Revert the old patch revid:monty@askmonty.org-20100325133339-7mkel6valai0b4lb
This patch caused the InnoDB part of the transaction to not be marked
read-write in some cases, which messes up XA commit (and likely other
stuff as well).
mysql_tzinfo_to_sql tries to set wsrep_replicate_myisam
as SESSION variable, while its a GLOBAL-only system variable,
and thus the resulting sql would fail to load.
Fixed by changing the scope to GLOBAL in the SET command.
Also added following include files to facilitate testing :
* include/have_wsrep.inc
* include/not_wsrep.inc
* include/have_wsrep_enabled.inc
mysql_upgrade --help now also prints out --default options and variable values.
mysql_upgrade now prints permission errors.
mysql_upgrade doesn't print some non essential info if --silent is used.
Added handler error message about incompatible versions
Fixed that mysqlbug and mysql_install_db have the executable flag set.
Removed executable flag for some non executable files.
Changed in mysql_install_db askmonty.org to mariadb.com.
Ensured that all client executables prints --default options the same way.
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible.
Extended shown error for storage engine messages.
client/mysql.cc:
print_defaults() should be first (as in all other programs)
client/mysql_upgrade.c:
--help now also prints out --default options and variable values
Print out error if wrong permissions
Don't print info if --silent
client/mysqladmin.cc:
print_defaults() should be first (as in all other programs)
client/mysqlbinlog.cc:
Added print_defaults() to --help
client/mysqlcheck.c:
Added empty line in --help
client/mysqlimport.c:
Added empty line in --help
client/mysqlshow.c:
Made --help compatible
client/mysqlslap.c:
Made --help compatible
client/mysqltest.cc:
Added print_defaults() to --help
include/handler_ername.h:
Added handler error message
include/my_base.h:
Added handler error message
mysql-test/r/mysql_upgrade.result:
Updated results
mysql-test/r/repair.result:
Added test case for better error messages
mysql-test/std_data/host_old.MYD:
Added test case for better error messages
mysql-test/std_data/host_old.MYI:
Added test case for better error messages
mysql-test/std_data/host_old.frm:
Added test case for better error messages
mysql-test/t/repair.test:
Added test case for better error messages
mysys/my_handler_errors.h:
Added handler error message
scripts/CMakeLists.txt:
Fixed that mysqlbug and mysql_install_db have the executable flag set
scripts/mysql_install_db.sh:
askmonty.org -> mariadb.com
sql/ha_partition.cc:
Sometimes table_type() can be called for errors even if partition didn't manage to open any files
sql/handler.cc:
Write clear text for not handled, but defined error messages.
sql/share/errmsg-utf8.txt:
Extended shown error for storage engine messages
sql/sql_admin.cc:
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible
storage/myisam/ha_myisam.cc:
Use new error message
------------------------------------------------------------
revno: 3929 [merge]
fixes bug: https://launchpad.net/bugs/1243150
committer: Teemu Ollakka <teemu.ollakka@codership.com>
branch nick: 5.5-23
timestamp: Wed 2013-10-23 20:05:01 +0300
message: 8kB/s -
References lp:1243150 - initial wsrep hton cleanups
* Removed wsrep_seqno_changed boolean
* wsrep_cleanup_transaction() is now called explicitly whenever it is
clear that transaction has come to an end
* wsrep_trans_cache_is_empty() now checks from cache_mngr recardless of
command type
* Separated call to wsrep->post_commit() to own function, called from
transaction.cc whenever appropriate
* wsrep_thd_is_brute_force() now investigates only thd->wsrep_exec_mode
* More comments and debug time assertions
* Debug code to check that wsrep position stored in InnoDB is
monotinically increasing. Enabled with UNIV_DEBUG
------------------------------------------------------------
revno: 3928
fixes bug: https://launchpad.net/bugs/1237889
committer: Teemu Ollakka <teemu.ollakka@codership.com>
branch nick: 5.5-23
timestamp: Tue 2013-10-22 22:01:20 +0300
message:
References lp:1237889 - reverting fix in r3926, it broke crash recovery
------------------------------------------------------------
revno: 3927
fixes bug: https://launchpad.net/bugs/1240040
committer: Teemu Ollakka <teemu.ollakka@codership.com>
branch nick: 5.5-23
timestamp: Tue 2013-10-15 14:46:15 +0300
message:
References lp:1240040 - added WSREP_MYSQL_DB as a key for DROP VIEW
------------------------------------------------------------
revno: 3926
fixes bug: https://launchpad.net/bugs/1237889
committer: Teemu Ollakka <teemu.ollakka@codership.com>
branch nick: 5.5-23
timestamp: Thu 2013-10-10 14:22:58 +0300
message:
References lp:1237889 - register wsrep hton only if thd->wsrep_exec_mode == LO
CAL_STATE
------------------------------------------------------------
revno: 3925
fixes bug: https://launchpad.net/bugs/1235635
committer: Alexey Yurchenko <alexey.yurchenko@codership.com>
branch nick: 5.5-23
timestamp: Sat 2013-10-05 18:03:06 +0300
message:
References lp:1235635 - fixed the warning by initializing c_lock to NULL.
