Atomic CREATE OR REPLACE allows to keep an old table intact if the
command fails or during the crash. That is done by renaming the
original table to temporary name, as a backup and restoring it if the
CREATE fails. When the command is complete and logged the backup
table is deleted.
Atomic replace algorithm
Two DDL chains are used for CREATE OR REPLACE:
ddl_log_state_create (C) and ddl_log_state_rm (D).
1. (C) Log rename of ORIG to TMP table (Rename TMP to original).
2. Rename orignal to TMP.
3. (C) Log CREATE_TABLE_ACTION of ORIG (drops ORIG);
4. Do everything with ORIG (like insert data)
5. (D) Log drop of TMP
6. Write query to binlog (this marks (C) to be closed in
case of failure)
7. Execute drop of TMP through (D)
8. Close (C) and (D)
If there is a failure before 6) we revert the changes in (C)
Chain (D) is only executed if 6) succeded (C is closed on
crash recovery).
Foreign key errors will be found at the 1) stage.
Additional notes
- CREATE TABLE without REPLACE and temporary tables is not affected
by this commit.
set @@drop_before_create_or_replace=1 can be used to
get old behaviour where existing tables are dropped
in CREATE OR REPLACE.
- CREATE TABLE is reverted if binlogging the query fails.
- Engines having HTON_EXPENSIVE_RENAME flag set are not affected by
this commit. Conflicting tables marked with this flag will be
deleted with CREATE OR REPLACE.
- Replication execution is not affected by this commit.
- Replication will first drop the conflicting table and then
creating the new one.
- CREATE TABLE .. SELECT XID usage is fixed and now there is no need
to log DROP TABLE via DDL_CREATE_TABLE_PHASE_LOG (see comments in
do_postlock()). XID is now correctly updated so it disables
DDL_LOG_DROP_TABLE_ACTION. Note that binary log is flushed at the
final stage when the table is ready. So if we have XID in the
binary log we don't need to drop the table.
- Three variations of CREATE OR REPLACE handled:
1. CREATE OR REPLACE TABLE t1 (..);
2. CREATE OR REPLACE TABLE t1 LIKE t2;
3. CREATE OR REPLACE TABLE t1 SELECT ..;
- Test case uses 6 combinations for engines (aria, aria_notrans,
myisam, ib, lock_tables, expensive_rename) and 2 combinations for
binlog types (row, stmt). Combinations help to check differences
between the results. Error failures are tested for the above three
variations.
- expensive_rename tests CREATE OR REPLACE without atomic
replace. The effect should be the same as with the old behaviour
before this commit.
- Triggers mechanism is unaffected by this change. This is tested in
create_replace.test.
- LOCK TABLES is affected. Lock restoration must be done after new
table is created or TMP is renamed back to ORIG
- Moved ddl_log_complete() from send_eof() to finalize_ddl(). This
checkpoint was not executed before for normal CREATE TABLE but is
executed now.
- CREATE TABLE will now rollback also if writing to the binary
logging failed. See rpl_gtid_strict.test
backup ddl log changes
- In case of a successfull CREATE OR REPLACE we only log
the CREATE event, not the DROP TABLE event of the old table.
ddl_log.cc changes
ddl_log_execute_action() now properly return error conditions.
ddl_log_disable_entry() added to allow one to disable one entry.
The entry on disk is still reserved until ddl_log_complete() is
executed.
On XID usage
Like with all other atomic DDL operations XID is used to avoid
inconsistency between master and slave in the case of a crash after
binary log is written and before ddl_log_state_create is closed. On
recovery XIDs are taken from binary log and corresponding DDL log
events get disabled. That is done by
ddl_log_close_binlogged_events().
On linking two chains together
Chains are executed in the ascending order of entry_pos of execute
entries. But entry_pos assignment order is undefined: it may assign
bigger number for the first chain and then smaller number for the
second chain. So the execution order in that case will be reverse:
second chain will be executed first.
To avoid that we link one chain to another. While the base chain
(ddl_log_state_create) is active the secondary chain
(ddl_log_state_rm) is not executed. That is: only one chain can be
executed in two linked chains.
The interface ddl_log_link_chains() was defined in "MDEV-22166
ddl_log_write_execute_entry() extension".
