- FLUSH GLOBAL STATUS now resets most global_status_vars.
At this stage, this is mainly to be used for testing.
- FLUSH SESSION STATUS added as an alias for FLUSH STATUS.
- FLUSH STATUS does not require any privilege (before required RELOAD).
- FLUSH GLOBAL STATUS requires RELOAD privilege.
- All global status reset moved to FLUSH GLOBAL STATUS.
- Replication semisync status variables are now reset by
FLUSH GLOBAL STATUS.
- In test cases, the only changes are:
- Replace FLUSH STATUS with FLUSH GLOBAL STATUS
- Replace FLUSH STATUS with FLUSH STATUS; FLUSH GLOBAL STATUS.
This was only done in a few tests where the test was using SHOW STATUS
for both local and global variables.
- Uptime_since_flush_status is now always provided, independent if
ENABLED_PROFILING is enabled when compiling MariaDB.
- @@global.Uptime_since_flush_status is reset on FLUSH GLOBAL STATUS
and @@session.Uptime_since_flush_status is reset on FLUSH SESSION STATUS.
- When connected, @@session.Uptime_since_flush_status is set to 0.
MDL wait consists of short 1 second waits (this is not configurable)
repeated until lock_wait_timeout is reached. The stage is changed
to Waiting and back every second. To have predictable result in the
test the query should filter all sequences of X, "Waiting for MDL", X,
leaving just X.
perfschema aggregation, like SHOW STATUS, is only statistically correct.
It doesn't use atomics for performance reasons and might miss individual
increments, particularly when two connections are disconnecting at the
same time.
To have stable results tests should avoid doing it.
In particular:
* @@debug
deprecated since 5.5.37
* sr_YU locale
deprecated since 10.0.11
* "engine_condition_pushdown" in the @@optimizer_switch
deprecated since 10.1.1
* @@date_format, @@datetime_format, @@time_format, @@max_tmp_tables
deprecated since 10.1.2
* @@wsrep_causal_reads
deprecated since 10.1.3
* "parser" in mroonga table comment
deprecated since 10.2.11
This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.
Renames the upgrade state file, and ensures the old
file is properly removed when `mariadb-upgrade` tool is executed.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer
Amazon Web Services, Inc.
* FreeBSD returns errno 31 (EMLINK, Too many links),
not 40 (ELOOP, Too many levels of symbolic links)
* (`mysqlbinlog|mysql`) was just crazy, why did it ever work?
* socket_ipv6.inc check (that checked whether ipv6 is supported)
only worked correctly when ipv6 was supported
* perfschema.socket_summary_by_instance was changing global variables
and then skip-ing the test (because on missing ipv6)
The call mtr.add_suppression() that was added
in commit 75b7cd680b
for MemorySanitizer and Valgrind runs is causing
a result difference for the test rpl.rpl_gtid_stop_start.
Let us disable the binlog for executing that statement.
Also, the test perfschema.statement_program_lost_inst
would fail due to the changes to have_innodb.inc in this commit.
To compensate for that, we will make more --suite=perfschema
tests run without InnoDB, and explicitly enable InnoDB in
those tests that depend on a transactional storage engine.
The InnoDB redo log used to be formatted in blocks of 512 bytes.
The log blocks were encrypted and the checksum was calculated while
holding log_sys.mutex, creating a serious scalability bottleneck.
We remove the fixed-size redo log block structure altogether and
essentially turn every mini-transaction into a log block of its own.
This allows encryption and checksum calculations to be performed
on local mtr_t::m_log buffers, before acquiring log_sys.mutex.
The mutex only protects a memcpy() of the data to the shared
log_sys.buf, as well as the padding of the log, in case the
to-be-written part of the log would not end in a block boundary of
the underlying storage. For now, the "padding" consists of writing
a single NUL byte, to allow recovery and mariadb-backup to detect
the end of the circular log faster.
Like the previous implementation, we will overwrite the last log block
over and over again, until it has been completely filled. It would be
possible to write only up to the last completed block (if no more
recent write was requested), or to write dummy FILE_CHECKPOINT records
to fill the incomplete block, by invoking the currently disabled
function log_pad(). This would require adjustments to some logic around
log checkpoints, page flushing, and shutdown.
An upgrade after a crash of any previous version is not supported.
Logically empty log files from a previous version will be upgraded.
An attempt to start up InnoDB without a valid ib_logfile0 will be
refused. Previously, the redo log used to be created automatically
if it was missing. Only with with innodb_force_recovery=6, it is
possible to start InnoDB in read-only mode even if the log file
does not exist. This allows the contents of a possibly corrupted
database to be dumped.
Because a prepared backup from an earlier version of mariadb-backup
will create a 0-sized log file, we will allow an upgrade from such
log files, provided that the FIL_PAGE_FILE_FLUSH_LSN in the system
tablespace looks valid.
The 512-byte log checkpoint blocks at 0x200 and 0x600 will be replaced
with 64-byte log checkpoint blocks at 0x1000 and 0x2000.
