Atomic CREATE OR REPLACE allows to keep an old table intact if the
command fails or during the crash. That is done by renaming the
original table to temporary name, as a backup and restoring it if the
CREATE fails. When the command is complete and logged the backup
table is deleted.
Atomic replace algorithm
Two DDL chains are used for CREATE OR REPLACE:
ddl_log_state_create (C) and ddl_log_state_rm (D).
1. (C) Log rename of ORIG to TMP table (Rename TMP to original).
2. Rename orignal to TMP.
3. (C) Log CREATE_TABLE_ACTION of ORIG (drops ORIG);
4. Do everything with ORIG (like insert data)
5. (D) Log drop of TMP
6. Write query to binlog (this marks (C) to be closed in
case of failure)
7. Execute drop of TMP through (D)
8. Close (C) and (D)
If there is a failure before 6) we revert the changes in (C)
Chain (D) is only executed if 6) succeded (C is closed on
crash recovery).
Foreign key errors will be found at the 1) stage.
Additional notes
- CREATE TABLE without REPLACE and temporary tables is not affected
by this commit.
set @@drop_before_create_or_replace=1 can be used to
get old behaviour where existing tables are dropped
in CREATE OR REPLACE.
- CREATE TABLE is reverted if binlogging the query fails.
- Engines having HTON_EXPENSIVE_RENAME flag set are not affected by
this commit. Conflicting tables marked with this flag will be
deleted with CREATE OR REPLACE.
- Replication execution is not affected by this commit.
- Replication will first drop the conflicting table and then
creating the new one.
- CREATE TABLE .. SELECT XID usage is fixed and now there is no need
to log DROP TABLE via DDL_CREATE_TABLE_PHASE_LOG (see comments in
do_postlock()). XID is now correctly updated so it disables
DDL_LOG_DROP_TABLE_ACTION. Note that binary log is flushed at the
final stage when the table is ready. So if we have XID in the
binary log we don't need to drop the table.
- Three variations of CREATE OR REPLACE handled:
1. CREATE OR REPLACE TABLE t1 (..);
2. CREATE OR REPLACE TABLE t1 LIKE t2;
3. CREATE OR REPLACE TABLE t1 SELECT ..;
- Test case uses 6 combinations for engines (aria, aria_notrans,
myisam, ib, lock_tables, expensive_rename) and 2 combinations for
binlog types (row, stmt). Combinations help to check differences
between the results. Error failures are tested for the above three
variations.
- expensive_rename tests CREATE OR REPLACE without atomic
replace. The effect should be the same as with the old behaviour
before this commit.
- Triggers mechanism is unaffected by this change. This is tested in
create_replace.test.
- LOCK TABLES is affected. Lock restoration must be done after new
table is created or TMP is renamed back to ORIG
- Moved ddl_log_complete() from send_eof() to finalize_ddl(). This
checkpoint was not executed before for normal CREATE TABLE but is
executed now.
- CREATE TABLE will now rollback also if writing to the binary
logging failed. See rpl_gtid_strict.test
backup ddl log changes
- In case of a successfull CREATE OR REPLACE we only log
the CREATE event, not the DROP TABLE event of the old table.
ddl_log.cc changes
ddl_log_execute_action() now properly return error conditions.
ddl_log_disable_entry() added to allow one to disable one entry.
The entry on disk is still reserved until ddl_log_complete() is
executed.
On XID usage
Like with all other atomic DDL operations XID is used to avoid
inconsistency between master and slave in the case of a crash after
binary log is written and before ddl_log_state_create is closed. On
recovery XIDs are taken from binary log and corresponding DDL log
events get disabled. That is done by
ddl_log_close_binlogged_events().
On linking two chains together
Chains are executed in the ascending order of entry_pos of execute
entries. But entry_pos assignment order is undefined: it may assign
bigger number for the first chain and then smaller number for the
second chain. So the execution order in that case will be reverse:
second chain will be executed first.
To avoid that we link one chain to another. While the base chain
(ddl_log_state_create) is active the secondary chain
(ddl_log_state_rm) is not executed. That is: only one chain can be
executed in two linked chains.
The interface ddl_log_link_chains() was defined in "MDEV-22166
ddl_log_write_execute_entry() extension".
