The patch fixes two test failures:
- on slow builders, sometimes a connection attempt which should
fail due to the exceeded number of thread_pool_max_threads
actually succeeds;
- on even slow builders, MTR sometimes cannot establish the
initial connection, and check-testcase fails prior to the
test start
The problem with check-testcase was caused by connect-timeout=2
which was set for all clients in the test config file. On slow
builders it might be not enough.
There is no way to override it for the pre-test check, so it needed
to be substantially increased or removed.
The other problem was caused by a race condition between sleeps
that the test performs in existing connections and the connect
timeout for the connection attempt which was expected to fail.
If sleeps finished before the connect-timeout was exceeded, it
would allow the connection to succeed.
To solve each problem without making the other one worse,
connect-timeout should be configured dynamically during the test.
Due to the nature of the test (all connections must be busy
at the moment when we need to change the timeout, and cannot execute
SET GLOBAL ...), it needs to be done independently from the server.
The solution:
- recognize 'connect_timeout' as a connection option in mysqltest's
"connect" command;
- remove connect-timeout from the test configuration file;
- use the new connect_timeout option for those connections which
are expected to fail;
- re-arrange the test flow to allow running a huge SLEEP
without affecting the test execution time (because it would be
interrupted after the main test flow is finished).
The test is still subject to false negatives, e.g. if the connection
fails due to timeout rather than due to the exceeded number of
allowed threads, or if the connection on extra port succeeds due
to a race condition and not because the special logic for the extra
port. But those false negatives have always been possible there
on slow builders, they should not be critical because faster builders
should catch such failures if they appear.
mysqldump/mysql_install_db.exe fail
The bug is described in
https://connect.microsoft.com/VisualStudio/Feedback/Details/1902345
When reading from a pipe in text mode, using CRT function such as fread(),
some newlines may be lost. Workaround is to use binary mode on reading side
and if necessary, replace \r\n with \n.
The issue was that when running with valgrind the wait for master_pos_Wait()
was not long enough.
This patch also fixes two other failures that could affect rpl_mdev6020:
- check_if_conflicting_replication_locks() didn't properly check domains
- 'did_mark_start_commit' was after signals to other threads was sent which could
get the variable read too early.
Fix test whether process is alive in mysqltest.
Also fix SHUT_RD definition on Windows to be SD_RECEIVE.
SD_BOTH was used instead prior to this patch, and this would
occasionally make mysql_shutdown() fail - when the socket for the current connection
is not able send the COM_SHUTDOWN response anymore.
- Removed some QQ markers
- Removed some rows not compatible with valgrind 3.9.0
- Made mysql_install_db.sh more silent by default. --verbose now gives more information
- Added assert that auto-increment doesn't generate 0 (safety)
- Removed thd->set_time() in some places as it's set in init_for_queries()
- Fixed some --big tests in tokudb
- Fixed a bug in mysql_client_test.cc where sql_mode was not properly reset
cherry-pick f1daf9ce from 10.0 branch
-------------------------------------
Fix build failures caused by new C runtime library
- isnan, snprintf, struct timespec are now defined, attempt to
redefine them leads
- P_tmpdir, tzname are no more defined
- lfind() and lsearch() in lf_hash.c had to be renamed, declaration
conflicts with some C runtime functions with the same name declared in
a header included by stdlib.h
Also fix couple of annoying warnings :
- remove #define NOMINMAX from config.h to avoid "redefined" compiler
warnings(NOMINMAX is already in compile flags)
- disable incremental linker in Debug as well (feature not used much
and compiler crashes often)
Also simplify package building with Wix, require Wix 3.9 or later
(VS2015 is not compatible with old Wix 3.5/3.6)
Fix test whether process is alive in mysqltest.
Also fix SHUT_RD definition on Windows to be SD_RECEIVE.
SD_BOTH was used instead prior to this patch, and this would
occasionally make mysql_shutdown() fail - when the socket for the current connection
is not able send the COM_SHUTDOWN response anymore.
