Problem was that we did not found that table was partitioned
and then we should find what is actual underlaying storage
engine.
We should not use RSU for !InnoDB tables.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
the test failed almost always in release (but not in debug) builds with
--- galera_sst_mariabackup.result
+++ galera_sst_mariabackup.reject
@@ -5,7 +5,7 @@
connection node_1;
select @@innodb_undo_tablespaces;
@@innodb_undo_tablespaces
-0
+3
connection node_2;
select @@innodb_undo_tablespaces;
@@innodb_undo_tablespaces
and
[Warning] InnoDB: Cannot change innodb_undo_tablespaces=0 because previous shutdown was not with innodb_fast_shutdown=0
because mariadbd *before this test* wasn't using innodb_fast_shutdown=0
Fix the bootstrap to use innodb_fast_shutdown=0 (and the bootstrap
creates a starting point for any test that uses a .cnf file)
followup for cac0fc97cca4
also, remove redundant include/have_innodb.inc
The necessary corrections have been made to the results file
for the wsrep_provider_plugin_defaults test, which are necessary
due to the update of the galera library & wsrep-lib.
not default_mysqld.cnf. The latter has only server settings,
it misses mtr-specific client configuration
Except for spider, that doesn't use mysqld.1 server
and default_my.cnf starts it automatically.
Spider tests have to include both default_mysqld.cnf and
default_client.cnf
This commit checks the validity of value change of wsrep_sst_method variable.
The validity check is same as happens in donor node when incoming SST request
is parsed.
The commit has also a mtr test: wsrep.wsrep_variables_sst_method which verifies
that wsrep_sst_method can be succesfully changed to acceptable values and that
the SET command results in error if invalid value was entered.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Post-fix to MDEV-30318 and MDEV-22570-related changes:
unified handling of wsrep_provider by code so that "none"
is interpreted as case-insensitive everywhere and that
work with an empty string is supported everywhere.
Do not compile wsrep_provider plugin if WITH_WSREP is not enabled.
We should not enable wsrep_provider plugin if WSREP_ON=OFF and
at that case we can only print information that Plugin
'wsrep-provider' is disabled.
Make sure tests require Galera library 26.4.14 if needed.
- Provider options are read from the provider during
startup, before plugins are initialized.
- New wsrep_provider plugin for which sysvars are generated
dynamically from options read from the provider.
- The plugin is enabled by option plugin-wsrep-provider=ON.
If enabled, wsrep_provider_options can no longer be used,
(an error is raised on attempts to do so).
- Each option is either string, integer, double or bool
- Options can be dynamic / readonly
- Options can be deprecated
Limitations:
- We do not check that the value of a provider option falls
within a certain range. This type of validation is still
done in Galera side.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
The --skip-write-binlog message was confusing that it only had
an effect if the galera was enabled. There are uses beyond galera
so we apply SET SESSION SQL_LOG_BIN=0 as implied by the option
without being conditional on the wsrep status.
Remove wsrep.mysql_tzinfo_to_sql_symlink{,_skip} tests as they offered
no additional coverage beyond main.mysql_tzinfo_to_sql_symlink as no
server testing was done.
Introduced a variant of the galera.mariadb_tzinfo_to_sql as
galera.mysql_tzinfo_to_sql, which does testing using the mysql client
rather than directly importing into the server via mysqltest.
Update man page and mysql_tzinfo_to_sql to having a --skip-write-binlog
option.
merge notes:
10.4:
- conflicts in tztime.cc can revert to this version of --help text.
- tztime.cc - merge execute immediate @prep1, and leave %s%s trunc_tables, lock_tables
after that.
10.6:
- Need to remove the not_embedded.inc in mysql_tzinfo_to_sql.test and
replace it with no_protocol.inc
- leave both mysql_tzinfo_to_sql.test and mariadb_tzinfo_to_sql.sql
tests.
- sql/tztime.cc - keep entirely 10.6 version.
The --skip-write-binlog message was confusing that it only had
an effect if the galera was enabled. There are uses beyond galera
so we apply SET SESSION SQL_LOG_BIN=0 as implied by the option
without being conditional on the wsrep status.
We also with --skip-write-binlog actually check the session @@WSREP_ON
variable rather than the global server variable.
Since 10.6, the wsrep_mode could replicate Aria and MyISAM, in which
case no change to innodb and back is needed.
By removing the conditions, we can use LOCK TABLES in a general case
improving the load speed of Aria (MDEV-23326), regardless of the
skip-write-binlog flag. The only case where we don't use LOCK TABLES is
when we are replicating via Innodb, because wsrep_on=1 and wsrep_mode
doesn't contain REPLICATE_ARIA{,MYISAM}. This uses an Innodb transaction
instead. When replicating via InnoDB we change the table engine type
back to what it was originally.