Atomic info parameters in HA_CREATE_INFO
Many functions in CREATE TABLE pass the same parameters. These
parameters are part of table creation info and should be in
HA_CREATE_INFO (or whatever). Passing parameters via single
structure is much easier for adding new data and
refactoring.
Aria changes:
- Fixed issue in Aria engine with CREATE + locked tables
that data was not properly commited in some cases in
case of crashes.
InnoDB related changes (by Marko Mäkelä):
- table_name_t::is_create_or_replace(): A new predicate to check for
CREATE OR REPLACE TABLE will rename an old table to
and eventually drop after creating the replacement.
- dict_table_t::parse_name(): Do acquire MDL on #sql-create- names
for partitioned tables.
- dict_table_rename_in_cache(): On CREATE OR REPLACE TABLE ... SELECT,
forget the original dict_table_t::mdl_name so that purge will
acquire MDL on the #sql-create- name instead. In this way, the
MDL_EXCLUSIVE that the CREATE OR REPLACE TABLE holds on the
user-visible name will not unnecessarily block any purge of old history
until the very end when the #sql-create- table will be dropped.
- ha_innobase::delete_table(): Do not check FOREIGN KEY consistency
when dropping an #sql-create- table.
- row_rename_table_for_mysql(): Update SYS_FOREIGN.ID also
when renaming to #sql-create- in order to avoid any
duplicate key error when CREATE OR REPLACE TABLE is
creating some FOREIGN KEY constraints by names
that existed in the old table.
Other changes:
- Removed some auto variables in log.cc for better code readability.
- Fixed old bug that CREATE ... SELECT would not be able to auto repair
a table that is part of the SELECT.
- Marked MyISAM that it does not support ROLLBACK (not required but
done for better consistency with other engines).
- maria_create_trn_for_mysql() does not register a new transaction
handler for commits. This was needed to ensure create or replace
will not end with an active transaction.
- We do not get anymore warnings about "Engine not supporting atomic
create" when doing a legal CREATE OR REPLACE on a table with
foreign key constraints.
- Updated VIDEX engine flags to disable CREATE SEQUENCE.
- Removed mysql_mutex_unlock(&LOCK_gdl) / mysql_mutex_lock(&LOCK_gdl)
around calls to binlog as these are unsafe. The binlog code uses
global variables that needs protection from other caller.
- EITS data is preserved if create or replace fails if
drop_before_create_or_replace=OFF. If ON, then create or replace
will drop EITS before the drop of the original table (as before).
- Using CREATE OR REPLACE on a encrypted table that the user cannot
decrypt will fail instead of replacing the encrypted table.
The encrypted table will unchanged.
Known issues:
- One cannot use create or replace on an InnoDB tables that has foreign
key references point to it
- CREATE OR REPLACE TEMPORARY table is not full atomic. Any conflicting
table will always be dropped before creating a new one. (Old behaviour).
Bug fixes related to this MDEV:
MDEV-36435 Assertion failure in finalize_locked_tables()
MDEV-36439 Assertion `thd_arg->lex->sql_command != SQLCOM_CREATE_SEQUENCE...
MDEV-36498 Failed CoR in non-atomic mode no longer generates DROP in RBR...
MDEV-36508 Temporary files #sql-create-....frm occasionally stay after
crash recovery
MDEV-38479 Crash in CREATE OR REPLACE SEQUENCE when new sequence cannot
be created
MDEV-36497 Assertion failure after atomic CoR with Aria under lock in
transactional context
MDEV-36501 EITS data is lost after failed attempt to CREATE OR REPLACE
table
MDEV-36493 Atomic CREATE OR REPLACE ... SELECT blocks InnoDB purge
MDEV-39367 MSAN/valgrind errors in temp_file_size_cb_func,
main.tmp_space_usage fails
MDEV-39446 Atomic CREATE OR REPLACE fails if a table cannot be decrypted
MDEV-40776 Atomic CREATE OR REPLACE silently breaks the foreign key
MDEV-40765 Assertion `"unexpected references" == 0' failed upon failing
CREATE OR REPLACE
MDEV-40994 Atomic CoR: Transaction not registered for MariaDB 2PC, but
transaction is active
Reverted commits:
- MDEV-36685 "CREATE-SELECT may lose in binlog side-effects of
stored-routine" as it did not take into account that it safe to
clear binlogs if the created table is non transactional and there
are no other non transactional tables used.
This was done because it caused extra logging when it is not
needed (not using any non transactional tables) and it also did
not solve side effects when using statement based loggging.
