Subselect_single_value_engine cannot handle table value constructor used as
subquery. That's why any table value constructor TVC used as subquery is
converted into a select over derived table whose specification is TVC.
Currently the names of the columns of the derived table DT are taken from
the first element of TVC and if the k-th component of the element happens
to be a subquery the text representation of this subquery serves as the
name of the k-th column of the derived table. References of all columns of
the derived table DT compose the select list of the result of the conversion.
If a definition of a view contained a table value constructor used as a
subquery and the view was registered after this conversion had been
applied we could register an invalid view definition if the first element
of TVC contained a subquery as its component: the name of this component
was taken from the original subquery, while the name of the corresponding
column of the derived table was taken from the text representation of the
subquery produced by the function SELECT_LEX::print() and these names were
usually differ from each other.
To avoid registration of such invalid views the function SELECT_LEX::print()
now prints the original TVC instead of the select in which this TVC has
been wrapped. Now the specification of registered view looks like as if no
conversions from TVC to selects were done.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
This patch also fixes some bugs detected by valgrind after this
patch:
- Not enough copy_func elements was allocated by Create_tmp_table() which
causes an memory overwrite in Create_tmp_table::add_fields()
I added an ASSERT() to be able to detect this also without valgrind.
The bug was that TMP_TABLE_PARAM::copy_fields was not correctly set
when calling create_tmp_table().
- Aria::empty_bits is not allocated if there is no varchar/char/blob
fields in the table. Fixed code to take this into account.
This cannot cause any issues as this is just a memory access
into other Aria memory and the content of the memory would not be used.
- Aria::last_key_buff was not allocated big enough. This may have caused
issues with rtrees and ma_extra(HA_EXTRA_REMEMBER_POS) as they
would use the same memory area.
- Aria and MyISAM didn't take extended key parts into account, which
caused problems when copying rec_per_key from engine to sql level.
- Mark asan builds with 'asan' in version strihng to detect these in
not_valgrind_build.inc.
This is needed to not have main.sp-no-valgrind fail with asan.
Added comments that not used keys of derivied tables will be deleted.
Added some comments about checking if pos_in_table_list is 0.
Other things:
- Added a marker (DBTYPE_IN_PREDICATE) in TABLE_LIST->derived_type
to indicate that the table was generated from IN (list). This is
useful for debugging and can later be used by explain if needed.
- Removed a not needed test of table->pos_in_table_list as it should
always be valid at this point in time.
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
SUPER privilege used to allow various actions that were alternatively
allowed by one of BINLOG ADMIN, BINLOG MONITOR, BINLOG REPLAY,
CONNECTION ADMIN, FEDERATED ADMIN, REPL MASTER ADMIN, REPL SLAVE ADMIN,
SET USER, SLAVE MONITOR.
Now SUPER no longer does that, one has to grant one of the fine-grained
privileges above to be to perform corresponding actions.
On upgrade from MariaDB versions 10.11 and below all the privileges
above are granted automatically if the user has SUPER.
As a side-effect, such an upgrade will allow SUPER-user to run SHOW
BINLOG EVENTS, SHOW RELAYLOG EVENTS, SHOW SLAVE HOSTS, even if he wasn't
able to do it before the upgrade.
This makes it easier to compare different costs and also allows
the optimizer to optimizer different storage engines more reliably.
- Added tests/check_costs.pl, a tool to verify optimizer cost calculations.
- Most engine costs has been found with this program. All steps to
calculate the new costs are documented in Docs/optimizer_costs.txt
- User optimizer_cost variables are given in microseconds (as individual
costs can be very small). Internally they are stored in ms.
- Changed DISK_READ_COST (was DISK_SEEK_BASE_COST) from a hard disk cost
(9 ms) to common SSD cost (400MB/sec).
- Removed cost calculations for hard disks (rotation etc).
- Changed the following handler functions to return IO_AND_CPU_COST.
This makes it easy to apply different cost modifiers in ha_..time()
functions for io and cpu costs.
- scan_time()
- rnd_pos_time() & rnd_pos_call_time()
- keyread_time()
- Enhanched keyread_time() to calculate the full cost of reading of a set
of keys with a given number of ranges and optional number of blocks that
need to be accessed.
- Removed read_time() as keyread_time() + rnd_pos_time() can do the same
thing and more.
