If we fail to open a tablespace while looking for FILE_CHECKPOINT, we
set the corruption flag. Specifically, if encryption key is missing, we
would not be able to open an encrypted tablespace and the flag could be
set. We miss checking for this flag and report "Missing FILE_CHECKPOINT"
Address review comment to improve the test. Flush pages before starting
no-checkpoint block. It should improve the number of cases where the
test is skipped because some intermediate checkpoint is triggered.
Before MariaDB 10.3.5, the binlog position was stored in the TRX_SYS page,
while after it is stored in rollback segments. There is code to read the
legacy position from TRX_SYS to handle upgrades. The problem was if the
legacy position happens to compare larger than the position found in
rollback segments; in this case, the old TRX_SYS position would incorrectly
be preferred over the newer position from rollback segments.
Fixed by always preferring a position from rollback segments over a legacy
position.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The motivation of introducing the parameter
innodb_purge_rseg_truncate_frequency in
mysql/mysql-server@28bbd66ea5 and
mysql/mysql-server@8fc2120fed
seems to have been to avoid stalls due to freeing undo log pages
or truncating undo log tablespaces. In MariaDB Server,
innodb_undo_log_truncate=ON should be a much lighter operation
than in MySQL, because it will not involve any log checkpoint.
Another source of performance stalls should be
trx_purge_truncate_rseg_history(), which is shrinking the history list
by freeing the undo log pages whose undo records have been purged.
To alleviate that, we will introduce a purge_truncation_task that will
offload this from the purge_coordinator_task. In that way, the next
innodb_purge_batch_size pages may be parsed and purged while the pages
from the previous batch are being freed and the history list being shrunk.
The processing of innodb_undo_log_truncate=ON will still remain the
responsibility of the purge_coordinator_task.
purge_coordinator_state::count: Remove. We will ignore
innodb_purge_rseg_truncate_frequency, and act as if it had been
set to 1 (the maximum shrinking frequency).
purge_coordinator_state::do_purge(): Invoke an asynchronous task
purge_truncation_callback() to free the undo log pages.
purge_sys_t::iterator::free_history(): Free those undo log pages
that have been processed. This used to be a part of
trx_purge_truncate_history().
purge_sys_t::clone_end_view(): Take a new value of purge_sys.head
as a parameter, so that it will be updated while holding exclusive
purge_sys.latch. This is needed for race-free access to the field
in purge_truncation_callback().
Reviewed by: Vladislav Lesin
Allow ALTER TABLE ... IMPORT TABLESPACE without creating the table
followed by discarding the tablespace.
That is, assuming we want to import table t1 to t2, instead of
CREATE TABLE t2 LIKE t1;
ALTER TABLE t2 DISCARD TABLESPACE;
FLUSH TABLES t1 FOR EXPORT;
--copy_file $MYSQLD_DATADIR/test/t1.cfg $MYSQLD_DATADIR/test/t2.cfg
--copy_file $MYSQLD_DATADIR/test/t1.ibd $MYSQLD_DATADIR/test/t2.ibd
UNLOCK TABLES;
ALTER TABLE t2 IMPORT TABLESPACE;
We can simply do
FLUSH TABLES t1 FOR EXPORT;
--copy_file $MYSQLD_DATADIR/test/t1.cfg $MYSQLD_DATADIR/test/t2.cfg
--copy_file $MYSQLD_DATADIR/test/t1.frm $MYSQLD_DATADIR/test/t2.frm
--copy_file $MYSQLD_DATADIR/test/t1.ibd $MYSQLD_DATADIR/test/t2.ibd
UNLOCK TABLES;
ALTER TABLE t2 IMPORT TABLESPACE;
We achieve this by creating a "stub" table in the second scenario
while opening the table, where t2 does not exist but needs to import
from t1. The "stub" table is similar to a table that is created but
then instructed to discard its tablespace.
We include tests with various row formats, encryption, with indexes
and auto-increment.
Before commit 6112853cda in MySQL 4.1.1
introduced the parameter innodb_file_per_table, all InnoDB data was
written to the InnoDB system tablespace (often named ibdata1).
A serious design problem is that once the system tablespace has grown to
some size, it cannot shrink even if the data inside it has been deleted.
There are also other design problems, such as the server hang MDEV-29930
that should only be possible when using innodb_file_per_table=0 and
innodb_undo_tablespaces=0 (storing both tables and undo logs in the
InnoDB system tablespace).