Atomic info parameters in HA_CREATE_INFO
Many functions in CREATE TABLE pass the same parameters. These
parameters are part of table creation info and should be in
HA_CREATE_INFO (or whatever). Passing parameters via single
structure is much easier for adding new data and
refactoring.
Aria changes:
- Fixed issue in Aria engine with CREATE + locked tables
that data was not properly commited in some cases in
case of crashes.
InnoDB related changes (by Marko Mäkelä):
- table_name_t::is_create_or_replace(): A new predicate to check for
CREATE OR REPLACE TABLE will rename an old table to
and eventually drop after creating the replacement.
- dict_table_t::parse_name(): Do acquire MDL on #sql-create- names
for partitioned tables.
- dict_table_rename_in_cache(): On CREATE OR REPLACE TABLE ... SELECT,
forget the original dict_table_t::mdl_name so that purge will
acquire MDL on the #sql-create- name instead. In this way, the
MDL_EXCLUSIVE that the CREATE OR REPLACE TABLE holds on the
user-visible name will not unnecessarily block any purge of old history
until the very end when the #sql-create- table will be dropped.
- ha_innobase::delete_table(): Do not check FOREIGN KEY consistency
when dropping an #sql-create- table.
- row_rename_table_for_mysql(): Update SYS_FOREIGN.ID also
when renaming to #sql-create- in order to avoid any
duplicate key error when CREATE OR REPLACE TABLE is
creating some FOREIGN KEY constraints by names
that existed in the old table.
Other changes:
- Removed some auto variables in log.cc for better code readability.
- Fixed old bug that CREATE ... SELECT would not be able to auto repair
a table that is part of the SELECT.
- Marked MyISAM that it does not support ROLLBACK (not required but
done for better consistency with other engines).
- maria_create_trn_for_mysql() does not register a new transaction
handler for commits. This was needed to ensure create or replace
will not end with an active transaction.
- We do not get anymore warnings about "Engine not supporting atomic
create" when doing a legal CREATE OR REPLACE on a table with
foreign key constraints.
- Updated VIDEX engine flags to disable CREATE SEQUENCE.
- Removed mysql_mutex_unlock(&LOCK_gdl) / mysql_mutex_lock(&LOCK_gdl)
around calls to binlog as these are unsafe. The binlog code uses
global variables that needs protection from other caller.
- EITS data is preserved if create or replace fails if
drop_before_create_or_replace=OFF. If ON, then create or replace
will drop EITS before the drop of the original table (as before).
- Using CREATE OR REPLACE on a encrypted table that the user cannot
decrypt will fail instead of replacing the encrypted table.
The encrypted table will unchanged.
Known issues:
- One cannot use create or replace on an InnoDB tables that has foreign
key references point to it
- CREATE OR REPLACE TEMPORARY table is not full atomic. Any conflicting
table will always be dropped before creating a new one. (Old behaviour).
Bug fixes related to this MDEV:
MDEV-36435 Assertion failure in finalize_locked_tables()
MDEV-36439 Assertion `thd_arg->lex->sql_command != SQLCOM_CREATE_SEQUENCE...
MDEV-36498 Failed CoR in non-atomic mode no longer generates DROP in RBR...
MDEV-36508 Temporary files #sql-create-....frm occasionally stay after
crash recovery
MDEV-38479 Crash in CREATE OR REPLACE SEQUENCE when new sequence cannot
be created
MDEV-36497 Assertion failure after atomic CoR with Aria under lock in
transactional context
MDEV-36501 EITS data is lost after failed attempt to CREATE OR REPLACE
table
MDEV-36493 Atomic CREATE OR REPLACE ... SELECT blocks InnoDB purge
MDEV-39367 MSAN/valgrind errors in temp_file_size_cb_func,
main.tmp_space_usage fails
MDEV-39446 Atomic CREATE OR REPLACE fails if a table cannot be decrypted
MDEV-40776 Atomic CREATE OR REPLACE silently breaks the foreign key
MDEV-40765 Assertion `"unexpected references" == 0' failed upon failing
CREATE OR REPLACE
MDEV-40994 Atomic CoR: Transaction not registered for MariaDB 2PC, but
transaction is active
Reverted commits:
- MDEV-36685 "CREATE-SELECT may lose in binlog side-effects of
stored-routine" as it did not take into account that it safe to
clear binlogs if the created table is non transactional and there
are no other non transactional tables used.
