table t1 , We try to do 2 inserts in t1
1. A really long insert so that trans_cache has to use temp_file
2. Just a small insert
Analysis:- Actually server crashes from inside of galera
library.
/lib64/libc.so.6(abort+0x175)[0x7fb5ba779dc5]
/usr/lib64/galera/libgalera_smm.so(_ZN6galera3FSMINS_9TrxHandle5State...
mysys/stacktrace.c:247(my_print_stacktrace)[0x7fb5a714940e]
sql/signal_handler.cc:160(handle_fatal_signal)[0x7fb5a715c1bd]
sql/wsrep_hton.cc:257(wsrep_rollback)[0x7fb5bcce923a]
sql/wsrep_hton.cc:268(wsrep_rollback)[0x7fb5bcce9368]
sql/handler.cc:1658(ha_rollback_trans(THD*, bool))[0x7fb5bcd4f41a]
sql/handler.cc:1483(ha_commit_trans(THD*, bool))[0x7fb5bcd4f804]
but actual issue is not in galera but in mariadb, because for 2nd
insert we should never call rollback. We are calling rollback because
log_and_order fails it fails because write_cache fails , It fails
because after reinit_io_cache(trans_cache) , my_b_bytes_in_cache says 0
so we look into tmp_file for data , which is obviously wrong since temp
was used for previous insert and it no longer exist.
wsrep_write_cache_inc() reads the IO_CACHE in a loop, filling it with
my_b_fill() until it returns "0 bytes read". Later
MYSQL_BIN_LOG::write_cache() does the same. wsrep_write_cache_inc()
assumes that reading a zero bytes past EOF leaves the old data in the
cache
Solution:- There is two issue in my_b_encr_read
1st we should never equal read_end to info->buffer. I mean this
does not make sense read_end should always point to end of buffer.
2nd For most of the case(apart from async IO_CACHE) info->pos_in_file
should be equal to info->buffer position wrt to temp file , since
in this case we are not changing info->buffer it should remain
unchanged.
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
- Added sql/mariadb.h file that should be included first by files in sql
directory, if sql_plugin.h is not used (sql_plugin.h adds SHOW variables
that must be done before my_global.h is included)
- Removed a lot of include my_global.h from include files
- Removed include's of some files that my_global.h automatically includes
- Removed duplicated include's of my_sys.h
- Replaced include my_config.h with my_global.h
These self references were previously used to avoid having to check the
IO_CACHE's type. However, a benchmark shows that on x86 5930k stock,
the type comparison is marginally faster than the double pointer dereference.
For 40 billion my_b_tell calls, the difference is .1 seconds in favor of performing the
type check. (Basically there is no measurable difference)
To prevent bugs from copying the structure using the equals(=) operator,
and having to do the bookkeeping manually, remove these "convenience"
variables.
This is done by splitting variables.errmsg and locale.errmsg to
variables.errmsg_extra and locale.errmsg_extra
The ER() macros in unireg.h now looks more complex than before, but this
isn't critical as most usage of them are with constants and the compiler
will remove most of the test code.
--encrypt-binlog and --encrypt-tmp-files used to mean
"encrypt XXX if encryption is available, otherwise don't encrypt",
now they mean "encrypt or fail with an error".
Instead of encrypt(src, dst, key, iv) that encrypts all
data in one go, now we have encrypt_init(key,iv),
encrypt_update(src,dst), and encrypt_finish(dst).
This also causes collateral changes in the internal my_crypt.cc
encryption functions and in the encryption service.
There are wrappers to provide the old all-at-once encryption
functionality. But binlog events are often written piecewise,
they'll need the new api.