AND 'KILL SESSION' LEAD TO CRASH
Analysis:
--------
This situation occurs when the connection executes query
"show engine innodb status" and this connection is killed by
executing statement "kill <con>" by another connection.
In function "innodb_show_status", function "stat_print"
is called to print the status but return value of function
is not checked. After killing connection, if write to
connection fails then error is returned and same is set
in Diagnostic area. Since FALSE is returned from
"innodb_show_status" now, assert to check no error
is set in function "set_eof_status" (called from
my_eof) is failing.
Fix:
----
Changed code to check return value of function "stat_print"
in "innodb_show_status".
STATUS OF ROLLBACKED TRANSACTION" and bug #17054007 - "TRANSACTION
IS NOT FULLY ROLLED BACK IN CASE OF INNODB DEADLOCK".
The problem in the first bug report was that although deadlock involving
metadata locks was reported using the same error code and message as InnoDB
deadlock it didn't rollback transaction like the latter. This caused
confusion to users as in some cases after ER_LOCK_DEADLOCK transaction
could have been restarted immediately and in some cases rollback was
required.
The problem in the second bug report was that although InnoDB deadlock
caused transaction rollback in all storage engines it didn't cause release
of metadata locks. So concurrent DDL on the tables used in transaction was
blocked until implicit or explicit COMMIT or ROLLBACK was issued in the
connection which got InnoDB deadlock.
The former issue has stemmed from the fact that when support for detection
and reporting metadata locks deadlocks was added we erroneously assumed
that InnoDB doesn't rollback transaction on deadlock but only last statement
(while this is what happens on InnoDB lock timeout actually) and so didn't
implement rollback of transactions on MDL deadlocks.
The latter issue was caused by the fact that rollback of transaction due
to deadlock is carried out by setting THD::transaction_rollback_request
flag at the point where deadlock is detected and performing rollback
inside of trans_rollback_stmt() call when this flag is set. And
trans_rollback_stmt() is not aware of MDL locks, so no MDL locks are
released.
This patch solves these two problems in the following way:
- In case when MDL deadlock is detect transaction rollback is requested
by setting THD::transaction_rollback_request flag.
- Code performing rollback of transaction if THD::transaction_rollback_request
is moved out from trans_rollback_stmt(). Now we handle rollback request
on the same level as we call trans_rollback_stmt() and release statement/
transaction MDL locks.
-Added test and extra code to ensure we don't leave keyread on for a handler table.
-Create on disk temporary files always with long data pointers if SQL_SMALL_RESULT is not used. This ensures that we can handle temporary files bigger than 4G.
mysql-test/include/default_mysqld.cnf:
Run test suite with smaller aria keybuffer size
mysql-test/suite/maria/maria3.result:
Run test suite with smaller aria keybuffer size
mysql-test/suite/sys_vars/r/aria_pagecache_buffer_size_basic.result:
Run test suite with smaller aria keybuffer size
sql/handler.cc:
Disable key read (extra safety if something went wrong)
sql/multi_range_read.cc:
Ensure we have don't leave keyread on for secondary_file
sql/opt_range.cc:
Simplify code with mark_columns_used_by_index_no_reset()
Ensure that read_keys_and_merge() disableds keyread if it enables it
sql/opt_subselect.cc:
Remove not anymore used argument for create_internal_tmp_table()
sql/sql_derived.cc:
Remove not anymore used argument for create_internal_tmp_table()
sql/sql_select.cc:
Use 'enable_keyread()' instead of calling HA_EXTRA_RESET. (Makes debugging easier)
Create on disk temporary files always with long data pointers if SQL_SMALL_RESULT is not used. This ensures that we can handle temporary files bigger than 4G.
