Fix some random test failures following MDEV-32168 push.
Don't blindly set $rpl_only_running_threads in many places. Instead explicit
stop only the IO or SQL thread, as appropriate. Setting it interfered with
rpl_end.inc in some cases. Rather than clearing it afterwards, better to
not set it at all when it is not needed, removing ambiguity in the test
about the state of the replication threads.
Don't fail the test if include/stop_slave_io.inc finds an error in the IO
thread after stop. Such errors can be simply because slave stop happened in
the middle of the IO thread's initial communication with the master.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Compute binlog checksums (when enabled) already when writing events
into the statement or transaction caches, where before it was done
when the caches are copied to the real binlog file. This moves the
checksum computation outside of holding LOCK_log, improving
scalabitily.
At stmt/trx cache write time, the final end_log_pos values are not
known, so with this patch these will be set to 0. Events that are
written directly to the binlog file (not through stmt/trx cache) keep
the correct end_log_pos value. The GTID and COMMIT/XID events at the
start and end of event groups are written directly, so the zero
end_log_pos is only for events in the middle of event groups, which
do not negatively affect replication.
An option --binlog-legacy-event-pos, off by default, is provided to
disable this behavior to provide backwards compatibility with any
external applications that might rely on end_log_pos in events in the
middle of event groups.
Checksums cannot be pre-computed when binlog encryption is enabled, as
encryption relies on correct end_log_pos to provide part of the
nonce/IV.
Checksum pre-computation is also disabled for WSREP/Galera, as it uses
events differently in its write-sets and so on. Extending pre-computation of
checksums to Galera where it makes sense could be added in a future patch.
The current --binlog-checksum configuration is saved in
binlog_cache_data at transaction start and used to pre-compute
checksums in cache, if applicable. When the cache is later copied to
the binlog, a check is made if the saved value still matches the
configured global value; if so, the events are block-copied directly
into the binlog file. If --binlog-checksum was changed during the
transaction, events are re-written to the binlog file one-by-one and
the checksums recomputed/discarded as appropriate.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
remove old deprecation helpers that were not used anywhere.
create new deprecation helpers and enforce their usage
this also removes inconsistencies in reporting deprecation:
sometimes it was ER_WARN_DEPRECATED_SYNTAX (1287),
sometimes ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT (1681),
sometimes a warning, sometimes a note.
it should always be
* ER_WARN_DEPRECATED_SYNTAX
* a warning (because it's something actionable, not purely informational)
Restore code to make InnoDB choose the second transaction as a deadlock
victim if two transactions deadlock that need to commit in-order for
parallel replication. This code was erroneously removed when VATS was
implemented in InnoDB.
Also add a test case for InnoDB choosing the right deadlock victim.
Also fixes this bug, with testcase that reliably reproduces:
MDEV-28776: rpl.rpl_mark_optimize_tbl_ddl fails with timeout on sync_with_master
Note: This should be null-merged to 10.6, as a different fix is needed
there due to InnoDB locking code changes.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
A simple "SET SESSION gtid_seq_no= DEFAULT" did not work, it would straight
up crash the server! Also, explicitly setting gtid_seq_no to 0 gave an error
in --gtid-strict-mode=1.
Setting to DEFAULT or 0 should disable any prior setting of
gtid_seq_no, so that the next transaction is allocated the next GTID
in sequence, as normal.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Problem:
========
A master can segfault if it can't set up decryption for its binary
log during a binlog dump with Using_Gtid=Slave_Pos. If slave
connects using GTID mode, the master will call into
log.cc::get_gtid_list_event(), which iterate through binlog events
looking for a Gtid_list_log_event. On an encrypted binlog that the
master cannot decrypt, the first event will be a
START_ENCRYPTION_EVENT which will call into the following decryption branch
if (fdle->start_decryption((Start_encryption_log_event*) ev))
errormsg= ‘Could not set up decryption for binlog.’;
The event iteration however, does not stop in spite of this error.
The master will try to read the next event, but segfault while
trying to decrypt it because decryption failed to initialize.
Solution:
========
Break the event iteration if decryption cannot be set up.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
SUPER privilege used to allow various actions that were alternatively
allowed by one of BINLOG ADMIN, BINLOG MONITOR, BINLOG REPLAY,
CONNECTION ADMIN, FEDERATED ADMIN, REPL MASTER ADMIN, REPL SLAVE ADMIN,
SET USER, SLAVE MONITOR.
Now SUPER no longer does that, one has to grant one of the fine-grained
privileges above to be to perform corresponding actions.
On upgrade from MariaDB versions 10.11 and below all the privileges
above are granted automatically if the user has SUPER.
