Adding the test for the length of lex->name into show_create_db().
Without this test writes beyond the end of db_name_buff were possible
upon a too long database name.
Two new variables added:
- max_tmp_space_usage : Limits the the temporary space allowance per user
- max_total_tmp_space_usage: Limits the temporary space allowance for
all users.
New status variables: tmp_space_used & max_tmp_space_used
New field in information_schema.process_list: TMP_SPACE_USED
The temporary space is counted for:
- All SQL level temporary files. This includes files for filesort,
transaction temporary space, analyze, binlog_stmt_cache etc.
It does not include engine internal temporary files used for repair,
alter table, index pre sorting etc.
- All internal on disk temporary tables created as part of resolving a
SELECT, multi-source update etc.
Special cases:
- When doing a commit, the last flush of the binlog_stmt_cache
will not cause an error even if the temporary space limit is exceeded.
This is to avoid giving errors on commit. This means that a user
can temporary go over the limit with up to binlog_stmt_cache_size.
Noteworthy issue:
- One has to be careful when using small values for max_tmp_space_limit
together with binary logging and with non transactional tables.
If a the binary log entry for the query is bigger than
binlog_stmt_cache_size and one hits the limit of max_tmp_space_limit
when flushing the entry to disk, the query will abort and the
binary log will not contain the last changes to the table.
This will also stop the slave!
This is also true for all Aria tables as Aria cannot do rollback
(except in case of crashes)!
One way to avoid it is to use @@binlog_format=statement for
queries that updates a lot of rows.
Implementation:
- All writes to temporary files or internal temporary tables, that
increases the file size, are routed through temp_file_size_cb_func()
which updates and checks the temp space usage.
- Most of the temporary file monitoring is done inside IO_CACHE.
Temporary file monitoring is done inside the Aria engine.
- MY_TRACK and MY_TRACK_WITH_LIMIT are new flags for ini_io_cache().
MY_TRACK means that we track the file usage. TRACK_WITH_LIMIT means
that we track the file usage and we give an error if the limit is
breached. This is used to not give an error on commit when
binlog_stmp_cache is flushed.
- global_tmp_space_used contains the total tmp space used so far.
This is needed quickly check against max_total_tmp_space_usage.
- Temporary space errors are using EE_LOCAL_TMP_SPACE_FULL and
handler errors are using HA_ERR_LOCAL_TMP_SPACE_FULL.
This is needed until we move general errors to it's own error space
so that they cannot conflict with system error numbers.
- Return value of my_chsize() and mysql_file_chsize() has changed
so that -1 is returned in the case my_chsize() could not decrease
the file size (very unlikely and will not happen on modern systems).
All calls to _chsize() are updated to check for > 0 as the error
condition.
- At the destruction of THD we check that THD::tmp_file_space == 0
- At server end we check that global_tmp_space_used == 0
- As a precaution against errors in the tmp_space_used code, one can set
max_tmp_space_usage and max_total_tmp_space_usage to 0 to disable
the tmp space quota errors.
- truncate_io_cache() function added.
- Aria tables using static or dynamic row length are registered in 8K
increments to avoid some calls to update_tmp_file_size().
Other things:
- Ensure that all handler errors are registered. Before, some engine
errors could be printed as "Unknown error".
- Fixed bug in filesort() that causes a assert if there was an error
when writing to the temporay file.
- Fixed that compute_window_func() now takes into account write errors.
- In case of parallel replication, rpl_group_info::cleanup_context()
could call trans_rollback() with thd->error set, which would cause
an assert. Fixed by resetting the error before calling trans_rollback().
- Fixed bug in subselect3.inc which caused following test to use
heap tables with low value for max_heap_table_size
- Fixed bug in sql_expression_cache where it did not overflow
heap table to Aria table.
- Added Max_tmp_disk_space_used to slow query log.
- Fixed some bugs in log_slow_innodb.test
Item_func_dyncol_create::print_arguments() printed only CHARSET clause
without COLLATE.
Therefore,
HEX(column_create(1,'1212' AS CHAR CHARACTER SET utf8mb3 COLLATE utf8mb3_bin))
inside a VIEW changed to just:
HEX(column_create(1,'1212' AS CHAR CHARACTER SET utf8mb3))
which changed the collation ID seen in the HEX output.