The start of log records will move from 0x800 to 0x3000. This allows us
to use 4096-byte aligned blocks for all I/O in a future revision.
We extend the MDEV-12353 redo log record format as follows.
(1) Empty mini-transactions or extra NUL bytes will not be allowed.
(2) The end-of-minitransaction marker (a NUL byte) will be replaced
with a 1-bit sequence number, which will be toggled each time when the
circular log file wraps back to the beginning.
(3) After the sequence bit, a CRC-32C checksum of all data
(excluding the sequence bit) will written.
(4) If the log is encrypted, 8 bytes will be written before
the checksum and included in it. This is part of the
initialization vector (IV) of encrypted log data.
(5) File names, page numbers, and checkpoint information will not be
encrypted. Only the payload bytes of page-level log will be encrypted.
The tablespace ID and page number will form part of the IV.
(6) For padding, arbitrary-length FILE_CHECKPOINT records may be written,
with all-zero payload, and with the normal end marker and checksum.
The minimum size is 7 bytes, or 7+8 with innodb_encrypt_log=ON.
In mariadb-backup and in Galera snapshot transfer (SST) scripts, we will
no longer remove ib_logfile0 or create an empty ib_logfile0. Server startup
will require a valid log file. When resizing the log, we will create
a logically empty ib_logfile101 at the current LSN and use an atomic rename
to replace ib_logfile0 with it. See the test innodb.log_file_size.
Because there is no mandatory padding in the log file, we are able
to create a dummy log file as of an arbitrary log sequence number.
See the test mariabackup.huge_lsn.
The parameter innodb_log_write_ahead_size and the
INFORMATION_SCHEMA.INNODB_METRICS counter log_padded will be removed.
The minimum value of innodb_log_buffer_size will be increased to 2MiB
(because log_sys.buf will replace recv_sys.buf) and the increment
adjusted to 4096 bytes (the maximum log block size).
The following INFORMATION_SCHEMA.INNODB_METRICS counters will be removed:
os_log_fsyncs
os_log_pending_fsyncs
log_pending_log_flushes
log_pending_checkpoint_writes
The following status variables will be removed:
Innodb_os_log_fsyncs (this is included in Innodb_data_fsyncs)
Innodb_os_log_pending_fsyncs (this was limited to at most 1 by design)
log_sys.get_block_size(): Return the physical block size of the log file.
This is only implemented on Linux and Microsoft Windows for now, and for
the power-of-2 block sizes between 64 and 4096 bytes (the minimum and
maximum size of a checkpoint block). If the block size is anything else,
the traditional 512-byte size will be used via normal file system
buffering.
If the file system buffers can be bypassed, a message like the following
will be issued:
InnoDB: File system buffers for log disabled (block size=512 bytes)
InnoDB: File system buffers for log disabled (block size=4096 bytes)
This has been tested on Linux and Microsoft Windows with both sizes.
On Linux, only enable O_DIRECT on the log for innodb_flush_method=O_DSYNC.
Tests in 3 different environments where the log is stored in a device
with a physical block size of 512 bytes are yielding better throughput
without O_DIRECT. This could be due to the fact that in the event the
last log block is being overwritten (if multiple transactions would
become durable at the same time, and each of will write a small
number of bytes to the last log block), it should be faster to re-copy
data from log_sys.buf or log_sys.flush_buf to the kernel buffer,
to be finally written at fdatasync() time.
The parameter innodb_flush_method=O_DSYNC will imply O_DIRECT for
data files. This option will enable O_DIRECT on the log file on Linux.
It may be unsafe to use when the storage device does not support
FUA (Force Unit Access) mode.
When the server is compiled WITH_PMEM=ON, we will use memory-mapped
I/O for the log file if the log resides on a "mount -o dax" device.
We will identify PMEM in a start-up message:
InnoDB: log sequence number 0 (memory-mapped); transaction id 3
On Linux, we will also invoke mmap() on any ib_logfile0 that resides
in /dev/shm, effectively treating the log file as persistent memory.
This should speed up "./mtr --mem" and increase the test coverage of
PMEM on non-PMEM hardware. It also allows users to estimate how much
the performance would be improved by installing persistent memory.
On other tmpfs file systems such as /run, we will not use mmap().
mariadb-backup: Eliminated several variables. We will refer
directly to recv_sys and log_sys.
backup_wait_for_lsn(): Detect non-progress of
xtrabackup_copy_logfile(). In this new log format with
arbitrary-sized blocks, we can only detect log file overrun
indirectly, by observing that the scanned log sequence number
is not advancing.
xtrabackup_copy_logfile(): On PMEM, do not modify the sequence bit,
because we are not allowed to modify the server's log file, and our
memory mapping is read-only.
trx_flush_log_if_needed_low(): Do not use the callback on pmem.
