In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_servers.cc
Text conflict in sql/sql_update.cc
Text conflict in support-files/mysql.spec.sh
Problem: When RAND() is binlogged in statement mode, the seed is
binlogged too, so the replication slave generates the same
sequence of random numbers. This makes replication work in many
cases, but not in all cases: the order of rows is not guaranteed
for, e.g., UPDATE or INSERT...SELECT statements, so the row data
will be different if master and slave retrieve the rows in
different orders.
Fix: Mark RAND() as unsafe. It will generate a warning if
binlog_format=STATEMENT and switch to row-logging if
binlog_format=ROW.
For tables with metadata sizes ranging from 251 to 255 the size
of the event data (m_data_size) was being improperly calculated
in the Table_map_log_event constructor. This was due to the fact
that when writing the Table_map_log_event body (in
Table_map_log_event::write_data_body) a call to net_store_length
is made for packing the m_field_metadata_size. It happens that
net_store_length uses *one* byte for storing
m_field_metadata_size when it is smaller than 251 but *three*
bytes when it exceeds that value. BUG 42749 had already
pinpointed and fix this fact, but the fix was incomplete, as the
calculation in the Table_map_log_event constructor considers 255
instead of 251 as the threshold to increment m_data_size by
three. Thence, the window for having a mismatch between the
number of bytes written and the number of bytes accounted in the
event length (m_data_size) was left open for
m_field_metadata_size values between 251 and 255.
We fix this by changing the condition in the Table_map_log_event
constructor to match the one in the net_store_length, ie,
increment one byte if m_field_metadata_size < 251 and three if it
exceeds this value.
escaped field names
When in mixed or statement mode, the master logs LOAD DATA
queries by resorting to an Execute_load_query_log_event. This
event does not contain the original query, but a rewritten
version of it, which includes the table field names. However, the
rewrite does not escape the field names. If these names match a
reserved keyword, then the slave will stop with a syntax error
when executing the event.
We fix this by escaping the fields names as it happens already
for the table name.
This patch fixes three bugs as follows. First, aborting the server while purging
binary logs might generate orphan files due to how the purge operation was
implemented:
(purge routine - sql/log.cc - MYSQL_BIN_LOG::purge_logs)
1 - register the files to be removed in a temporary buffer.
2 - update the log-bin.index.
3 - flush the log-bin.index.
4 - erase the files whose names where register in the temporary buffer
in step 1.
Thus a failure while executing step 4 would generate an orphan file. Second,
a similar issue might happen while creating a new binary as follows:
(create routine - sql/log.cc - MYSQL_BIN_LOG::open)
1 - open the new log-bin.
2 - update the log-bin.index.
Thus a failure while executing step 1 would generate an orphan file.
To fix these issues, we record the files to be purged or created before really
removing or adding them. So if a failure happens such records can be used to
automatically remove dangling files. The new steps might be outlined as follows:
(purge routine - sql/log.cc - MYSQL_BIN_LOG::purge_logs)
1 - register the files to be removed in the log-bin.~rec~ placed in
the data directory.
2 - update the log-bin.index.
3 - flush the log-bin.index.
4 - delete the log-bin.~rec~.
(create routine - sql/log.cc - MYSQL_BIN_LOG::open)
1 - register the file to be created in the log-bin.~rec~
placed in the data directory.
2 - open the new log-bin.
3 - update the log-bin.index.
4 - delete the log-bin.~rec~.
(recovery routine - sql/log.cc - MYSQL_BIN_LOG::open_index_file)
1 - open the log-bin.index.
2 - open the log-bin.~rec~.
3 - for each file in log-bin.~rec~.
3.1 Check if the file is in the log-bin.index and if so ignore it.
3.2 Otherwise, delete it.
The third issue can be described as follows. The purge operation was allowing
to remove a file in use thus leading to the loss of data and possible
inconsistencies between the master and slave. Roughly, the routine was only
taking into account the dump threads and so if a slave was not connect the
file might be delete even though it was in use.
Problem: Some system functions that could return different values on
master and slave were not marked unsafe. In particular:
GET_LOCK
IS_FREE_LOCK
IS_USED_LOCK
MASTER_POS_WAIT
RELEASE_LOCK
SLEEP
SYSDATE
VERSION
Fix: Mark these functions unsafe.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
file
Issuing 'FLUSH LOGS' does not close and reopen indexfile.
Instead a SEEK_SET is performed.
This patch makes index file to be closed and reopened whenever a
rotation happens (FLUSH LOGS is issued or binary log exceeds
maximum configured size).
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running
server.
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will
not be overrided by the server_id stored in the 'format description BINLOG statement'.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- N be a statement that accesses and changes only N-tables.
- T be a statement that accesses and changes only T-tables.