CONVERT ... PARTITION passed user-specified partition names to
create_partition_name() with translate=FALSE, so names needing
filename escaping (e.g. `foo-bar`) didn't match the on-disk file.
Pass TRUE to encode them.
Remove not anymore used
bool ddl_log_write_execute_entry(uint first_entry,
DDL_LOG_MEMORY_ENTRY **active_entry)
Simple transformations, no logic changes.
* rpl.rpl_system_versioning_partitions updated for MDEV-32188
* innodb.row_size_error_log_warnings_3 changed error for MDEV-33658
(checks are done in a different order)
MDEV-28127 did is_equal() which compared vcol expressions
literally. But another table vcol expression is not equal because of
different table name.
We implement another comparison method is_identical() which respects
different table name in vcol comparison. If any field item points to
table_A and compared field item points to table_B, such items are
treated as equal in (table_A, table_B) comparison. This is done by
cloning table_B expression and renaming any table_B entries to table_A
in it.
This patch also fixes:
MDEV-33050 Build-in schemas like oracle_schema are accent insensitive
MDEV-33084 LASTVAL(t1) and LASTVAL(T1) do not work well with lower-case-table-names=0
MDEV-33085 Tables T1 and t1 do not work well with ENGINE=CSV and lower-case-table-names=0
MDEV-33086 SHOW OPEN TABLES IN DB1 -- is case insensitive with lower-case-table-names=0
MDEV-33088 Cannot create triggers in the database `MYSQL`
MDEV-33103 LOCK TABLE t1 AS t2 -- alias is not case sensitive with lower-case-table-names=0
MDEV-33109 DROP DATABASE MYSQL -- does not drop SP with lower-case-table-names=0
MDEV-33110 HANDLER commands are case insensitive with lower-case-table-names=0
MDEV-33119 User is case insensitive in INFORMATION_SCHEMA.VIEWS
MDEV-33120 System log table names are case insensitive with lower-cast-table-names=0
- Removing the virtual function strnncoll() from MY_COLLATION_HANDLER
- Adding a wrapper function CHARSET_INFO::streq(), to compare
two strings for equality. For now it calls strnncoll() internally.
In the future it will turn into a virtual function.
- Adding new accent sensitive case insensitive collations:
- utf8mb4_general1400_as_ci
- utf8mb3_general1400_as_ci
They implement accent sensitive case insensitive comparison.
The weight of a character is equal to the code point of its
upper case variant. These collations use Unicode-14.0.0 casefolding data.
The result of
my_charset_utf8mb3_general1400_as_ci.strcoll()
is very close to the former
my_charset_utf8mb3_general_ci.strcasecmp()
There is only a difference in a couple dozen rare characters, because:
- the switch from "tolower" to "toupper" comparison, to make
utf8mb3_general1400_as_ci closer to utf8mb3_general_ci
- the switch from Unicode-3.0.0 to Unicode-14.0.0
This difference should be tolarable. See the list of affected
characters in the MDEV description.
Note, utf8mb4_general1400_as_ci correctly handles non-BMP characters!
Unlike utf8mb4_general_ci, it does not treat all BMP characters
as equal.
- Adding classes representing names of the file based database objects:
Lex_ident_db
Lex_ident_table
Lex_ident_trigger
Their comparison collation depends on the underlying
file system case sensitivity and on --lower-case-table-names
and can be either my_charset_bin or my_charset_utf8mb3_general1400_as_ci.
- Adding classes representing names of other database objects,
whose names have case insensitive comparison style,
using my_charset_utf8mb3_general1400_as_ci:
Lex_ident_column
Lex_ident_sys_var
Lex_ident_user_var
Lex_ident_sp_var
Lex_ident_ps
Lex_ident_i_s_table
Lex_ident_window
Lex_ident_func
Lex_ident_partition
Lex_ident_with_element
Lex_ident_rpl_filter
Lex_ident_master_info
Lex_ident_host
Lex_ident_locale
Lex_ident_plugin
Lex_ident_engine
Lex_ident_server
Lex_ident_savepoint
Lex_ident_charset
engine_option_value::Name
- All the mentioned Lex_ident_xxx classes implement a method streq():
if (ident1.streq(ident2))
do_equal();
This method works as a wrapper for CHARSET_INFO::streq().