This was done because it caused extra logging when it is not
needed (not using any non transactional tables) and it also did
not solve side effects when using statement based loggging.
This is part of MDEV-25292 Atomic CREATE OR REPLACE TABLE.
Removed default values for arguments, added flags argument to specify
filename flags (FN_TO_IS_TMP, FN_FROM_IS_TMP) and forward the flag to
build_table_name().
Original patch from: Aleksey Midenkov <midenok@gmail.com>
Allowing prepared statements in stored functions when
a stored function is used in an assignment right hand.
Both DEFAULT clause of a variable initialization and
the right side of the SET statement are supported:
CREATE PROCEDURE p1()
BEGIN
-- case 1: DEFAULT clause
DECLARE spvar1 INT DEFAULT f1_with_ps(); -- OK
-- case 2: SP variable assignment statement
DECLARE spvar2 INT;
SET spvar2= f1_with_ps(); -- OK
END;
- Only assignments to SP variables works for now:
* SET spvar= func_with_ps(); -- OK
* SET @uvar= func_with_ps(); -- Error
- Only bare function calls are supported for now. Using a function in
an expression does not make it PS-safe yet:
SET v= f1()+0;
- The parser now does not reject PS statements in stored functions.
PS applicability in stored functions is now detected at run time.
Note, PS statements in triggers are still prohibited by the parser.
- Functions with PS do not acquire MDL locks on tables, and no MDL is
taken on the routines themselves either. They work like procedures in
terms of table opening and routine locking: a concurrent DROP FUNCTION
can complete while such a function is executing.
- Functions with PS are not replicated as a single `SELECT f1()` call.
They are replicated per-statement, like procedures.
Helper changes:
- Changing the return result for LEX::sp_variable_declarations_init()
from void to bool to catch errors in the caller properly.
Misc:
- This patch incorporates fixes for the following bugs found during debugging:
MDEV-40224,MDEV-40225,MDEV-40226,MDEV-40227,MDEV-40240,
MDEV-40285,MDEV-40288,MDEV-40315,MDEV-40318,MDEV-40890,MDEV-40900,
MDEV-40901,MDEV-40913,MDEV-40914,MDEV-41013,MDEV-41015,MDEV-41019
Assisted-by: Claude - reviews and minor clean-ups
This task loads the stats of the tables that are used in a query,
from the trace into the optimizer. This feature is controlled
by optimizer_replay_context, and points to an user defined variable name,
that has the context information.
The stats such as num_of_records present in the table, indexes if present,
their names, along with the average number of records_per_key
with in each index, cost of reading an index are loaded from the trace.
Additionally, stats from range analysis i.e. ranges, and the
corresponding number of records, along with their costs are also
loaded from the trace.
The trace context which is in JSON format is firstly set into the
user defined session variable, and this variable name is set to
optimizer_replay_context system variable.
Later, when a user issues a query, the contents of the json context is
parsed and an in memory representation is built using the class
Optimizer_context_replay. This class is then used by the optimizer
to update and save original values of the tables, indexes, and range stats
in the methods "set_statistics_for_table()" of sql_statistics.cc, and
"check_quick_select()" of opt_range.cc.
After the query gets finished, the statistics that were updated
in the optimizer are restored back to the saved original values.
The entry point for parsing the json structure is in
"mysql_execute_command()" of sql_parse.cc, and similarly exit point
i.e. to restore the saved stats of the optimizer is at the end
of the same method.
Two new warning/error messages are introduced:
ER_JSON_OPTIMIZER_REPLAY_CONTEXT_PARSE_FAILED, and
ER_JSON_OPTIMIZER_REPLAY_CONTEXT_MATCH_FAILED
When starting to do a full table/index scan without a WHERE or JOIN
condition, tell the storage engine so and the corresponding
ulong-truncated LIMIT.
