Where a read-only server permits writes through replication, it
should not permit user connections to commit/rollback XA
transactions prepared via replication. The bug reported in
MDEV-30978 shows that this can happen. This is because there is no
read only check in the XA transaction logic, the most relevant one
occurs in ha_commit_trans() for normal statements/transactions.
This patch extends the XA transaction logic to check the read only
status of the server before performing an XA COMMIT or ROLLBACK.
Reviewed By:
Andrei Elkin <andrei.elkin@mariadb.com>
The new statistics is enabled by adding the "engine", "innodb" or "full"
option to --log-slow-verbosity
Example output:
# Pages_accessed: 184 Pages_read: 95 Pages_updated: 0 Old_rows_read: 1
# Pages_read_time: 17.0204 Engine_time: 248.1297
Page_read_time is time doing physical reads inside a storage engine.
(Writes cannot be tracked as these are usually done in the background).
Engine_time is the time spent inside the storage engine for the full
duration of the read/write/update calls. It uses the same code as
'analyze statement' for calculating the time spent.
The engine statistics is done with a generic interface that should be
easy for any engine to use. It can also easily be extended to provide
even more statistics.
Currently only InnoDB has counters for Pages_% and Undo_% status.
Engine_time works for all engines.
Implementation details:
class ha_handler_stats holds all engine stats. This class is included
in handler and THD classes.
While a query is running, all statistics is updated in the handler. In
close_thread_tables() the statistics is added to the THD.
handler::handler_stats is a pointer to where statistics should be
collected. This is set to point to handler::active_handler_stats if
stats are requested. If not, it is set to 0.
handler_stats has also an element, 'active' that is 1 if stats are
requested. This is to allow engines to avoid doing any 'if's while
updating the statistics.
Cloned or partition tables have the pointer set to the base table if
status are requested.
There is a small performance impact when using --log-slow-verbosity=engine:
- All engine calls in 'select' will be timed.
- IO calls for InnoDB reads will be timed.
- Incrementation of counters are done on local variables and accesses
are inline, so these should have very little impact.
- Statistics has to be reset for each statement for the THD and each
used handler. This is only 40 bytes, which should be neglectable.
- For partition tables we have to loop over all partitions to update
the handler_status as part of table_init(). Can be optimized in the
future to only do this is log-slow-verbosity changes. For this to work
we have to update handler_status for all opened partitions and
also for all partitions opened in the future.
Other things:
- Added options 'engine' and 'full' to log-slow-verbosity.
- Some of the new files in the test suite comes from Percona server, which
has similar status information.
- buf_page_optimistic_get(): Do not increment any counter, since we are
only validating a pointer, not performing any buf_pool.page_hash lookup.
- Added THD argument to save_explain_data_intern().
- Switched arguments for save_explain_.*_data() to have
always THD first (generates better code as other functions also have THD
first).
MDEV-29253 Detect incompatible MySQL partition scheme and either convert
them or report to user and in error log.
This task is about converting in place MySQL 5.6 and 5.7 partition tables
to MariaDB as part of mariadb-upgrade.
- Update TABLE_SHARE::init_from_binary_frm_image() to be able to read
MySQL frm files with partitions.
- Create .par file, if it do not exists, on open of partitioned table.
Executing mariadb-upgrade will create all the missing .par files.
The MySQL .frm file will be changed to MariaDB format after next
ALTER TABLE.
Other changes:
- If we are using stored mysql_version to distingush between MySQL and
MariaDB .frm file information, do not upgrade mysql_version in the
.frm file as part of CHECK TABLE .. FOR UPGRADE as this would cause
problems next time we parse the .frm file.
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This is a backport from 10.5.
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This must be some kind of merge error because at ha_check_engine
we just find out used engine or default engine. There is
no need to roll-back transaction here even if engine is not
supported as it will be handled later.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
If a replica failed to update the GTID slave state when committing
an XA PREPARE, the replica would retry the transaction and get an
out-of-order GTID error. This is because the commit phase of an XA
PREPARE is bifurcated. That is, first, the prepare is handled by the
relevant storage engines. Then second, the GTID slave state is
updated as a separate autocommit transaction. If the second phase
fails, and the transaction is retried, then the same transaction is
attempted to be committed again, resulting in a GTID out-of-order
error.
This patch fixes this error by immediately stopping the slave and
reporting the appropriate error. That is, there was logic to bypass
the error when updating the GTID slave state table if the underlying
error is allowed for retry on a parallel slave. This patch adds a
parameter to disallow the error bypass, thereby forcing the error
state to still happen.