Note, the collation ID inside column_create() is not really much important.
(It's only important what the character set is).
And for COLLATE, the more important thing is what's later written
in the AS clause of COLUMN_GET:
SELECT
COLUMN_GET(
column_create(1,'1212' AS CHAR CHARACTER SET utf8mb3 COLLATE utf8mb3_bin)
column_nr AS type -- this type is more important
);
Still, let's add the COLLATE clause into the COLUMN_CREATE() print output,
although it's not important for now for anything else than just the HEX output.
At least to make VIEW work in a more predictable way with HEX(COLUMN_CREATE()).
Also, in the future we can start using somehow the collation ID written inside
COLUMN_CREATE(), for example by making the `AS type` clause optional in
COLUMN_GET():
COLUMN_GET(dyncol_blob, column_nr [AS type]);
instead of:
COLUMN_GET(dyncol_blob, column_nr AS type);
SQL Server compatibility layer may need this for
the SQL_Variant data type support.
MDEV-32441 SENT_ROWS shows random wrong values when stored function
is selected.
MDEV-32281 EXAMINED_ROWS is not populated in
information_schema.processlist upon SELECT.
Added ROWS_SENT to information_schema.processlist
This is to have the same information as Percona server (SENT_ROWS)
To ensure that information_schema.processlist has correct values for
sent_rows and examined_rows I introduced two new variables to hold the
total counts so far. This was needed as stored functions and stored
procedures will reset the normal counters to be able to count rows for
each statement individually for slow query log.
Other things:
- Selects with functions shows in processlist the total examined_rows
and sent_rows by the main statement and all functions.
- Stored procedures shows in processlist examined_rows and sent_rows
per stored procedure statement.
- Fixed some double accounting for sent_rows and examined_rows.
- HANDLER operations now also supports send_rows and examined_rows.
- Display sizes for MEMORY_USED, MAX_MEMORY_USED, EXAMINED_ROWS and
QUERY_ID in information_schema.processlist changed to 10 characters.
- EXAMINED_ROWS and SENT_ROWS changed to bigint.
- INSERT RETURNING and DELETE RETURNING now updates SENT_ROWS.
- As thd is always up to date with examined_rows, we do not need
to handle examined row counting for unions or filesort.
- I renamed SORT_INFO::examined_rows to m_examined_rows to ensure that
we don't get bugs in merges that tries to use examined_rows.
- Removed calls of type "thd->set_examined_row_count(0)" as they are
not needed anymore.
- Removed JOIN::join_examined_rows
- Removed not used functions:
THD::set_examined_row_count()
- Made inline some functions that where called for each row.
make TRANSACTIONAL table option behave similar to other engine-defined
table options. If the engine doesn't suport it:
* if specified expicitly in CREATE or ALTER - it's ER_UNKNOWN_OPTION
* an error or a warning depending on sql_mode IGNORE_BAD_TABLE_OPTIONS
* in ALTER TABLE from the engine that suppors it to the engine that
doesn't - silently preserved (no warning)
* it is commented out in SHOW CREATE unless IGNORE_BAD_TABLE_OPTIONS
regression from MDEV-29540 / 8c38939369.
INSERT SELECT errors needed to be unconditionally ignored.
As this touches the CREATE .. SELECT functionality, show
the equalivent test there.
- Added one neutral and 22 tailored (language specific) collations based on
Unicode Collation Algorithm version 14.0.0.
Collations were added for Unicode character sets
utf8mb3, utf8mb4, ucs2, utf16, utf32.
Every tailoring was added with four accent and case
sensitivity flag combinations, e.g:
* utf8mb4_uca1400_swedish_as_cs
* utf8mb4_uca1400_swedish_as_ci
* utf8mb4_uca1400_swedish_ai_cs
* utf8mb4_uca1400_swedish_ai_ci
and their _nopad_ variants:
* utf8mb4_uca1400_swedish_nopad_as_cs
* utf8mb4_uca1400_swedish_nopad_as_ci
* utf8mb4_uca1400_swedish_nopad_ai_cs
* utf8mb4_uca1400_swedish_nopad_ai_ci
- Introducing a conception of contextually typed named collations:
CREATE DATABASE db1 CHARACTER SET utf8mb4;
CREATE TABLE db1.t1 (a CHAR(10) COLLATE uca1400_as_ci);
The idea is that there is no a need to specify the character set prefix
in the new collation names. It's enough to type just the suffix
"uca1400_as_ci". The character set is taken from the context.