Fix build failures caused by new C runtime library
- isnan, snprintf, struct timespec are now defined, attempt to
redefine them leads
- P_tmpdir, tzname are no more defined
- lfind() and lsearch() in lf_hash.c had to be renamed, declaration
conflicts with some C runtime functions with the same name declared in
a header included by stdlib.h
Also fix couple of annoying warnings :
- remove #define NOMINMAX from config.h to avoid "redefined" compiler
warnings(NOMINMAX is already in compile flags)
- disable incremental linker in Debug as well (feature not used much
and compiler crashes often)
Also simplify package building with Wix, require Wix 3.9 or later
(VS2015 is not compatible with old Wix 3.5/3.6)
- If run with valgrind, mysqltest will now wait longer when syncronizing slave with master
- Ensure that we wait with cleanup() until slave thread has stopped.
- Added signal_thd_deleted() to signal close_connections() that all THD's has been freed.
- Check in handle_fatal_signal() that we don't use variables that has been freed.
- Increased some timeouts when run with --valgrind
Other things:
- Fixed wrong test in one_thread_per_connection_end() if galera is used.
- Removed not needed calls to THD_CHECK_SENTRY() when we are calling 'delete thd'.
As the MF_THREAD_SPECIFIC was introduced to the alloc_root's and
the prealloc added to the statement::mem_root and statement::result.alloc, we have to adjust
the embedded server to it. The preallocation was removed for the embedded server as it
makes no sence for it. The msyqltest should free the statement inside the proper thead to
make the memory statistics happy.
Part 1: first 2 cases of valgrind complain. context_analysis_only can be used on non-started LEX (opening tables)
obviouse fixes in DBUG and is_lex_started assignment.
in when using vio->read_timeout (and write_timeout) to set
timeouts of a new vio, as in:
vio_timeout(vio, 0, old_vio.read_timeout)
vio_timeout(vio, 0, old_vio.write_timeout)
remember that timeouts are stored in ms, but vio_timeout()'s
argument is in seconds.
The problem was that my_hash_sort didn't properly delete end-space characters properly, so strings that should compare
identically was seen as different strings. (Space was handled correctly, but not NBSP)
This caused duplicate key errors when a heap table was converted to Aria as part of overflow in group by.
Fixed by removing all characters that compares as end space when creating a hash.
Other things:
- Fixed that --sorted_results also works for errors in mysqltest.
- Speed up hash by not comparing strings that has different hash.
- Speed up many my_hash_sort functions by using registers to calculate hash instead of pointers.
This was previously done for some functions, but not for all.
- Made a macro of the hash function, to simplify code and to be able to experiment with new hash functions.
client/mysqltest.cc:
Fixed that --sorted_results also works for error messages.
mysql-test/r/ctype_partitions.result:
New test to ensure that partitions on hash works
mysql-test/suite/multi_source/gtid.result:
Updated result
mysql-test/suite/multi_source/gtid.test:
Test that --sorted_result works for error messages
mysql-test/suite/multi_source/gtid_ignore_duplicates.result:
Updated result
mysql-test/suite/multi_source/gtid_ignore_duplicates.test:
Updated result
mysql-test/suite/multi_source/load_data.result:
Updated result
mysql-test/suite/multi_source/load_data.test:
Updated result
mysql-test/t/ctype_partitions.test:
New test to ensure that partitions on hash works
storage/heap/hp_write.c:
Speed up hash by not comparing strings that has different hash.
storage/maria/ma_check.c:
Extra debug
strings/ctype-bin.c:
Use macro for hash function
strings/ctype-latin1.c:
Use macro for hash function
Use registers to calculate hash (speedup)
strings/ctype-mb.c:
Use macro for hash function
Use registers to calculate hash (speedup)
strings/ctype-simple.c:
Use macro for hash function
Use same variable names as in other my_hash_sort functions.
Update my_hash_sort_simple() to properly remove end space (patch by Bar)
strings/ctype-uca.c:
Ignore duplicated space inside strings and end space in my_hash_sort_uca(). This fixed MDEV-6255
Use macro for hash function
Use registers to calculate hash (speedup)
strings/ctype-ucs2.c:
Use macro for hash function
Use registers to calculate hash (speedup)
strings/ctype-utf8.c:
Use macro for hash function
Use registers to calculate hash (speedup)
strings/strings_def.h:
Made a macro of the hash function, to simplify code and to be able to experiment with new hash functions.