Reviewed By
============
Andrei Elkin <andrei.elkin@mariadb.com>
If we are inside stored function or trigger we should not commit
or rollback current statement transaction.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This error was discovered while working on
MDEV-30540 Wrong result with IN list length reaching
IN_PREDICATE_CONVERSION_THRESHOLD
If there is read error from handler::ha_rnd_next() during a recursive
query, st_select_lex_unit::exec_recursive() will crash as it will try to
get the error code from a structure that was deleted by the callee.
The code was using the construct:
sl->join->exec();
saved_error=sl->join->error;
This does not work as sl->join was freed by the exec() and sl->join would
be set to 0.
Fixed by having JOIN::exec() return the error code.
The included test case simulates the error in ha_rnd_next(), which causes
a crash without the patch.
scovered whle working on
MDEV-30540 Wrong result with IN list length reaching
IN_PREDICATE_CONVERSION_THRESHOLD
If there is read error from handler::ha_rnd_next() during a recursive
query, st_select_lex_unit::exec_recursive() will crash as it will try to
get the error code from a structure that was deleted by the callee.
The code was using the construct:
sl->join->exec();
saved_error=sl->join->error;
This does not work as sl->join was freed by the exec() and sl->join was
set to 0.
Fixed by having JOIN::exec() return the error code.
The included test case simulates the error in ha_rnd_next(), which causes
a crash without the patch.
1. Adding a separate MY_COLLATION_HANDLER
my_collation_ucs2_general_mysql500_ci_handler
implementing a proper order for ucs2_general_mysql500_ci
The problem happened because ucs2_general_mysql500_ci
erroneously used my_collation_ucs2_general_ci_handler.
2. Cosmetic changes: Renaming:
- plane00_mysql500 to my_unicase_mysql500_page00
- my_unicase_pages_mysql500 to my_unicase_mysql500_pages
to use the same naming style with:
- my_unicase_default_page00
- my_unicase_defaul_pages
3. Moving code fragments from
- handler::check_collation_compatibility() in handler.cc
- upgrade_collation() in table.cc
into new methods in class Charset, to reuse the code easier.
The reason for this is that we call file->index_flags(index, 0, 1)
multiple times in best_access_patch()when optimizing a table.
For example, in InnoDB, the calls is not trivial (4 if's and 2 assignments)
Now the function is inlined and is just a memory reference.
Other things:
- handler::is_clustering_key() and pk_is_clustering_key() are now inline.
- Added TABLE::can_use_rowid_filter() to simplify some code.
- Test if we should use a rowid_filter only if can_use_rowid_filter() is
true.
- Added TABLE::is_clustering_key() to avoid a memory reference.
- Simplify some code using the fact that HA_KEYREAD_ONLY is true implies
that HA_CLUSTERED_INDEX is false.
- Added DBUG_ASSERT to TABLE::best_range_rowid_filter() to ensure we
do not call it with a clustering key.
- Reorginized elements in struct st_key to get better memory alignment.
- Updated ha_innobase::index_flags() to not have
HA_DO_RANGE_FILTER_PUSHDOWN for clustered index
"select * from information_schema.tables limit 1" was giving the following
warning in the log:
[ERROR] Invalid (old?) table or database name '#rocksdb'
This includes:
- cleanup and optimization of filtering and pushdown engine code.
- Adjusted costs for rowid filters (based on extensive testing
and profiling).
This made a small two changes to the handler_rowid_filter_is_active()
API:
- One should not call it with a zero pointer!
- One does not need to call handler_rowid_filter_is_active() for every
row anymore. It is enough to check if filter is active by calling it
call it during index_init() or when handler::rowid_filter_changed()
is called
The changes was to avoid unnecessary function calls and checks if
pushdown conditions and rowid_filter is not used.
Updated costs for rowid_filter_lookup() to be closer to reality.
The old cost was based only on rowid_compare_cost. This is now
changed to take into account the overhead in checking the rowid.
Changed the Range_rowid_filter class to use DYNAMIC_ARRAY directly
instead of Dynamic_array<>. This was done to be able to use the new
append_dynamic() functions which gives a notable speed improvment
compared to the old code. Removing the abstraction also makes
the code easier to understand.
The cost of filtering is now slightly lower than before, which
is reflected in some test cases that is now using rowid filters.
This includes all test changes from
"Changing all cost calculation to be given in milliseconds"
and forwards.
Some of the things that caused changes in the result files:
- As part of fixing tests, I added 'echo' to some comments to be able to
easier find out where things where wrong.
- MATERIALIZED has now a higher cost compared to X than before. Because
of this some MATERIALIZED types have changed to DEPENDEND SUBQUERY.
