This commit makes replicas crash-safe by default by changing the
Using_Gtid value to be Slave_Pos on a fresh slave start and after
RESET SLAVE is issued. If the primary server does not support GTIDs
(i.e., version < 10), the replica will fall back to Using_Gtid=No on
slave start and after RESET SLAVE.
The following additional informational messages/warnings are added:
1. When Using_Gtid is automatically changed. That is, if RESET
SLAVE reverts Using_Gtid back to Slave_Pos, or Using_Gtid is
inferred to No from a CHANGE MASTER TO given with log coordinates
without MASTER_USE_GTID.
2. If options are ignored in CHANGE MASTER TO. If CHANGE MASTER TO
is given with log coordinates, yet also specifies
MASTER_USE_GTID=Slave_Pos, a warning message is given that the log
coordinate options are ignored.
Additionally, an MTR macro has been added for RESET SLAVE,
reset_slave.inc, which provides modes/options for resetting a slave
in log coordinate or gtid modes. When in log coordinates mode, the
macro will execute CHANGE MASTER TO MASTER_USE_GTID=No after the
RESET SLAVE command. When in GTID mode, an extra parameter,
reset_slave_keep_gtid_state, can be set to reset or preserve the
value of gtid_slave_pos.
Reviewed By:
===========
Andrei Elkin <andrei.elkin@mariadb.com>
This makes it clear that the error code has nothing to do with errno.
mysql-test/include/mtr_warnings.sql:
Fixed suppression for new slave error messages
mysql-test/lib/My/Test.pm:
Use 'send' instead of 'print' to avoid errors about "wrong class ... back attempt"
mysql-test/lib/v1/mtr_report.pl:
Fixed suppression for new slave error messages
mysql-test/mysql-test-run.pl:
Fixed suppression for new slave error messages
Removed warning from perl 5.16.2 about arrays
mysql-test/r/flush_read_lock.result:
Fixed suppression for new slave error messages
sql/rpl_reporting.cc:
Instead of writing "Errcode" to the log for Slave errors, use "Internal MariaDB error code"
Adjust full test suite to work with GTID.
Huge patch, mainly due to having to update .result file for all SHOW BINLOG
EVENTS and mysqlbinlog outputs, where the new GTID events pop up.
Everything was painstakingly checked to be still correct and valid .result
file updates.
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
The default storage engine is changed from MyISAM to
InnoDB, in all builds except for the embedded server.
In addition, the following system variables are
changed:
* innodb_file_per_table is enabled
* innodb_strict_mode is enabled
* innodb_file_format_name_update is changed
to 'Barracuda'
The test suite is changed so that tests that do not
explicitly include the have_innodb.inc are run with
--default-storage-engine=MyISAM. This is to ease the
transition, so that most regression tests are run
with the same engine as before.
Some tests are disabled for the embedded server
regression test, as the output of certain statements
will be different that for the regular server
(i.e SELECT @@default_storage_engine). This is to
ease transition.
mysql-test/mysql-test-run.pl:
The regression test suite now adds a
--default-storage-engine=MyISAM for all non-innodb
tests. This behaviour can be controlled by the
default-myisam switch in mysql-test-run
mysql-test/t/bootstrap-master.opt:
The bootstrap test can only be run without InnoDB
as it starts several mysqld instances on the same
datadir. This is possible with MyISAM, but not
with InnoDB.
storage/innobase/CMakeLists.txt:
Build InnoDB per default
storage/innobase/handler/ha_innodb.cc:
Change default values for system variables
Enable file_per_table
Enable strict_mode
Upgrade default file format to Barracuda
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