The parameter innodb_change_buffering was deprecated
in commit b5852ffbee.
Starting with commit baf276e6d4
(MDEV-19229) the number of innodb_undo_tablespaces can be increased,
so that the undo logs can be moved out of the system tablespace
of an existing installation.
If all these things (tables, undo logs, and the change buffer) are
removed from the InnoDB system tablespace, the only variable-size
data structure inside it is the InnoDB data dictionary.
DDL operations on .ibd files was optimized in
commit 86dc7b4d4c (MDEV-24626).
That should have removed any thinkable performance advantage of
using innodb_file_per_table=0.
Since there should be no benefit of setting innodb_file_per_table=0,
the parameter should be deprecated. Starting with MySQL 5.6 and
MariaDB Server 10.0, the default value is innodb_file_per_table=1.
trx_sys_t::undo_log_nonempty: Set to true if there are undo logs
to rollback and purge.
The algorithm for re-creating the undo tablespace when
trx_sys_t::undo_log_nonempty is disabled:
1) trx_sys_t::reset_page(): Reset the TRX_SYS page and assign all
rollback segment slots from 1..127 to FIL_NULL
2) Free the rollback segment header page of system tablespace
for the slots 1..127
3) Update the binlog and WSREP information in system tablespace
rollback segment header
Step (1), (2) and Step (3) should happen atomically within a
single mini-transaction.
4) srv_undo_delete_old_tablespaces(): Delete the old undo tablespaces
present in the undo log directory
5) Make checkpoint to get rid of old undo log tablespaces redo logs
6) Assign new start space id for the undo log tablespaces
7) Re-create the specified undo log tablespaces. InnoDB uses same
mtr for this one and step (6)
8) Make checkpoint again, so that server or mariabackup
can read the undo log tablespace page0 before applying
the redo logs
srv_undo_tablespaces_reinit(): Recreate the undo log tablespaces.
It does reset trx_sys page, delete the old undo tablespaces,
update the binlog offset, write set replication checkpoint
in system rollback segment page
trx_rseg_update_binlog_offset(): Added 2 new parameters to pass
binlog file name and binlog offset
trx_rseg_array_init(): Return error if the rollback segment
slot points to non-existent tablespace
srv_undo_tablespaces_init(): Added new parameter mtr
to initialize all undo tablespaces
trx_assign_rseg_low(): Allow the transaction to use the rollback
segment slots(1..127) even if InnoDB failed to change to the
requested innodb_undo_tablespaces=0
srv_start(): Override the user specified value of
innodb_undo_tablespaces variable with already existing actual
undo tablespaces
wf_incremental_process(): Detects whether TRX_SYS page has been
modified since last backup. If it is then incremental backup
fails and throws the information about taking full backup again
xb_assign_undo_space_start(): Removed the function. Because
undo001 has first undo space id value in page0
Added test case to test the scenario during startup and mariabackup
incremental process too.
Reviewed-by : Marko Mäkelä
Tested-by : Matthias Leich
A few regression tests invoke heavy flushing of the buffer pool
and may trigger warnings that tablespaces could not be deleted
because of pending writes. Those warnings are to be expected
during the execution of such tests.
The warnings are also frequently seen with Valgrind or MemorySanitizer.
For those, the global suppression in have_innodb.inc does the trick.
The InnoDB redo log used to be formatted in blocks of 512 bytes.
The log blocks were encrypted and the checksum was calculated while
holding log_sys.mutex, creating a serious scalability bottleneck.
We remove the fixed-size redo log block structure altogether and
essentially turn every mini-transaction into a log block of its own.
This allows encryption and checksum calculations to be performed
on local mtr_t::m_log buffers, before acquiring log_sys.mutex.
The mutex only protects a memcpy() of the data to the shared
log_sys.buf, as well as the padding of the log, in case the
to-be-written part of the log would not end in a block boundary of
the underlying storage. For now, the "padding" consists of writing
a single NUL byte, to allow recovery and mariadb-backup to detect
the end of the circular log faster.
Like the previous implementation, we will overwrite the last log block
over and over again, until it has been completely filled. It would be
possible to write only up to the last completed block (if no more
recent write was requested), or to write dummy FILE_CHECKPOINT records
to fill the incomplete block, by invoking the currently disabled
function log_pad(). This would require adjustments to some logic around
log checkpoints, page flushing, and shutdown.
An upgrade after a crash of any previous version is not supported.