Include an innodb implementation: added an innodb switch
table_lock_on_full_scan, so that when the switch is on, on receiving
the full scan signal from the sql layer, if the truncated LIMIT is
ULONG_MAX (likely no LIMIT), attempt to acquire a table lock.
Updated tests that have different results with the switch on.
The three deadlock_*_race tests cannot reach their DEBUG_SYNC race
under a table lock (it degenerates to a timeout), and the three I_S
tests only restate a lock-mode change already covered
by innodb_full_scan.test.
(Comment and code edited by Sergei Petrunia <sergey@mariadb.com> and
Thirunarayanan Balathandayuthapani <thiru@mariadb.com>)
With log_bin=ON a transaction is committed via two-phase commit (the
binary log is the second participant), so it passes through the InnoDB
XA-prepare state. While a donor is held in BLOCK_COMMIT for a mariabackup
backup, its parallel appliers (wsrep_slave_threads > 1) leave one or more
such writesets prepared-but-not-yet-committed, and the snapshot captures
them. On a freshly SST'd joiner nothing resolves these prepared
transactions: binlog crash recovery does not run (the joiner has no in-use
binlog to recover from), and the wsrep continuity-based commit is inactive
because wsrep_emulate_bin_log is FALSE when log_bin is ON. The leftover
prepared transactions then abort startup with "Found <N> prepared
transactions!". Note this does not depend on the prepared set being
non-contiguous - even a contiguous run aborts, because nothing commits
or rolls it back.
Rollback these transactions in xarecover_handlerton(). If rollback fails
flag error to cause unireg_abort().
After a mariabackup SST the joiner could fail with
ER_GTID_STRICT_OUT_OF_ORDER (error 1950)
while re-binlogging transactions received over IST.
The cause is that the binary log copied from the donor carries a
Gtid_list whose position can be ahead of the storage-engine snapshot
because getting snapshot and binlog are no mutually atomic, so transactions
can be present in the copied binlog that are not committed in the copied
engine snapshot.
After the SST the joiner reports the (committed) engine position to the
cluster, IST resends those transactions, and re-binlogging them under
gtid_strict_mode=ON collides with the ahead Gtid_list -> error 1950.
(MDEV-34483 made the engine snapshot stop short of the binlog, which is
what exposed this.)
The copied binary log carries no transactions the joiner needs - only a
Gtid_list - so instead of shipping and then having to truncate/reconcile
it, the joiner now starts a fresh binary log and seeds its GTID position
from the storage-engine checkpoint during recovery. That checkpoint is
the committed cluster position, i.e. exactly where IST resumes, so the
joiner's binary log stays in lockstep with the rest of the cluster and
no out-of-order GTID can occur.
This works for both wsrep_gtid_mode settings; only the binlog domain of
the cluster stream differs:
- wsrep_gtid_mode=ON : wsrep_gtid_domain_id (cluster writes are
re-tagged to it), which is the domain stored in the checkpoint;
- wsrep_gtid_mode=OFF: gtid_domain_id (cluster writes keep the node's
configured domain).
Async-replica positions (mysql.gtid_slave_pos) are part of the engine
snapshot and survive the SST unchanged, so a Galera node can still serve
as an async master or replica across the SST.
This commit:
- sql/log.cc: adds wsrep_seed_binlog_gtid_state(), called from
do_binlog_recovery() when the joiner has no binary log, seeding the
binlog GTID state for the cluster domain to the SE checkpoint position.
- scripts/wsrep_sst_mariabackup.sh: no longer moves the donor's binary
log into place on the joiner.
- extra/mariabackup: backward compatibility: keep shipping binlog file
in SST but
- on donor fix the race between rotation and shipping so that the file
shipped is the one that had been rotated;
- on joiner discard shipped binlog in favour of one generated by
wsrep_seed_binlog_gtid_state().
- sql/wsrep_sst.cc: logs the position actually adopted from storage
(the authoritative post-SST position) rather than the script-reported
one.
- sql/handler.cc: downgrades the "Discovered discontinuity in recovered
wsrep transaction XIDs" message in wsrep_order_and_check_continuity()
from warning to debug level. With parallel appliers a snapshot
routinely captures prepared XIDs that are not contiguous with the
engine checkpoint, so this is normal during SST recovery and of no
value in regular operation; the transactions past the checkpoint are
re-delivered by the cluster (IST/SST) regardless.