- Changing a lot of "LEX_CSTRING name" to "Lex_ident_xxx name"
in class members and in function/method parameters.
- Replacing all calls like
system_charset_info->coll->strcasecmp(ident1, ident2)
to
ident1.streq(ident2)
- Taking advantage of the c++11 user defined literal operator
for LEX_CSTRING (see m_strings.h) and Lex_ident_xxx (see lex_ident.h)
data types. Use example:
const Lex_ident_column primary_key_name= "PRIMARY"_Lex_ident_column;
is now a shorter version of:
const Lex_ident_column primary_key_name=
Lex_ident_column({STRING_WITH_LEN("PRIMARY")});
Under terms of MDEV 27490 we'll add support for non-BMP identifiers
and upgrade casefolding information to Unicode version 14.0.0.
In Unicode-14.0.0 conversion to lower and upper cases can increase octet length
of the string, so conversion won't be possible in-place any more.
This patch removes virtual functions performing in-place casefolding:
- my_charset_handler_st::casedn_str()
- my_charset_handler_st::caseup_str()
and fixes the code to use the non-inplace functions instead:
- my_charset_handler_st::casedn()
- my_charset_handler_st::caseup()
Specifically:
Revert "MDEV-29664 Assertion `!n_mysql_tables_in_use' failed in innobase_close_connection"
This reverts commit ba875e9396.
Revert "MDEV-29620 Assertion `next_insert_id == 0' failed in handler::ha_external_lock"
This reverts commit aa08a7442a.
Revert "MDEV-29628 Memory leak after CREATE OR REPLACE with foreign key"
This reverts commit c579d66ba6.
Revert "MDEV-29609 create_not_windows test fails with different result"
This reverts commit cb583b2f1b.
Revert "MDEV-29544 SIGSEGV in HA_CREATE_INFO::finalize_locked_tables"
This reverts commit dcd66c3814.
Revert "MDEV-28933 CREATE OR REPLACE fails to recreate same constraint name"
This reverts commit cf6c517632.
Revert "MDEV-28933 Moved RENAME_CONSTRAINT_IDS to include/sql_funcs.h"
This reverts commit f1e1c1335b.
Revert "MDEV-28956 Locking is broken if CREATE OR REPLACE fails under LOCK TABLES"
This reverts commit a228ec80e3.
Revert "MDEV-25292 gcol.gcol_bugfixes --ps fix"
This reverts commit 24fff8267d.
Revert "MDEV-25292 Disable atomic replace for slave-generated or-replace"
This reverts commit 2af15914cb.
Revert "MDEV-25292 backup_log improved"
This reverts commit 34398a20b5.
Revert "MDEV-25292 Atomic CREATE OR REPLACE TABLE"
This reverts commit 93c8252f02.
Revert "MDEV-25292 Table_name class for (db, table_name, alias)"
This reverts commit d145dda9c7.
Revert "MDEV-25292 ha_table_exists() cleanup and improvement"
This reverts commit 409b8a86de.
Revert "MDEV-25292 Cleanups"
This reverts commit 595dad83ad.
Revert "MDEV-25292 Refactoring: moved select_field_count into Alter_info."
This reverts commit f02af1d229.
Making changes to wsrep_mysqld.h causes large parts of server code to
be recompiled. The reason is that wsrep_mysqld.h is included by
sql_class.h, even tough very little of wsrep_mysqld.h is needed in
sql_class.h. This commit introduces a new header file, wsrep_on.h,
which is meant to be included from sql_class.h, and contains only
macros and variable declarations used to determine whether wsrep is
enabled.
Also, header wsrep.h should only contain definitions that are also
used outside of sql/. Therefore, move WSREP_TO_ISOLATION* and
WSREP_SYNC_WAIT macros to wsrep_mysqld.h.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
ER_CHECK_NO_SUCH_TABLE was raised because a view does not have
the corresponding TABLE instance connected to TABLE_LIST and the
server interprets the absence as the absence of the table itself.
To fix the problem, we add a check to ensure that the target table
to be swapped with a partition is not a view.
Reviewed by: Nayuta Yanagisawa
Also fixes
MDEV-27782 Wrong columns when using table level `CHARACTER SET utf8mb4 COLLATE DEFAULT`
MDEV-28644 Unexpected error on ALTER TABLE t1 CONVERT TO CHARACTER SET utf8mb3, DEFAULT CHARACTER SET utf8mb4
When trying to execute ALTER TABLE EXCHANGE PARTITION with different
definitions, assertion
table->s->db_create_options == part_table->s->db_create_options
failed in compare_table_with_partition().
