rename OPTION_KEEP_LOG -> OPTION_BINLOG_THIS_TRX.
Meaning: transaction cache will be written to binlog even on rollback.
convert log_current_statement to OPTION_BINLOG_THIS_STMT.
Meaning: the statement will be written to binlog (or trx binlog cache)
even if it normally wouldn't be.
setting OPTION_BINLOG_THIS_STMT must always set OPTION_BINLOG_THIS_TRX,
otherwise the statement won't be logged if the transaction is rolled back.
Use OPTION_BINLOG_THIS to set both.
CHECK violation
Analysis: When there is constraint fail we return non-zero value for
view_check_option(). So we continue the loop which doesn't increment the
counter because it increments at the end of the loop.
Fix: Increment m_current_row_for_warning() at the beginning of loop. This
will also fix similar bugs if any, about counter not incrementing
correctly because of continue.
ER_WRONG_VALUE_COUNT_ON_ROW for the 1st row
Analysis: Current row for warning does not increment for prepare phase
Fix: Increment current row for warning if number of fields in the table and
row values dont match and number of values in rows is greater than number
of fields
in case of a bulk insert the server sends all rows to the engine, and
then the engine replies that there was ER_DUP_ENTRY somewhere.
the exact number of the row that caused the error is unknown.
Happens with Innodb engine.
Move unlock_locked_table() past drop_open_table(), and
rollback current statement, so that we can actually unlock the table.
Anything else results in assertions, in drop, or unlock, or in close_table.
Also fixes MDEV-24467 Memory not freed after failed INSERT DELAYED
Description:
In case of an error (e.g. data truncation) during mysql_insert()
handling an INSERT DELAYED, the data type specific data in
fields (e.g. Field_blob::value) is not taken over by the delayed
writer thread.
All fields in table_list->table are freed by free_root()
immediately after mysql_insert(). To avoid a memory leak,
we need to free the specific data before exiting mysql_insert()
on error.
Variable wsrep_forced_binlog_format has higher priority than
binlog_format. In situation where STATEMENT is used and DELAYED INSERT
is executing we should fall back to non-delay INSERT.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
use existing Warning_info::m_current_row_for_warning instead
of a newly introduced counter.
But use m_current_row_for_warning to count rows also in the parser
and during prepare.
Extended the parser for GET DIAGNOSTICS to use ERROR_INDEX to get
warning/error index.
Error information is stored in Sql_condition. So it can be used to
store the index of warning/error too. THD::current_insert_index keeps a
track of count for each row that is processed or going to be inserted in the
table (or first row in case of prepare phase). When an error occurs,
first we need to fetch corrected error index (using correct_error_index())
for an error number. This is needed because in prepare phase, the error
may not be because of rows/values. In such case, correct value of
error_index should be 0. Once correct value if fetched, assign it to
Sql_condition::error_index when the object is created during error/warning.
This error_index variable is returned when ERROR_INDEX is used in
GET DIAGNOSTICS.
This adds following new thread states:
* waiting to execute in isolation - DDL is waiting to execute in TOI mode.
* waiting for TOI DDL - some other statement is waiting for DDL to complete.
* waiting for flow control - some statement is paused while flow control is in effect.
* waiting for certification - the transaction is being certified.
in about a hundred of users of MY_BITMAP, only two were using its
built-in mutex, and only one of those two was actually needing it.
Remove the mutex from MY_BITMAP, remove all associated conditions
and checks in bitmap functions. Use an external LOCK_temp_pool
mutex and temp_pool_set_next/temp_pool_clear_bit acccessors.
Remove bitmap_init/bitmap_free, always use my_* versions.
In a rebase of the merge, two preceding commits were accidentally reverted:
commit 112b23969a (MDEV-26308)
commit ac2857a5fb (MDEV-25717)
Thanks to Daniele Sciascia for noticing this.
