- FLUSH GLOBAL STATUS now resets most global_status_vars.
At this stage, this is mainly to be used for testing.
- FLUSH SESSION STATUS added as an alias for FLUSH STATUS.
- FLUSH STATUS does not require any privilege (before required RELOAD).
- FLUSH GLOBAL STATUS requires RELOAD privilege.
- All global status reset moved to FLUSH GLOBAL STATUS.
- Replication semisync status variables are now reset by
FLUSH GLOBAL STATUS.
- In test cases, the only changes are:
- Replace FLUSH STATUS with FLUSH GLOBAL STATUS
- Replace FLUSH STATUS with FLUSH STATUS; FLUSH GLOBAL STATUS.
This was only done in a few tests where the test was using SHOW STATUS
for both local and global variables.
- Uptime_since_flush_status is now always provided, independent if
ENABLED_PROFILING is enabled when compiling MariaDB.
- @@global.Uptime_since_flush_status is reset on FLUSH GLOBAL STATUS
and @@session.Uptime_since_flush_status is reset on FLUSH SESSION STATUS.
- When connected, @@session.Uptime_since_flush_status is set to 0.
Enable unusable key notes for non-equality predicates:
<, <=, =>, >, BETWEEN, IN, LIKE
Note, in some scenarios it displays duplicate notes, e.g.
for queries with ORDER BY:
SELECT * FROM t1
WHERE indexed_string_column >= 10
ORDER BY indexed_string_column
LIMIT 5;
This should be tolarable. Getting rid of the diplicate note
completely would need a much more complex patch, which is
not desiable in 10.6.
Details:
- Changing RANGE_OPT_PARAM::note_unusable_keys from bool
to a new data type Item_func::Bitmap, so the caller can
choose with a better granuality which predicates
should raise unusable key notes inside the range optimizer:
a. all predicates (=, <=>, <, <=, =>, >, BETWEEN, IN, LIKE)
b. all predicates except equality (=, <=>)
c. none of the predicates
"b." is needed because in some scenarios equality predicates (=, <=>)
send unusable key notes at an earlier stage, before the range optimizer,
during update_ref_and_keys(). Calling the range optimizer with
"all predicates" would produce duplicate notes for = and <=> in such cases.
- Fixing get_quick_record_count() to call the range optimizer
with "all predicates except equality" instead of "none of the predicates".
Before this change the range optimizer suppressed all notes for
non-equality predicates: <, <=, =>, >, BETWEEN, IN, LIKE.
This actually fixes the reported problem.
- Fixing JOIN::make_range_rowid_filters() to call the range optimizer
with "all predicates except equality" instead of "all predicates".
Before this change the range optimizer produced duplicate notes
for = and <=> during a rowid_filter optimization.
- Cleanup:
Adding the op_collation argument to Field::raise_note_cannot_use_key_part()
and displaying the operation collation rather than the argument collation
in the unusable key note. This is important for operations with more than
two arguments: BETWEEN and IN, e.g.:
SELECT * FROM t1
WHERE column_utf8mb3_general_ci
BETWEEN 'a' AND 'b' COLLATE utf8mb3_unicode_ci;
SELECT * FROM t1
WHERE column_utf8mb3_general_ci
IN ('a', 'b' COLLATE utf8mb3_unicode_ci);
The note for 'a' now prints utf8mb3_unicode_ci as the collation.
which is the collation of the entire operation:
Cannot use key key1 part[0] for lookup:
"`column_utf8mb3_general_ci`" of collation `utf8mb3_general_ci` >=
"'a'" of collation `utf8mb3_unicode_ci`
Before this change it printed the collation of 'a',
so the note was confusing:
Cannot use key key1 part[0] for lookup:
"`column_utf8mb3_general_ci`" of collation `utf8mb3_general_ci` >=
"'a'" of collation `utf8mb3_general_ci`"
INSERT IGNORE had a pecular undocumented case that when one row was
inserted, there was an error rather than a warning.