- Adds an MDEV-38147 MTR test reproducing the issue.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Just like when creating a table, the name canonicalisation happens in
ha_create_table.
This still allows table name canonicalisation to still take place
normally (e.g. in a DROP TABLE statement), but also fixes call the
handlerton method to drop partitions from DDL recovery, as for files
corresponding to partitions, in the format of
<table_name>#P#<partition_name>, consistently only table names are
canonicalised. For example in ha_partition::drop_partitions, first the
table name is canonicalised, before the #P#<partition_name> part is
appended, and the full name is passed to file->delete_table.
Strengthen some previous failing testcases to show that partition
names don't get lowered.
Problem:
========
When creating tables with vector indexes, if the secondary table
creation fails after the main table is successfully created,
the server was not properly cleaning up the main table's .ibd file.
Stale file exists because create_table_impl() always called
ddl_log_complete() on any error, which disables DDL log entries
instead of executing them for cleanup. The main table would be
left behind even though the overall CREATE TABLE operation failed.
Solution:
=========
ha_create_table(): Make it responsible for cleaning up
everything it created when it returns an error.
On failure of the high level index creation, drop the main
table and shadow table.
- Change thd->backup_commit_lock from MDL_request* to MDL_ticket*,
and convert related call sites in handler.cc, log.cc, sql_class.cc,
and xa.cc to use MDL_ACQUIRE_LOCK.
- Convert reload_acl_and_cache() in sql_reload.cc, purge_master_logs()
and reset_master() in sql_repl.cc to MDL_ACQUIRE_LOCK, holding the
ticket in a local MDL_ticket* (these functions used a local
MDL_request originally and should not touch thd->backup_commit_lock).
- Convert acquire_lock() in partition_info.cc to MDL_ACQUIRE_LOCK.
- Add MDL_REQUEST_LIST_ADD() helper for enqueuing lock requests into
MDL_request_list, and convert call sites in sql_base.cc and sp.cc.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.
Added ADAPTIVE_HASH_INDEX=DEFAULT|YES|NO table and index option to InnoDB.
The table and index options only have an effect if InnoDB adaptive hash
index feature is enabled.
- Having the ADAPTIVE_HASH_INDEX TABLE option set to NO will disable
adaptive hash index for all indexes in the table that do not have
the index option adaptive_hash_index=yes.
- Having the ADAPTIVE_HASH_INDEX TABLE option set to YES will enable the
adaptive hash index for all indexes in the table that do not have
the index option adaptive_hash_index=no.
- Using adaptive_hash_index=default deletes the old setting.
- One can also use OFF/ON as the options. This is to make it work similar
as other existing options.
- innodb.adaptive_hash_index has been changed from a bool to an enum with
values OFF, ON and IF_SPECIFIED. If IF_SPECIFIED is used, adaptive
hash index is only used for tables and indexes that specify
adaptive_hash_index=on.
- The following new options can be used to further optimize adaptive hash
index for an index (default is unset/auto for all of them):
- complete_fields:
- 0 to the number of columns the key is defined on (max 64)
- bytes_from_incomplete_field:
- This is only usable for memcmp()-comparable index fields, such as
VARBINARY or INT. For example, a 3-byte prefix on an INT will
return an identical hash value for 0‥255, another one for 256‥511,
and so on.
- Range is min 0 max 16383.
- for_equal_hash_point_to_last_record:
- Default is unset/auto, NO points to the first record, known as
left_side in the code; YES points to the last record.
Example: we have an INT column with the values 1,4,10 and bytes=3,
will that hash value point to the record 1 or the record 10?
Note: all values will necessarily have the same hash value
computed on the big-endian byte prefix 0x800000, for all of the
values 0x80000001, 0x80000004, 0x8000000a. InnoDB inverts the
sign bit in order to have memcmp()-compatible comparison.
Example:
CREATE TABLE t1 (a int primary key, b varchar(100), c int,
index (b) adaptive_hash_index=no, index (c))
engine=innodb, adaptive_hash_index=yes;
Notable changes in InnoDB
- btr_search.enabled was changed from a bool to a ulong enum to be
able to handle options OFF, ON and IF_SPECIFIED. ulong is needed
to compile with MariaDB enum variables.