Logically empty log files from a previous version will be upgraded.
An attempt to start up InnoDB without a valid ib_logfile0 will be
refused. Previously, the redo log used to be created automatically
if it was missing. Only with with innodb_force_recovery=6, it is
possible to start InnoDB in read-only mode even if the log file
does not exist. This allows the contents of a possibly corrupted
database to be dumped.
Because a prepared backup from an earlier version of mariadb-backup
will create a 0-sized log file, we will allow an upgrade from such
log files, provided that the FIL_PAGE_FILE_FLUSH_LSN in the system
tablespace looks valid.
The 512-byte log checkpoint blocks at 0x200 and 0x600 will be replaced
with 64-byte log checkpoint blocks at 0x1000 and 0x2000.
The start of log records will move from 0x800 to 0x3000. This allows us
to use 4096-byte aligned blocks for all I/O in a future revision.
We extend the MDEV-12353 redo log record format as follows.
(1) Empty mini-transactions or extra NUL bytes will not be allowed.
(2) The end-of-minitransaction marker (a NUL byte) will be replaced
with a 1-bit sequence number, which will be toggled each time when the
circular log file wraps back to the beginning.
(3) After the sequence bit, a CRC-32C checksum of all data
(excluding the sequence bit) will written.
(4) If the log is encrypted, 8 bytes will be written before
the checksum and included in it. This is part of the
initialization vector (IV) of encrypted log data.
(5) File names, page numbers, and checkpoint information will not be
encrypted. Only the payload bytes of page-level log will be encrypted.
The tablespace ID and page number will form part of the IV.
(6) For padding, arbitrary-length FILE_CHECKPOINT records may be written,
with all-zero payload, and with the normal end marker and checksum.
The minimum size is 7 bytes, or 7+8 with innodb_encrypt_log=ON.
In mariadb-backup and in Galera snapshot transfer (SST) scripts, we will
no longer remove ib_logfile0 or create an empty ib_logfile0. Server startup
will require a valid log file. When resizing the log, we will create
a logically empty ib_logfile101 at the current LSN and use an atomic rename
to replace ib_logfile0 with it. See the test innodb.log_file_size.
Because there is no mandatory padding in the log file, we are able
to create a dummy log file as of an arbitrary log sequence number.
See the test mariabackup.huge_lsn.
The parameter innodb_log_write_ahead_size and the
INFORMATION_SCHEMA.INNODB_METRICS counter log_padded will be removed.
The minimum value of innodb_log_buffer_size will be increased to 2MiB
(because log_sys.buf will replace recv_sys.buf) and the increment
adjusted to 4096 bytes (the maximum log block size).
The following INFORMATION_SCHEMA.INNODB_METRICS counters will be removed:
os_log_fsyncs
os_log_pending_fsyncs
log_pending_log_flushes
log_pending_checkpoint_writes
The following status variables will be removed:
Innodb_os_log_fsyncs (this is included in Innodb_data_fsyncs)
Innodb_os_log_pending_fsyncs (this was limited to at most 1 by design)
log_sys.get_block_size(): Return the physical block size of the log file.
This is only implemented on Linux and Microsoft Windows for now, and for
the power-of-2 block sizes between 64 and 4096 bytes (the minimum and
maximum size of a checkpoint block). If the block size is anything else,
the traditional 512-byte size will be used via normal file system
buffering.
If the file system buffers can be bypassed, a message like the following
will be issued:
InnoDB: File system buffers for log disabled (block size=512 bytes)
InnoDB: File system buffers for log disabled (block size=4096 bytes)
This has been tested on Linux and Microsoft Windows with both sizes.
On Linux, only enable O_DIRECT on the log for innodb_flush_method=O_DSYNC.
Tests in 3 different environments where the log is stored in a device
with a physical block size of 512 bytes are yielding better throughput
without O_DIRECT. This could be due to the fact that in the event the
last log block is being overwritten (if multiple transactions would
become durable at the same time, and each of will write a small
number of bytes to the last log block), it should be faster to re-copy
data from log_sys.buf or log_sys.flush_buf to the kernel buffer,
to be finally written at fdatasync() time.
The parameter innodb_flush_method=O_DSYNC will imply O_DIRECT for
data files. This option will enable O_DIRECT on the log file on Linux.
It may be unsafe to use when the storage device does not support
FUA (Force Unit Access) mode.