- Tuned cost for: heap, myisam, Aria, InnoDB, archive and MyRocks.
Used heap table costs for json_table. The rest are using default engine
costs.
- Added the following new optimizer variables:
- optimizer_disk_read_ratio
- optimizer_disk_read_cost
- optimizer_key_lookup_cost
- optimizer_row_lookup_cost
- optimizer_row_next_find_cost
- optimizer_scan_cost
- Moved all engine specific cost to OPTIMIZER_COSTS structure.
- Changed costs to use 'records_out' instead of 'records_read' when
recalculating costs.
- Split optimizer_costs.h to optimizer_costs.h and optimizer_defaults.h.
This allows one to change costs without having to compile a lot of
files.
- Updated costs for filter lookup.
- Use a better cost estimate in best_extension_by_limited_search()
for the sorting cost.
- Fixed previous issues with 'filtered' explain column as we are now
using 'records_out' (min rows seen for table) to calculate filtering.
This greatly simplifies the filtering code in
JOIN_TAB::save_explain_data().
This change caused a lot of queries to be optimized differently than
before, which exposed different issues in the optimizer that needs to
be fixed. These fixes are in the following commits. To not have to
change the same test case over and over again, the changes in the test
cases are done in a single commit after all the critical change sets
are done.
InnoDB changes:
- Updated InnoDB to not divide big range cost with 2.
- Added cost for InnoDB (innobase_update_optimizer_costs()).
- Don't mark clustered primary key with HA_KEYREAD_ONLY. This will
prevent that the optimizer is trying to use index-only scans on
the clustered key.
- Disabled ha_innobase::scan_time() and ha_innobase::read_time() and
ha_innobase::rnd_pos_time() as the default engine cost functions now
works good for InnoDB.
Other things:
- Added --show-query-costs (\Q) option to mysql.cc to show the query
cost after each query (good when working with query costs).
- Extended my_getopt with GET_ADJUSTED_VALUE which allows one to adjust
the value that user is given. This is used to change cost from
microseconds (user input) to milliseconds (what the server is
internally using).
- Added include/my_tracker.h ; Useful include file to quickly test
costs of a function.
- Use handler::set_table() in all places instead of 'table= arg'.
- Added SHOW_OPTIMIZER_COSTS to sys variables. These are input and
shown in microseconds for the user but stored as milliseconds.
This is to make the numbers easier to read for the user (less
pre-zeros). Implemented in 'Sys_var_optimizer_cost' class.
- In test_quick_select() do not use index scans if 'no_keyread' is set
for the table. This is what we do in other places of the server.
- Added THD parameter to Unique::get_use_cost() and
check_index_intersect_extension() and similar functions to be able
to provide costs to called functions.
- Changed 'records' to 'rows' in optimizer_trace.
- Write more information to optimizer_trace.
- Added INDEX_BLOCK_FILL_FACTOR_MUL (4) and INDEX_BLOCK_FILL_FACTOR_DIV (3)
to calculate usage space of keys in b-trees. (Before we used numeric
constants).
- Removed code that assumed that b-trees has similar costs as binary
trees. Replaced with engine calls that returns the cost.
- Added Bitmap::find_first_bit()
- Added timings to join_cache for ANALYZE table (patch by Sergei Petrunia).
- Added records_init and records_after_filter to POSITION to remember
more of what best_access_patch() calculates.
- table_after_join_selectivity() changed to recalculate 'records_out'
based on the new fields from best_access_patch()
Bug fixes:
- Some queries did not update last_query_cost (was 0). Fixed by moving
setting thd->...last_query_cost in JOIN::optimize().
- Write '0' as number of rows for const tables with a matching row.
Some internals:
- Engine cost are stored in OPTIMIZER_COSTS structure. When a
handlerton is created, we also created a new cost variable for the
handlerton. We also create a new variable if the user changes a
optimizer cost for a not yet loaded handlerton either with command
line arguments or with SET
@@global.engine.optimizer_cost_variable=xx.