In the above example script the context character set is utf8mb4.
So the CREATE TABLE will make a column with the collation
utf8mb4_uca1400_as_ci.
Short collations names can be used in any parts of the SQL syntax
where the COLLATE clause is understood.
- New collations are displayed only one time
(without character set combinations) by these statements:
SELECT * FROM INFORMATION_SCHEMA.COLLATIONS;
SHOW COLLATION;
For example, all these collations:
- utf8mb3_uca1400_swedish_as_ci
- utf8mb4_uca1400_swedish_as_ci
- ucs2_uca1400_swedish_as_ci
- utf16_uca1400_swedish_as_ci
- utf32_uca1400_swedish_as_ci
have just one entry in INFORMATION_SCHEMA.COLLATIONS and SHOW COLLATION,
with COLLATION_NAME equal to "uca1400_swedish_as_ci", which is the suffix
without the character set name:
SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.COLLATIONS
WHERE COLLATION_NAME LIKE '%uca1400_swedish_as_ci';
+-----------------------+
| COLLATION_NAME |
+-----------------------+
| uca1400_swedish_as_ci |
+-----------------------+
Note, the behaviour of old collations did not change.
Non-unicode collations (e.g. latin1_swedish_ci) and
old UCA-4.0.0 collations (e.g. utf8mb4_unicode_ci)
are still displayed with the character set prefix, as before.
- The structure of the table INFORMATION_SCHEMA.COLLATIONS was changed.
The NOT NULL constraint was removed from these columns:
- CHARACTER_SET_NAME
- ID
- IS_DEFAULT
and from the corresponding columns in SHOW COLLATION.
For example:
SELECT COLLATION_NAME, CHARACTER_SET_NAME, ID, IS_DEFAULT
FROM INFORMATION_SCHEMA.COLLATIONS
WHERE COLLATION_NAME LIKE '%uca1400_swedish_as_ci';
+-----------------------+--------------------+------+------------+
| COLLATION_NAME | CHARACTER_SET_NAME | ID | IS_DEFAULT |
+-----------------------+--------------------+------+------------+
| uca1400_swedish_as_ci | NULL | NULL | NULL |
+-----------------------+--------------------+------+------------+
The NULL value in these columns now means that the collation
is applicable to multiple character sets.
The behavioir of old collations did not change.
Make sure your client programs can handle NULL values in these columns.
- The structure of the table
INFORMATION_SCHEMA.COLLATION_CHARACTER_SET_APPLICABILITY was changed.
Three new NOT NULL columns were added:
- FULL_COLLATION_NAME
- ID
- IS_DEFAULT
New collations have multiple entries in COLLATION_CHARACTER_SET_APPLICABILITY.
The column COLLATION_NAME contains the collation name without the character
set prefix. The column FULL_COLLATION_NAME contains the collation name with
the character set prefix.
Old collations have full collation name in both FULL_COLLATION_NAME and
COLLATION_NAME.
