lock_rec_unlock_unmodified() is executed either under lock_sys.wr_lock()
or under a combination of lock_sys.rd_lock() + record locks hash table
cell latch. It also requests page latch to check if locked records were
changed by the current transaction or not.
Usually InnoDB requests page latch to find the certain record on the
page, and then requests lock_sys and/or record lock hash cell latch to
request record lock. lock_rec_unlock_unmodified() requests the latches
in the opposite order, what causes deadlocks. One of the possible
scenario for the deadlock is the following:
thread 1 - lock_rec_unlock_unmodified() is invoked under locks hash table
cell latch, the latch is acquired;
thread 2 - purge thread acquires page latch and tries to remove
delete-marked record, it invokes lock_update_delete(), which
requests locks hash table cell latch, held by thread 1;
thread 1 - requests page latch, held by thread 2.
To fix it we need to release lock_sys.latch and/or lock hash cell latch,
acquire page latch and re-acquire lock_sys related latches.
When lock_sys.latch and/or lock hash cell latch are released in
lock_release_on_prepare() and lock_release_on_prepare_try(), the page on
which the current lock is held, can be merged. In this case the bitmap
of the current lock must be cleared, and the new lock must be added to
the end of trx->lock.trx_locks list, or bitmap of already existing lock
must be changed.
The new field trx_lock_t::set_nth_bit_calls indicates if new locks
(bits in existing lock bitmaps or new lock objects) were created during
the period when lock_sys was released in trx->lock.trx_locks list
iteration loop in lock_release_on_prepare() or
lock_release_on_prepare_try(). And, if so, we traverse the list again.
The block can be freed during pages merging, what causes assertion
failure in buf_page_get_gen(), as btr_block_get() passes BUF_GET as page
get mode to it. That's why page_get_mode parameter was added to
btr_block_get() to pass BUF_GET_POSSIBLY_FREED from
lock_release_on_prepare() and lock_release_on_prepare_try() to
buf_page_get_gen().
As searching for id of trx, which modified secondary index record, is
quite expensive operation, restrict its usage for master. System variable
was added to remove the restriction for testing simplifying. The
variable exists only either for debug build or for build with
-DINNODB_ENABLE_XAP_UNLOCK_UNMODIFIED_FOR_PRIMARY option to increase the
probability of catching bugs for release build with RQG.
Note that the code, which does primary index lookup to find out what
transaction modified secondary index record, is necessary only when
there is no primary key and no unique secondary key on replica with row
based replication, because only in this case extra X locks on unmodified
records can be set during scan phase.
Reviewed by Marko Mäkelä.
During a query execution some sorting and grouping operations
on strings may be involved. System variable max_sort_length defines
the maximum number of bytes to use when comparing strings during
sorting/grouping. Thus, the comparable parts of strings may be less
than their actual size, so the results of the query may be not
sorted/grouped properly.
To indicate that some comparisons were done on a truncated lengths,
a new warning has been introduced with this commit.
If semi-sync is switched off then on while a transaction is
in-between binlogging and waiting for an ACK, the semi-sync state of
the transaction is removed, leading to a debug assertion that
indicates the transaction tried to wait, but cannot receive an ACK
signal. More specifically, when semi-sync is switched off, the
Active_tranx list is cleared (where a transaction adds an entry to
this list during binlogging), and each entry in this list saves the
thread which will wait for an ACK, and the thread has the COND
variable to signal to wake itself. So if the entry is lost, the
Ack_receiver thread won’t be able to find the thread to wake up when
an ACK comes in
The fix is to ensure that the entry exists before awaiting the ACK,
and if there is no entry, skip the wait. In debug builds, an
informative message is written explaining that the transaction is
skipping its wait. Additional debug-build only logic is added to
ensure that the cause of the missing entry is due to semi-sync being
turned off and on
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
The problem was that when using clang + asan, we do not get a correct value
for the thread stack as some local variables are not allocated at the
normal stack.