In RBR, changes to N-tables that happen early in a transaction are not immediately flushed
upon committing a statement. This behavior may, however, break consistency in the presence
of concurrency since changes done to N-tables become immediately visible to other
connections. To fix this problem, we do the following:
. B N N T C would log - B N C B N C B T C.
. B N N T R would log - B N C B N C B T R.
Note that we are not preserving history from the master as we are introducing a commit that
never happened. However, this seems to be more acceptable than the possibility of breaking
consistency in the presence of concurrency.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- M be a mixed statement, i.e. a statement that updates both T and N.
- M* be a mixed statement that fails while updating either T or N.
This patch restore the behavior presented in 5.1.37 for rows either produced in
the RBR or MIXED modes, when a M* statement that happened early in a transaction
had their changes written to the binary log outside the boundaries of the
transaction and wrapped in a BEGIN/ROLLBACK. This was done to keep the slave
consistent with with the master as the rollback would keep the changes on N and
undo them on T. In particular, we do what follows:
. B M* T C would log - B M* R B T C.
Note that, we are not preserving history from the master as we are introducing a
rollback that never happened. However, this seems to be more acceptable than
making the slave diverge. We do not fix the following case:
. B T M* C would log B T M* C.
The slave will diverge as the changes on T tables that originated from the M
statement are rolled back on the master but not on the slave. Unfortunately, we
cannot simply rollback the transaction as this would undo any uncommitted
changes on T tables.
SBR is not considered in this patch because a failing statement is written to
the binary along with the error code and a slave executes and then rolls back
the statement when it has an associated error code, thus undoing the effects
on T. In RBR and MBR, a full-fledged fix will be pushed after the WL 2687.
CHANGE MASTER TO command required the value for RELAY_LOG_FILE to
be an absolute path, which was different from the requirement of
MASTER_LOG_FILE.
This patch fixed the problem by changing the value for RELAY_LOG_FILE
to be the basename of the log file as that for MASTER_LOG_FILE.
The 'BEGIN/COMMIT/ROLLBACK' log event could be filtered out if the
database is not selected by --database option of mysqlbinlog command.
This can result in problem if there are some statements in the
transaction are not filtered out.
To fix the problem, mysqlbinlog will output 'BEGIN/ROLLBACK/COMMIT'
in regardless of the database filtering rules.
beyond unsigned long.
BUG#44779: binlog.binlog_max_extension may be causing failure on
next test in PB
NOTE1: this is the backport to next-mr.
NOTE2: already includes patch for BUG#44779.
Binlog file extensions would turn into negative numbers once the
variable used to hold the value reached maximum for signed
long. Consequently, incrementing value to the next (negative) number
would lead to .000000 extension, causing the server to fail.
This patch addresses this issue by not allowing negative extensions
and by returning an error on find_uniq_filename, when the limit is
reached. Additionally, warnings are printed to the error log when the
limit is approaching. FLUSH LOGS will also report warnings to the
user, if the extension number has reached the limit. The limit has been
set to 0x7FFFFFFF as the maximum.
"load data" statements were written to the binlog as a mix of the original statement
and bits recreated from parse-info. This relied on implementation details and broke
with IGNORE_SPACES and versioned comments.
We now completely resynthesize the query for LOAD DATA for binlog (which among other
things normalizes them somewhat with regard to case, spaces, etc.).
We have already parsed the query properly, so we make use of that rather
than mix-and-match string literals and parsed items.
This should make us safe with regard to versioned comments, even those
spanning multiple tokens. Also no longer affected by IGNORE_SPACES.
In RBR, 'DROP TEMPORARY TABLE IF EXISTS...' statement is binlogged when the table
does not exist.
In fact, 'DROP TEMPORARY TABLE ...' statement should never be binlogged in RBR
no matter if the table exists or not.
This patch addresses this by checking whether we are dropping a
temporary table or not, when building the custom drop statement.
binlog-db-db / binlog-ignore-db
InnoDB will return an error if statement based replication is used
along with transaction isolation level READ-COMMITTED (or weaker),
even if the statement in question is filtered out according to the
binlog-do-db rules set. In this case, an error should not be printed.
This patch addresses this issue by extending the existing check in
external_lock to take into account the filter rules before deciding to
print an error. Furthermore, it also changes decide_logging_format to
take into consideration whether the statement is filtered out from
binlog before decision is made.
When setting AUTOCOMMIT=1 after starting a transaction, the binary log
did not commit the outstanding transaction. The reason was that the binary
log commit function saw the values of the new settings, deciding that there
were nothing to commit.
Fixed the problem by moving the implicit commit to before the thread option
flags were changed, so that the binary log sees the old values of the flags
instead of the values they will take after the statement.