Remove not anymore used argument for create_internal_tmp_table()
More DBUG
sql/sql_select.h:
Remove not anymore used argument for create_internal_tmp_table()
bzr merge lp:maria/5.5 -rtag:mariadb-5.5.31
Text conflict in cmake/cpack_rpm.cmake
Text conflict in debian/dist/Debian/control
Text conflict in debian/dist/Ubuntu/control
Text conflict in sql/CMakeLists.txt
Conflict adding file sql/db.opt. Moved existing file to sql/db.opt.moved.
Conflict adding file sql/db.opt.moved. Moved existing file to sql/db.opt.moved.moved.
Text conflict in sql/mysqld.cc
Text conflict in support-files/mysql.spec.sh
8 conflicts encountered.
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
Due to an internal change in the server code in between 5.1 and 5.5
(wl#2649) the hash function used in KEY partitioning changed
for numeric and date/time columns (from binary hash calculation
to character based hash calculation).
Also enum/set changed from latin1 ci based hash calculation to
binary hash between 5.1 and 5.5. (bug#11759782).
These changes makes KEY [sub]partitioned tables on any of
the affected column types incompatible with 5.5 and above,
since the calculation of partition id differs.
Also since InnoDB asserts that a deleted row was previously
read (positioned), the server asserts on delete of a row that
is in the wrong partition.
The solution for this situation is:
1) The partitioning engine will check that delete/update will go to the
partition the row was read from and give an error otherwise, consisting
of the rows partitioning fields. This will avoid asserts in InnoDB and
also alert the user that there is a misplaced row. A detailed error
message will be given, including an entry to the error log consisting
of both table name, partition and row content (PK if exists, otherwise
all partitioning columns).
2) A new optional syntax for KEY () partitioning in 5.5 is allowed:
[SUB]PARTITION BY KEY [ALGORITHM = N] (list_of_cols)
Where N = 1 uses the same hashing as 5.1 (Numeric/date/time fields uses
binary hashing, ENUM/SET uses charset hashing) N = 2 uses the same
hashing as 5.5 (Numeric/date/time fields uses charset hashing,
ENUM/SET uses binary hashing). If not set on CREATE/ALTER it will
default to 2.
This new syntax should probably be ignored by NDB.
3) Since there is a demand for avoiding scanning through the full
table, during upgrade the ALTER TABLE t PARTITION BY ... command is
considered a no-op (only .frm change) if everything except ALGORITHM
is the same and ALGORITHM was not set before, which allows manually
upgrading such table by something like:
ALTER TABLE t PARTITION BY KEY ALGORITHM = 1 () or
ALTER TABLE t PARTITION BY KEY ALGORITHM = 2 ()
4) Enhanced partitioning with CHECK/REPAIR to also check for/repair
misplaced rows. (Also works for ALTER TABLE t CHECK/REPAIR PARTITION)
CHECK FOR UPGRADE:
If the .frm version is < 5.5.3
and uses KEY [sub]partitioning
and an affected column type
then it will fail with an message:
KEY () partitioning changed, please run:
ALTER TABLE `test`.`t1` PARTITION BY KEY ALGORITHM = 1 (a)
PARTITIONS 12
(i.e. current partitioning clause, with the addition of
ALGORITHM = 1)
CHECK without FOR UPGRADE:
if MEDIUM (default) or EXTENDED options are given:
Scan all rows and verify that it is in the correct partition.
Fail for the first misplaced row.
REPAIR:
if default or EXTENDED (i.e. not QUICK/USE_FRM):
Scan all rows and every misplaced row is moved into its correct
partitions.
5) Updated mysqlcheck (called by mysql_upgrade) to handle the
new output from CHECK FOR UPGRADE, to run the ALTER statement
instead of running REPAIR.
This will allow mysql_upgrade (or CHECK TABLE t FOR UPGRADE) to upgrade
a KEY [sub]partitioned table that has any affected field type
and a .frm version < 5.5.3 to ALGORITHM = 1 without rebuild.