It looks like that for example clang 18.1.3, when compiling with
-O2 -fsanitize=addressan it puts local variables and things allocated by
alloca() in other areas than on the stack.
The following code shows the issue
Thread 6 "mariadbd" hit Breakpoint 3, do_handle_one_connection
(connect=0x5080000027b8,
put_in_cache=<optimized out>) at sql/sql_connect.cc:1399
THD *thd;
1399 thd->thread_stack= (char*) &thd;
(gdb) p &thd
(THD **) 0x7fffedee7060
(gdb) p $sp
(void *) 0x7fffef4e7bc0
The address of thd is 24M away from the stack pointer
(gdb) info reg
...
rsp 0x7fffef4e7bc0 0x7fffef4e7bc0
...
r13 0x7fffedee7060 140737185214560
r13 is pointing to the address of the thd. Probably some kind of
"local stack" used by the sanitizer
I have verified this with gdb on a recursive call that calls alloca()
in a loop. In this case all objects was stored in a local heap,
not on the stack.
To solve this issue in a portable way, I have added two functions:
my_get_stack_pointer() returns the address of the current stack pointer.
The code is using asm instructions for intel 32/64 bit, powerpc,
arm 32/64 bit and sparc 32/64 bit.
Supported compilers are gcc, clang and MSVC.
For MSVC 64 bit we are using _AddressOfReturnAddress()
As a fallback for other compilers/arch we use the address of a local
variable.
my_get_stack_bounds() that will return the address of the base stack
and stack size using pthread_attr_getstack() or NtCurrentTed() with
fallback to using the address of a local variable and user provided
stack size.
Server changes are:
- Moving setting of thread_stack to THD::store_globals() using
my_get_stack_bounds().
- Removing setting of thd->thread_stack, except in functions that
allocates a lot on the stack before calling store_globals(). When
using estimates for stack start, we reduce stack_size with
MY_STACK_SAFE_MARGIN (8192) to take into account the stack used
before calling store_globals().
I also added a unittest, stack_allocation-t, to verify the new code.
Reviewed-by: Sergei Golubchik <serg@mariadb.org>
Implement variable legacy_xa_rollback_at_disconnect to support
backwards compatibility for applications that rely on the pre-10.5
behavior for connection disconnect, which is to rollback the
transaction (in violation of the XA specification).
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Fixed by checking handler_stats if it's active instead of
thd->variables.log_slow_verbosity & LOG_SLOW_VERBOSITY_ENGINE.
Reviewed-by: Sergei Petrunia <sergey@mariadb.com>
If a slave replicating an event has waited for more than
@@slave_abort_blocking_timeout for a conflicting metadata lock held by a
non-replication thread, the blocking query is killed to allow replication to
proceed and not be blocked indefinitely by a user query.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
int wsrep_thd_append_key(THD*, const wsrep_key*, int, Wsrep_service_key_type)
CREATE TABLE [SELECT|REPLACE SELECT] is CTAS and idea was that
we force ROW format. However, it was not correctly enforced
and keys were appended before wsrep transaction was started.
At THD::decide_logging_format we should force used stmt binlog
format to ROW in CTAS case and produce a warning if used
binlog format was not ROW.
At ha_innodb::update_row we should not append keys similarly
as in ha_innodb::write_row if sql_command is SQLCOM_CREATE_TABLE.
Improved error logging on ::write_row, ::update_row and ::delete_row
if wsrep key append fails.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
(With trivial fixes by sergey@mariadb.com)
Added option fix_innodb_cardinality to optimizer_adjust_secondary_key_costs
Using fix_innodb_cardinality disables the 'divide by 2' of rec_per_key_int
in InnoDB that in effect doubles the Cardinality for secondary keys.
This has the biggest effect for indexes where a few rows has the same key
value. Using this may also cause table scans for very small tables (which
in some cases may be better than an index scan).