However, this execution should not be allowed since executing
'exchange partition' requires the identical structure of the two tables.
To fix the problem, I deleted the assertion code and added code that
returns an error that indicates tables have different definitions.
Reviewed By: Nayuta Yanagisawa
Syntax for CONVERT TABLE
ALTER TABLE tbl_name CONVERT TABLE tbl_name TO PARTITION partition_name partition_spec
Examples:
ALTER TABLE t1 CONVERT TABLE tp2 TO PARTITION p2 VALUES LESS THAN MAX_VALUE();
New ALTER_PARTITION_CONVERT_IN command for
fast_alter_partition_table() is done in alter_partition_convert_in()
function which basically does ha_rename_table().
Table structure and data check is basically the same as in EXCHANGE
PARTITION command. And these are done by
compare_table_with_partition() and check_table_data().
Atomic DDL is done by the scheme from MDEV-22166 (see the
corresponding commit message). The only differnce is that it also has
to drop source table frm and that is done by WFRM_DROP_CONVERTED_FROM.
Initial patch was done by Dmitry Shulga <dmitry.shulga@mariadb.com>
- Major rewrite of ddl_log.cc and ddl_log.h
- ddl_log.cc described in the beginning how the recovery works.
- ddl_log.log has unique signature and is dynamic. It's easy to
add more information to the header and other ddl blocks while still
being able to execute old ddl entries.
- IO_SIZE for ddl blocks is now dynamic. Can be changed without affecting
recovery of old logs.
- Code is more modular and is now usable outside of partition handling.
- Renamed log file to dll_recovery.log and added option --log-ddl-recovery
to allow one to specify the path & filename.
- Added ddl_log_entry_phase[], number of phases for each DDL action,
which allowed me to greatly simply set_global_from_ddl_log_entry()
- Changed how strings are stored in log entries, which allows us to
store much more information in a log entry.
- ddl log is now always created at start and deleted on normal shutdown.
This simplices things notable.
- Added probes debug_crash_here() and debug_simulate_error() to simply
crash testing and allow crash after a given number of times a probe
is executed. See comments in debug_sync.cc and rename_table.test for
how this can be used.
- Reverting failed table and view renames is done trough the ddl log.
This ensures that the ddl log is tested also outside of recovery.
- Added helper function 'handler::needs_lower_case_filenames()'
- Extend binary log with Q_XID events. ddl log handling is using this
to check if a ddl log entry was logged to the binary log (if yes,
it will be deleted from the log during ddl_log_close_binlogged_events()
- If a DDL entry fails 3 time, disable it. This is to ensure that if
we have a crash in ddl recovery code the server will not get stuck
in a forever crash-restart-crash loop.
mysqltest.cc changes:
- --die will now replace $variables with their values
- $error will contain the error of the last failed statement
storage engine changes:
- maria_rename() was changed to be more robust against crashes during
rename.
Changes:
- To detect automatic strlen() I removed the methods in String that
uses 'const char *' without a length:
- String::append(const char*)
- Binary_string(const char *str)
- String(const char *str, CHARSET_INFO *cs)
- append_for_single_quote(const char *)
All usage of append(const char*) is changed to either use
String::append(char), String::append(const char*, size_t length) or
String::append(LEX_CSTRING)
- Added STRING_WITH_LEN() around constant string arguments to
String::append()
- Added overflow argument to escape_string_for_mysql() and
escape_quotes_for_mysql() instead of returning (size_t) -1 on overflow.
This was needed as most usage of the above functions never tested the
result for -1 and would have given wrong results or crashes in case
of overflows.
- Added Item_func_or_sum::func_name_cstring(), which returns LEX_CSTRING.
Changed all Item_func::func_name()'s to func_name_cstring()'s.
The old Item_func_or_sum::func_name() is now an inline function that
returns func_name_cstring().str.
- Changed Item::mode_name() and Item::func_name_ext() to return
LEX_CSTRING.