- To be able to find all instances where btr_search.enabled was used
I changed all code to use btr_search.get_enabled() when accessing
the value and used btr_search.is_enabled(index) to test if AHI is
enabled for the index.
- btr_search.enable() was changed to always take two parameters,
resize and value of enabled. This was needed as enabled can now
have values OFF (0), ON (1), and IF_SPECIFIED (2).
- store all AHI-related options in per-index dict_index_t::ahi
bit-packed 32-bit atomic field dict_index_t::ahi::enabled_fixed_mask
- static assertions and debug assertions ensure that all options fit
into the 32-bit field
- packing details:
- enabled, adaptive_hash_index (first 2 bits)
- fields, complete_fields (7 bits)
- bytes, bytes_from_incomplete_field (14 bits)
- left, ~for_equal_hash_point_to_last_record (1 bit)
- have_fields, fields set flag (1 bit)
- have_bytes, bytes set flag (1 bit)
- have_left, left set flag (last 1 bit)
- 5 bits spare after have_left
- manipulation of the bit-packed field avoids usage of branches or
conditional instructions to minimize the performance impact of
the new options
- in btr_search_update_hash_ref() apply the per-index AHI options
using bit-masking to override internal heuristic values with user
preferences
- add innodb.index_ahi_option test:
- test a combination of per-table and per-index AHI options
- use a stored procedure which checks if AHI is used during a burst of
index lookups checking delta in adaptive_hash_searches InnoDB
monitor variable
- test that the maximum number of fields per (secondary) index is 64
(32 PK + 32 secondary key columns)
- test that crash recovery retains table/index metadata
- test AHI with partitioned tables
- verify that changing AHI preferences for table/index is instant DDL
- boundary checks for complete_fields and bytes_from_incomplete_field
- add innodb.index_ahi_option_debug test:
- test debug builds with index_ahi_option_debug_check debug variable
enabled to verify that the proper per-index AHI options are applied
during index lookups
- test that "illegal" per-index AHI options are non-destructive and
just lead to automatic parameter clamping and possibly no AHI usage
- test toggling global AHI status with concurrent AHI access
Visible user changes:
- select @@global.adaptive_hash_index will now return a string instead
of 0 or 1.
Other notable changes:
- In sql/create_options.cc:
- In function set_one_value() avoid reading after the end of the
current string.
Co-authored-by: Monty <monty@mariadb.org>
Co-authored-by: Marko Mäkelä <marko.makela@mariadb.com>
Co-authored-by: Alessandro Vetere <iminelink@gmail.com>
Co-authored-by: Thirunarayanan Balathandayuthapani <thiru@mariadb.com>
Add new acquire_lock() overloads on MDL_context that combine MDL_request
initialization and lock acquisition into a single call, returning
MDL_ticket* directly. Convert applicable call sites across the codebase
to use the new ACQUIRE_LOCK macro.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.
When ALTER TABLE uses the copy algorithm, ha_create_table() is
invoked to build the shadow table. A failure there was previously
reported as "Can't create table", which is misleading because the
user never issued a CREATE.
Fix (per review by @midenok): keep errno 1005 / SQLSTATE HY000
unchanged and only swap the message text when HA_CREATE_TMP_ALTER
is set, via a new translatable template ER_CANT_CREATE_TMP_ALTER_TABLE
in errmsg-utf8.txt (no SQLSTATE clause -- it is a message template
rather than a wire error code).
The user-visible error becomes:
ERROR 1005 (HY000): Can't create temporary table for ALTER TABLE \
`db`.`tbl` (errno: N "...")
No existing error handler, stored procedure, tool, or application
that matches on errno 1005 or SQLSTATE HY000 is affected.
Notes on the 12.3 rebase:
* In 12.3 the ER_CANT_CREATE_TABLE reporting logic has been moved
from ha_create_table() into its new helper ha_create_table_from_share().
The HA_CREATE_TMP_ALTER branch is added in the helper so that both
the main shadow table and any high-level (vector) index sub-tables
go through the same path. Vector index sub-tables use a zero-
initialised index_cinfo, so HA_CREATE_TMP_ALTER is never set for
them and they still get the plain "Can't create table" message.
