Fix some random test failures following MDEV-32168 push.
Don't blindly set $rpl_only_running_threads in many places. Instead explicit
stop only the IO or SQL thread, as appropriate. Setting it interfered with
rpl_end.inc in some cases. Rather than clearing it afterwards, better to
not set it at all when it is not needed, removing ambiguity in the test
about the state of the replication threads.
Don't fail the test if include/stop_slave_io.inc finds an error in the IO
thread after stop. Such errors can be simply because slave stop happened in
the middle of the IO thread's initial communication with the master.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This commit makes replicas crash-safe by default by changing the
Using_Gtid value to be Slave_Pos on a fresh slave start and after
RESET SLAVE is issued. If the primary server does not support GTIDs
(i.e., version < 10), the replica will fall back to Using_Gtid=No on
slave start and after RESET SLAVE.
The following additional informational messages/warnings are added:
1. When Using_Gtid is automatically changed. That is, if RESET
SLAVE reverts Using_Gtid back to Slave_Pos, or Using_Gtid is
inferred to No from a CHANGE MASTER TO given with log coordinates
without MASTER_USE_GTID.
2. If options are ignored in CHANGE MASTER TO. If CHANGE MASTER TO
is given with log coordinates, yet also specifies
MASTER_USE_GTID=Slave_Pos, a warning message is given that the log
coordinate options are ignored.
Additionally, an MTR macro has been added for RESET SLAVE,
reset_slave.inc, which provides modes/options for resetting a slave
in log coordinate or gtid modes. When in log coordinates mode, the
macro will execute CHANGE MASTER TO MASTER_USE_GTID=No after the
RESET SLAVE command. When in GTID mode, an extra parameter,
reset_slave_keep_gtid_state, can be set to reset or preserve the
value of gtid_slave_pos.
Reviewed By:
===========
Andrei Elkin <andrei.elkin@mariadb.com>
On a slow builder, a delay between binlog events on master could
occur, which would cause a heartbeat which is not expected by the
test. The solution is to monitor the timing of binlog events
on the master and only perform the heartbeat check if no critical
delays have happened.
Additionally, an unused variable was removed (this change is
unrelated to the bugfix).
This makes it clear that the error code has nothing to do with errno.
mysql-test/include/mtr_warnings.sql:
Fixed suppression for new slave error messages
mysql-test/lib/My/Test.pm:
Use 'send' instead of 'print' to avoid errors about "wrong class ... back attempt"
mysql-test/lib/v1/mtr_report.pl:
Fixed suppression for new slave error messages
mysql-test/mysql-test-run.pl:
Fixed suppression for new slave error messages
Removed warning from perl 5.16.2 about arrays
mysql-test/r/flush_read_lock.result:
Fixed suppression for new slave error messages
sql/rpl_reporting.cc:
Instead of writing "Errcode" to the log for Slave errors, use "Internal MariaDB error code"
This allows us to avoid calculating variables (including those involving mutex) that doesn't match the given
wildcard in SHOW STATUS LIKE '...'
Removed all references to active_mi that could cause problems for multi-source replication.
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated .pp file
include/mysql/plugin_auth.h.pp:
Updated .pp file
include/mysql/plugin_ftparser.h.pp:
Updated .pp file
mysql-test/suite/multi_source/info_logs.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/info_logs.test:
Test new syntax
mysql-test/suite/multi_source/simple.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/simple.test:
test new syntax
mysql-test/suite/multi_source/syntax.result:
Updated result
mysql-test/suite/multi_source/syntax.test:
Test new syntax
mysql-test/suite/rpl/r/rpl_skip_replication.result:
Updated result
plugin/semisync/semisync_master_plugin.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/item_create.cc:
Simplify code
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Constant -> define
sql/log_event.cc:
Added comment
sql/mysqld.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
Made slave_retried_trans, slave_received_heartbeats and heartbeat_period multi-source safe
Clear variable denied_connections and slave_retried_transactions on startup
sql/mysqld.h:
Added slave_retried_transactions
sql/rpl_mi.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Added start_all_slaves() and stop_all_slaves()
sql/rpl_mi.h:
Added prototypes
sql/rpl_rli.cc:
create_signed_file_name -> create_logfile_name_with_suffix
added executed_entries
sql/rpl_rli.h:
Added executed_entries
sql/share/errmsg-utf8.txt:
More and better error messages
sql/slave.cc:
Added more fields to SHOW ALL SLAVES STATUS
Added slave_retried_transactions
Changed constants -> defines
sql/sql_class.h:
Added comment
sql/sql_insert.cc:
active_mi.rli -> thd->rli_slave
sql/sql_lex.h:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
active_mi.rli -> thd->rli_slave
sql/sql_parse.cc:
Added START|STOP ALL SLAVES
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made REFRESH RELAY LOG multi-source safe
sql/sql_repl.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Don't send my_ok() from start_slave() or stop_slave() so that we can call it for all master connections
sql/sql_show.cc:
Compare wild cards early for all variables
sql/sql_yacc.yy:
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
sql/sys_vars.cc:
Made replicate_events_marked_for_skip,slave_net_timeout and rpl_filter multi-source safe.
sql/sys_vars.h:
Simplify Sys_var_rpl_filter
rpl_heartbeat_basic test fails sporadically on pushbuild because did
not received all heartbeats from slave in circular replication.
