The patch for MDEV-15530 incorrectly added a column in the middle of SHOW
SLAVE STATUS output. This is wrong, as it breaks backwards compatibility
with existing applications and scripts. In this case, it even broke
mariadb-dump, which is included in the server source tree!
Revert the incorrect change, putting the new Replicate_Rewrite_DB at the end
of SHOW SLAVE STATUS output.
Add a testcase for the mariadb-dump --dump-slave wrong output problem. Also
add a testcase rpl.rpl_show_slave_status to hopefully prevent any future
incorrect additions to SHOW SLAVE STATUS.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
New tests display additional information about characters from the BMP range:
- A summary with a COUNT(*) for all distinct combinations of properties
telling how the "=" and the "LIKE" predicates compare characters to their
LOWER() and UPPER() variants.
- A detailed list of trciky characters
for which the "=" and the "LIKE" predicates compare
LOWER(c)/UPPER(c) variants as not equal to just "c".
Tricky characters include:
- Turkish letters: ı - small dotless letter i
- Croatian letters: precombined contractions for Dž, Dz, Lj, Nj
- Units of measurement: Ω,K,Å (Ohm, Kelvin, Angstrom)
These ones look very similar to Greek letter Omega,
Latin letter Kra, Swedish/Finnish letter A with a ring above.
If mariabackup with backup locks is used on SST we do not
pause and desync galera provider at all. If WSREP_MODE_BF_MARIABACKUP
case provider is paused and desync at BLOCK_COMMIT phase. In
other cases provider is paused and desync at BLOCK_DDL phase.
Added support to BACKUP STAGE to maria-backup
This is a port of the code from ES 10.6
See MDEV-5336 for backup stages description.
The following old options are not supported by the new code:
--rsync ; This is because rsync will not work on tables
that are in used.
--no-backup-locks ; This is disabled as mariadb-backup will always
use backup locks for better performance.
This reverts commit c37b2087b4.
In c37b20887, when re-binlogging a GTID event on a replica,
it will overwrite the thread_id from the primary to be the
value of the slave applier (SQL thread or parallel worker).
This should be the value of the original thread_id on the
master connection though, to both help track temporary
tables, and be consistent with Query_log_event.
Reverting the commit to re-target 11.5, so we can re-test
with the corrected thread_id.
enable ssl + ssl_verify_server_cert in the internal client too
* fix replication tests to disable master_ssl_verify_server_cert
because accounts are passwordless - except rpl.rpl_ssl1
* fix federated/federatedx/connect to disable SSL_VERIFY_SERVER_CERT
because they cannot configure an ssl connection
* fix spider to disable ssl_verify_server_cert, if configuration
says so, as spider _can_ configure an ssl connection
* memory leak in embedded test-connect
not default_mysqld.cnf. The latter has only server settings,
it misses mtr-specific client configuration
Except for spider, that doesn't use mysqld.1 server
and default_my.cnf starts it automatically.
Spider tests have to include both default_mysqld.cnf and
default_client.cnf
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
to SQL error plugin
New plugin variable "with_db_and_thread_info" is added which prints the
thread id and databse name to the logfile. the value is stored in variable
"with_db_and_thread_info"
log_sql_errors() is responsible for printing in the log. If detailed is
enabled, print thread id and database name both, otherwise skip it.
This patch augments Gtid_log_event with the user thread-id.
In particular that compensates for the loss of this info in
Rows_log_events.
Gtid_log_event::thread_id gets visible in mysqlbinlog output like
#231025 16:21:45 server id 1 end_log_pos 537 CRC32 0x1cf1d963 GTID 0-1-2 ddl thread_id=10
as 64 bit unsigned integer.
While the size of Gtid event has grown by 8-9 bytes
replication from OLD <-> NEW is not affected by it.
This work was started by the late Sujatha Sivakumar.
Brandon Nesterenko took it over, reviewed initial patches and extended
the work.
Reviewed-by: <andrei.elkin@mariadb.com>
The problem is the test is skipped after sourcing include/master-slave.inc.
This leaves the slave threads running after the test is skipped, causing a
following test to fail during rpl setup.
Also rename have_normal_bzip.inc to the more appropriate _zlib.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This commit fixes GTID inconsistency which was injected by mariabackup SST.
Donor node now writes new info file: donor_galera_info, which is streamed
along the mariabackup donation to the joiner node. The donor_galera_info
file contains both GTID and gtid domain_id, and joiner will use these to
initialize the GTID state.
Commit has new mtr test case: galera_3nodes.galera_gtid_consistency, which
exercises potentially harmful mariabackup SST scenarios. The test has also
scenario with IST joining.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
InnoDB could return off-by-1 estimates for the involved tables.
This would cause off-by-many difference in join output cardinality
for the top-level SELECT, and so different query plan for the subquery.
The fix: Introduce mysql-test/include/innodb_stable_estimates.{inc,opt}
which disables InnoDB's background statistics collection, and use it.
Fix some random test failures following MDEV-32168 push.
Don't blindly set $rpl_only_running_threads in many places. Instead explicit
stop only the IO or SQL thread, as appropriate. Setting it interfered with
rpl_end.inc in some cases. Rather than clearing it afterwards, better to
not set it at all when it is not needed, removing ambiguity in the test
about the state of the replication threads.
Don't fail the test if include/stop_slave_io.inc finds an error in the IO
thread after stop. Such errors can be simply because slave stop happened in
the middle of the IO thread's initial communication with the master.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
