This essentially reverts commit 4e89ec6692
and only disables InnoDB persistent statistics for tests where it is
desirable. By design, InnoDB persistent statistics will not be updated
except by ANALYZE TABLE or by STATS_AUTO_RECALC.
The internal transactions that update persistent InnoDB statistics
in background tasks (with innodb_stats_auto_recalc=ON) may cause
nondeterministic query plans or interfere with some tests that deal
with other InnoDB internals, such as the purge of transaction history.
These tests produced different results in case they were run
with the option --ps-protocol.
These tests produced different result sets since a value of
Feature_subquery and handler_read_key status system variables
are updated one time more for ps-protocol (the first time it is updated
on Prepare phase and the second time on Execute phase of PS protocol)
So different result sets are expected for both tests. To make tests
successfully runnable both for case it is run with and without
the option --ps-protocol the new protocol combination [ps, nm]
and protocol specific result files have been added.
Moreover, the perl script mysql-test/mariadb-test-run.pl
has been updated to make the variable opt_ps_protocol visible
outside perl file containing this variable.
- There should be no substitution if engine exists, only when doesn't
exist
- Handling of an error when sys_var `default_tmp_storage_engine` is
assigned to unsupported engine.
- rocksdb doesn't support embedded server ebfc4e6ad0 so is excluded
Closes PR #774
Reviewed by: serg@mariadb.comvicentiu@mariadb.org
There are a few different cases to consider
Logging of CREATE TABLE and CREATE TABLE ... LIKE
- If REPLACE is used and there was an existing table, DDL log the drop of
the table.
- If discovery of table is to be done
- DDL LOG create table
else
- DDL log create table (with engine type)
- create the table
- If table was created
- Log entry to binary log with xid
- Mark DDL log completed
Crash recovery:
- If query was in binary log do nothing and exit
- If discoverted table
- Delete the .frm file
-else
- Drop created table and frm file
- If table was dropped, write a DROP TABLE statement in binary log
CREATE TABLE ... SELECT required a little more work as when one is using
statement logging the query is written to the binary log before commit is
done.
This was fixed by adding a DROP TABLE to the binary log during crash
recovery if the ddl log entry was not closed. In this case the binary log
will contain:
CREATE TABLE xxx ... SELECT ....
DROP TABLE xxx;
Other things:
- Added debug_crash_here() functionality to Aria to be able to test
crash in create table between the creation of the .MAI and the .MAD files.
This patch changes the main name of 3 byte character set from utf8 to
utf8mb3. New old_mode UTF8_IS_UTF8MB3 is added and set TRUE by default,
so that utf8 would mean utf8mb3. If not set, utf8 would mean utf8mb4.
The easiest way to compile and test the server with UBSAN is to run:
./BUILD/compile-pentium64-ubsan
and then run mysql-test-run.
After this commit, one should be able to run this without any UBSAN
warnings. There is still a few compiler warnings that should be fixed
at some point, but these do not expose any real bugs.
The 'special' cases where we disable, suppress or circumvent UBSAN are:
- ref10 source (as here we intentionally do some shifts that UBSAN
complains about.
- x86 version of optimized int#korr() methods. UBSAN do not like unaligned
memory access of integers. Fixed by using byte_order_generic.h when
compiling with UBSAN
- We use smaller thread stack with ASAN and UBSAN, which forced me to
disable a few tests that prints the thread stack size.
- Verifying class types does not work for shared libraries. I added
suppression in mysql-test-run.pl for this case.
- Added '#ifdef WITH_UBSAN' when using integer arithmetic where it is
safe to have overflows (two cases, in item_func.cc).
Things fixed:
- Don't left shift signed values
(byte_order_generic.h, mysqltest.c, item_sum.cc and many more)
- Don't assign not non existing values to enum variables.
- Ensure that bool and enum values are properly initialized in
constructors. This was needed as UBSAN checks that these types has
correct values when one copies an object.
(gcalc_tools.h, ha_partition.cc, item_sum.cc, partition_element.h ...)
- Ensure we do not called handler functions on unallocated objects or
deleted objects.
(events.cc, sql_acl.cc).
- Fixed bugs in Item_sp::Item_sp() where we did not call constructor
on Query_arena object.
- Fixed several cast of objects to an incompatible class!
(Item.cc, Item_buff.cc, item_timefunc.cc, opt_subselect.cc, sql_acl.cc,
sql_select.cc ...)
- Ensure we do not do integer arithmetic that causes over or underflows.
This includes also ++ and -- of integers.
(Item_func.cc, Item_strfunc.cc, item_timefunc.cc, sql_base.cc ...)