- Some test cases that required MATERIALIZED to repeat a bug was
changed by adding more rows to force MATERIALIZED to happen.
- 'Filtered' in SHOW EXPLAIN has in many case changed from 100.00 to
something smaller. This is because now filtered also takes into
account the smallest possible ref access and filters, even if they
where not used. Another reason for 'Filtered' being smaller is that
we now also take into account implicit filtering done for subqueries
using FIRSTMATCH.
(main.subselect_no_exists_to_in)
This is caluculated in best_access_path() and stored in records_out.
- Table orders has changed because more accurate costs.
- 'index' and 'ALL' for small tables has changed to use 'range' or
'ref' because of optimizer_scan_setup_cost.
- index can be changed to 'range' as 'range' optimizer assumes we don't
have to read the blocks from disk that range optimizer has already read.
This can be confusing in the case where there is no obvious where clause
but instead there is a hidden 'key_column > NULL' added by the optimizer.
(main.subselect_no_exists_to_in)
- Scan on primary clustered key does not report 'Using Index' anymore
(It's a table scan, not an index scan).
- For derived tables, the number of rows is now 100 instead of 2,
which can be seen in EXPLAIN.
- More tests have "Using index for group by" as the cost of this
optimization is now more correct (lower).
- A primary key could be preferred for a normal key, even if it would
access more rows, as it's faster to do 1 lokoup and 3 'index_next' on a
clustered primary key than one lookup trough a secondary.
(main.stat_tables_innodb)
Notes:
- There was a 4.7% more calls to best_extension_by_limited_search() in
the main.greedy_optimizer test. However examining the test results
it looked that the plans where slightly better (eq_ref where more
chained together) so I assume this is ok.
- I have verified a few test cases where there was notable/unexpected
changes in the plan and in all cases the new optimizer plans where
faster. (main.greedy_optimizer and some others)
This solves the current problem in the optimizer
- SELECT FROM big_table
- SELECT from small_table where small_table.eq_ref_key=big_table.id
The old code assumed that each eq_ref access will cause an IO.
As the cost of IO is high, this dominated the cost for the later table
which caused the optimizer to prefer table scans + join cache over
index reads.
This patch fixes this issue by limit the number of expected IO calls,
for rows and index separately, to the size of the table or index or
the number of accesses that we except in a range for the index.
The major changes are:
- Adding a new structure ALL_READ_COST that is mainly used in
best_access_path() to hold the costs parts of the cost we are
calculating. This allows us to limit the number of IO when multiplying
the cost with the previous row combinations.
- All storage engine cost functions are changed to return IO_AND_CPU_COST.
The virtual cost functions should now return in IO_AND_CPU_COST.io
the number of disk blocks that will be accessed instead of the cost
of the access.
- We are not limiting the io_blocks for table or index scans as we
assume that engines may not store these in the 'hot' part of the
cache. Table and index scan also uses much less IO blocks than
key accesses, so the original issue is not as critical with scans.
Other things:
OPT_RANGE now holds a 'Cost_estimate cost' instead a lot of different
costs. All the old costs, like index_only_read, can be extracted
from 'cost'.
- Added to the start of some functions 'handler *file= table->file'
to shorten the code that is using the handler.
- handler->cost() is used to change a ALL_READ_COST or IO_AND_CPU_COST
to 'cost in milliseconds'
- New functions: handler::index_blocks() and handler::row_blocks()
which are used to limit the IO.
- Added index_cost and row_cost to Cost_estimate and removed all not
needed members.
- Removed cost coefficients from Cost_estimate as these don't make sense
when costs (except IO_BLOCKS) are in milliseconds.
- Removed handler::avg_io_cost() and replaced it with DISK_READ_COST.
- Renamed best_range_rowid_filter_for_partial_join() to
best_range_rowid_filter() as using the old name made rows too long.
- Changed all SJ_MATERIALIZATION_INFO 'Cost_estimate' variables to
'double' as Cost_estimate power was not used for these and thus
just caused storage and performance overhead.
- Changed cost_for_index_read() to use 'worst_seeks' to only limit
IO, not number of table accesses. With this patch worst_seeks is
probably not needed anymore, but I kept it around just in case.
- Applying cost for filter got to be much shorter and easier thanks
to the API changes.
- Adjusted cost for fulltext keys in collaboration with Sergei Golubchik.
- Most test changes caused by this patch is that table scans are changed
to use indexes.
- Added ha_seq::keyread_time() and ha_seq::key_scan_time() to get
make checking number of potential IO blocks easier during debugging.
This makes it easier to compare different costs and also allows
the optimizer to optimizer different storage engines more reliably.