As a side-effect, such an upgrade will allow SUPER-user to run SHOW
BINLOG EVENTS, SHOW RELAYLOG EVENTS, SHOW SLAVE HOSTS, even if he wasn't
able to do it before the upgrade.
Before commit 6112853cdab2770e92f9cfefdfef9c0a14b71cb7 in MySQL 4.1.1
introduced the parameter innodb_file_per_table, all InnoDB data was
written to the InnoDB system tablespace (often named ibdata1).
A serious design problem is that once the system tablespace has grown to
some size, it cannot shrink even if the data inside it has been deleted.
There are also other design problems, such as the server hang MDEV-29930
that should only be possible when using innodb_file_per_table=0 and
innodb_undo_tablespaces=0 (storing both tables and undo logs in the
InnoDB system tablespace).
The parameter innodb_change_buffering was deprecated
in commit b5852ffbeebc3000982988383daeefb0549e058a.
Starting with commit baf276e6d4a44fe7cdf3b435c0153da0a42af2b6
(MDEV-19229) the number of innodb_undo_tablespaces can be increased,
so that the undo logs can be moved out of the system tablespace
of an existing installation.
If all these things (tables, undo logs, and the change buffer) are
removed from the InnoDB system tablespace, the only variable-size
data structure inside it is the InnoDB data dictionary.
DDL operations on .ibd files was optimized in
commit 86dc7b4d4cfe15a2d37f8b5f60c4fce5dba9491d (MDEV-24626).
That should have removed any thinkable performance advantage of
using innodb_file_per_table=0.
Since there should be no benefit of setting innodb_file_per_table=0,
the parameter should be deprecated. Starting with MySQL 5.6 and
MariaDB Server 10.0, the default value is innodb_file_per_table=1.
Specifically:
Revert "MDEV-29664 Assertion `!n_mysql_tables_in_use' failed in innobase_close_connection"
This reverts commit ba875e939619baefb08936863a889830f595e426.
Revert "MDEV-29620 Assertion `next_insert_id == 0' failed in handler::ha_external_lock"
This reverts commit aa08a7442a5141750de96353132c7799e10c9302.
Revert "MDEV-29628 Memory leak after CREATE OR REPLACE with foreign key"
This reverts commit c579d66ba689c8a20a951de5e6be2e1bc255ba7f.
Revert "MDEV-29609 create_not_windows test fails with different result"
This reverts commit cb583b2f1bf1c910e82c7caee4a53e0f3ff954ba.
Revert "MDEV-29544 SIGSEGV in HA_CREATE_INFO::finalize_locked_tables"
This reverts commit dcd66c3814991e686615eac2e65d01a7fa80cb66.
Revert "MDEV-28933 CREATE OR REPLACE fails to recreate same constraint name"
This reverts commit cf6c5176328c8fbfadac80f337ef285732cc8d06.
Revert "MDEV-28933 Moved RENAME_CONSTRAINT_IDS to include/sql_funcs.h"
This reverts commit f1e1c1335b506905244502ee8584736a17a6ecd0.
Revert "MDEV-28956 Locking is broken if CREATE OR REPLACE fails under LOCK TABLES"
This reverts commit a228ec80e30cae59c2057b786fd3559171ce794f.
Revert "MDEV-25292 gcol.gcol_bugfixes --ps fix"
This reverts commit 24fff8267d0722b20ca780cf144ce27560df1394.
Revert "MDEV-25292 Disable atomic replace for slave-generated or-replace"
This reverts commit 2af15914cb3ae204d3b413995a96c7722ad60d93.
Revert "MDEV-25292 backup_log improved"
This reverts commit 34398a20b5829f0508c78bc8f765f7bef6e0ad48.
Revert "MDEV-25292 Atomic CREATE OR REPLACE TABLE"
This reverts commit 93c8252f02faa8ad8dc5f005e52f1990c29d4a0d.
Revert "MDEV-25292 Table_name class for (db, table_name, alias)"
This reverts commit d145dda9c7b6db394edf7150cc255343a4a7b116.
Revert "MDEV-25292 ha_table_exists() cleanup and improvement"
This reverts commit 409b8a86de45efc96377c618a99cff1301523150.
Revert "MDEV-25292 Cleanups"
This reverts commit 595dad83ad3c23879c59deec1173ea16b47871ed.
Revert "MDEV-25292 Refactoring: moved select_field_count into Alter_info."
This reverts commit f02af1d2295f108d96671b5a4f731ec998002dd5.
Atomic CREATE OR REPLACE allows to keep an old table intact if the
command fails or during the crash. That is done through creating
a table with a temporary name and filling it with the data
(for CREATE OR REPLACE .. SELECT), then renaming the original table
to another temporary (backup) name and renaming the replacement table
to original table. The backup table is kept until the last chance of
failure and if that happens, the replacement table is thrown off and
backup recovered. When the command is complete and logged the backup
table is deleted.