Contains following fixes:
* allow TOI commands to timeout while trying to acquire TOI with
override lock_wait_timeout with a LONG_TIMEOUT only after
succesfully entering TOI
* only ignore lock_wait_timeout on TOI
* fix galera_split_brain test as TOI operation now returns ER_LOCK_WAIT_TIMEOUT after lock_wait_timeout
* explicitly test for TOI
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
The problem is that array binding uses net buffer to read parameters for each
execution while each execiting with RETURNING write in the same buffer.
Solution is to allocate new net buffer to avoid changing buffer we are reading
from.
also avoid an oxymoron of using `MYSQL_PLUGIN_IMPORT` under
`#ifdef MYSQL_SERVER`, and empty_clex_str is so trivial that a plugin
can define it if needed.
There are a few different cases to consider
Logging of CREATE TABLE and CREATE TABLE ... LIKE
- If REPLACE is used and there was an existing table, DDL log the drop of
the table.
- If discovery of table is to be done
- DDL LOG create table
else
- DDL log create table (with engine type)
- create the table
- If table was created
- Log entry to binary log with xid
- Mark DDL log completed
Crash recovery:
- If query was in binary log do nothing and exit
- If discoverted table
- Delete the .frm file
-else
- Drop created table and frm file
- If table was dropped, write a DROP TABLE statement in binary log
CREATE TABLE ... SELECT required a little more work as when one is using
statement logging the query is written to the binary log before commit is
done.
This was fixed by adding a DROP TABLE to the binary log during crash
recovery if the ddl log entry was not closed. In this case the binary log
will contain:
CREATE TABLE xxx ... SELECT ....
DROP TABLE xxx;
Other things:
- Added debug_crash_here() functionality to Aria to be able to test
crash in create table between the creation of the .MAI and the .MAD files.
The ROWNUM() function is for SELECT mapped to JOIN->accepted_rows, which is
incremented for each accepted rows.
For Filesort, update, insert, delete and load data, we map ROWNUM() to
internal variables incremented when the table is changed.
The connection between the row counter and Item_func_rownum is done
in sql_select.cc::fix_items_after_optimize() and
sql_insert.cc::fix_rownum_pointers()
When ROWNUM() is used anywhere in query, the optimization to ignore ORDER
BY in sub queries are disabled. This was done to get the following common
Oracle query to work:
select * from (select * from t1 order by a desc) as t where rownum() <= 2;
MDEV-3926 "Wrong result with GROUP BY ... WITH ROLLUP" contains a discussion
about this topic.
LIMIT optimization is enabled when in a top level WHERE clause comparing
ROWNUM() with a numerical constant using any of the following expressions:
- ROWNUM() < #
- ROWNUM() <= #
- ROWNUM() = 1
ROWNUM() can be also be the right argument to the comparison function.
LIMIT optimization is done in two cases:
- For the current sub query when the ROWNUM comparison is done on the top
level:
SELECT * from t1 WHERE rownum() <= 2 AND t1.a > 0
- For an inner sub query, when the upper level has only a ROWNUM comparison
in the WHERE clause:
SELECT * from (select * from t1) as t WHERE rownum() <= 2
In Oracle mode, one can also use ROWNUM without parentheses.
Other things:
- Fixed bug where the optimizer tries to optimize away sub queries
with RAND_TABLE_BIT set (non-deterministic queries). Now these
sub queries will not be converted to joins. This bug fix was also
needed to get rownum() working inside subqueries.
- In remove_const() remove setting simple_order to FALSE if ROLLUP is
USED. This code was disable a long time ago because of wrong assignment
in the following code. Instead we set simple_order to false if
RAND_TABLE_BIT was used in the SELECT list. This ensures that
we don't delete ORDER BY if the result set is not deterministic, like
in 'SELECT RAND() AS 'r' FROM t1 ORDER BY r';
- Updated parameters for Sort_param::init_for_filesort() to be able
to provide filesort with information where the number of accepted
rows should be stored
- Reordered fields in class Filesort to optimize storage layout
- Added new error messsage to tell that a function can't be used in HAVING
- Added field 'with_rownum' to THD to mark that ROWNUM() is used in the
query.
Co-author: Oleksandr Byelkin <sanja@mariadb.com>
LIMIT optimization for sub query