Using neither flush_lock nor write_lock around PMEM writes seems
to yield the best performance. The pmem_persist() calls may
still be somewhat slower than the pwrite() and fdatasync() based
interface (PMEM mounted without -o dax).
recv_sys_t::buf: Remove. We will use log_sys.buf for parsing.
recv_sys_t::MTR_SIZE_MAX: Replaces RECV_SCAN_SIZE.
recv_sys_t::file_checkpoint: Renamed from mlog_checkpoint_lsn.
recv_sys_t, log_sys_t: Removed many data members.
recv_sys.lsn: Renamed from recv_sys.recovered_lsn.
recv_sys.offset: Renamed from recv_sys.recovered_offset.
log_sys.buf_size: Replaces srv_log_buffer_size.
recv_buf: A smart pointer that wraps log_sys.buf[recv_sys.offset]
when the buffer is being allocated from the memory heap.
recv_ring: A smart pointer that wraps a circular log_sys.buf[] that is
backed by ib_logfile0. The pointer will wrap from recv_sys.len
(log_sys.file_size) to log_sys.START_OFFSET. For the record that
wraps around, we may copy file name or record payload data to
the auxiliary buffer decrypt_buf in order to have a contiguous
block of memory. The maximum size of a record is less than
innodb_page_size bytes.
recv_sys_t::parse(): Take the smart pointer as a template parameter.
Do not temporarily add a trailing NUL byte to FILE_ records, because
we are not supposed to modify the memory-mapped log file. (It is
attached in read-write mode already during recovery.)
recv_sys_t::parse_mtr(): Wrapper for recv_sys_t::parse().
recv_sys_t::parse_pmem(): Like parse_mtr(), but if PREMATURE_EOF would be
returned on PMEM, use recv_ring to wrap around the buffer to the start.
mtr_t::finish_write(), log_close(): Do not enforce log_sys.max_buf_free
on PMEM, because it has no meaning on the mmap-based log.
log_sys.write_to_buf: Count writes to log_sys.buf. Replaces
srv_stats.log_write_requests and export_vars.innodb_log_write_requests.
Protected by log_sys.mutex. Updated consistently in log_close().
Previously, mtr_t::commit() conditionally updated the count,
which was inconsistent.
log_sys.write_to_log: Count swaps of log_sys.buf and log_sys.flush_buf,
for writing to log_sys.log (the ib_logfile0). Replaces
srv_stats.log_writes and export_vars.innodb_log_writes.
Protected by log_sys.mutex.
log_sys.waits: Count waits in append_prepare(). Replaces
srv_stats.log_waits and export_vars.innodb_log_waits.
recv_recover_page(): Do not unnecessarily acquire
log_sys.flush_order_mutex. We are inserting the blocks in arbitary
order anyway, to be adjusted in recv_sys.apply(true).
We will change the definition of flush_lock and write_lock to
avoid potential false sharing. Depending on sizeof(log_sys) and
CPU_LEVEL1_DCACHE_LINESIZE, the flush_lock and write_lock could
share a cache line with each other or with the last data members
of log_sys.
Thanks to Matthias Leich for providing https://rr-project.org traces
for various failures during the development, and to
Thirunarayanan Balathandayuthapani for his help in debugging
some of the recovery code. And thanks to the developers of the
rr debugger for a tool without which extensive changes to InnoDB
would be very challenging to get right.
Thanks to Vladislav Vaintroub for useful feedback and
to him, Axel Schwenke and Krunal Bauskar for testing the performance.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
Removed LOCK_connection_count.
Removed duplicate denied_connections and connection_errors_max_connection
increment from create_new_thread(). Another increment done by
CONNECT::close_with_error().
Simplified away CONNECT::thread_count_incremented. Now close_with_error()
is always called with connection_count incremented.
Part of MDEV-19515 - Improve connect speed
This was done to get more information about where time is spent.
Now we can get proper timing for time spent in commit, rollback,
binlog write etc.
Following stages was added:
- Commit
- Commit_implicit
- Rollback
- Rollback implicit
- Binlog write
- Init for update
- This is used instead of "Init" for insert, update and delete.
- Staring cleanup
Following stages where changed:
- "Unlocking tables" stage reset stage to previous stage at end
- "binlog write" stage resets stage to previous stage at end
- "end" -> "end of update loop"
- "cleaning up" -> "Reset for next command"
- Added stage_searching_rows_for_update when searching for rows
to be deleted.
Other things:
- Renamed all stages to start with big letter (before there was no
consitency)
- Increased performance_schema_max_stage_classes from 150 to 160.
- Most of the test changes in performance schema comes from renaming of
stages.
- Removed duplicate output of variables and inital state in a lot of
performance schema tests.
This was done to make it easier to change a default value for a
performance variable without affecting all tests.
- Added start_server_variables.test to check configuration
- Removed some duplicate "closing tables" stages
- Updated position for "stage_init_update" and "stage_updating" for
delete, insert and update to be just before update loop (for more
exact timing).
- Don't set "Checking permissions" twice in a row.
- Remove stage_end stage from creating views (not done for create table
either).
- Updated default performance history size from 10 to 20 because of new
stages
- Ensure that ps_enabled is correct (to be used in a later patch)