SELECT COLLATION_NAME, FULL_COLLATION_NAME, CHARACTER_SET_NAME, ID, IS_DEFAULT
FROM INFORMATION_SCHEMA.COLLATION_CHARACTER_SET_APPLICABILITY
WHERE FULL_COLLATION_NAME RLIKE '^(utf8mb4|latin1).*swedish.*ci$';
+-----------------------------+-------------------------------------+--------------------+------+------------+
| COLLATION_NAME | FULL_COLLATION_NAME | CHARACTER_SET_NAME | ID | IS_DEFAULT |
+-----------------------------+-------------------------------------+--------------------+------+------------+
| latin1_swedish_ci | latin1_swedish_ci | latin1 | 8 | Yes |
| latin1_swedish_nopad_ci | latin1_swedish_nopad_ci | latin1 | 1032 | |
| utf8mb4_swedish_ci | utf8mb4_swedish_ci | utf8mb4 | 232 | |
| uca1400_swedish_ai_ci | utf8mb4_uca1400_swedish_ai_ci | utf8mb4 | 2368 | |
| uca1400_swedish_as_ci | utf8mb4_uca1400_swedish_as_ci | utf8mb4 | 2370 | |
| uca1400_swedish_nopad_ai_ci | utf8mb4_uca1400_swedish_nopad_ai_ci | utf8mb4 | 2372 | |
| uca1400_swedish_nopad_as_ci | utf8mb4_uca1400_swedish_nopad_as_ci | utf8mb4 | 2374 | |
+-----------------------------+-------------------------------------+--------------------+------+------------+
- Other INFORMATION_SCHEMA queries:
SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.COLUMNS;
SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.PARAMETERS;
SELECT TABLE_COLLATION FROM INFORMATION_SCHEMA.TABLES;
SELECT DEFAULT_COLLATION_NAME FROM INFORMATION_SCHEMA.SCHEMATA;
SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.ROUTINES;
SELECT COLLATION_CONNECTION FROM INFORMATION_SCHEMA.EVENTS;
SELECT DATABASE_COLLATION FROM INFORMATION_SCHEMA.EVENTS;
SELECT COLLATION_CONNECTION FROM INFORMATION_SCHEMA.ROUTINES;
SELECT DATABASE_COLLATION FROM INFORMATION_SCHEMA.ROUTINES;
SELECT COLLATION_CONNECTION FROM INFORMATION_SCHEMA.TRIGGERS;
SELECT DATABASE_COLLATION FROM INFORMATION_SCHEMA.TRIGGERS;
SELECT COLLATION_CONNECTION FROM INFORMATION_SCHEMA.VIEWS;
display full collation names, including character sets prefix,
for all collations, including new collations.
Corresponding SHOW commands also display full collation names
in collation related columns:
SHOW CREATE TABLE t1;
SHOW CREATE DATABASE db1;
SHOW TABLE STATUS;
SHOW CREATE FUNCTION f1;
SHOW CREATE PROCEDURE p1;
SHOW CREATE EVENT ev1;
SHOW CREATE TRIGGER tr1;
SHOW CREATE VIEW;
These INFORMATION_SCHEMA queries and SHOW statements may change in
the future, to display show collation names.
The 10.5 version of the patch.
Removing DEFAULT from INFORMATION_SCHEMA columns.
DEFAULT in read-only tables is rather meaningless.
Upgrade should go smoothly.
Also fixes:
MDEV-20254 Problems with EMPTY_STRING_IS_NULL and I_S tables
Removing DEFAULT from INFORMATION_SCHEMA columns.
DEFAULT in read-only tables is rather meaningless.
Upgrade should go smoothly.
Also fixes:
MDEV-20254 Problems with EMPTY_STRING_IS_NULL and I_S tables
This patch changes the main name of 3 byte character set from utf8 to
utf8mb3. New old_mode UTF8_IS_UTF8MB3 is added and set TRUE by default,
so that utf8 would mean utf8mb3. If not set, utf8 would mean utf8mb4.
This feature adds the functionality of ignorability for indexes.
Indexes are not ignored be default.
To control index ignorability explicitly for a new index,
use IGNORE or NOT IGNORE as part of the index definition for
CREATE TABLE, CREATE INDEX, or ALTER TABLE.
Primary keys (explicit or implicit) cannot be made ignorable.
The table INFORMATION_SCHEMA.STATISTICS get a new column named IGNORED that
would store whether an index needs to be ignored or not.
failed or late ER_PERIOD_FIELD_WRONG_ATTRIBUTES upon attempt to create
existing table
Analysis: Error state is not stored when field is checked in
Table_period_info::check_field()
Fix: Store error state by setting res to true.
- IF EXISTS ends with a list of all not existing object, instead of a
separate note for every not existing object
- Produce a "Note" for all wrongly dropped objects
(like trying to do DROP SEQUENCE for a normal table)
- Do not write existing tables that could not be dropped to binlog
Other things:
MDEV-22820 Bogus "Unknown table" warnings produced upon attempt to drop
parent table referenced by FK
This was caused by an older version of this commit patch and later fixed
MDEV-22199 Add VISIBLE attribute for indexes in CREATE TABLE
This was done to make it easier to read in dumps from MySQL 8.0 generated
with MySQL workbench
Remove usage of deprecated variable storage_engine. It was deprecated in 5.5 but
it never issued a deprecation warning. Make it issue a warning in 10.5.1.
Replaced with default_storage_engine.