- Added JSON_VALUE_UNITIALIZED to json_value_types and ensure that
value_type is initialized to this instead of to -1, which is not a valid
enum value for json_value_types.
- Ensure we do not call memcpy() when second argument could be null.
- Fixed that Item_func_str::make_empty_result() creates an empty string
instead of a null string (safer as it ensures we do not do arithmetic
on null strings).
Other things:
- Changed struct st_position to an OBJECT and added an initialization
function to it to ensure that we do not copy or use uninitialized
members. The change to a class was also motived that we used "struct
st_position" and POSITION randomly trough the code which was
confusing.
- Notably big rewrite in sql_acl.cc to avoid using deleted objects.
- Changed in sql_partition to use '^' instead of '-'. This is safe as
the operator is either 0 or 0x8000000000000000ULL.
- Added check for select_nr < INT_MAX in JOIN::build_explain() to
avoid bug when get_select() could return NULL.
- Reordered elements in POSITION for better alignment.
- Changed sql_test.cc::print_plan() to use pointers instead of objects.
- Fixed bug in find_set() where could could execute '1 << -1'.
- Added variable have_sanitizer, used by mtr. (This variable was before
only in 10.5 and up). It can now have one of two values:
ASAN or UBSAN.
- Moved ~Archive_share() from ha_archive.cc to ha_archive.h and marked
it virtual. This was an effort to get UBSAN to work with loaded storage
engines. I kept the change as the new place is better.
- Added in CONNECT engine COLBLK::SetName(), to get around a wrong cast
in tabutil.cpp.
- Added HAVE_REPLICATION around usage of rgi_slave, to get embedded
server to compile with UBSAN. (Patch from Marko).
- Added #ifdef for powerpc64 to avoid a bug in old gcc versions related
to integer arithmetic.
Changes that should not be needed but had to be done to suppress warnings
from UBSAN:
- Added static_cast<<uint16_t>> around shift to get rid of a LOT of
compiler warnings when using UBSAN.
- Had to change some '/' of 2 base integers to shift to get rid of
some compile time warnings.
Reviewed by:
- Json changes: Alexey Botchkov
- Charset changes in ctype-uca.c: Alexander Barkov
- InnoDB changes & Embedded server: Marko Mäkelä
- sql_acl.cc changes: Vicențiu Ciorbaru
- build_explain() changes: Sergey Petrunia
* Disallow setting wsrep_on = 1 if wsrep_provider is unset. Also, move
wsrep_on_basic from sys_vars to wsrep suite: this test now requires
to run with wsrep_provider set
* Disallow setting @@session.wsrep_on = 1 when @@global.wsrep_on = 0
* Handle the case where a new connection turns @@global.wsrep_on from
off to on. In this case we would miss a call to wsrep_open, causing
unexpected states in wsrep::client_state (causing assertions).
* Disable wsrep.MDEV-22443 because it is no longer possible to enable
wsrep_on, if server is started with wsrep_provider='none'
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
The debug parameter innodb_simulate_comp_failures injected compression
failures for ROW_FORMAT=COMPRESSED tables, breaking the pre-existing
logic that I had implemented in the InnoDB Plugin for MySQL 5.1 to prevent
compressed page overflows. A much better check is already achieved by
defining UNIV_ZIP_COPY at the compilation time.
(Only UNIV_ZIP_DEBUG is part of cmake -DWITH_INNODB_EXTRA_DEBUG=ON.)
Historically, InnoDB supported a buggy page checksum algorithm that did not
compute a checksum over the full page. Later, well before MySQL 4.1
introduced .ibd files and the innodb_file_per_table option, the algorithm
was corrected and the first 4 bytes of each page were redefined to be
a checksum.
The original checksum was so slow that an option to disable page checksum
was introduced for benchmarketing purposes.
The Intel Nehalem microarchitecture introduced the SSE4.2 instruction set
extension, which includes instructions for faster computation of CRC-32C.
In MySQL 5.6 (and MariaDB 10.0), innodb_checksum_algorithm=crc32 was
implemented to make of that. As that option was changed to be the default
in MySQL 5.7, a bug was found on big-endian platforms and some work-around
code was added to weaken that checksum further. MariaDB disables that
work-around by default since MDEV-17958.
Later, SIMD-accelerated CRC-32C has been implemented in MariaDB for POWER
and ARM and also for IA-32/AMD64, making use of carry-less multiplication
where available.
Long story short, innodb_checksum_algorithm=crc32 is faster and more secure
than the pre-MySQL 5.6 checksum, called innodb_checksum_algorithm=innodb.