- Changed for some functions the name argument from const char * to
to const LEX_CSTRING &:
- Item::Item_func_fix_attributes()
- Item::check_type_...()
- Type_std_attributes::agg_item_collations()
- Type_std_attributes::agg_item_set_converter()
- Type_std_attributes::agg_arg_charsets...()
- Type_handler_hybrid_field_type::aggregate_for_result()
- Type_handler_geometry::check_type_geom_or_binary()
- Type_handler::Item_func_or_sum_illegal_param()
- Predicant_to_list_comparator::add_value_skip_null()
- Predicant_to_list_comparator::add_value()
- cmp_item_row::prepare_comparators()
- cmp_item_row::aggregate_row_elements_for_comparison()
- Cursor_ref::print_func()
- Removes String_space() as it was only used in one cases and that
could be simplified to not use String_space(), thanks to the fixed
my_vsnprintf().
- Added some const LEX_CSTRING's for common strings:
- NULL_clex_str, DATA_clex_str, INDEX_clex_str.
- Changed primary_key_name to a LEX_CSTRING
- Renamed String::set_quick() to String::set_buffer_if_not_allocated() to
clarify what the function really does.
- Rename of protocol function:
bool store(const char *from, CHARSET_INFO *cs) to
bool store_string_or_null(const char *from, CHARSET_INFO *cs).
This was done to both clarify the difference between this 'store' function
and also to make it easier to find unoptimal usage of store() calls.
- Added Protocol::store(const LEX_CSTRING*, CHARSET_INFO*)
- Changed some 'const char*' arrays to instead be of type LEX_CSTRING.
- class Item_func_units now used LEX_CSTRING for name.
Other things:
- Fixed a bug in mysql.cc:construct_prompt() where a wrong escape character
in the prompt would cause some part of the prompt to be duplicated.
- Fixed a lot of instances where the length of the argument to
append is known or easily obtain but was not used.
- Removed some not needed 'virtual' definition for functions that was
inherited from the parent. I added override to these.
- Fixed Ordered_key::print() to preallocate needed buffer. Old code could
case memory overruns.
- Simplified some loops when adding char * to a String with delimiters.
The reason for this is to make all temporary file names similar and
also to be able to figure out from where a #sql-xxx name orginates.
New format is for most cases:
'#sql-name-current_pid-thread_id[-increment]'
Where name is one of subselect, alter, exchange, temptable or backup
The exceptions are:
ALTER PARTITION shadow files:
'#sql-shadow-thread_id-'original_table_name'
Names used with temp pool:
'#sql-name-current_pid-pool_number'
MDEV-22088 S3 partitioning support
All ALTER PARTITION commands should now work on S3 tables except
REBUILD PARTITION
TRUNCATE PARTITION
REORGANIZE PARTITION
In addition, PARTIONED S3 TABLES can also be replicated.
This is achived by storing the partition tables .frm and .par file on S3
for partitioned shared (S3) tables.
The discovery methods are enchanced by allowing engines that supports
discovery to also support of the partitioned tables .frm and .par file
Things in more detail
- The .frm and .par files of partitioned tables are stored in S3 and kept
in sync.
- Added hton callback create_partitioning_metadata to inform handler
that metadata for a partitoned file has changed
- Added back handler::discover_check_version() to be able to check if
a table's or a part table's definition has changed.
- Added handler::check_if_updates_are_ignored(). Needed for partitioning.
- Renamed rebind() -> rebind_psi(), as it was before.
- Changed CHF_xxx hadnler flags to an enum
- Changed some checks from using table->file->ht to use
table->file->partition_ht() to get discovery to work with partitioning.
- If TABLE_SHARE::init_from_binary_frm_image() fails, ensure that we
don't leave any .frm or .par files around.
- Fixed that writefrm() doesn't leave unusable .frm files around
- Appended extension to path for writefrm() to be able to reuse to function
for creating .par files.
- Added DBUG_PUSH("") to a a few functions that caused a lot of not
critical tracing.
TDC_RT_REMOVE_ALL -> tdc_remove_table(). Some occurrences replaced with
TDC_element::flush() (whenver TABLE_SHARE is available).
TDC_RT_REMOVE_NOT_OWN[_KEEP_SHARE] -> TDC_element::flush(). These modes
assume that current thread owns TABLE_SHARE reference, which means we can
avoid hash lookup and flush unused TABLE instances directly.
TDC_RT_REMOVE_UNUSED -> TDC_element::flush_unused(). Only [ab]used by
mysql_admin_table() currently. Should be removed eventually.
Part of MDEV-17882 - Cleanup refresh version