As LOAD DATA IGNORE, UPDATE IGNORE, INSERT IGNORE SELECT, and INSERT
IGNORE VALUES (single row, for foreign key violation) all behave the same
way with a warning lets keep the behaviour normalized.
In compatibility, previously a error was generated, now a warning is
generated.
This behaviour is now consistent with MySQL-8.0 too.
The problem was that we did not handle errors properly in
JOIN::get_best_combination. In case an early error, JOIN->join_tab would
contain unintialized values, which would cause errors on cleanup().
The error in question was reported earlier, but not noticed until later.
One cause of this is that most of the sql_select.cc code just checks
thd->fatal_error and not thd->is_error().
Fixed by changing of checks of fatal_error to is_error().
The problem is that the first execution of the prepared statement makes
a permanent optimization of converting the LEFT JOIN to an INNER JOIN.
This is based on the assumption that all the user parameters (?) are
always constants and that parameters to Item_cond() will not change value
from true and false between different executions.
(The example was using IS NULL, which will change value if parameter
depending on if the parameter is NULL or not).
The fix is to change Item_cond::fix_fields() and
Item_cond::eval_not_null_tables() to not threat user parameters as
constants. This will ensure that we don't do the LEFT_JOIN -> INNER
JOIN conversion that causes problems.
There is also some things that needs to be improved regarding
calculations of not_null_tables_cache as we get a different value for
WHERE 1 or t1.a=1
compared to
WHERE t1.a= or 1
Changes done:
- Mark Item_param with the PARAM flag to be able to quickly check
in Item_cond::eval_not_null_tables() if an item contains a
prepared statement parameter (just like we check for stored procedure
parameters).
- Fixed that Item_cond::not_null_tables_cache is not depending on
order of arguments.
- Don't call item->eval_const_cond() for items that are NOT on the top
level of the WHERE clause. This removed a lot of unnecessary
warnings in the test suite!
- Do not reset not_null_tables_cache for not top level items.
- Simplified Item_cond::fix_fields by calling eval_not_null_tables()
instead of having duplication of all the code in
eval_not_null_tables().
- Return an error if Item_cond::fix_field() generates an error
The old code did generate an error in some cases, but not in all
cases.
- Fixed all handling of the above error in make_cond_for_tables().
The error handling by the callers did not exists before which
could lead to asserts in many different places in the old code).
- All changes in sql_select.cc are just checking the return value of
fix_fields() and make_cond_for_tables() and returning an error
value if fix_fields() returns true or make_cond_for_tables()
returns NULL and is_error() is set.
- Mark Item_cond as const_item if all arguments returns true for
can_eval_in_optimize().
Reviewer: Sergei Petrunia <sergey@mariadb.com>
The main difference in code path between EQ_REF and REF is that for
REF we have to do an extra read_next on the index to check that there
is no more matching rows.
Before this patch we added a preference of EQ_REF by ensuring that REF
would always estimate to find at least 2 rows.
This patch adds the cost of the extra key read_next to REF access and
removes the code that limited REF to at least 2 rows. For some queries
this can have a big effect as the total estimated rows will be halved
for each REF table with 1 rows.
multi_range cost calculations are also changed to take into account
the difference between EQ_REF and REF.
The effect of the patch to the test suite:
- About 80 test case changed
- Almost all changes where for EXPLAIN where estimated rows for REF
where changed from 2 to 1.
- A few test cases using explain extended had a change of 'filtered'.
This is because of the estimated rows are now closer to the
calculated selectivity.
- A very few test had a change of table order.
This is because the change of estimated rows from 2 to 1 or the small
cost change for REF
(main.subselect_sj_jcl6, main.group_by, main.dervied_cond_pushdown,
main.distinct, main.join_nested, main.order_by, main.join_cache)
- No key statistics and the estimated rows are now smaller which cased
estimated filtering to be lower.
(main.subselect_sj_mat)
- The number of total rows are halved.
(main.derived_cond_pushdown)
- Plans with 1 row changed to use RANGE instead of REF.