- Added tests/check_costs.pl, a tool to verify optimizer cost calculations.
- Most engine costs has been found with this program. All steps to
calculate the new costs are documented in Docs/optimizer_costs.txt
- User optimizer_cost variables are given in microseconds (as individual
costs can be very small). Internally they are stored in ms.
- Changed DISK_READ_COST (was DISK_SEEK_BASE_COST) from a hard disk cost
(9 ms) to common SSD cost (400MB/sec).
- Removed cost calculations for hard disks (rotation etc).
- Changed the following handler functions to return IO_AND_CPU_COST.
This makes it easy to apply different cost modifiers in ha_..time()
functions for io and cpu costs.
- scan_time()
- rnd_pos_time() & rnd_pos_call_time()
- keyread_time()
- Enhanched keyread_time() to calculate the full cost of reading of a set
of keys with a given number of ranges and optional number of blocks that
need to be accessed.
- Removed read_time() as keyread_time() + rnd_pos_time() can do the same
thing and more.
- Tuned cost for: heap, myisam, Aria, InnoDB, archive and MyRocks.
Used heap table costs for json_table. The rest are using default engine
costs.
- Added the following new optimizer variables:
- optimizer_disk_read_ratio
- optimizer_disk_read_cost
- optimizer_key_lookup_cost
- optimizer_row_lookup_cost
- optimizer_row_next_find_cost
- optimizer_scan_cost
- Moved all engine specific cost to OPTIMIZER_COSTS structure.
- Changed costs to use 'records_out' instead of 'records_read' when
recalculating costs.
- Split optimizer_costs.h to optimizer_costs.h and optimizer_defaults.h.
This allows one to change costs without having to compile a lot of
files.
- Updated costs for filter lookup.
- Use a better cost estimate in best_extension_by_limited_search()
for the sorting cost.
- Fixed previous issues with 'filtered' explain column as we are now
using 'records_out' (min rows seen for table) to calculate filtering.
This greatly simplifies the filtering code in
JOIN_TAB::save_explain_data().
This change caused a lot of queries to be optimized differently than
before, which exposed different issues in the optimizer that needs to
be fixed. These fixes are in the following commits. To not have to
change the same test case over and over again, the changes in the test
cases are done in a single commit after all the critical change sets
are done.
InnoDB changes:
- Updated InnoDB to not divide big range cost with 2.
- Added cost for InnoDB (innobase_update_optimizer_costs()).
- Don't mark clustered primary key with HA_KEYREAD_ONLY. This will
prevent that the optimizer is trying to use index-only scans on
the clustered key.
- Disabled ha_innobase::scan_time() and ha_innobase::read_time() and
ha_innobase::rnd_pos_time() as the default engine cost functions now
works good for InnoDB.
Other things:
- Added --show-query-costs (\Q) option to mysql.cc to show the query
cost after each query (good when working with query costs).
- Extended my_getopt with GET_ADJUSTED_VALUE which allows one to adjust
the value that user is given. This is used to change cost from
microseconds (user input) to milliseconds (what the server is
internally using).
- Added include/my_tracker.h ; Useful include file to quickly test
costs of a function.
- Use handler::set_table() in all places instead of 'table= arg'.
- Added SHOW_OPTIMIZER_COSTS to sys variables. These are input and
shown in microseconds for the user but stored as milliseconds.
This is to make the numbers easier to read for the user (less
pre-zeros). Implemented in 'Sys_var_optimizer_cost' class.
- In test_quick_select() do not use index scans if 'no_keyread' is set
for the table. This is what we do in other places of the server.
- Added THD parameter to Unique::get_use_cost() and
check_index_intersect_extension() and similar functions to be able
to provide costs to called functions.
- Changed 'records' to 'rows' in optimizer_trace.
- Write more information to optimizer_trace.
- Added INDEX_BLOCK_FILL_FACTOR_MUL (4) and INDEX_BLOCK_FILL_FACTOR_DIV (3)
to calculate usage space of keys in b-trees. (Before we used numeric
constants).
- Removed code that assumed that b-trees has similar costs as binary
trees. Replaced with engine calls that returns the cost.
- Added Bitmap::find_first_bit()
- Added timings to join_cache for ANALYZE table (patch by Sergei Petrunia).
- Added records_init and records_after_filter to POSITION to remember
more of what best_access_patch() calculates.
- table_after_join_selectivity() changed to recalculate 'records_out'
based on the new fields from best_access_patch()
Bug fixes:
- Some queries did not update last_query_cost (was 0). Fixed by moving
setting thd->...last_query_cost in JOIN::optimize().
