Subselect_single_value_engine cannot handle table value constructor used as
subquery. That's why any table value constructor TVC used as subquery is
converted into a select over derived table whose specification is TVC.
Currently the names of the columns of the derived table DT are taken from
the first element of TVC and if the k-th component of the element happens
to be a subquery the text representation of this subquery serves as the
name of the k-th column of the derived table. References of all columns of
the derived table DT compose the select list of the result of the conversion.
If a definition of a view contained a table value constructor used as a
subquery and the view was registered after this conversion had been
applied we could register an invalid view definition if the first element
of TVC contained a subquery as its component: the name of this component
was taken from the original subquery, while the name of the corresponding
column of the derived table was taken from the text representation of the
subquery produced by the function SELECT_LEX::print() and these names were
usually differ from each other.
To avoid registration of such invalid views the function SELECT_LEX::print()
now prints the original TVC instead of the select in which this TVC has
been wrapped. Now the specification of registered view looks like as if no
conversions from TVC to selects were done.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
1. In case of system-versioned table add row_end into FTS_DOC_ID index
in fts_create_common_tables() and innobase_create_key_defs().
fts_n_uniq() returns 1 or 2 depending on whether the table is
system-versioned.
After this patch recreate of FTS_DOC_ID index is required for
existing system-versioned tables. If you see this message in error
log or server warnings: "InnoDB: Table db/t1 contains 2 indexes
inside InnoDB, which is different from the number of indexes 1
defined in the MariaDB" use this command to fix the table:
ALTER TABLE db.t1 FORCE;
2. Fix duplicate history for secondary unique index like it was done
in MDEV-23644 for clustered index (932ec586aad). In case of
existing history row which conflicts with currently inseted row we
check in row_ins_scan_sec_index_for_duplicate() whether that row
was inserted as part of current transaction. In that case we
indicate with DB_FOREIGN_DUPLICATE_KEY that new history row is not
needed and should be silently skipped.
3. Some parts of MDEV-21138 (7410ff436e9) reverted. Skipping of
FTS_DOC_ID index for history rows made problems with purge
system. Now this is fixed differently by p.2.
4. wait_all_purged.inc checks that we didn't affect non-history rows
so they are deleted and purged correctly.
Additional FTS fixes
fts_init_get_doc_id(): exclude history rows from max_doc_id
calculation. fts_init_get_doc_id() callback is used only for crash
recovery.
fts_add_doc_by_id(): set max value for row_end field.
fts_read_stopword(): stopwords table can be system-versioned too. We
now read stopwords only for current data.
row_insert_for_mysql(): exclude history rows from doc_id validation.
row_merge_read_clustered_index(): exclude history_rows from doc_id
processing.
fts_load_user_stopword(): for versioned table retrieve row_end field
and skip history rows. For non-versioned table we retrieve 'value'
field twice (just for uniformity).
FTS tests for System Versioning now include maybe_versioning.inc which
adds 3 combinations:
'vers' for debug build sets sysvers_force and
sysvers_hide. sysvers_force makes every created table
system-versioned, sysvers_hide hides WITH SYSTEM VERSIONING
for SHOW CREATE.
Note: basic.test, stopword.test and versioning.test do not
require debug for 'vers' combination. This is controlled by
$modify_create_table in maybe_versioning.inc and these
tests run WITH SYSTEM VERSIONING explicitly which allows to
test 'vers' combination on non-debug builds.
'vers_trx' like 'vers' sets sysvers_force_trx and sysvers_hide. That
tests FTS with trx_id-based System Versioning.
'orig' works like before: no System Versioning is added, no debug is
required.
Upgrade/downgrade test for System Versioning is done by
innodb_fts.versioning. It has 2 combinations:
'prepare' makes binaries in std_data (requires old server and OLD_BINDIR).
It tests upgrade/downgrade against old server as well.
'upgrade' tests upgrade against binaries in std_data.
Cleanups:
Removed innodb-fts-stopword.test as it duplicates stopword.test
=========== Problem =============
- `show columns` is not working for temporary tables, even though there
is enough privilege `create temporary tables`.
=========== Solution =============
- Append `TMP_TABLE_ACLS` privilege when running `show columns` for temp
tables.
- Additionally `check_access()` for database only once, not for each
field
=========== Additionally =============
- Update comments for function `check_table_access` arguments
Reviewed by: <vicentiu@mariadb.org>
The problem is that if table definition cache (TDC) is full of real tables
which are in tables cache, view definition can not stay there so will be
removed by its own underlying tables.