Also notice that if the .frm has a version of >= 5.5.3 and ALGORITHM
is not set, it is not possible to know if it consists of rows from
5.1 or 5.5! In these cases I suggest that the user does:
(optional)
LOCK TABLE t WRITE;
SHOW CREATE TABLE t;
(verify that it has no ALGORITHM = N, and to be safe, I would suggest
backing up the .frm file, to be used if one need to change to another
ALGORITHM = N, without needing to rebuild/repair)
ALTER TABLE t <old partitioning clause, but with ALGORITHM = N>;
which should set the ALGORITHM to N (if the table has rows from
5.1 I would suggest N = 1, otherwise N = 2)
CHECK TABLE t;
(here one could use the backed up .frm instead and change to a new N
and run CHECK again and see if it passes)
and if there are misplaced rows:
REPAIR TABLE t;
(optional)
UNLOCK TABLES;
Analysis:
---------
When the server is out of memory, an error is raised
to indicate the same. Handling the error requires
more memory to be allocated which fails, hence the
error handling loops in a recursion and causes the
server to crash.
Fix:
---
a) Prevents pushing the 'out of memory' error condition
to the diagnostic area as it requires memory allocation.
GET DIAGNOSTICS, SHOW WARNINGS and SHOW ERRORS statements
will not show information about this error. However the
'out of memory' error is returned to the client.
b) It sets the ME_FATALERROR flag when 'out of memory' errors
are reported (for places where the flag is not already set).
This flag prevents activation of SP error handlers which also
require memory allocation and therefore are likely to fail.
- Added --verbose to BUILD scripts to get make to write out compile commands.
- Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 was used with build scripts.
- Don't write warnings about replication variables when doing bootstrap.
- Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
- Ignore some compiler warnings
BUILD/FINISH.sh:
Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 or --verbose was used
BUILD/SETUP.sh:
Added --verbose to print out the full compile lines
Updated help message
client/mysqltest.cc:
Fixed that one can use 'replace' with cat_file
cmake/configure.pl:
If --verbose is used, get make to write out compile commands
debian/dist/Debian/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
debian/dist/Ubuntu/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
include/my_pthread.h:
Made set_timespec_time_nsec() more portable.
include/mysql/psi/mysql_thread.h:
Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
mysql-test/suite/innodb/r/auto_increment_dup.result:
Fixed wrong DBUG_SYNC
mysql-test/suite/innodb/t/auto_increment_dup.test:
Fixed wrong DBUG_SYNC
mysql-test/suite/perfschema/include/upgrade_check.inc:
Make test more portable for changes in *.sql files
mysql-test/suite/perfschema/r/pfs_upgrade.result:
Updated test results
mysql-test/valgrind.supp:
Ignore running Aria checkpoint thread
scripts/mysqlaccess.sh:
Changed reference of bugs database
Ensure that also client-server group is read.
sql/handler.cc:
Added missing syncpoint
sql/mysqld.cc:
Don't write warnings about replication variables when doing bootstrap
sql/mysqld.h:
Don't write warnings about replication variables when doing bootstrap
sql/rpl_rli.cc:
Don't write warnings about replication variables when doing bootstrap
sql/sql_insert.cc:
Don't mask SERVER_SHUTDOWN in insert_delayed
This is done to be able to distingush between shutdown and interrupt errors
support-files/compiler_warnings.supp:
Ignore some compiler warnings in xtradb,innobase, oqgraph, yassl, string3.h
KILL now breaks locks inside InnoDB
Fixed possible deadlock when running INNODB STATUS
Added ha_kill_query() and kill_query() to send kill signal to all storage engines
Added reset_killed() to ensure we don't reset killed state while awake() is getting called
include/mysql/plugin.h:
Added thd_mark_as_hard_kill()
include/mysql/plugin_audit.h.pp:
Added thd_mark_as_hard_kill()
include/mysql/plugin_auth.h.pp:
Added thd_mark_as_hard_kill()
include/mysql/plugin_ftparser.h.pp:
Added thd_mark_as_hard_kill()
sql/handler.cc:
Added ha_kill_query() to send kill signal to all storage engines
sql/handler.h:
Added ha_kill_query() and kill_query() to send kill signal to all storage engines
sql/log_event.cc:
Use reset_killed()
sql/mdl.cc:
use thd->killed instead of thd_killed() to abort on soft kill
sql/sp_rcontext.cc:
Use reset_killed()
sql/sql_class.cc:
Fixed possible deadlock in INNODB STATUS by not getting thd->LOCK_thd_data if it's locked.
Use reset_killed()
Tell storge engines that KILL has been sent
sql/sql_class.h:
Added reset_killed() to ensure we don't reset killed state while awake() is getting called.
Added mark_as_hard_kill()
sql/sql_insert.cc:
Use reset_killed()
sql/sql_parse.cc:
Simplify detection of killed queries.