- Write '0' as number of rows for const tables with a matching row.
Some internals:
- Engine cost are stored in OPTIMIZER_COSTS structure. When a
handlerton is created, we also created a new cost variable for the
handlerton. We also create a new variable if the user changes a
optimizer cost for a not yet loaded handlerton either with command
line arguments or with SET
@@global.engine.optimizer_cost_variable=xx.
- There are 3 global OPTIMIZER_COSTS variables:
default_optimizer_costs The default costs + changes from the
command line without an engine specifier.
heap_optimizer_costs Heap table costs, used for temporary tables
tmp_table_optimizer_costs The cost for the default on disk internal
temporary table (MyISAM or Aria)
- The engine cost for a table is stored in table_share. To speed up
accesses the handler has a pointer to this. The cost is copied
to the table on first access. If one wants to change the cost one
must first update the global engine cost and then do a FLUSH TABLES.
This was done to be able to access the costs for an open table
without any locks.
- When a handlerton is created, the cost are updated the following way:
See sql/keycaches.cc for details:
- Use 'default_optimizer_costs' as a base
- Call hton->update_optimizer_costs() to override with the engines
default costs.
- Override the costs that the user has specified for the engine.
- One handler open, copy the engine cost from handlerton to TABLE_SHARE.
- Call handler::update_optimizer_costs() to allow the engine to update
cost for this particular table.
- There are two costs stored in THD. These are copied to the handler
when the table is used in a query:
- optimizer_where_cost
- optimizer_scan_setup_cost
- Simply code in best_access_path() by storing all cost result in a
structure. (Idea/Suggestion by Igor)
One effect of this change in the test suite is that tests with very few
rows changed to use sub queries instead of materialization. This is
correct and expected as for these the materialization overhead is too high.
A lot of tests where fixed to still use materialization by adding a
few rows to the tables (most tests has only 2-3 rows and are thus easily
affected when cost computations are changed).
Other things:
- Added more variables to TMPTABLE_COSTS for better cost calculation
- Added cost of copying rows to TMPTABLE_COSTS lookup and write
- Added THD::optimizer_cache_hit_ratio for easier cost calculations
- Added DISK_FAST_READ_SIZE to be used when calculating costs when
reading big blocks from a disk
Variables added:
- optimizer_index_block_copy_cost
- optimizer_key_copy_cost
- optimizer_key_next_find_cost
- optimizer_key_compare_cost
- optimizer_row_copy_cost
- optimizer_where_compare_cost
Some rename of defines was done to make the internal defines similar to
the visible ones:
TIME_FOR_COMPARE -> WHERE_COST; WHERE_COST was also "inverted" to be
a number between 0 and 1 that is multiply with accepted records
(similar to other optimizer variables).
TIME_FOR_COMPARE_IDX -> KEY_COMPARE_COST. This is also inverted,
similar to TIME_FOR_COMPARE.
TIME_FOR_COMPARE_ROWID -> ROWID_COMPARE_COST. This is also inverted,
similar to TIME_FOR_COMPARE.
All default costs are identical to what they where before this patch.
Other things:
- Compare factor in get_merge_buffers_cost() was inverted.
- Changed namespace to static in filesort_utils.cc
Before this patch, when calculating the cost of fetching and using a
row/key from the engine, we took into account the cost of finding a
row or key from the engine, but did not consistently take into account
index only accessed, clustered key or covered keys for all access
paths.
The cost of the WHERE clause (TIME_FOR_COMPARE) was not consistently
considered in best_access_path(). TIME_FOR_COMPARE was used in
calculation in other places, like greedy_search(), but was in some
cases (like scans) done an a different number of rows than was
accessed.
The cost calculation of row and index scans didn't take into account
the number of rows that where accessed, only the number of accepted
rows.
When using a filter, the cost of index_only_reads and cost of
accessing and disregarding 'filtered rows' where not taken into
account, which made filters cost less than there actually where.
To remedy the above, the following key & row fetch related costs
has been added:
- The cost of fetching and using a row is now split into different costs:
- key + Row fetch cost (as before) but multiplied with the variable
'optimizer_cache_cost' (default to 0.5). This allows the user to
tell the optimizer the likehood of finding the key and row in the
engine cache.
- ROW_COPY_COST, The cost copying a row from the engine to the
sql layer or creating a row from the join_cache to the record
buffer. Mostly affects table scan costs.
- ROW_LOOKUP_COST, the cost of fetching a row by rowid.