When the server is compiled WITH_PMEM=ON, we will use memory-mapped
I/O for the log file if the log resides on a "mount -o dax" device.
We will identify PMEM in a start-up message:
InnoDB: log sequence number 0 (memory-mapped); transaction id 3
On Linux, we will also invoke mmap() on any ib_logfile0 that resides
in /dev/shm, effectively treating the log file as persistent memory.
This should speed up "./mtr --mem" and increase the test coverage of
PMEM on non-PMEM hardware. It also allows users to estimate how much
the performance would be improved by installing persistent memory.
On other tmpfs file systems such as /run, we will not use mmap().
mariadb-backup: Eliminated several variables. We will refer
directly to recv_sys and log_sys.
backup_wait_for_lsn(): Detect non-progress of
xtrabackup_copy_logfile(). In this new log format with
arbitrary-sized blocks, we can only detect log file overrun
indirectly, by observing that the scanned log sequence number
is not advancing.
xtrabackup_copy_logfile(): On PMEM, do not modify the sequence bit,
because we are not allowed to modify the server's log file, and our
memory mapping is read-only.
trx_flush_log_if_needed_low(): Do not use the callback on pmem.
Using neither flush_lock nor write_lock around PMEM writes seems
to yield the best performance. The pmem_persist() calls may
still be somewhat slower than the pwrite() and fdatasync() based
interface (PMEM mounted without -o dax).
recv_sys_t::buf: Remove. We will use log_sys.buf for parsing.
recv_sys_t::MTR_SIZE_MAX: Replaces RECV_SCAN_SIZE.
recv_sys_t::file_checkpoint: Renamed from mlog_checkpoint_lsn.
recv_sys_t, log_sys_t: Removed many data members.
recv_sys.lsn: Renamed from recv_sys.recovered_lsn.
recv_sys.offset: Renamed from recv_sys.recovered_offset.
log_sys.buf_size: Replaces srv_log_buffer_size.
recv_buf: A smart pointer that wraps log_sys.buf[recv_sys.offset]
when the buffer is being allocated from the memory heap.
recv_ring: A smart pointer that wraps a circular log_sys.buf[] that is
backed by ib_logfile0. The pointer will wrap from recv_sys.len
(log_sys.file_size) to log_sys.START_OFFSET. For the record that
wraps around, we may copy file name or record payload data to
the auxiliary buffer decrypt_buf in order to have a contiguous
block of memory. The maximum size of a record is less than
innodb_page_size bytes.
recv_sys_t::parse(): Take the smart pointer as a template parameter.
Do not temporarily add a trailing NUL byte to FILE_ records, because
we are not supposed to modify the memory-mapped log file. (It is
attached in read-write mode already during recovery.)
recv_sys_t::parse_mtr(): Wrapper for recv_sys_t::parse().
recv_sys_t::parse_pmem(): Like parse_mtr(), but if PREMATURE_EOF would be
returned on PMEM, use recv_ring to wrap around the buffer to the start.
mtr_t::finish_write(), log_close(): Do not enforce log_sys.max_buf_free
on PMEM, because it has no meaning on the mmap-based log.
log_sys.write_to_buf: Count writes to log_sys.buf. Replaces
srv_stats.log_write_requests and export_vars.innodb_log_write_requests.
Protected by log_sys.mutex. Updated consistently in log_close().
Previously, mtr_t::commit() conditionally updated the count,
which was inconsistent.
log_sys.write_to_log: Count swaps of log_sys.buf and log_sys.flush_buf,
for writing to log_sys.log (the ib_logfile0). Replaces
srv_stats.log_writes and export_vars.innodb_log_writes.
Protected by log_sys.mutex.
log_sys.waits: Count waits in append_prepare(). Replaces
srv_stats.log_waits and export_vars.innodb_log_waits.
recv_recover_page(): Do not unnecessarily acquire
log_sys.flush_order_mutex. We are inserting the blocks in arbitary
order anyway, to be adjusted in recv_sys.apply(true).
We will change the definition of flush_lock and write_lock to
avoid potential false sharing. Depending on sizeof(log_sys) and
CPU_LEVEL1_DCACHE_LINESIZE, the flush_lock and write_lock could
share a cache line with each other or with the last data members
of log_sys.
Thanks to Matthias Leich for providing https://rr-project.org traces
for various failures during the development, and to
Thirunarayanan Balathandayuthapani for his help in debugging
some of the recovery code. And thanks to the developers of the
rr debugger for a tool without which extensive changes to InnoDB
would be very challenging to get right.
