Problem was that initial GTID was set on wsrep_before_prepare
out-of-order. In practice GTID was set to same as previous
executed transaction GTID. In recovery valid GTID was found
from prepared transaction and this transaction is committed
leading to fact that same GTID was executed twice.
This is fixed by setting invalid GTID at wsrep_before_prepare
and later in wsrep_before_commit actual correct GTID is set
and this setting is done while we are in commit monitor i.e.
assigment is done in order of replication.
In recovery if prepared transaction is found we check its
GTID, if it is invalid transaction will be rolled back
and if it is valid it will be committed.
Initialize gtid seqno from recovered seqno when
bootstrapping a new cluster.
Added two test cases for both mariabackup and rsync SST methods
to show that GTIDs remain consistent on cluster and that
all expected rows are in the table.
Added tests for wsrep GTID recovery with binlog on and off.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
AES block cipher mode CTR is available at the moment
only from OpenSSL 1.0.1. Do not run this testcase
using CTR combination if it is not available.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
according to MDEV-17550 it's informational, not fatal.
"last committed" is part of the certification index purge process.
depending on what tests and in what order are run it can be triggered
at unspecified times during the testing. If the test is happen to
shut down the server at this very time, the log will have:
[Warning] WSREP: Failed to report last committed XXXYYYZZZ, -77 (File descriptor in bad state)
Another batch of changes that should make the SST process
more reliable in all scenarios:
1) Added hostname or CN verification when stunnel is used
with certificate chain verification (verifyChain = yes);
2) Added check for the absence of the stunnel utility for
mtr tests;
3) Deletion of working files before and after SST is done
more accurately;
4) rsync on joiner can be run even if the path to its
configuration file contains spaces;
5) More accurate directory creation (for data files and
for logs);
6) IST with mysqldump no longer turns off statement logging;
7) Reset password for mysqldump when password is empty but
username is specified;
8) More reliable quoting when generating statements in
wsrep_sst_mysqldump;
9) Added explicit generation of 2048-bit Diffie-Hellman
parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
suitable server groups in configuration file, as well as
from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
if they implemented as built-in shell commands (unlikely
on real systems, but more reliable).
Another batch of changes that should make the SST process
more reliable in all scenarios:
1) Added hostname or CN verification when stunnel is used
with certificate chain verification (verifyChain = yes);
2) Added check for the absence of the stunnel utility for
mtr tests;
3) Deletion of working files before and after SST is done
more accurately;
4) rsync on joiner can be run even if the path to its
configuration file contains spaces;
5) More accurate directory creation (for data files and
for logs);
6) IST with mysqldump no longer turns off statement logging;
7) Reset password for mysqldump when password is empty but
username is specified;
8) More reliable quoting when generating statements in
wsrep_sst_mysqldump;
9) Added explicit generation of 2048-bit Diffie-Hellman
parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
suitable server groups in configuration file, as well as
from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
if they implemented as built-in shell commands (unlikely
on real systems, but more reliable).
Currently, running mtr with an incorrect (for example, new or
obsolete) version of wsrep_provider (for example, with the 26
version of libgalera_smm.so) leads to the failure of tests in
several suites with vague error diagnostics.
As for the galera_3nodes suite, the mtr also does not effectively
check all the prerequisites after merge with MDEV-18426 fixes.
For example, tests that using mariabackup do not check for presence
of ss and socat/nc. This is due to improper handling of relative
paths in mtr scripts.
In addition, some tests in different suites can be run without
setting the environment variables such as MTR_GALERA_TFMT, XBSTREAM,
and so on.
To eliminate all these issues, this patch makes the following changes:
1. Added auxiliary wsrep_mtr_check utility (which located in the
mysql-test/lib/My/SafeProcess subdirectory), which compares the
versions of the wsrep API that used by the server and by the wsrep
provider library, and it does this comparison safely, without
accessing the API if the versions do not match.
2. All checks related to the presence of mariabackup and utilities
that necessary for its operation transferred from the local directories
of different mtr suites (from the suite.pm files) to the main suite.pm
file. This not only reduces the amount of code and eliminates duplication
of identical code fragments, but also avoids problems due to the inability
of mtr to consider relative paths to include files when checking skip
combinations.
3. Setting the values of auxiliary environment variables that
are necessary for Galera, SST scripts and mariabackup (to work
properly) is moved to the main mysql-test-run.pl script, so as
not to duplicate this code in different suites, and to avoid
partial corrections of the same errors for different suites
(while other suites remain uncorrected).
4. Fixed duplication of the have_file_key_management.inc and
have_filekeymanagement.inc files between different suites,
these checks are also transferred to the top level.
5. Added garbd presence check and garbd path variable.
https://jira.mariadb.org/browse/MDEV-18565
Currently, running mtr with an incorrect (for example, new or
obsolete) version of wsrep_provider (for example, with the 26
version of libgalera_smm.so) leads to the failure of tests in
several suites with vague error diagnostics.
As for the galera_3nodes suite, the mtr also does not effectively
check all the prerequisites after merge with MDEV-18426 fixes.
For example, tests that using mariabackup do not check for presence
of ss and socat/nc. This is due to improper handling of relative
paths in mtr scripts.
In addition, some tests in different suites can be run without
setting the environment variables such as MTR_GALERA_TFMT, XBSTREAM,
and so on.
To eliminate all these issues, this patch makes the following changes:
1. Added auxiliary wsrep_mtr_check utility (which located in the
mysql-test/lib/My/SafeProcess subdirectory), which compares the
versions of the wsrep API that used by the server and by the wsrep
provider library, and it does this comparison safely, without
accessing the API if the versions do not match.
2. All checks related to the presence of mariabackup and utilities
that necessary for its operation transferred from the local directories
of different mtr suites (from the suite.pm files) to the main suite.pm
file. This not only reduces the amount of code and eliminates duplication
of identical code fragments, but also avoids problems due to the inability
of mtr to consider relative paths to include files when checking skip
combinations.
3. Setting the values of auxiliary environment variables that
are necessary for Galera, SST scripts and mariabackup (to work
properly) is moved to the main mysql-test-run.pl script, so as
not to duplicate this code in different suites, and to avoid
partial corrections of the same errors for different suites
(while other suites remain uncorrected).
4. Fixed duplication of the have_file_key_management.inc and
have_filekeymanagement.inc files between different suites,
these checks are also transferred to the top level.
5. Added garbd presence check and garbd path variable.
https://jira.mariadb.org/browse/MDEV-18565
The MDEV-17262 commit 26432e49d3
was skipped. In Galera 4, the implementation would seem to require
changes to the streaming replication.
In the tests archive.rnd_pos main.profiling, disable_ps_protocol
for SHOW STATUS and SHOW PROFILE commands until MDEV-18974
has been fixed.
* make galera.galera_sst_xtrabackup* not big
* auto-select between socat and nc, whatever available
* auto-skip xtrabackup tests if no xtrabackup or neither socat nor nc
In CTAS, handlers get registered under statement transaction
(st_transactions::stmt), while ha_fake_trx_id(), used by CTAS,
looked under standard transaction (st_transactions::all) for
registered handlers, and thus it failed to grab a fake transaction
ID. As a result, with no valid transaction ID, wsrep commit failed
with an error.
ha_fake_trx_id() now looks for handlers registered under 'stmt'
in case 'all' is empty. Also modified the logic to print warning
only once if none of the registered handlers have fake_trx_id.