- KEY_COPY_COST the cost of finding the next key and copying it from
the engine to the SQL layer. This is used when we calculate the cost
index only reads. It makes index scans more expensive than before if
they cover a lot of rows. (main.index_merge_myisam)
- KEY_LOOKUP_COST, the cost of finding the first key in a range.
This replaces the old define IDX_LOOKUP_COST, but with a higher cost.
- KEY_NEXT_FIND_COST, the cost of finding the next key (and rowid).
when doing a index scan and comparing the rowid to the filter.
Before this cost was assumed to be 0.
All of the above constants/variables are now tuned to be somewhat in
proportion of executing complexity to each other. There is tuning
need for these in the future, but that can wait until the above are
made user variables as that will make tuning much easier.
To make the usage of the above easy, there are new (not virtual)
cost calclation functions in handler:
- ha_read_time(), like read_time(), but take optimizer_cache_cost into
account.
- ha_read_and_copy_time(), like ha_read_time() but take into account
ROW_COPY_TIME
- ha_read_and_compare_time(), like ha_read_and_copy_time() but take
TIME_FOR_COMPARE into account.
- ha_rnd_pos_time(). Read row with row id, taking ROW_COPY_COST
into account. This is used with filesort where we don't need
to execute the WHERE clause again.
- ha_keyread_time(), like keyread_time() but take
optimizer_cache_cost into account.
- ha_keyread_and_copy_time(), like ha_keyread_time(), but add
KEY_COPY_COST.
- ha_key_scan_time(), like key_scan_time() but take
optimizer_cache_cost nto account.
- ha_key_scan_and_compare_time(), like ha_key_scan_time(), but add
KEY_COPY_COST & TIME_FOR_COMPARE.
I also added some setup costs for doing different types of scans and
creating temporary tables (on disk and in memory). This encourages
the optimizer to not use these for simple 'a few row' lookups if
there are adequate key lookup strategies.
- TABLE_SCAN_SETUP_COST, cost of starting a table scan.
- INDEX_SCAN_SETUP_COST, cost of starting an index scan.
- HEAP_TEMPTABLE_CREATE_COST, cost of creating in memory
temporary table.
- DISK_TEMPTABLE_CREATE_COST, cost of creating an on disk temporary
table.
When calculating cost of fetching ranges, we had a cost of
IDX_LOOKUP_COST (0.125) for doing a key div for a new range. This is
now replaced with 'io_cost * KEY_LOOKUP_COST (1.0) *
optimizer_cache_cost', which matches the cost we use for 'ref' and
other key lookups. The effect is that the cost is now a bit higher
when we have many ranges for a key.
Allmost all calculation with TIME_FOR_COMPARE is now done in
best_access_path(). 'JOIN::read_time' now includes the full
cost for finding the rows in the table.
In the result files, many of the changes are now again close to what
they where before the "Update cost for hash and cached joins" commit,
as that commit didn't fix the filter cost (too complex to do
everything in one commit).
The above changes showed a lot of a lot of inconsistencies in
optimizer cost calculation. The main objective with the other changes
was to do calculation as similar (and accurate) as possible and to make
different plans more comparable.
Detailed list of changes:
- Calculate index_only_cost consistently and correctly for all scan
and ref accesses. The row fetch_cost and index_only_cost now
takes into account clustered keys, covered keys and index
only accesses.
- cost_for_index_read now returns both full cost and index_only_cost
- Fixed cost calculation of get_sweep_read_cost() to match other
similar costs. This is bases on the assumption that data is more
often stored on SSD than a hard disk.
- Replaced constant 2.0 with new define TABLE_SCAN_SETUP_COST.
- Some scan cost estimates did not take into account
TIME_FOR_COMPARE. Now all scan costs takes this into
account. (main.show_explain)
- Added session variable optimizer_cache_hit_ratio (default 50%). By
adjusting this on can reduce or increase the cost of index or direct
record lookups. The effect of the default is that key lookups is now
a bit cheaper than before. See usage of 'optimizer_cache_cost' in
handler.h.
- JOIN_TAB::scan_time() did not take into account index only scans,
which produced a wrong cost when index scan was used. Changed
JOIN_TAB:::scan_time() to take into consideration clustered and
covered keys. The values are now cached and we only have to call
this function once. Other calls are changed to use the cached
values. Function renamed to JOIN_TAB::estimate_scan_time().
- Fixed that most index cost calculations are done the same way and
more close to 'range' calculations. The cost is now lower than
before for small data sets and higher for large data sets as we take
into account how many keys are read (main.opt_trace_selectivity,
main.limit_rows_examined).