MASTER_HEARTBEAT_PERIOD had the default value (slave_net_timeout/2) so
wait on "Heartbeat event received on master", that only waits for 1
minute, sometimes timeout before heartbeat arrives. Fixed setting a
smaller period value.
* rename all debugging related command-line options
and variables to start from "debug-", and made them all
OFF by default.
* replace "MySQL" with "MariaDB" in error messages
* "Cast ... converted ... integer to it's ... complement"
is now a note, not a warning
* @@query_cache_strip_comments now has a session scope,
not global.
Currently, rpl_semi_sync is failing in PB due to the warning message:
"Slave SQL: slave SQL thread is being stopped in the middle of "
"applying of a group having updated a non-transaction table; "
"waiting for the group completion ..."
The problem started happening after the fix for BUG#11762407 what was
automatically suppressing some warning messages.
To fix the current issue, we suppress the aforementioned warning message
and exploit the opportunity to make the sentence clearer.
The error message for ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE was
hard coded. Additionally, the same error was used in three
separate error symptoms: 1. when heartbeat period exceeds the
value of slave_net_timeout, 2. when it is smaller than 1
milisecond and 3. when it was not in range, ie, either negative
or greater than the maximum allowed.
We fix this by splitting into three distinct errors and by
removing the message from the source code and moving it to the
errmsg-utf8.txt file.
Non-determinism of the test was caused by lack of setting a proper value to hb period,
actually fixed by BUG@50767.
These fixes aim at possible non-determinism in comparison of received
hb events by master and slave in the circular part of the test.
Even though the HB periods ratio was choosen to be as high as 10, it's still incorrect
to compare number of hb-events basing only a relation between their periods.
Yet another issue is relatively short 60 secs timeout of wait_for_status_var.inc
makes valgrind runs to fail.
Fixed with deploying wait_for_slave_io_to_start afront of calling wait_for_status_var.
The test is made runnable only with MIXED binlog-format as it has close to 1 min
total exec time and there is nothing format specific in it.
mysql-test/suite/rpl/r/rpl_heartbeat_basic.result:
results are changed.
mysql-test/suite/rpl/t/rpl_heartbeat_basic.test:
Reducing the test env to run in only with MIXED mode;
Simplifying logics of the circular setup to verify only
that HB flows both directions.
Linux x86_64 debug
Two test cases fail because the suppression for the unsafe
warning needs to be updated (BUG@39934 refactored this part and
these changes are only in mysql-next-mr - this is why we notice
them now when merging in next-mr). This is the case for
rpl_nondeterministic_functions and rpl_misc_functions test
cases. rpl_stm_binlog_direct test case is not needed in version >
5.1. The rpl_heartbeat_basic test case fails because patch for
BUG@50397 removed the CHANGE MASTER in the slave that would set
it's period to 1/10 of the master. This would cause the test
assertion to fail.
The fixes for the issues described above are:
- rpl_misc_functions - updated suppression message
- rpl_nondeterministic_functions - updated suppression message
- rpl_stm_binlog_direct - removed the test case (it is not
needed in versions > 5.1)
- rpl_heartbeat_basic - deployed instruction:
CHANGE MASTER TO MASTER_HEARTBEAT_PERIOD=0.1;
Resetting the master before stopping the slave was generating the message
"[ERROR] Slave I/O: Got fatal error 1236 from master when reading data from
binary log: 'could not find next log', Error_code: 1236". In consequence,
the test case was failing because the message had not been suppressed.
To circumvent the failure, we rewrote the test stopping the slave before
resetting the master. We prefer this alternative rather than suppressing
the message.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
CMakeLists.txt:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
client/mysql.cc:
don't crash with --show-warnings when mysqld dies
config/ac-macros/plugins.m4:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
include/my_getopt.h:
comments
include/my_pthread.h:
fix double #define
mysql-test/mysql-test-run.pl:
run sys_vars suite by default
properly recognize envirinment variables (e.g. MTR_MAX_SAVE_CORE) set to 0
escape gdb command line arguments
mysql-test/suite/sys_vars/r/rpl_init_slave_func.result:
init_slave+utf8 bug
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
init_slave+utf8 bug
mysys/my_getopt.c:
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
mysys/typelib.c:
support for flagset
sql/ha_ndbcluster.cc:
backport from telco tree
sql/item_func.cc:
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
sql/sql_builtin.cc.in:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
sql/sql_plugin.cc:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#32902 plugin variables don't know their names
Bug#44797 plugins w/o command-line options have no disabling option in --help
sql/sys_vars.cc:
all server variables are defined here
storage/myisam/ft_parser.c:
remove unnecessary updates of param->quot
storage/myisam/ha_myisam.cc:
myisam_* variables belong here
strings/my_vsnprintf.c:
%o and %llx
unittest/mysys/my_vsnprintf-t.c:
%o and %llx tests
vio/viosocket.c:
bugfix: fix @@wait_timeout to work with socket timeouts (vs. alarm thread)
The issue appears when number of heartbeat events non-zero before start of test
block. But really we need to check that no new events has received during test block.
So I did following:
1. Replace absolute values by diff of values
2. Increase heartbeat period from 1.5 to 5 sec