Review follow-ups (Round 6, @midenok):
* Moved the test content from suite/innodb/t/alter_table_error_message.test
into main/alter_table.test (no duplicate --include directives);
dropped the extra .test/.result files accordingly.
* Added the standard "End of 12.3 tests" section marker at the end.
* Removed the unnecessary DROP TABLE IF EXISTS cluster_t; in the
cleanup step (the test is deterministic, the table no longer
exists at that point).
Review follow-ups (Round 7, test re-record + errmsg formatting):
* Fixed ER_CANT_CREATE_TMP_ALTER_TABLE template to use the exact
ER_CANT_CREATE_TABLE format specifiers, so error frames produced
by my_error() are byte-identical to the existing error (only the
fixed prefix changes).
* Re-recorded innodb.innodb-index.result and innodb.foreign_key.result
which now observe the new "Can't create temporary table for ALTER
TABLE" message in ALTER TABLE error paths that used to print
"Can't create table".
* No code changes outside of the intentional message swap; all other
.result files remain untouched.
Review follow-ups (Round 8, additional test re-record from CI):
* Re-recorded innodb.table_flags.result for the MDEV-38079 scenario
(ALTER TABLE t1 PAGE_COMPRESSED=1, ALGORITHM=COPY under
INNODB_DEFAULT_ROW_FORMAT=REDUNDANT) -- this ALTER path now reports
the new "Can't create temporary table for ALTER TABLE" message.
Verified on all 10 page size / checksum combinations (4k/8k/16k/
32k/64k x strict_crc32/strict_full_crc32).
* Re-recorded parts.engine_defined_part_attributes.result for the
ALTER TABLE `t4` PARTITION BY RANGE(...) ENCRYPTED path. The four
remaining "Can't create table" occurrences in the same file refer
to pure CREATE TABLE failures and correctly retain the original
message.
* No code or test-case logic changes; only .result re-recordings.
Signed-off-by: a18792721831 <735809899@qq.com>
CLA: a18792721831 <735809899@qq.com>
Reason:
=======
Following the changes in MDEV-38734, the server no longer marks
all indexed virtual columns during an UPDATE operation.
Consequently, ha_innobase::update() populates the upd_t vector
with old_vrow but omits the actual data for these virtual columns.
Despite this omission, trx_undo_page_report_modify() continues to
write metadata for indexed virtual columns into the undo log. Because
the actual values are missing from the update vector, the undo log
entry is recorded without the historical data for these columns.
When the purge thread processes the undo log to reconstruct a
previous record state for MVCC, it identifies an indexed virtual
column but finds no associated data.
The purge thread incorrectly interprets this missing data as a NULL
value, rather than a "missing/unrecorded" value. The historical
record is reconstructed with an incorrect NULL for the virtual column.
This causes the purge thread to incorrectly identify and purge
records that are not actually delete-marked, leading to abort
of server.
Solution:
=========
ha_innobase::column_bitmaps_signal(): Revert the column-marking
logic to the state prior to commit a4e4a56720, ensuring all
indexed virtual columns are unconditionally marked during an UPDATE.
The previous "optimization" attempted to manually detect indexed
column changes before marking virtual columns. The manual check
for indexed column modifications is redundant. InnoDB already
provides the UPD_NODE_NO_ORD_CHANGE flag within row_upd_step().
This flag is being used in trx_undo_page_report_modify() and
trx_undo_read_undo_rec() should log or read virtual column values.
Refactored column_bitmaps_signal() to accept a mark_for_update
parameter that controls when indexed virtual columns are marked.
TABLE::mark_columns_needed_for_update() is the only place that needs
mark_for_update=true because only UPDATE operations need to mark
indexed virtual columns for InnoDB's undo logging mechanism.
INSERT operation is already handled by
TABLE::mark_virtual_columns_for_write(insert_fl=true).
Even the commit a4e4a56720 changes are
going to affect TABLE::mark_virtual_column_for_write(false) and
It is called during UPDATE operation, and that's when
column_bitmaps_signal() needs to mark indexed virtual columns.