- Ensured that index_scan_cost() ==
range(scan_of_all_rows_in_table_using_one_range) +
MULTI_RANGE_READ_INFO_CONST. One effect of this is that if there
is choice of doing a full index scan and a range-index scan over
almost the whole table then index scan will be preferred (no
range-read setup cost). (innodb.innodb, main.show_explain,
main.range)
- Fixed the EQ_REF and REF takes into account clustered and covered
keys. This changes some plans to use covered or clustered indexes
as these are much cheaper. (main.subselect_mat_cost,
main.state_tables_innodb, main.limit_rows_examined)
- Rowid filter setup cost and filter compare cost now takes into
account fetching and checking the rowid (KEY_NEXT_FIND_COST).
(main.partition_pruning heap.heap_btree main.log_state)
- Added KEY_NEXT_FIND_COST to
Range_rowid_filter_cost_info::lookup_cost to account of the time
to find and check the next key value against the container
- Introduced ha_keyread_time(rows) that takes into account finding
the next row and copying the key value to 'record'
(KEY_COPY_COST).
- Introduced ha_key_scan_time() for calculating an index scan over
all rows.
- Added IDX_LOOKUP_COST to keyread_time() as a startup cost.
- Added index_only_fetch_cost() as a convenience function to
OPT_RANGE.
- keyread_time() cost is slightly reduced to prefer shorter keys.
(main.index_merge_myisam)
- All of the above caused some index_merge combinations to be
rejected because of cost (main.index_intersect). In some cases
'ref' where replaced with index_merge because of the low
cost calculation of get_sweep_read_cost().
- Some index usage moved from PRIMARY to a covering index.
(main.subselect_innodb)
- Changed cost calculation of filter to take KEY_LOOKUP_COST and
TIME_FOR_COMPARE into account. See sql_select.cc::apply_filter().
filter parameters and costs are now written to optimizer_trace.
- Don't use matchings_records_in_range() to try to estimate the number
of filtered rows for ranges. The reason is that we want to ensure
that 'range' is calculated similar to 'ref'. There is also more work
needed to calculate the selectivity when using ranges and ranges and
filtering. This causes filtering column in EXPLAIN EXTENDED to be
100.00 for some cases where range cannot use filtering.
(main.rowid_filter)
- Introduced ha_scan_time() that takes into account the CPU cost of
finding the next row and copying the row from the engine to
'record'. This causes costs of table scan to slightly increase and
some test to changed their plan from ALL to RANGE or ALL to ref.
(innodb.innodb_mysql, main.select_pkeycache)
In a few cases where scan time of very small tables have lower cost
than a ref or range, things changed from ref/range to ALL.
(main.myisam, main.func_group, main.limit_rows_examined,
main.subselect2)
- Introduced ha_scan_and_compare_time() which is like ha_scan_time()
but also adds the cost of the where clause (TIME_FOR_COMPARE).
- Added small cost for creating temporary table for
materialization. This causes some very small tables to use scan
instead of materialization.
- Added checking of the WHERE clause (TIME_FOR_COMPARE) of the
accepted rows to ROR costs in get_best_ror_intersect()
- Removed '- 0.001' from 'join->best_read' and optimize_straight_join()
to ensure that the 'Last_query_cost' status variable contains the
same value as the one that was calculated by the optimizer.
- Take avg_io_cost() into account in handler::keyread_time() and
handler::read_time(). This should have no effect as it's 1.0 by
default, except for heap that overrides these functions.
- Some 'ref_or_null' accesses changed to 'range' because of cost
adjustments (main.order_by)
- Added scan type "scan_with_join_cache" for optimizer_trace. This is
just to show in the trace what kind of scan was used.
- When using 'scan_with_join_cache' take into account number of
preceding tables (as have to restore all fields for all previous
table combination when checking the where clause)
The new cost added is:
(row_combinations * ROW_COPY_COST * number_of_cached_tables).
This increases the cost of join buffering in proportion of the
number of tables in the join buffer. One effect is that full scans
are now done earlier as the cost is then smaller.
(main.join_outer_innodb, main.greedy_optimizer)
- Removed the usage of 'worst_seeks' in cost_for_index_read as it
caused wrong plans to be created; It prefered JT_EQ_REF even if it
would be much more expensive than a full table scan. A related
issue was that worst_seeks only applied to full lookup, not to
clustered or index only lookups, which is not consistent. This
caused some plans to use index scan instead of eq_ref (main.union)
- Changed federated block size from 4096 to 1500, which is the
typical size of an IO packet.
- Added costs for reading rows to Federated. Needed as there is no
caching of rows in the federated engine.
- Added ha_innobase::rnd_pos_time() cost function.
- A lot of extra things added to optimizer trace
- More costs, especially for materialization and index_merge.