The user visible effect is that 'SHOW INDEX FROM table_name' will for
InnoDB show the true Cardinality (and not 2x the real value). It will
also allow the optimizer to chose a better index in some cases as the
division by 2 could have a bad effect for tables with 2-5 identical values
per key.
A few notes about using fix_innodb_cardinality:
- It has direct affect for SHOW INDEX FROM table_name. SHOW INDEX
will also update the statistics in table share.
- The effect of fix_innodb_cardinality for query plans or EXPLAIN
is only visible after first open of the table. This is why one must
do a flush tables or use SHOW INDEX for the option to take effect.
- Using fix_innodb_cardinality can thus affect all user in their query
plans if they are using the same tables.
Because of this, it is strongly recommended that one uses
optimizer_adjust_secondary_key_costs=fix_innodb_cardinality mainly
in configuration files to not cause issues for other users.
Improve performance of queries like
SELECT * FROM t1 WHERE field = NAME_CONST('a', 4);
by, in this example, replacing the WHERE clause with field = 4
in the case of ref access.
The rewrite is done during fix_fields and we disambiguate this
case from other cases of NAME_CONST by inspecting where we are
in parsing. We rely on THD::where to accomplish this. To
improve performance there, we change the type of THD::where to
be an enumeration, so we can avoid string comparisons during
Item_name_const::fix_fields. Consequently, this patch also
changes all usages of THD::where to conform likewise.
InnoDB transactions may be reused after committed:
- when taken from the transaction pool
- during a DDL operation execution
In this case wsrep flag on trx object is cleared, which may cause wrong
execution logic afterwards (wsrep-related hooks are not run).
Make trx->wsrep flag initialize from THD object only once on InnoDB transaction
start and don't change it throughout the transaction's lifetime.
The flag is reset at commit time as before.
Unconditionally set wsrep=OFF for THD objects that represent InnoDB background
threads.
Make Wsrep_schema::store_view() operate in its own transaction.
Fix streaming replication transactions' fragments rollback to not switch
THD->wsrep value during transaction's execution
(use THD->wsrep_ignore_table as a workaround).
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Apart from better performance when accessing thread local variables,
we'll get rid of things that depend on initialization/cleanup of
pthread_key_t variables.
Where appropriate, use compiler-dependent pre-C++11 thread-local
equivalents, where it makes sense, to avoid initialization check overhead
that non-static thread_local can suffer from.
- Moved writing to binlog_cache from close_thread_tables() to
binlog_commit().
- In select_create() delete cached row events instead of flushing them
to disk. This was done to avoid possible disk write error in this code.
Changes:
- Fixed that MyISAM and Aria parallel repair works with tmp file limit.
This required to add current_thd to all parallel workers and add
protection in my_malloc_size_cb_func() and temp_file_size_cb_func() to
be able to handle shared THD's. I removed the old code in MyISAM to
set current_thd() as only worked when using with virtal indexed
columns and I wanted to keep the Aria and MyISAM code identical.
Other things:
- Improved error messages from Aria parallel repair and
create_internal_tmp_table_from_heap().
Two new variables added:
- max_tmp_space_usage : Limits the the temporary space allowance per user
- max_total_tmp_space_usage: Limits the temporary space allowance for
all users.
New status variables: tmp_space_used & max_tmp_space_used
New field in information_schema.process_list: TMP_SPACE_USED
The temporary space is counted for:
- All SQL level temporary files. This includes files for filesort,
transaction temporary space, analyze, binlog_stmt_cache etc.
It does not include engine internal temporary files used for repair,
alter table, index pre sorting etc.
- All internal on disk temporary tables created as part of resolving a
SELECT, multi-source update etc.
Special cases:
- When doing a commit, the last flush of the binlog_stmt_cache
will not cause an error even if the temporary space limit is exceeded.
This is to avoid giving errors on commit. This means that a user
can temporary go over the limit with up to binlog_stmt_cache_size.
Noteworthy issue:
- One has to be careful when using small values for max_tmp_space_limit
together with binary logging and with non transactional tables.