It should have removed any need to use innodb_checksum_algorithm=none.
The setting innodb_checksum_algorithm=crc32 is the default in
MySQL 5.7 and MariaDB Server 10.2, 10.3, 10.4. In MariaDB 10.5,
MDEV-19534 made innodb_checksum_algorithm=full_crc32 the default.
It is even faster and more secure.
The default settings in MariaDB do allow old data files to be read,
no matter if a worse checksum algorithm had been used.
(Unfortunately, before innodb_checksum_algorithm=full_crc32,
the data files did not identify which checksum algorithm is being used.)
The non-default settings innodb_checksum_algorithm=strict_crc32 or
innodb_checksum_algorithm=strict_full_crc32 would only allow CRC-32C
checksums. The incompatibility with old data files is why they are
not the default.
The newest server not to support innodb_checksum_algorithm=crc32
were MySQL 5.5 and MariaDB 5.5. Both have reached their end of life.
A valid reason for using innodb_checksum_algorithm=innodb could have
been the ability to downgrade. If it is really needed, data files
can be converted with an older version of the innochecksum utility.
Because there is no good reason to allow data files to be written
with insecure checksums, we will reject those option values:
innodb_checksum_algorithm=none
innodb_checksum_algorithm=innodb
innodb_checksum_algorithm=strict_none
innodb_checksum_algorithm=strict_innodb
Furthermore, the following innochecksum options will be removed,
because only strict crc32 will be supported:
innochecksum --strict-check=crc32
innochecksum -C crc32
innochecksum --write=crc32
innochecksum -w crc32
If a user wishes to convert a data file to use a different checksum
(so that it might be used with the no-longer-supported
MySQL 5.5 or MariaDB 5.5, which do not support IMPORT TABLESPACE
nor system tablespace format changes that were made in MariaDB 10.3),
then the innochecksum tool from MariaDB 10.2, 10.3, 10.4, 10.5 or
MySQL 5.7 can be used.
Reviewed by: Thirunarayanan Balathandayuthapani
Introduced two new wsrep_mode options
* REPLICATE_MYISAM
* REPLICATE_ARIA
Depracated wsrep_replicate_myisam parameter and we use
wsrep_mode = REPLICATE_MYISAM instead.
This required small refactoring of wsrep_check_mode_after_open_table
so that both MyISAM and Aria are handled on required DML cases.
Similarly, added Aria to wsrep_should_replicate_ddl to handle DDL
for Aria tables using TOI. Added test cases and improved MyISAM testing.
Changed use of wsrep_replicate_myisam to wsrep_mode = REPLICATE_MYISAM
The test case was setting aria_sort_buffer_size to MAX_ULONGLONG-1
which was not handled gracefully by my_malloc() or safemalloc().
Fixed by ensuring that the malloc functions returns 0 if the size
is too big.
I also added some protection to Aria repair:
- Limit sort_buffer_size to 16G (after that a bigger sort buffer will
not help that much anyway)
- Limit sort_buffer_size also according to sort file size. This will
help by not allocating less memory if someone sets the buffer size too
high.
Added new enum variable `wsrep_mode` which can be used to turn on WSREP
features which are not part of default behaviour.
Added enum `BINLOG_ROW_FORMAT_ONLY`, `REQUIRED_PRIMARY_KEY` and
`STRICT_REPLICATION`. `wsrep-mode=STRICT_REPLICATION` behaves
like variable `wsrep_strict_ddl`.
Variable wsrep_strict_ddl is deprecated and if set we use
new wsrep_mode setting instead.
Reviewed and improved by: Jan Lindström <jan.lindstrom@mariadb.com>
We implement an idea that was suggested by Michael 'Monty' Widenius
in October 2017: When InnoDB is inserting into an empty table or partition,
we can write a single undo log record TRX_UNDO_EMPTY, which will cause
ROLLBACK to clear the table.
For this to work, the insert into an empty table or partition must be
covered by an exclusive table lock that will be held until the transaction
has been committed or rolled back, or the INSERT operation has been
rolled back (and the table is empty again), in lock_table_x_unlock().
Clustered index records that are covered by the TRX_UNDO_EMPTY record
will carry DB_TRX_ID=0 and DB_ROLL_PTR=1<<55, and thus they cannot
be distinguished from what MDEV-12288 leaves behind after purging the
history of row-logged operations.
Concurrent non-locking reads must be adjusted: If the read view was
created before the INSERT into an empty table, then we must continue
to imagine that the table is empty, and not try to read any records.
If the read view was created after the INSERT was committed, then
all records must be visible normally. To implement this, we introduce
the field dict_table_t::bulk_trx_id.