Thanks to Vladislav Vaintroub for useful feedback and
to him, Axel Schwenke and Krunal Bauskar for testing the performance.
This is a complete rewrite of DROP TABLE, also as part of other DDL,
such as ALTER TABLE, CREATE TABLE...SELECT, TRUNCATE TABLE.
The background DROP TABLE queue hack is removed.
If a transaction needs to drop and create a table by the same name
(like TRUNCATE TABLE does), it must first rename the table to an
internal #sql-ib name. No committed version of the data dictionary
will include any #sql-ib tables, because whenever a transaction
renames a table to a #sql-ib name, it will also drop that table.
Either the rename will be rolled back, or the drop will be committed.
Data files will be unlinked after the transaction has been committed
and a FILE_RENAME record has been durably written. The file will
actually be deleted when the detached file handle returned by
fil_delete_tablespace() will be closed, after the latches have been
released. It is possible that a purge of the delete of the SYS_INDEXES
record for the clustered index will execute fil_delete_tablespace()
concurrently with the DDL transaction. In that case, the thread that
arrives later will wait for the other thread to finish.
HTON_TRUNCATE_REQUIRES_EXCLUSIVE_USE: A new handler flag.
ha_innobase::truncate() now requires that all other references to
the table be released in advance. This was implemented by Monty.
ha_innobase::delete_table(): If CREATE TABLE..SELECT is detected,
we will "hijack" the current transaction, drop the table in
the current transaction and commit the current transaction.
This essentially fixes MDEV-21602. There is a FIXME comment about
making the check less failure-prone.
ha_innobase::truncate(), ha_innobase::delete_table():
Implement a fast path for temporary tables. We will no longer allow
temporary tables to use the adaptive hash index.
dict_table_t::mdl_name: The original table name for the purpose of
acquiring MDL in purge, to prevent a race condition between a
DDL transaction that is dropping a table, and purge processing
undo log records of DML that had executed before the DDL operation.
For #sql-backup- tables during ALTER TABLE...ALGORITHM=COPY, the
dict_table_t::mdl_name will differ from dict_table_t::name.
dict_table_t::parse_name(): Use mdl_name instead of name.
dict_table_rename_in_cache(): Update mdl_name.
For the internal FTS_ tables of FULLTEXT INDEX, purge would
acquire MDL on the FTS_ table name, but not on the main table,
and therefore it would be able to run concurrently with a
DDL transaction that is dropping the table. Previously, the
DROP TABLE queue hack prevented a race between purge and DDL.
For now, we introduce purge_sys.stop_FTS() to prevent purge from
opening any table, while a DDL transaction that may drop FTS_
tables is in progress. The function fts_lock_table(), which will
be invoked before the dictionary is locked, will wait for
purge to release any table handles.
trx_t::drop_table_statistics(): Drop statistics for the table.
This replaces dict_stats_drop_index(). We will drop or rename
persistent statistics atomically as part of DDL transactions.
On lock conflict for dropping statistics, we will fail instantly
with DB_LOCK_WAIT_TIMEOUT, because we will be holding the
exclusive data dictionary latch.
trx_t::commit_cleanup(): Separated from trx_t::commit_in_memory().
Relax an assertion around fts_commit() and allow DB_LOCK_WAIT_TIMEOUT
in addition to DB_DUPLICATE_KEY. The call to fts_commit() is
entirely misplaced here and may obviously break the consistency
of transactions that affect FULLTEXT INDEX. It needs to be fixed
separately.
dict_table_t::n_foreign_key_checks_running: Remove (MDEV-21175).
The counter was a work-around for missing meta-data locking (MDL)
on the SQL layer, and not really needed in MariaDB.
ER_TABLE_IN_FK_CHECK: Replaced with ER_UNUSED_28.
HA_ERR_TABLE_IN_FK_CHECK: Remove.
row_ins_check_foreign_constraints(): Do not acquire
dict_sys.latch either. The SQL-layer MDL will protect us.
This was reviewed by Thirunarayanan Balathandayuthapani
and tested by Matthias Leich.
The debug parameter innodb_simulate_comp_failures injected compression
failures for ROW_FORMAT=COMPRESSED tables, breaking the pre-existing
logic that I had implemented in the InnoDB Plugin for MySQL 5.1 to prevent
compressed page overflows. A much better check is already achieved by
defining UNIV_ZIP_COPY at the compilation time.
