mark old keys in the ALTER TABLE with the `old` flag, not with
the `key_create_info.check_for_duplicate_indexes`.
This allows to mark old foreign keys too.
We introduce simple plugin dependency. A plugin init function may
return HA_ERR_RETRY_INIT. If this happens during server startup when
the server is trying to initialise all plugins, the failed plugins
will be retried, until no more plugins succeed in initialisation or
want to be retried.
This will fix spider init bugs which is caused in part by its
dependency on Aria for initialisation.
The reason we need a new return code, instead of treating every
failure as a request for retry, is that it may be impossible to clean
up after a failed plugin initialisation. Take InnoDB for example, it
has a global variable `buf_page_cleaner_is_active`, which may not
satisfy an assertion during a second initialisation try, probably
because InnoDB does not expect the initialisation to be called
twice.
The problem was an incorrect unmark_start_commit() in
signal_error_to_sql_driver_thread(). If an event group gets an error, this
unmark could run after the following GCO started, and the subsequent
re-marking could access de-allocated GCO.
The offending unmark_start_commit() looks obviously incorrect, and the fix
is to just remove it. It was introduced in the MDEV-8302 patch, the commit
message of which suggests it was added there solely to satisfy an assertion
in ha_rollback_trans(). So update this assertion instead to not trigger for
event groups that experienced an error (rgi->worker_error). When an error
occurs in an event group, all following event groups are skipped anyway, so
the unmark should never be needed in this case.
Reviewed-by: Andrei Elkin <andrei.elkin@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Where a read-only server permits writes through replication, it
should not permit user connections to commit/rollback XA
transactions prepared via replication. The bug reported in
MDEV-30978 shows that this can happen. This is because there is no
read only check in the XA transaction logic, the most relevant one
occurs in ha_commit_trans() for normal statements/transactions.
This patch extends the XA transaction logic to check the read only
status of the server before performing an XA COMMIT or ROLLBACK.
Reviewed By:
Andrei Elkin <andrei.elkin@mariadb.com>
The new statistics is enabled by adding the "engine", "innodb" or "full"
option to --log-slow-verbosity
Example output:
# Pages_accessed: 184 Pages_read: 95 Pages_updated: 0 Old_rows_read: 1
# Pages_read_time: 17.0204 Engine_time: 248.1297
Page_read_time is time doing physical reads inside a storage engine.
(Writes cannot be tracked as these are usually done in the background).
Engine_time is the time spent inside the storage engine for the full
duration of the read/write/update calls. It uses the same code as
'analyze statement' for calculating the time spent.
The engine statistics is done with a generic interface that should be
easy for any engine to use. It can also easily be extended to provide
even more statistics.
Currently only InnoDB has counters for Pages_% and Undo_% status.
Engine_time works for all engines.
Implementation details:
class ha_handler_stats holds all engine stats. This class is included
in handler and THD classes.
While a query is running, all statistics is updated in the handler. In
close_thread_tables() the statistics is added to the THD.
handler::handler_stats is a pointer to where statistics should be
collected. This is set to point to handler::active_handler_stats if
stats are requested. If not, it is set to 0.
handler_stats has also an element, 'active' that is 1 if stats are
requested. This is to allow engines to avoid doing any 'if's while
updating the statistics.
Cloned or partition tables have the pointer set to the base table if
status are requested.
There is a small performance impact when using --log-slow-verbosity=engine:
- All engine calls in 'select' will be timed.
- IO calls for InnoDB reads will be timed.
- Incrementation of counters are done on local variables and accesses
are inline, so these should have very little impact.
- Statistics has to be reset for each statement for the THD and each
used handler. This is only 40 bytes, which should be neglectable.
- For partition tables we have to loop over all partitions to update
the handler_status as part of table_init(). Can be optimized in the
future to only do this is log-slow-verbosity changes. For this to work
we have to update handler_status for all opened partitions and
also for all partitions opened in the future.
Other things:
- Added options 'engine' and 'full' to log-slow-verbosity.
- Some of the new files in the test suite comes from Percona server, which
has similar status information.
- buf_page_optimistic_get(): Do not increment any counter, since we are
only validating a pointer, not performing any buf_pool.page_hash lookup.
- Added THD argument to save_explain_data_intern().
- Switched arguments for save_explain_.*_data() to have
always THD first (generates better code as other functions also have THD
first).
MDEV-29253 Detect incompatible MySQL partition scheme and either convert
them or report to user and in error log.
This task is about converting in place MySQL 5.6 and 5.7 partition tables
to MariaDB as part of mariadb-upgrade.
- Update TABLE_SHARE::init_from_binary_frm_image() to be able to read
MySQL frm files with partitions.
- Create .par file, if it do not exists, on open of partitioned table.
Executing mariadb-upgrade will create all the missing .par files.
The MySQL .frm file will be changed to MariaDB format after next
ALTER TABLE.
Other changes:
- If we are using stored mysql_version to distingush between MySQL and
MariaDB .frm file information, do not upgrade mysql_version in the
.frm file as part of CHECK TABLE .. FOR UPGRADE as this would cause
problems next time we parse the .frm file.
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This is a backport from 10.5.