This special handling only applies to the very first INSERT statement
of a transaction for the empty table or partition. If a subsequent
statement in the transaction is modifying the initially empty table again,
we must enable row-level undo logging, so that we will be able to
roll back to the start of the statement in case of an error (such as
duplicate key).
INSERT IGNORE will continue to use row-level logging and locking, because
implementing it would require the ability to roll back the latest row.
Since the undo log that we write only allows us to roll back the entire
statement, we cannot support INSERT IGNORE. We will introduce a
handler::extra() parameter HA_EXTRA_IGNORE_INSERT to indicate to storage
engines that INSERT IGNORE is being executed.
In many test cases, we add an extra record to the table, so that during
the 'interesting' part of the test, row-level locking and logging will
be used.
Replicas will continue to use row-level logging and locking until
MDEV-24622 has been addressed. Likewise, this optimization will be
disabled in Galera cluster until MDEV-24623 enables it.
dict_table_t::bulk_trx_id: The latest active or committed transaction
that initiated an insert into an empty table or partition.
Protected by exclusive table lock and a clustered index leaf page latch.
ins_node_t::bulk_insert: Whether bulk insert was initiated.
trx_t::mod_tables: Use C++11 style accessors (emplace instead of insert).
Unlike earlier, this collection will cover also temporary tables.
trx_mod_table_time_t: Add start_bulk_insert(), end_bulk_insert(),
is_bulk_insert(), was_bulk_insert().
trx_undo_report_row_operation(): Before accessing any undo log pages,
invoke trx->mod_tables.emplace() in order to determine whether undo
logging was disabled, or whether this is the first INSERT and we are
supposed to write a TRX_UNDO_EMPTY record.
row_ins_clust_index_entry_low(): If we are inserting into an empty
clustered index leaf page, set the ins_node_t::bulk_insert flag for
the subsequent trx_undo_report_row_operation() call.
lock_rec_insert_check_and_lock(), lock_prdt_insert_check_and_lock():
Remove the redundant parameter 'flags' that can be checked in the caller.
btr_cur_ins_lock_and_undo(): Simplify the logic. Correctly write
DB_TRX_ID,DB_ROLL_PTR after invoking trx_undo_report_row_operation().
trx_mark_sql_stat_end(), ha_innobase::extra(HA_EXTRA_IGNORE_INSERT),
ha_innobase::external_lock(): Invoke trx_t::end_bulk_insert() so that
the next statement will not be covered by table-level undo logging.
ReadView::changes_visible(trx_id_t) const: New accessor for the case
where the trx_id_t is not read from a potentially corrupted index page
but directly from the memory. In this case, we can skip a sanity check.
row_sel(), row_sel_try_search_shortcut(), row_search_mvcc():
row_sel_try_search_shortcut_for_mysql(),
row_merge_read_clustered_index(): Check dict_table_t::bulk_trx_id.
row_sel_clust_sees(): Replaces lock_clust_rec_cons_read_sees().
lock_sec_rec_cons_read_sees(): Replaced with lower-level code.
btr_root_page_init(): Refactored from btr_create().
dict_index_t::clear(), dict_table_t::clear(): Empty an index or table,
for the ROLLBACK of an INSERT operation.
ROW_T_EMPTY, ROW_OP_EMPTY: Note a concurrent ROLLBACK of an INSERT
into an empty table.
This is joint work with Thirunarayanan Balathandayuthapani,
who created a working prototype.
Thanks to Matthias Leich for extensive testing.
There were multiple problems here
* wsrep_trx_fragment_size should not be set when wsrep is disabled or provider is not loaded
* wsrep_trx_fragment_unit should not be set when wsrep is disabled or provider is not loaded
* wsrep_debug has no effect if wsrep is disabled or provider is not loaded
* wsrep_start_position should not be set when wsrep is disabled or provider is not loaded any other value than default
* wsrep_start_position should be changed only when we are joiner or initialized
* wsrep_start_position should be allowed to set only a value that exits, thus
we need to add error handling to wsrep_sst_complete
Actual assertion mentioned on MDEV seems to be already fixed but
setting seqno to -2 will trigger a different assertion
mysqld: /home/jan/mysql/10.4-bugs/wsrep-lib/src/server_state.cpp:702: void wsrep::server_state::sst_received(wsrep::client_service&, int): Assertion `state_ == s_joiner || state_ == s_initialized' failed.
Fixed this by not allowing user to set seqno < -1 (-1 is special
seqno meaning undefined and seqno is initialized to it). MariaDB
releases 10.2 and 10.3 already do not allow to set seqno < -1.