(main.group_min_max)
- ALL changed to REF
(main.key_diff)
- Key changed from ref + index_only to PRIMARY key for InnoDB, as
OPTIMIZER_ROW_LOOKUP_COST + OPTIMIZER_ROW_NEXT_FIND_COST is smaller than
OPTIMIZER_KEY_LOOKUP_COST + OPTIMIZER_KEY_NEXT_FIND_COST.
(main.join_outer_innodb)
- Cost changes printouts
(main.opt_trace*)
- Result order change
(innodb_gis.rtree)
This was done after discussions with Igor, Sanja and Bar.
The main reason for removing the deprication was to ensure that MariaDB
is always backward compatible whenever possible.
Other things:
- Added statistics counters, mainly for the feedback plugin.
- INTO OUTFILE
- INTO variable
- If INTO is using the old syntax (end of query)
This includes all test changes from
"Changing all cost calculation to be given in milliseconds"
and forwards.
Some of the things that caused changes in the result files:
- As part of fixing tests, I added 'echo' to some comments to be able to
easier find out where things where wrong.
- MATERIALIZED has now a higher cost compared to X than before. Because
of this some MATERIALIZED types have changed to DEPENDEND SUBQUERY.
- Some test cases that required MATERIALIZED to repeat a bug was
changed by adding more rows to force MATERIALIZED to happen.
- 'Filtered' in SHOW EXPLAIN has in many case changed from 100.00 to
something smaller. This is because now filtered also takes into
account the smallest possible ref access and filters, even if they
where not used. Another reason for 'Filtered' being smaller is that
we now also take into account implicit filtering done for subqueries
using FIRSTMATCH.
(main.subselect_no_exists_to_in)
This is caluculated in best_access_path() and stored in records_out.
- Table orders has changed because more accurate costs.
- 'index' and 'ALL' for small tables has changed to use 'range' or
'ref' because of optimizer_scan_setup_cost.
- index can be changed to 'range' as 'range' optimizer assumes we don't
have to read the blocks from disk that range optimizer has already read.
This can be confusing in the case where there is no obvious where clause
but instead there is a hidden 'key_column > NULL' added by the optimizer.
(main.subselect_no_exists_to_in)
- Scan on primary clustered key does not report 'Using Index' anymore
(It's a table scan, not an index scan).
- For derived tables, the number of rows is now 100 instead of 2,
which can be seen in EXPLAIN.
- More tests have "Using index for group by" as the cost of this
optimization is now more correct (lower).
- A primary key could be preferred for a normal key, even if it would
access more rows, as it's faster to do 1 lokoup and 3 'index_next' on a
clustered primary key than one lookup trough a secondary.
(main.stat_tables_innodb)
Notes:
- There was a 4.7% more calls to best_extension_by_limited_search() in
the main.greedy_optimizer test. However examining the test results
it looked that the plans where slightly better (eq_ref where more
chained together) so I assume this is ok.
- I have verified a few test cases where there was notable/unexpected
changes in the plan and in all cases the new optimizer plans where
faster. (main.greedy_optimizer and some others)
Some tests drop the default mtr database "test". This may fail due
to the directory not being empty. InnoDB may not delete all tables
immediately, due to the "background drop table queue" or its
replacement in commit 1bd681c8b3
(the purge of history would clean up after a DDL operation during
which the server was killed).
Let us try to avoid "drop database test" whenever it is easily possible.
Where it is not, SET GLOBAL innodb_max_purge_lag_wait=0 will ensure
that the replacement of the "background drop table queue" will have
completed its job.
The problem is that if table definition cache (TDC) is full of real tables
which are in tables cache, view definition can not stay there so will be
removed by its own underlying tables.
In situation above old mechanism of detection matching definition in PS
and current version always require reprepare and so prevent executing
the PS.
One work around is to increase TDC, other - improve version check for
views/triggers (which is done here). Now in suspicious cases we check:
- timestamp (microseconds) of the view to be sure that version really
have changed;
- time (microseconds) of creation of a trigger related to time
(microseconds) of statement preparation.