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This must be some kind of merge error because at ha_check_engine
we just find out used engine or default engine. There is
no need to roll-back transaction here even if engine is not
supported as it will be handled later.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
If a replica failed to update the GTID slave state when committing
an XA PREPARE, the replica would retry the transaction and get an
out-of-order GTID error. This is because the commit phase of an XA
PREPARE is bifurcated. That is, first, the prepare is handled by the
relevant storage engines. Then second, the GTID slave state is
updated as a separate autocommit transaction. If the second phase
fails, and the transaction is retried, then the same transaction is
attempted to be committed again, resulting in a GTID out-of-order
error.
This patch fixes this error by immediately stopping the slave and
reporting the appropriate error. That is, there was logic to bypass
the error when updating the GTID slave state table if the underlying
error is allowed for retry on a parallel slave. This patch adds a
parameter to disallow the error bypass, thereby forcing the error
state to still happen.
Reviewed By
============
Andrei Elkin <andrei.elkin@mariadb.com>
If we are inside stored function or trigger we should not commit
or rollback current statement transaction.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This error was discovered while working on
MDEV-30540 Wrong result with IN list length reaching
IN_PREDICATE_CONVERSION_THRESHOLD
If there is read error from handler::ha_rnd_next() during a recursive
query, st_select_lex_unit::exec_recursive() will crash as it will try to
get the error code from a structure that was deleted by the callee.
The code was using the construct:
sl->join->exec();
saved_error=sl->join->error;
This does not work as sl->join was freed by the exec() and sl->join would
be set to 0.
Fixed by having JOIN::exec() return the error code.
The included test case simulates the error in ha_rnd_next(), which causes
a crash without the patch.
scovered whle working on
MDEV-30540 Wrong result with IN list length reaching
IN_PREDICATE_CONVERSION_THRESHOLD
If there is read error from handler::ha_rnd_next() during a recursive
query, st_select_lex_unit::exec_recursive() will crash as it will try to
get the error code from a structure that was deleted by the callee.
The code was using the construct:
sl->join->exec();
saved_error=sl->join->error;
This does not work as sl->join was freed by the exec() and sl->join was
set to 0.
Fixed by having JOIN::exec() return the error code.
The included test case simulates the error in ha_rnd_next(), which causes
a crash without the patch.
1. Adding a separate MY_COLLATION_HANDLER
my_collation_ucs2_general_mysql500_ci_handler
implementing a proper order for ucs2_general_mysql500_ci
The problem happened because ucs2_general_mysql500_ci
erroneously used my_collation_ucs2_general_ci_handler.
2. Cosmetic changes: Renaming:
- plane00_mysql500 to my_unicase_mysql500_page00
- my_unicase_pages_mysql500 to my_unicase_mysql500_pages
to use the same naming style with:
- my_unicase_default_page00
- my_unicase_defaul_pages
3. Moving code fragments from
- handler::check_collation_compatibility() in handler.cc
- upgrade_collation() in table.cc
into new methods in class Charset, to reuse the code easier.
The reason for this is that we call file->index_flags(index, 0, 1)
multiple times in best_access_patch()when optimizing a table.
For example, in InnoDB, the calls is not trivial (4 if's and 2 assignments)
Now the function is inlined and is just a memory reference.
Other things:
- handler::is_clustering_key() and pk_is_clustering_key() are now inline.
- Added TABLE::can_use_rowid_filter() to simplify some code.
- Test if we should use a rowid_filter only if can_use_rowid_filter() is
true.
- Added TABLE::is_clustering_key() to avoid a memory reference.
- Simplify some code using the fact that HA_KEYREAD_ONLY is true implies
that HA_CLUSTERED_INDEX is false.
- Added DBUG_ASSERT to TABLE::best_range_rowid_filter() to ensure we
do not call it with a clustering key.
- Reorginized elements in struct st_key to get better memory alignment.
- Updated ha_innobase::index_flags() to not have
HA_DO_RANGE_FILTER_PUSHDOWN for clustered index
"select * from information_schema.tables limit 1" was giving the following
warning in the log:
[ERROR] Invalid (old?) table or database name '#rocksdb'
This includes:
- cleanup and optimization of filtering and pushdown engine code.
- Adjusted costs for rowid filters (based on extensive testing
and profiling).
This made a small two changes to the handler_rowid_filter_is_active()
API:
- One should not call it with a zero pointer!
- One does not need to call handler_rowid_filter_is_active() for every
row anymore. It is enough to check if filter is active by calling it
call it during index_init() or when handler::rowid_filter_changed()
is called
The changes was to avoid unnecessary function calls and checks if
pushdown conditions and rowid_filter is not used.
Updated costs for rowid_filter_lookup() to be closer to reality.
The old cost was based only on rowid_compare_cost. This is now
changed to take into account the overhead in checking the rowid.
Changed the Range_rowid_filter class to use DYNAMIC_ARRAY directly
instead of Dynamic_array<>. This was done to be able to use the new
append_dynamic() functions which gives a notable speed improvment
compared to the old code. Removing the abstraction also makes
the code easier to understand.
The cost of filtering is now slightly lower than before, which
is reflected in some test cases that is now using rowid filters.