Atomic replace algorithm
Two DDL chains are used for CREATE OR REPLACE:
ddl_log_state_create (C) and ddl_log_state_rm (D).
1. (C) Log CREATE_TABLE_ACTION of TMP table (drops TMP table);
2. Create new table as TMP;
3. Do everything with TMP (like insert data);
finalize_atomic_replace():
4. Link chains: (D) is executed only if (C) is closed;
5. (D) Log DROP_ACTION of BACKUP;
6. (C) Log RENAME_TABLE_ACTION from ORIG to BACKUP (replays BACKUP -> ORIG);
7. Rename ORIG to BACKUP;
8. (C) Log CREATE_TABLE_ACTION of ORIG (drops ORIG);
9. Rename TMP to ORIG;
finalize_ddl() in case of success:
10. Close (C);
11. Replay (D): BACKUP is dropped.
finalize_ddl() in case of error:
10. Close (D);
11. Replay (C):
1) ORIG is dropped (only after finalize_atomic_replace());
2) BACKUP renamed to ORIG (only after finalize_atomic_replace());
3) drop TMP.
If crash happens (C) or (D) is replayed in reverse order. (C) is
replayed if crash happens before it is closed, otherwise (D) is
replayed.
Temporary table for CREATE OR REPLACE
Before dropping "old" table, CREATE OR REPLACE creates "tmp" table.
ddl_log_state_create holds the drop of the "tmp" table. When
everything is OK (data is inserted, "tmp" is ready) ddl_log_state_rm
is written to replace "old" with "tmp". Until ddl_log_state_create
is closed ddl_log_state_rm is not executed.
After the binlogging is done ddl_log_state_create is closed. At that
point ddl_log_state_rm is executed and "tmp" is replaced with
"old". That is: final rename is done by the DDL log.
With that important role of DDL log for CREATE OR REPLACE operation
replay of ddl_log_state_rm must fail at the first hit error and
print the error message if possible. F.ex. foreign key error is
discovered at this phase: InnoDB rejects to drop the "old" table and
returns corresponding foreign key error code.
Additional notes
- CREATE TABLE without REPLACE is not affected by this commit.
- Engines having HTON_EXPENSIVE_RENAME flag set are not affected by
this commit.
- CREATE TABLE .. SELECT XID usage is fixed and now there is no need
to log DROP TABLE via DDL_CREATE_TABLE_PHASE_LOG (see comments in
do_postlock()). XID is now correctly updated so it disables
DDL_LOG_DROP_TABLE_ACTION. Note that binary log is flushed at the
final stage when the table is ready. So if we have XID in the
binary log we don't need to drop the table.
- Three variations of CREATE OR REPLACE handled:
1. CREATE OR REPLACE TABLE t1 (..);
2. CREATE OR REPLACE TABLE t1 LIKE t2;
3. CREATE OR REPLACE TABLE t1 SELECT ..;
- Test case uses 6 combinations for engines (aria, aria_notrans,
myisam, ib, lock_tables, expensive_rename) and 2 combinations for
binlog types (row, stmt). Combinations help to check differences
between the results. Error failures are tested for the above three
variations.
- expensive_rename tests CREATE OR REPLACE without atomic
replace. The effect should be the same as with the old behaviour
before this commit.
- Triggers mechanism is unaffected by this change. This is tested in
create_replace.test.
- LOCK TABLES is affected. Lock restoration must be done after "rm"
chain is replayed.
- Moved ddl_log_complete() from send_eof() to finalize_ddl(). This
checkpoint was not executed before for normal CREATE TABLE but is
executed now.
- CREATE TABLE will now rollback also if writing to the binary
logging failed. See rpl_gtid_strict.test
Rename and drop via DDL log
We replay ddl_log_state_rm to drop the old table and rename the
temporary table. In that case we must throw the correct error
message if ddl_log_revert() fails (f.ex. on FK error).
If table is deleted earlier and not via DDL log and the crash
happened, the create chain is not closed. Linked drop chain is not
executed and the new table is not installed. But the old table is
already deleted.
ddl_log.cc changes
Now we can place action before DDL_LOG_DROP_INIT_ACTION and it will
be replayed after DDL_LOG_DROP_TABLE_ACTION.
report_error parameter for ddl_log_revert() allows to fail at first
error and print the error message if possible.
ddl_log_execute_action() now can print error message.
Since we now can handle errors from ddl_log_execute_action() (in
case of non-recovery execution) unconditional setting "error= TRUE"
is wrong (it was wrong anyway because it was overwritten at the end
of the function).
