This bug could cause a crash of the server when processing a query with
ROWNUM() if it used in its FROM list a reference to a mergeable view
defined as SELECT over more than one table that contained ORDER BY clause.
When a mergeable view with ORDER BY clause and without LIMIT clause is used
in the FROM list of a query that does not have ORDER BY clause the ORDER BY
clause of the view is moved to the query. The code that performed this
transformation forgot to delete the moved ORDER BY list from the view.
If a query contains ROWNUM() and uses a mergeable multi-table view with
ORDER BY then according to the current code of TABLE_LIST::init_derived()
the view has to be forcibly materialized. As the query and the view shared
the same items in its ORDER BY lists they could not be properly resolved
either in the query or in the view. This led to a crash of the server.
This patch has returned back the original signature of LEX::can_not_use_merged()
to comply with 10.4 code of the condition that checks whether a megeable
view has to be forcibly materialized.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Adding virtual methods to class Schema:
make_item_func_replace()
make_item_func_substr()
make_item_func_trim()
This is a non-functional preparatory change for MDEV-27744.
Now the same rule applied to vews and derived tables. So we should
allow merge of views (and derived) in queries with rownum, because
it do not change results, only makes query plans better.
Rewrite datetime comparison conditions into sargeable. For example,
YEAR(col) <= val -> col <= YEAR_END(val)
YEAR(col) < val -> col < YEAR_START(val)
YEAR(col) >= val -> col >= YEAR_START(val)
YEAR(col) > val -> col > YEAR_END(val)
YEAR(col) = val -> col BETWEEN YEAR_START(val) AND YEAR_END(val)
Do the same with DATE(col), for example:
DATE(col) <= val -> col <= DAY_END(val)
After such a rewrite index lookup on column "col" can be employed
EXPLAIN EXTENDED for an UPDATE/DELETE/INSERT/REPLACE statement did not
produce the warning containing the text representation of the query
obtained after the optimization phase. Such warning was produced for
SELECT statements, but not for DML statements.
The patch fixes this defect of EXPLAIN EXTENDED for DML statements.
This patch fixes not only the assertion failure in the function
Field_iterator_table_ref::set_field_iterator() but also:
- fixes the problem of forced materialization of derived tables used
in subqueries contained in WHERE clauses of single-table and multi-table
UPDATE and DELETE statements
- fixes the problem of MDEV-17954 that prevented execution of multi-table
DELETE statements if they use in their WHERE clauses references to
the tables that are updated.
The patch must be considered a complement to the patch for MDEV-28883.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
This patch introduces a new way of handling UPDATE and DELETE commands at
the top level after the parsing phase. This new way of processing update
and delete statements can be seen in the implementation of the prepare()
and execute() methods from the new Sql_cmd_dml class. This class derived
from the Sql_cmd class can be considered as an interface class for processing
such commands as SELECT, INSERT, UPDATE, DELETE and other comands
manipulating data in tables.
With this patch processing of update and delete statements after parsing
proceeds by the following schema:
- precheck of the access rights is performed for the used tables
- the used tables are opened
- context analysis phase is performed for the statement
- the used tables are locked
- the statement is optimized and executed
- clean-up is performed for the statement
The implementation of the method Sql_cmd_dml::execute() adheres this schema.
The virtual functions of the class Sql_cmd_dml used for precheck of the
access rights, context analysis, optimization and execution allow to adjust
this schema for processing data manipulation statements of any types.
This schema of processing data manipulation statements is taken from the
current MySQL code. Moreover the definition the class Sql_cmd_dml introduced
in this patch is almost a full replica of such class in the existing MySQL.
However the implementation of the derived classes for update and delete
statements is quite different. This implementation employs the JOIN class
for all kinds of update and delete statements. It allows to perform main
bulk of context analysis actions by the function JOIN::prepare(). This
guarantees that characteristics and properties of the statement tree
discovered for optimization phase when doing context analysis are the same
for single-table and multi-table updates and deletes.
With this patch the following functions are gone:
mysql_prepare_update(), mysql_multi_update_prepare(),
mysql_update(), mysql_multi_update(),
mysql_prepare_delete(), mysql_multi_delete_prepare(), mysql_delete().