- There are 3 global OPTIMIZER_COSTS variables:
default_optimizer_costs The default costs + changes from the
command line without an engine specifier.
heap_optimizer_costs Heap table costs, used for temporary tables
tmp_table_optimizer_costs The cost for the default on disk internal
temporary table (MyISAM or Aria)
- The engine cost for a table is stored in table_share. To speed up
accesses the handler has a pointer to this. The cost is copied
to the table on first access. If one wants to change the cost one
must first update the global engine cost and then do a FLUSH TABLES.
This was done to be able to access the costs for an open table
without any locks.
- When a handlerton is created, the cost are updated the following way:
See sql/keycaches.cc for details:
- Use 'default_optimizer_costs' as a base
- Call hton->update_optimizer_costs() to override with the engines
default costs.
- Override the costs that the user has specified for the engine.
- One handler open, copy the engine cost from handlerton to TABLE_SHARE.
- Call handler::update_optimizer_costs() to allow the engine to update
cost for this particular table.
- There are two costs stored in THD. These are copied to the handler
when the table is used in a query:
- optimizer_where_cost
- optimizer_scan_setup_cost
- Simply code in best_access_path() by storing all cost result in a
structure. (Idea/Suggestion by Igor)
The MDEV-25004 test innodb_fts.versioning is omitted because ever since
commit 685d958e38 InnoDB would not allow
writes to a database where the redo log file ib_logfile0 is missing.
1. In case of system-versioned table add row_end into FTS_DOC_ID index
in fts_create_common_tables() and innobase_create_key_defs().
fts_n_uniq() returns 1 or 2 depending on whether the table is
system-versioned.
After this patch recreate of FTS_DOC_ID index is required for
existing system-versioned tables. If you see this message in error
log or server warnings: "InnoDB: Table db/t1 contains 2 indexes
inside InnoDB, which is different from the number of indexes 1
defined in the MariaDB" use this command to fix the table:
ALTER TABLE db.t1 FORCE;
2. Fix duplicate history for secondary unique index like it was done
in MDEV-23644 for clustered index (932ec586aa). In case of
existing history row which conflicts with currently inseted row we
check in row_ins_scan_sec_index_for_duplicate() whether that row
was inserted as part of current transaction. In that case we
indicate with DB_FOREIGN_DUPLICATE_KEY that new history row is not
needed and should be silently skipped.
3. Some parts of MDEV-21138 (7410ff436e) reverted. Skipping of
FTS_DOC_ID index for history rows made problems with purge
system. Now this is fixed differently by p.2.
4. wait_all_purged.inc checks that we didn't affect non-history rows
so they are deleted and purged correctly.
Additional FTS fixes
fts_init_get_doc_id(): exclude history rows from max_doc_id
calculation. fts_init_get_doc_id() callback is used only for crash
recovery.
fts_add_doc_by_id(): set max value for row_end field.
fts_read_stopword(): stopwords table can be system-versioned too. We
now read stopwords only for current data.
row_insert_for_mysql(): exclude history rows from doc_id validation.
row_merge_read_clustered_index(): exclude history_rows from doc_id
processing.
fts_load_user_stopword(): for versioned table retrieve row_end field
and skip history rows. For non-versioned table we retrieve 'value'
field twice (just for uniformity).
FTS tests for System Versioning now include maybe_versioning.inc which
adds 3 combinations:
'vers' for debug build sets sysvers_force and
sysvers_hide. sysvers_force makes every created table
system-versioned, sysvers_hide hides WITH SYSTEM VERSIONING
for SHOW CREATE.
Note: basic.test, stopword.test and versioning.test do not
require debug for 'vers' combination. This is controlled by
$modify_create_table in maybe_versioning.inc and these
tests run WITH SYSTEM VERSIONING explicitly which allows to
test 'vers' combination on non-debug builds.
'vers_trx' like 'vers' sets sysvers_force_trx and sysvers_hide. That
tests FTS with trx_id-based System Versioning.
'orig' works like before: no System Versioning is added, no debug is
required.
Upgrade/downgrade test for System Versioning is done by
innodb_fts.versioning. It has 2 combinations:
'prepare' makes binaries in std_data (requires old server and OLD_BINDIR).
It tests upgrade/downgrade against old server as well.
'upgrade' tests upgrade against binaries in std_data.
Cleanups:
Removed innodb-fts-stopword.test as it duplicates stopword.test
Specifically:
Revert "MDEV-29664 Assertion `!n_mysql_tables_in_use' failed in innobase_close_connection"
This reverts commit ba875e9396.