By removing the \d and other syntax that requires parsing by
the mariadb client, we can use the generated SQL more generally, like
in the embedded server.
We also save and restore the SQL_LOG_BIN and WSREP_ON session server
variables so this can be included in the same session as other data
without taking into changes in state.
Remove wsrep.mysql_tzinfo_to_sql_symlink{,_skip} tests as they offered
no additional coverage beyond main.mysql_tzinfo_to_sql_symlink (no
server testing was done).
Add galera.mariadb_tzinfo_to_sql to actually test the replication
of tzinfo data through galera.
The conditional executable comment around /*M!100602 ...
START TRANSACTION .. LOCK TABLES.. */ is so that we can provide tzinfo
files (MDEV-27113, MDBF-389) and in the case that a user uses it on a
pre-10.6 server version it will still work. Both START TRANSACTION and
LOCK TABLES are not supported in prepared statements in MariaDB versions
earlier than 10.6.2.
Reviewed by Brandon Nesterenko
Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is
wsrep_thd_LOCK()
wsrep_kill_victim()
lock_rec_other_has_conflicting()
lock_clust_rec_read_check_and_lock()
row_search_mvcc()
ha_innobase::index_read()
ha_innobase::rnd_pos()
handler::ha_rnd_pos()
handler::rnd_pos_by_record()
handler::ha_rnd_pos_by_record()
Rows_log_event::find_row()
Update_rows_log_event::do_exec_row()
Rows_log_event::do_apply_event()
Log_event::apply_event()
wsrep_apply_events()
and mutexes are taken in the order
lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data
When a normal KILL statement is executed, the stack is
innobase_kill_query()
kill_handlerton()
plugin_foreach_with_mask()
ha_kill_query()
THD::awake()
kill_one_thread()
and mutexes are
victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is
wsrep_thd_LOCK()
wsrep_kill_victim()
lock_rec_other_has_conflicting()
lock_clust_rec_read_check_and_lock()
row_search_mvcc()
ha_innobase::index_read()
ha_innobase::rnd_pos()
handler::ha_rnd_pos()
handler::rnd_pos_by_record()
handler::ha_rnd_pos_by_record()
Rows_log_event::find_row()
Update_rows_log_event::do_exec_row()
Rows_log_event::do_apply_event()
Log_event::apply_event()
wsrep_apply_events()
and mutexes are taken in the order
lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data
When a normal KILL statement is executed, the stack is
innobase_kill_query()
kill_handlerton()
plugin_foreach_with_mask()
ha_kill_query()
THD::awake()
kill_one_thread()
and mutexes are
victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This patch also fixes mutex locking order and unprotected
THD member accesses on bf aborting case. We try to hold
THD::LOCK_thd_data during bf aborting. Only case where it
is not possible is at wsrep_abort_transaction before
call wsrep_innobase_kill_one_trx where we take InnoDB
mutexes first and then THD::LOCK_thd_data.
This will also fix possible race condition during
close_connection and while wsrep is disconnecting
connections.
Added wsrep_bf_kill_debug test case
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
galera_var_wsrep_on_off : Add wait conditions to make sure DDL is
replicated before continuing.
wsrep.[variables|variables_debug] : Remove unnecessary parts
and add check to correct number of variables or skip
galera_ssl_reload: Add version check and SSL checks.
* Disallow setting wsrep_on = 1 if wsrep_provider is unset. Also, move
wsrep_on_basic from sys_vars to wsrep suite: this test now requires
to run with wsrep_provider set
* Disallow setting @@session.wsrep_on = 1 when @@global.wsrep_on = 0
* Handle the case where a new connection turns @@global.wsrep_on from
off to on. In this case we would miss a call to wsrep_open, causing
unexpected states in wsrep::client_state (causing assertions).
* Disable wsrep.MDEV-22443 because it is no longer possible to enable
wsrep_on, if server is started with wsrep_provider='none'
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
There were multiple problems here
* wsrep_trx_fragment_size should not be set when wsrep is disabled or provider is not loaded
* wsrep_trx_fragment_unit should not be set when wsrep is disabled or provider is not loaded
* wsrep_debug has no effect if wsrep is disabled or provider is not loaded
* wsrep_start_position should not be set when wsrep is disabled or provider is not loaded any other value than default
* wsrep_start_position should be changed only when we are joiner or initialized
* wsrep_start_position should be allowed to set only a value that exits, thus
we need to add error handling to wsrep_sst_complete
A wsrep transaction was started for EXECUTE IMMEDIATE, which
caused assertion failure when the executed statement was
CREATE TABLE which should be executed in TOI mode.
As a fix, don't start wsrep transaction for EXECUTE IMMEDIATE
to let the wsrep state logic to be handled from inside stored
procedure codepath.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