The code within these functions have been used as much as possible though.
The functions mysql_test_update() and mysql_test_delete() are also not
needed anymore. The method Sql_cmd_dml::prepare() serves processing
- update/delete statement
- PREPARE stmt FROM "<update/delete statement>"
- EXECUTE stmt when stmt is prepared from update/delete statement.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
MDEV-30668 Set function aggregated in outer select used in view definition
This patch fixes two bugs concerning views whose specifications contain
subqueries with set functions aggregated in outer selects.
Due to the first bug those such views that have implicit grouping were
considered as mergeable. This led to wrong result sets for selects from
these views.
Due to the second bug the aggregation select was determined incorrectly and
this led to bogus error messages.
The patch added several test cases for these two bugs and for four other
duplicate bugs.
The patch also enables view-protocol for many other test cases.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Subselect_single_value_engine cannot handle table value constructor used as
subquery. That's why any table value constructor TVC used as subquery is
converted into a select over derived table whose specification is TVC.
Currently the names of the columns of the derived table DT are taken from
the first element of TVC and if the k-th component of the element happens
to be a subquery the text representation of this subquery serves as the
name of the k-th column of the derived table. References of all columns of
the derived table DT compose the select list of the result of the conversion.
If a definition of a view contained a table value constructor used as a
subquery and the view was registered after this conversion had been
applied we could register an invalid view definition if the first element
of TVC contained a subquery as its component: the name of this component
was taken from the original subquery, while the name of the corresponding
column of the derived table was taken from the text representation of the
subquery produced by the function SELECT_LEX::print() and these names were
usually differ from each other.
To avoid registration of such invalid views the function SELECT_LEX::print()
now prints the original TVC instead of the select in which this TVC has
been wrapped. Now the specification of registered view looks like as if no
conversions from TVC to selects were done.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
This patch fixes the patch for bug MDEV-30248 that unsatisfactorily
resolved the problem of resolution of references to CTE. In some cases
when such a reference has the same table name as the name of one of
CTEs containing this reference the reference could be resolved incorrectly
that led to an invalid select tree where units could be mutually dependent.
This in its turn could lead to an infinite sequence of recursive calls or
to falls into infinite loops.
The patch also removes LEX::resolve_references_to_cte_in_hanging_cte() as
with the new code for resolution of CTE references the call of this
function is not needed anymore.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Use SELECT_LEX to save lists for ORDER BY and GROUP BY before parsing
WINDOW clauses / specifications. This is needed for proper parsing
of a nested WINDOW clause when a WINDOW clause is used in a subquery
contained in another WINDOW clause.
Fix assignment of empty SQL_I_List to another one (in case of empty list
next shoud point on first).
The cause of regression was handling for ROWNUM() function.
For queries like
SELECT ROWNUM() FROM ... ORDER BY ...
ROWNUM() should be computed before the ORDER BY.
The computation was moved to be before the ORDER BY for any entries in
the select list that had RAND_TABLE_BIT set.
This had a negative impact on queries in form:
SELECT sp_func() FROM t1 ORDER BY ... LIMIT n
where sp_func() is NOT declared as DETERMINISTIC (and so has
RAND_TABLE_BIT set).
The fix is to require evaluation for sorting only for the ROWNUM()
function. Functions that just have RAND_TABLE_BIT() can be computed
after ORDER BY ... LIMIT is applied.
(think about a possible index that satisfies the ORDER BY clause. In
that case, the the rows would be read in the needed order and we would
stop after reading LIMIT rows, achieving the same effect).
For commands
(1) alter table t1 add partition (partition p2);
(2) alter table t1 add partition (partition px history);
It printed the same error message:
Wrong partitioning type, expected type: `SYSTEM_TIME`
For (1) it is not clear from the syntax that we are trying to add
HASH partition. For (2) it is not clear that the table partitioning is
different than SYSTEM_TIME. Now it prints what type we are trying to
add to what type of partitioning.
Fixed warning unused function rename_field_in_list() for compilation
without partitioning.