In situation above old mechanism of detection matching definition in PS
and current version always require reprepare and so prevent executing
the PS.
One work around is to increase TDC, other - improve version check for
views/triggers (which is done here). Now in suspicious cases we check:
- timestamp (microseconds) of the view to be sure that version really
have changed;
- time (microseconds) of creation of a trigger related to time
(microseconds) of statement preparation.
- Added missing information about database of corresponding table for various types of commands
- Update some typos
- Reviewed by: <vicentiu@mariadb.org>
- Commit c8948b0d0db4 introduced `get_one_variable()` - updating missing argument.
- Remove caller setting of empty string in `rpl_filter`, since underlying functions will do the same
(commit 9584cbe7fcc4 introduced).
Reviewed by: <brandon.nesterenko@mariadb.com>
`m_status == DA_ERROR' failed on SELECT after setting tmp_disk_table_size.
Analysis: Mismatch in number of warnings between "194 warnings" vs
"64 rows in set" is because of max_error_count variable which has default
value of 64.
About the corrupted tables, the error that occurs because of insufficient
tmp_disk_table_size variable is not reported correctly and we continue to
execute the statement. But because the previous error (about table being
full)is not reported correctly, this error moves up the stack and is
wrongly reported as parsing error later on while parsing frm file of one
of the information schema table. This parsing error gives corrupted table
error.
As for the innodb error, it occurs even when tmp_disk_table_size is not
insufficient is default but the internal error handler takes care of it
and the error doesn't show. But when tmp_disk_table_size is insufficient,
the fatal error which wasn't reported correctly moves up the stack so
internal error handler is not called. So it shows errors.
Fix: Report the error correctly.
Problem:
DECIMAL columns in I_S must be explicitly set of some value.
I_S columns do not have `DEFAULT 0` (after MDEV-18918), so during
restore_record() their record fragments pointed by Field::ptr are
initialized to zero bytes 0x00.
But an array of 0x00's is not a valid binary DECIMAL value.
So val_decimal() called for such Field_new_decimal generated a warning
when seeing a wrong binary encoded DECIMAL value in the record.
Fix:
Explicitly setting INFORMATION_SCHEMA.PROCESSLIST.PROGRESS
to the decimal value of 0 if no progress information is available.
There were two independent problems which lead to the crash
and to the non-relevant records returned in I_S queries:
- The code in the I_S implementation was not secure
about values with 0x00 bytes.
It's fixed by using check_db_name() and check_table_name()
inside make_table_name_list(), and by adding the test for
0x00 inside check_table_name().
- The code in Item_string::print() did not convert
strings without introducers when restoring
the CREATE VIEW statement from an Item tree.
This made wrong literals inside the "query" line in the view FRM file
in cases when the VIEW parse time
character_set_client!=character_set_connection.
That's fixed by adding a proper conversion.
This change also fixed a similar problem in SHOW PROCEDURE CODE -
the literals were displayed in wrong character set in SP instructions
in cases when the SP parse time
character_set_client!=character_set_connection.
This is important since Sys_var_typelib and its descendants return
pointers to constant symbols from *_value_ptr, which are situated in
write-protected-memory.
* functions const-qualified:
- value_ptr
- session_value_ptr
- global_value_ptr
- default_value_ptr
- Sys_var_vers_asof::value_ptr
- other minor private ones
* remove C-style typecasts when it discards qualifiers
C:\projects\server\sql\sql_show.cc(7913): error C2220: warning treated as error - no 'object' file generated [C:\projects\server\win_build\sql\sql.vcxproj]
C:\projects\server\sql\sql_show.cc(7913): warning C4267: 'initializing': conversion from 'size_t' to 'uint', possible loss of data [C:\projects\server\win_build\sql\sql.vcxproj]
caused by 768c51880a5aa6d25d4c0fe7de7a88561ff46422
Add KEYWORDS table and SQL_FUNCTIONS table to INFORMATION_SCHEMA.
This commits needs some minor changes when propagated upwards
(e.g. func_array in item_create.cc has a termination element that
doesn't exist in later versions of MariaDB)
When you only need view structure, don't call handle_derived with
DT_CREATE and rely on its internal hackish check to skip DT_CREATE.
Because handle_derived is called from many different places,
and this internal hackish check is indiscriminative.
Instead, just don't ask handle_derived to do DT_CREATE
if you don't want it to do DT_CREATE.