- Make lables more uniform
- Fixed a lot of minor bugs
- Added 'trace_started()' around a lot of trace blocks.
- When calculating ORDER BY with LIMIT cost for using an index
the cost did not take into account the number of row retrivals
that has to be done or the cost of comparing the rows with the
WHERE clause. The cost calculated would be just a fraction of
the real cost. Now we calculate the cost as we do for ranges
and 'ref'.
- 'Using index for group-by' is used a bit more than before as
now take into account the WHERE clause cost when comparing
with 'ref' and prefer the method with fewer row combinations.
(main.group_min_max).
Bugs fixed:
- Fixed that we don't calculate TIME_FOR_COMPARE twice for some plans,
like in optimize_straight_join() and greedy_search()
- Fixed bug in save_explain_data where we could test for the wrong
index when displaying 'Using index'. This caused some old plans to
show 'Using index'. (main.subselect_innodb, main.subselect2)
- Fixed bug in get_best_ror_intersect() where 'min_cost' was not
updated, and the cost we compared with was not the one that was
used.
- Fixed very wrong cost calculation for priority queues in
check_if_pq_applicable(). (main.order_by now correctly uses priority
queue)
- When calculating cost of EQ_REF or REF, we added the cost of
comparing the WHERE clause with the found rows, not all row
combinations. This made ref and eq_ref to be regarded way to cheap
compared to other access methods.
- FORCE INDEX cost calculation didn't take into account clustered or
covered indexes.
- JT_EQ_REF cost was estimated as avg_io_cost(), which is half the
cost of a JT_REF key. This may be true for InnoDB primary key, but
not for other unique keys or other engines. Now we use handler
function to calculate the cost, which allows us to handle
consistently clustered, covered keys and not covered keys.
- ha_start_keyread() didn't call extra_opt() if keyread was already
enabled but still changed the 'keyread' variable (which is wrong).
Fixed by not doing anything if keyread is already enabled.
- multi_range_read_info_cost() didn't take into account io_cost when
calculating the cost of ranges.
- fix_semijoin_strategies_for_picked_join_order() used the wrong
record_count when calling best_access_path() for SJ_OPT_FIRST_MATCH
and SJ_OPT_LOOSE_SCAN.
- Hash joins didn't provide correct best_cost to the upper level, which
means that the cost for hash_joins more expensive than calculated
in best_access_path (a difference of 10x * TIME_OF_COMPARE).
This is fixed in the new code thanks to that we now include
TIME_OF_COMPARE cost in 'read_time'.
Other things:
- Added some 'if (thd->trace_started())' to speed up code
- Removed not used function Cost_estimate::is_zero()
- Simplified testing of HA_POS_ERROR in get_best_ror_intersect().
(No cost changes)
- Moved ha_start_keyread() from join_read_const_table() to join_read_const()
to enable keyread for all types of JT_CONST tables.
- Made a few very short functions inline in handler.h
Notes:
- In main.rowid_filter the join order of order and lineitem is swapped.
This is because the cost of doing a range fetch of lineitem(98 rows) is
almost as big as the whole join of order,lineitem. The filtering will
also ensure that we only have to do very small key fetches of the rows
in lineitem.
- main.index_merge_myisam had a few changes where we are now using
less keys for index_merge. This is because index scans are now more
expensive than before.
- handler->optimizer_cache_cost is updated in ha_external_lock().
This ensures that it is up to date per statements.
Not an optimal solution (for locked tables), but should be ok for now.
- 'DELETE FROM t1 WHERE t1.a > 0 ORDER BY t1.a' does not take cost of
filesort into consideration when table scan is chosen.
(main.myisam_explain_non_select_all)
- perfschema.table_aggregate_global_* has changed because an update
on a table with 1 row will now use table scan instead of key lookup.
TODO in upcomming commits:
- Fix selectivity calculation for ranges with and without filtering and
when there is a ref access but scan is chosen.
For this we have to store the lowest known value for
'accepted_records' in the OPT_RANGE structure.
- Change that records_read does not include filtered rows.
- test_if_cheaper_ordering() needs to be updated to properly calculate
costs. This will fix tests like main.order_by_innodb,
main.single_delete_update
- Extend get_range_limit_read_cost() to take into considering
cost_for_index_read() if there where no quick keys. This will reduce
the computed cost for ORDER BY with LIMIT in some cases.
(main.innodb_ext_key)
- Fix that we take into account selectivity when counting the number
of rows we have to read when considering using a index table scan to
resolve ORDER BY.
- Add new calculation for rnd_pos_time() where we take into account the
benefit of reading multiple rows from the same page.