Revert "MDEV-29620 Assertion `next_insert_id == 0' failed in handler::ha_external_lock"
This reverts commit aa08a7442a.
Revert "MDEV-29628 Memory leak after CREATE OR REPLACE with foreign key"
This reverts commit c579d66ba6.
Revert "MDEV-29609 create_not_windows test fails with different result"
This reverts commit cb583b2f1b.
Revert "MDEV-29544 SIGSEGV in HA_CREATE_INFO::finalize_locked_tables"
This reverts commit dcd66c3814.
Revert "MDEV-28933 CREATE OR REPLACE fails to recreate same constraint name"
This reverts commit cf6c517632.
Revert "MDEV-28933 Moved RENAME_CONSTRAINT_IDS to include/sql_funcs.h"
This reverts commit f1e1c1335b.
Revert "MDEV-28956 Locking is broken if CREATE OR REPLACE fails under LOCK TABLES"
This reverts commit a228ec80e3.
Revert "MDEV-25292 gcol.gcol_bugfixes --ps fix"
This reverts commit 24fff8267d.
Revert "MDEV-25292 Disable atomic replace for slave-generated or-replace"
This reverts commit 2af15914cb.
Revert "MDEV-25292 backup_log improved"
This reverts commit 34398a20b5.
Revert "MDEV-25292 Atomic CREATE OR REPLACE TABLE"
This reverts commit 93c8252f02.
Revert "MDEV-25292 Table_name class for (db, table_name, alias)"
This reverts commit d145dda9c7.
Revert "MDEV-25292 ha_table_exists() cleanup and improvement"
This reverts commit 409b8a86de.
Revert "MDEV-25292 Cleanups"
This reverts commit 595dad83ad.
Revert "MDEV-25292 Refactoring: moved select_field_count into Alter_info."
This reverts commit f02af1d229.
To prevent ASAN heap-use-after-poison in the MDEV-16549 part of
./mtr --repeat=6 main.derived
the initialization of Name_resolution_context was cleaned up.
=========== Problem =============
- `show columns` is not working for temporary tables, even though there
is enough privilege `create temporary tables`.
=========== Solution =============
- Append `TMP_TABLE_ACLS` privilege when running `show columns` for temp
tables.
- Additionally `check_access()` for database only once, not for each
field
=========== Additionally =============
- Update comments for function `check_table_access` arguments
Reviewed by: <vicentiu@mariadb.org>
For queries like
"SELECT * FROM INFORMATION_SCHEMA.PARAMETERS
WHERE SPECIFIC_NAME='proc_name'"
and
"SELECT * FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_NAME='proc_name'"
there is a possibility to avoid loading of the stored procedure code
and parsing it to retrieve parameters.
If the name of the procedure/function is specified explicitly then
it is possible to filter out routines that do not match at
an early stage.
Queries to INFORMATION_SCHEMA.PARAMETERS and ROUTINES tables are always
performed using full index scan of the mysql.proc primary key
on fields (`db`,`name`,`type`). This can be done in a much more effective
way if `db` and `name` field values can be derived from the WHERE statement,
like here:
SELECT * FROM INFORMATION_SCHEMA.PARAMETERS
WHERE SPECIFIC_SCHEMA = 'test' AND SPECIFIC_NAME = 'my_func'
or here:
SELECT * FROM information_schema.ROUTINES
WHERE ROUTINE_SCHEMA='test' AND ROUTINE_NAME='my_func'.
In such cases index range scan may be employed instead of full index
scan. This commit makes the server retrieve lookup field values from
the SQL statement and perform index range scan instead of full index
scan if possible.
The problem is that if table definition cache (TDC) is full of real tables
which are in tables cache, view definition can not stay there so will be
removed by its own underlying tables.
In situation above old mechanism of detection matching definition in PS
and current version always require reprepare and so prevent executing
the PS.
One work around is to increase TDC, other - improve version check for
views/triggers (which is done here). Now in suspicious cases we check:
- timestamp (microseconds) of the view to be sure that version really
have changed;
- time (microseconds) of creation of a trigger related to time
(microseconds) of statement preparation.
- Added missing information about database of corresponding table for various types of commands
- Update some typos
- Reviewed by: <vicentiu@mariadb.org>