(Only UNIV_ZIP_DEBUG is part of cmake -DWITH_INNODB_EXTRA_DEBUG=ON.)
The InnoDB internal tables SYS_TABLESPACES and SYS_DATAFILES as well as the
INFORMATION_SCHEMA views INNODB_SYS_TABLESPACES and INNODB_SYS_DATAFILES
were introduced in MySQL 5.6 for no good reason in
mysql/mysql-server/commit/e9255a22ef16d612a8076bc0b34002bc5a784627
when the InnoDB support for the DATA DIRECTORY attribute was introduced.
The file system should be the authoritative source of information on files.
Storing information about file system paths in the file system (symlinks,
or even the .isl files that were unfortunately chosen as the solution) is
sufficient. If information is additionally stored in some hidden tables
inside the InnoDB system tablespace, everything unnecessarily becomes
more complicated, because more copies of data mean more opportunity
for the copies to be out of sync, and because modifying the data in
the system tablespace in the desired way might not be possible at all
without modifying the InnoDB source code. So, the copy in the system
tablespace basically is a redundant, non-authoritative source of
information.
We will stop creating or accessing the system tables SYS_TABLESPACES
and SYS_DATAFILES.
We will also remove the view
INFORMATION_SCHEMA.INNODB_SYS_DATAFILES along with SYS_DATAFILES.
The view
INFORMATION_SCHEMA.INNODB_SYS_TABLESPACES will be repurposed
to directly reflect fil_system.space_list. The column
PAGE_SIZE, which would always contain the value of
the GLOBAL read-only variable innodb_page_size, is
removed. The column ZIP_PAGE_SIZE, which would actually
contain the physical page size of a page, is renamed to
PAGE_SIZE. Finally, a new column FILENAME is added, as a
replacement of SYS_DATAFILES.PATH.
This will also
address MDEV-21801 (files that were created before upgrading
to MySQL 5.6 or MariaDB 10.0 or later were never registered
in SYS_TABLESPACES or SYS_DATAFILES) and
MDEV-21801 (information about the system tablespace is not stored
in SYS_TABLESPACES or SYS_DATAFILES).
Let us introduce a dummy variable innodb_max_purge_lag_wait
for waiting that the InnoDB history list length is below
the user-specified limit. Specifically,
SET GLOBAL innodb_max_purge_lag_wait=0;
should wait for all history to be purged. This could be useful
when upgrading from an older version to MariaDB 10.3 or later,
to avoid hitting MDEV-15912.
Note: the history cannot be purged if there exist transactions
that may see old versions.
Reviewed by: Vladislav Vaintroub
innobase_pk_order_preserved(): Treat an added AUTO_INCREMENT
column in the same way as an added existing column.
In either case, the column values are not guaranteed to
be constant, and thus the ordering may change if such a column
is added before any existing PRIMARY KEY columns.
prepare_inplace_alter_table_dict(): Initialize
dict_table_t::persistent_autoinc before invoking
innobase_pk_order_preserved().
Now there can be only one log file instead of several which
logically work as a single file.
Possible names of redo log files: ib_logfile0,
ib_logfile101 (for just created one)
innodb_log_fiels_in_group: value of this variable is not used
by InnoDB. Possible values are still 1..100, to not break upgrade
LOG_FILE_NAME: add constant of value "ib_logfile0"
LOG_FILE_NAME_PREFIX: add constant of value "ib_logfile"
get_log_file_path(): convenience function that returns full
path of a redo log file
SRV_N_LOG_FILES_MAX: removed
srv_n_log_files: we can't remove this for compatibility reasons,
but now server doesn't use this variable
log_sys_t::file::fd: now just one, not std::vector
log_sys_t::log_capacity: removed word 'group'
find_and_check_log_file(): part of logic from huge srv_start()
moved here
recv_sys_t::files: file descriptors of redo log files.
There can be several of those in case we're upgrading
from older MariaDB version.
recv_sys_t::remove_extra_log_files: whether to remove
ib_logfile{1,2,3...} after successfull upgrade.
recv_sys_t::read(): open if needed and read from one
of several log files
recv_sys_t::files_size(): open if needed and return files count
redo_file_sizes_are_correct(): check that redo log files
sizes are equal. Just to log an error for a user.
Corresponding check was moved from srv0start.cc
namespace deprecated: put all deprecated variables here to
prevent usage of it by us, developers