Use reset_killed()
sql/sql_select.cc:
Use reset_killed()
sql/sql_union.cc:
Use reset_killed()
storage/innobase/handler/ha_innodb.cc:
Added innobase_kill_query()
Fixed error reporting for interrupted queries.
storage/xtradb/handler/ha_innodb.cc:
Added innobase_kill_query()
Fixed error reporting for interrupted queries.
CONSISTENT SNAPSHOT OPTION
A transaction is started with a consistent snapshot. After
the transaction is started new indexes are added to the
table. Now when we issue an update statement, the optimizer
chooses an index. When the index scan is being initialized
via ha_innobase::change_active_index(), InnoDB reports
the error code HA_ERR_TABLE_DEF_CHANGED, with message
stating that "insufficient history for index".
This error message is propagated up to the SQL layer. But
the my_error() api is never called. The statement level
diagnostics area is not updated with the correct error
status (it remains in Diagnostics_area::DA_EMPTY).
Hence the following check in the Protocol::end_statement()
fails.
516 case Diagnostics_area::DA_EMPTY:
517 default:
518 DBUG_ASSERT(0);
519 error= send_ok(thd->server_status, 0, 0, 0, NULL);
520 break;
The fix is to backport the fix of bugs 14365043, 11761652
and 11746399.
14365043 PROTOCOL::END_STATEMENT(): ASSERTION `0' FAILED
11761652 HA_RND_INIT() RESULT CODE NOT CHECKED
11746399 RETURN VALUES OF HA_INDEX_INIT() AND INDEX_INIT() IGNORED
rb://1227 approved by guilhem and mattiasj.
- Wrong thd uses in Item_subselect, could lead to crash
- Inititalize uninitialized variable in new autoincrement handling code
sql/handler.cc:
More DBUG_PRINT
sql/item_subselect.cc:
Wrong thd uses in Item_subselect, could lead to crash
storage/innobase/handler/ha_innodb.cc:
Initialize variable needed by upper level. This only happens when auto-increment value wraps over.
storage/xtradb/handler/ha_innodb.cc:
Initialize variable needed by upper level. This only happens when auto-increment value wraps over.
create table t1 (a smallint primary key auto_increment);
insert into t1 values(32767);
insert into t1 values(NULL);
ERROR 1062 (23000): Duplicate entry '32767' for key 'PRIMARY
Now on always gets error HA_ERR_AUTOINC_RANGE=167 "Out of range value for column", independent of
store engine, SQL Mode or number of inserted rows. This is an unique error that is easier to test for in replication.
Another bug fix is that we now get an error when trying to insert a too big auto-generated value, even in non-strict mode.
Before one get insted the max column value inserted.
This patch also fixes some issues with inserting negative numbers in an auto-increment column.
Fixed the ER_DUP_ENTRY and HA_ERR_AUTOINC_ERANGE are compared the same between master and slave.
This ensures that replication works between an old server to a new slave for auto-increment overflow errors.
Added SQLSTATE errors for handler errors
Smaller bug fixes:
* Added warnings for duplicate key errors when using INSERT IGNORE
* Fixed bug when using --skip-log-bin followed by --log-bin, which did set log-bin to "0"
* Allow one to see how cmake is called by using --just-print --just-configure
BUILD/FINISH.sh:
--just-print --just-configure now shows how cmake would be invoked. Good for understanding parameters to cmake.
cmake/configure.pl:
--just-print --just-configure now shows how cmake would be invoked. Good for understanding parameters to cmake.
include/CMakeLists.txt:
Added handler_state.h
include/handler_state.h:
SQLSTATE for handler error messages.
Required for HA_ERR_AUTOINC_ERANGE, but solves also some other cases.