On XID usage
Like with all other atomic DDL operations XID is used to avoid
inconsistency between master and slave in the case of a crash after
binary log is written and before ddl_log_state_create is closed. On
recovery XIDs are taken from binary log and corresponding DDL log
events get disabled. That is done by
ddl_log_close_binlogged_events().
On linking two chains together
Chains are executed in the ascending order of entry_pos of execute
entries. But entry_pos assignment order is undefined: it may assign
bigger number for the first chain and then smaller number for the
second chain. So the execution order in that case will be reverse:
second chain will be executed first.
To avoid that we link one chain to another. While the base chain
(ddl_log_state_create) is active the secondary chain
(ddl_log_state_rm) is not executed. That is: only one chain can be
executed in two linked chains.
The interface ddl_log_link_chains() was done in "MDEV-22166
ddl_log_write_execute_entry() extension".
More on CREATE OR REPLACE .. SELECT
We use create_and_open_tmp_table() like in ALTER TABLE to create
temporary TABLE object (tmp_table is (NON_)TRANSACTIONAL_TMP_TABLE).
After we created such TABLE object we use create_info->tmp_table()
instead of table->s->tmp_table when we need to check for
parser-requested tmp-table.
External locking is required for temporary table created by
create_and_open_tmp_table(). F.ex. that disables logging for Aria
transactional tables and without that (when no mysql_lock_tables()
is done) it cannot work correctly.
For making external lock the patch requires Aria table to work in
non-transactional mode. That is usually done by
ha_enable_transaction(false). But we cannot disable transaction
completely because: 1. binlog rollback removes pending row events
(binlog_remove_pending_rows_event()). The row events are added
during CREATE .. SELECT data insertion phase. 2. replication slave
highly depends on transaction and cannot work without it.
So we put temporary Aria table into non-transactional mode with
"thd->transaction->on hack". See comment for on_save variable.
Note that Aria table has internal_table mode. But we cannot use it
because:
if (!internal_table)
{
mysql_mutex_lock(&THR_LOCK_myisam);
old_info= test_if_reopen(name_buff);
}
For internal_table test_if_reopen() is not called and we get a new
MARIA_SHARE for each file handler. In that case duplicate errors are
missed because insert and lookup in CREATE .. SELECT is done via two
different handlers (see create_lookup_handler()).
For temporary table before dropping TABLE_SHARE by
drop_temporary_table() we must do ha_reset(). ha_reset() releases
storage share. Without that the share is kept and the second CREATE
OR REPLACE .. SELECT fails with:
HA_ERR_TABLE_EXIST (156): MyISAM table '#sql-create-b5377-4-t2' is
in use (most likely by a MERGE table). Try FLUSH TABLES.
HA_EXTRA_PREPARE_FOR_DROP also removes MYISAM_SHARE, but that is
not needed as ha_reset() does the job.
ha_reset() is usually done by
mark_tmp_table_as_free_for_reuse(). But we don't need that mechanism
for our temporary table.
Atomic_info in HA_CREATE_INFO
Many functions in CREATE TABLE pass the same parameters. These
parameters are part of table creation info and should be in
HA_CREATE_INFO (or whatever). Passing parameters via single
structure is much easier for adding new data and
refactoring.
InnoDB changes (revised by Marko Mäkelä)
row_rename_table_for_mysql(): Specify the treatment of FOREIGN KEY
constraints in a 4-valued enum parameter. In cases where FOREIGN KEY
constraints cannot exist (partitioned tables, or internal tables of
FULLTEXT INDEX), we can use the mode RENAME_IGNORE_FK.
The mod RENAME_REBUILD is for any DDL operation that rebuilds the
table inside InnoDB, such as TRUNCATE and native ALTER TABLE
(or OPTIMIZE TABLE). The mode RENAME_ALTER_COPY is used solely
during non-native ALTER TABLE in ha_innobase::rename_table().
Normal ha_innobase::rename_table() will use the mode RENAME_FK.
CREATE OR REPLACE will rename the old table (if one exists) along
with its FOREIGN KEY constraints into a temporary name. The replacement
table will be initially created with another temporary name.
Unlike in ALTER TABLE, all FOREIGN KEY constraints must be renamed
and not inherited as part of these operations, using the mode RENAME_FK.
dict_get_referenced_table(): Let the callers convert names when needed.
create_table_info_t::create_foreign_keys(): CREATE OR REPLACE creates
the replacement table with a temporary name table, so for
self-references foreign->referenced_table will be a table with
temporary name and charset conversion must be skipped for it.
Reviewed by:
Michael Widenius <monty@mariadb.org>