If a the binary log entry for the query is bigger than
binlog_stmt_cache_size and one hits the limit of max_tmp_space_limit
when flushing the entry to disk, the query will abort and the
binary log will not contain the last changes to the table.
This will also stop the slave!
This is also true for all Aria tables as Aria cannot do rollback
(except in case of crashes)!
One way to avoid it is to use @@binlog_format=statement for
queries that updates a lot of rows.
Implementation:
- All writes to temporary files or internal temporary tables, that
increases the file size, are routed through temp_file_size_cb_func()
which updates and checks the temp space usage.
- Most of the temporary file monitoring is done inside IO_CACHE.
Temporary file monitoring is done inside the Aria engine.
- MY_TRACK and MY_TRACK_WITH_LIMIT are new flags for ini_io_cache().
MY_TRACK means that we track the file usage. TRACK_WITH_LIMIT means
that we track the file usage and we give an error if the limit is
breached. This is used to not give an error on commit when
binlog_stmp_cache is flushed.
- global_tmp_space_used contains the total tmp space used so far.
This is needed quickly check against max_total_tmp_space_usage.
- Temporary space errors are using EE_LOCAL_TMP_SPACE_FULL and
handler errors are using HA_ERR_LOCAL_TMP_SPACE_FULL.
This is needed until we move general errors to it's own error space
so that they cannot conflict with system error numbers.
- Return value of my_chsize() and mysql_file_chsize() has changed
so that -1 is returned in the case my_chsize() could not decrease
the file size (very unlikely and will not happen on modern systems).
All calls to _chsize() are updated to check for > 0 as the error
condition.
- At the destruction of THD we check that THD::tmp_file_space == 0
- At server end we check that global_tmp_space_used == 0
- As a precaution against errors in the tmp_space_used code, one can set
max_tmp_space_usage and max_total_tmp_space_usage to 0 to disable
the tmp space quota errors.
- truncate_io_cache() function added.
- Aria tables using static or dynamic row length are registered in 8K
increments to avoid some calls to update_tmp_file_size().
Other things:
- Ensure that all handler errors are registered. Before, some engine
errors could be printed as "Unknown error".
- Fixed bug in filesort() that causes a assert if there was an error
when writing to the temporay file.
- Fixed that compute_window_func() now takes into account write errors.
- In case of parallel replication, rpl_group_info::cleanup_context()
could call trans_rollback() with thd->error set, which would cause
an assert. Fixed by resetting the error before calling trans_rollback().
- Fixed bug in subselect3.inc which caused following test to use
heap tables with low value for max_heap_table_size
- Fixed bug in sql_expression_cache where it did not overflow
heap table to Aria table.
- Added Max_tmp_disk_space_used to slow query log.
- Fixed some bugs in log_slow_innodb.test
- FLUSH GLOBAL STATUS now resets most global_status_vars.
At this stage, this is mainly to be used for testing.
- FLUSH SESSION STATUS added as an alias for FLUSH STATUS.
- FLUSH STATUS does not require any privilege (before required RELOAD).
- FLUSH GLOBAL STATUS requires RELOAD privilege.
- All global status reset moved to FLUSH GLOBAL STATUS.
- Replication semisync status variables are now reset by
FLUSH GLOBAL STATUS.
- In test cases, the only changes are:
- Replace FLUSH STATUS with FLUSH GLOBAL STATUS
- Replace FLUSH STATUS with FLUSH STATUS; FLUSH GLOBAL STATUS.
This was only done in a few tests where the test was using SHOW STATUS
for both local and global variables.
- Uptime_since_flush_status is now always provided, independent if
ENABLED_PROFILING is enabled when compiling MariaDB.
- @@global.Uptime_since_flush_status is reset on FLUSH GLOBAL STATUS
and @@session.Uptime_since_flush_status is reset on FLUSH SESSION STATUS.
- When connected, @@session.Uptime_since_flush_status is set to 0.