mysql-test/extra/binlog_tests/binlog.test:
Fixed old wrong behaviour
Added more tests
mysql-test/extra/binlog_tests/binlog_insert_delayed.test:
Reset binary log to only print what's necessary in show_binlog_events
mysql-test/extra/rpl_tests/rpl_auto_increment.test:
Update to new error codes
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Ignore warnings as this depends on how the test is run
mysql-test/include/strict_autoinc.inc:
On now gets an error on overflow
mysql-test/r/auto_increment.result:
Update results after fixing error message
mysql-test/r/auto_increment_ranges_innodb.result:
Test new behaviour
mysql-test/r/auto_increment_ranges_myisam.result:
Test new behaviour
mysql-test/r/commit_1innodb.result:
Added warnings for duplicate key error
mysql-test/r/create.result:
Added warnings for duplicate key error
mysql-test/r/insert.result:
Added warnings for duplicate key error
mysql-test/r/insert_select.result:
Added warnings for duplicate key error
mysql-test/r/insert_update.result:
Added warnings for duplicate key error
mysql-test/r/mix2_myisam.result:
Added warnings for duplicate key error
mysql-test/r/myisam_mrr.result:
Added warnings for duplicate key error
mysql-test/r/null_key.result:
Added warnings for duplicate key error
mysql-test/r/replace.result:
Update to new error codes
mysql-test/r/strict_autoinc_1myisam.result:
Update to new error codes
mysql-test/r/strict_autoinc_2innodb.result:
Update to new error codes
mysql-test/r/strict_autoinc_3heap.result:
Update to new error codes
mysql-test/r/trigger.result:
Added warnings for duplicate key error
mysql-test/r/xtradb_mrr.result:
Added warnings for duplicate key error
mysql-test/suite/binlog/r/binlog_innodb_row.result:
Updated result
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Out of range data for auto-increment is not inserted anymore
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
Updated result
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Out of range data for auto-increment is not inserted anymore
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result
mysql-test/suite/innodb/r/innodb-autoinc.result:
Update to new error codes
mysql-test/suite/innodb/r/innodb-lock.result:
Updated results
mysql-test/suite/innodb/r/innodb.result:
Updated results
mysql-test/suite/innodb/r/innodb_bug56947.result:
Updated results
mysql-test/suite/innodb/r/innodb_mysql.result:
Updated results
mysql-test/suite/innodb/t/innodb-autoinc.test:
Update to new error codes
mysql-test/suite/maria/maria3.result:
Updated result
mysql-test/suite/maria/mrr.result:
Updated result
mysql-test/suite/optimizer_unfixed_bugs/r/bug43617.result:
Updated result
mysql-test/suite/rpl/r/rpl_auto_increment.result:
Update to new error codes
mysql-test/suite/rpl/r/rpl_insert_delayed,stmt.rdiff:
Updated results
mysql-test/suite/rpl/r/rpl_loaddatalocal.result:
Updated results
mysql-test/t/auto_increment.test:
Update to new error codes
mysql-test/t/auto_increment_ranges.inc:
Test new behaviour
mysql-test/t/auto_increment_ranges_innodb.test:
Test new behaviour
mysql-test/t/auto_increment_ranges_myisam.test:
Test new behaviour
mysql-test/t/replace.test:
Update to new error codes
mysys/my_getopt.c:
Fixed bug when using --skip-log-bin followed by --log-bin, which did set log-bin to "0"
sql/handler.cc:
Ignore negative values for signed auto-increment columns
Always give an error if we get an overflow for an auto-increment-column (instead of inserting the max value)
Ensure that the row number is correct for the out-of-range-value error message.
******
Fixed wrong printing of column namn for "Out of range value" errors
Fixed that INSERT_ID is correctly replicated also for out-of-range autoincrement values
Fixed that print_keydup_error() can also be used to generate warnings
******
Return HA_ERR_AUTOINC_ERANGE (167) instead of ER_WARN_DATA_OUT_OF_RANGE for auto-increment overflow
sql/handler.h:
Allow INSERT IGNORE to continue also after out-of-range inserts.
Fixed that print_keydup_error() can also be used to generate warnings
sql/log_event.cc:
Added DBUG_PRINT
Fixed the ER_AUTOINC_READ_FAILED, ER_DUP_ENTRY and HA_ERR_AUTOINC_ERANGE are compared the same between master and slave.
This ensures that replication works between an old server to a new slave for auto-increment overflow errors.
sql/sql_insert.cc:
Add warnings for duplicate key errors when using INSERT IGNORE
sql/sql_state.c:
Added handler errors
sql/sql_table.cc:
Update call to print_keydup_error()
storage/innobase/handler/ha_innodb.cc:
Fixed increment handling of auto-increment columns to be consistent with rest of MariaDB.
storage/xtradb/handler/ha_innodb.cc:
Fixed increment handling of auto-increment columns to be consistent with rest of MariaDB.
bzr merge lp:maria/5.5
...
Text conflict in CMakeLists.txt
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_truncate.cc
4 conflicts encountered.