Online DDL has separate code path which is handled by
row_log_mark_virtual_cols() for all DML operations
The method Type_handler::Column_definition_fix_attributes() was an
addition for Type_handler::Column_definition_set_attributes().
The code in virtual implementations of Column_definition_fix_attributes()
has now been joined to corresponding virtual implementations of
Column_definition_set_attributes().
After this change everything is done in Column_definition_set_attributes().
This makes the code clearer. Previous implementation was rather confusing.
For example, for temporal data types:
(1) After Column_definition_set_attributes():
- Column_definition::length meant the fractional precision
- Column_definition::decimals was set to 0
(2) After Column_definition_fix_attributes():
- Column_definition::length means the full character length
- Column_definition::decimals means the fractional precision
Now everything gets set to (2) right in Column_definition_set_attributes().
Problem:
=======
InnoDB DDL does ALTER TABLE PAGE_COMPRESSED=1 because:
1. check_if_supported_inplace_alter() reads srv_file_per_table
during precheck and does allow INSTANT operation.
2. User does change innodb_file_per_table later.
But prepare phase read srv_file_per_table again during execution.
3. If the global variable changed between these phases, causes
server abort for page_compressed tables.
Solution:
=========
- Add a file_per_table member to Alter_inplace_info to
capture the innodb_file_per_table value during the
precheck phase and use that consistent value throughout
the entire ALTER TABLE operation.
- Converted boolean flags (online, ignore, error_if_not_empty,
mdl_exclusive_after_prepare) from individual boolean
members to bitfields packed in a single byte
- Reduced Alter_inplace_info structure size by 24 bytes
remove copying of part_elem->option_struct to table->s->option_struct.
It meant that most of the time a handler had no access to its options
(that's why some handlers resorted to a complex process of guessing the
correct partition) and couldn't work concurrenty. Instead
* introduce handler::option_struct which will point to
table->s->option_struct or part_elem->option_struct as appropriate,
the handler can use it any time as needed. A handler should not use
table->s->option_struct unless it really knows what it's doing and has
verified that it doesn't break partitioning
* rename option_struct in table->s to option_struct_table and in
part_elem to option_struct_part to emphasize it's semantics and
prevent incorrect usage.
* fix engines accordingly.
Implement an improved binlog implementation that is integrated into
the storage engine. The new implementation is enabled with the
--binlog-storage-engine option. Initially the InnoDB storage engine
implements the binlog.
Integrating the binlog in the storage engine improves performance,
since it makes the InnoDB redo log the single source of truth and
avoids the need for expensive two-phase commit between binlog and
engine. It also makes it possible to disable durability (set
--innodb-flush-log-at-trx-commit=0) to further improve performance,
while still preserving the ability to recover the binlog and database
into a consistent state after a crash.
The new binlog implementation also greatly improves the internal
design and implementation of the binlog, and enables future
enhancements for replication.
This is a squash of the original 11.4-based patch series.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
...just like the when deleting the .frm file in the same function.
This improves consistency: internal duplicate deletion of .par file
and .frm file both fail silently.
Two transactions could binlog their completions in opposite to how it
is done in Engine. That is is rare situations ROLLBACK in Engine of
the dependency parent transaction could be scheduled by the
transaction before its binlogging. That give a follower dependency
child one get binlogged ahead of the parent.
For fixing this bug its necessary to ensure the binlogging phase is
always first one in the internal one-phase rollback protocol.
The commit combines
1. a code polishing piece over a part of MDEV-21117 that
made binlog handlerton always commit first in no-2pc cases and
2. the same rule now applies to the rollback.
An added test demonstrates how the child could otherwise reach binlog
before its parent.
Two transactions could binlog their completions in opposite to how it
is done in Engine. That is is rare situations ROLLBACK in Engine of
the dependency parent transaction could be scheduled by the
transaction before its binlogging. That give a follower dependency
child one get binlogged ahead of the parent.
For fixing this bug its necessary to ensure the binlogging phase is
always first one in the internal one-phase rollback protocol.
The commit makes sure the binlog handlerton always rollbacks as first
handlerton in no-2pc cases.
An added test demonstrates how the child could otherwise reach binlog
before its parent.
