Added a new wsrep_mode feature DISALLOW_LOCAL_GTID for this.
Nodes can have GTIDs for local transactions in the following scenarios:
A DDL statement is executed with wsrep_OSU_method=RSU set.
A DML statement writes to a non-InnoDB table.
A DML statement writes to an InnoDB table with wsrep_on=OFF set.
If user has set wsrep_mode=DISALLOW_LOCAL_GTID these operations
produce a error ERROR HY000: Galera replication not supported
The reason for this is that Galera can lock LOCK_thd_data for a long time.
Instead of stalling any long running process, like alter or repair table,
because of progress reporting, ignore the progress reporting for this
call. Progress reporting will continue on the next call after the lock has
been released.
* reuse the loop in THD::abort_current_cond_wait, don't duplicate it
* find_thread_by_id should return whatever it has found, it's the
caller's task not to kill COM_DAEMON (if the caller's a killer)
and other minor changes
We implement an idea that was suggested by Michael 'Monty' Widenius
in October 2017: When InnoDB is inserting into an empty table or partition,
we can write a single undo log record TRX_UNDO_EMPTY, which will cause
ROLLBACK to clear the table.
For this to work, the insert into an empty table or partition must be
covered by an exclusive table lock that will be held until the transaction
has been committed or rolled back, or the INSERT operation has been
rolled back (and the table is empty again), in lock_table_x_unlock().
Clustered index records that are covered by the TRX_UNDO_EMPTY record
will carry DB_TRX_ID=0 and DB_ROLL_PTR=1<<55, and thus they cannot
be distinguished from what MDEV-12288 leaves behind after purging the
history of row-logged operations.
Concurrent non-locking reads must be adjusted: If the read view was
created before the INSERT into an empty table, then we must continue
to imagine that the table is empty, and not try to read any records.
If the read view was created after the INSERT was committed, then
all records must be visible normally. To implement this, we introduce
the field dict_table_t::bulk_trx_id.
This special handling only applies to the very first INSERT statement
of a transaction for the empty table or partition. If a subsequent
statement in the transaction is modifying the initially empty table again,
we must enable row-level undo logging, so that we will be able to
roll back to the start of the statement in case of an error (such as
duplicate key).
INSERT IGNORE will continue to use row-level logging and locking, because
implementing it would require the ability to roll back the latest row.
Since the undo log that we write only allows us to roll back the entire
statement, we cannot support INSERT IGNORE. We will introduce a
handler::extra() parameter HA_EXTRA_IGNORE_INSERT to indicate to storage
engines that INSERT IGNORE is being executed.
In many test cases, we add an extra record to the table, so that during
the 'interesting' part of the test, row-level locking and logging will
be used.
Replicas will continue to use row-level logging and locking until
MDEV-24622 has been addressed. Likewise, this optimization will be
disabled in Galera cluster until MDEV-24623 enables it.
dict_table_t::bulk_trx_id: The latest active or committed transaction
that initiated an insert into an empty table or partition.
Protected by exclusive table lock and a clustered index leaf page latch.
ins_node_t::bulk_insert: Whether bulk insert was initiated.
trx_t::mod_tables: Use C++11 style accessors (emplace instead of insert).
Unlike earlier, this collection will cover also temporary tables.
trx_mod_table_time_t: Add start_bulk_insert(), end_bulk_insert(),
is_bulk_insert(), was_bulk_insert().
trx_undo_report_row_operation(): Before accessing any undo log pages,
invoke trx->mod_tables.emplace() in order to determine whether undo
logging was disabled, or whether this is the first INSERT and we are
supposed to write a TRX_UNDO_EMPTY record.
row_ins_clust_index_entry_low(): If we are inserting into an empty
clustered index leaf page, set the ins_node_t::bulk_insert flag for
the subsequent trx_undo_report_row_operation() call.
lock_rec_insert_check_and_lock(), lock_prdt_insert_check_and_lock():
Remove the redundant parameter 'flags' that can be checked in the caller.
btr_cur_ins_lock_and_undo(): Simplify the logic. Correctly write
DB_TRX_ID,DB_ROLL_PTR after invoking trx_undo_report_row_operation().
trx_mark_sql_stat_end(), ha_innobase::extra(HA_EXTRA_IGNORE_INSERT),
ha_innobase::external_lock(): Invoke trx_t::end_bulk_insert() so that
the next statement will not be covered by table-level undo logging.
ReadView::changes_visible(trx_id_t) const: New accessor for the case
where the trx_id_t is not read from a potentially corrupted index page
but directly from the memory. In this case, we can skip a sanity check.
row_sel(), row_sel_try_search_shortcut(), row_search_mvcc():
row_sel_try_search_shortcut_for_mysql(),
row_merge_read_clustered_index(): Check dict_table_t::bulk_trx_id.
row_sel_clust_sees(): Replaces lock_clust_rec_cons_read_sees().
lock_sec_rec_cons_read_sees(): Replaced with lower-level code.
btr_root_page_init(): Refactored from btr_create().
dict_index_t::clear(), dict_table_t::clear(): Empty an index or table,
for the ROLLBACK of an INSERT operation.
ROW_T_EMPTY, ROW_OP_EMPTY: Note a concurrent ROLLBACK of an INSERT
into an empty table.
This is joint work with Thirunarayanan Balathandayuthapani,
who created a working prototype.
Thanks to Matthias Leich for extensive testing.
Some DML operations on tables having unique secondary keys cause scanning
in the secondary index, for instance to find potential unique key violations
in the seconday index. This scanning may involve GAP locking in the index.
As this locking happens also when applying replication events in high priority
applier threads, there is a probabality for lock conflicts between two wsrep
high priority threads.
This PR avoids lock conflicts of high priority wsrep threads, which do
secondary index scanning e.g. for duplicate key detection.
The actual fix is the patch in sql_class.cc:thd_need_ordering_with(), where
we allow relaxed GAP locking protocol between wsrep high priority threads.
wsrep high priority threads (replication appliers, replayers and TOI processors)
are ordered by the replication provider, and they will not need serializability
support gained by secondary index GAP locks.
PR contains also a mtr test, which exercises a scenario where two replication
applier threads have a false positive conflict in GAP of unique secondary index.
The conflicting local committing transaction has to replay, and the test verifies
also that the replaying phase will not conflict with the latter repllication applier.
Commit also contains new test scenario for galera.galera_UK_conflict.test,
where replayer starts applying after a slave applier thread, with later seqno,
has advanced to commit phase. The applier and replayer have false positive GAP
lock conflict on secondary unique index, and replayer should ignore this.
This test scenario caused crash with earlier version in this PR, and to fix this,
the secondary index uniquenes checking has been relaxed even further.
Now innodb trx_t structure has new member: bool wsrep_UK_scan, which is set to
true, when high priority thread is performing unique secondary index scanning.
The member trx_t::wsrep_UK_scan is defined inside WITH_WSREP directive, to make
it possible to prepare a MariaDB build where this additional trx_t member is
not present and is not used in the code base. trx->wsrep_UK_scan is set to true
only for the duration of function call for: lock_rec_lock() trx->wsrep_UK_scan
is used only in lock_rec_has_to_wait() function to relax the need to wait if
wsrep_UK_scan is set and conflicting transaction is also high priority.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Server part:
kill_handlerton() was accessing thd->ha_data[] for some other thd,
while it could be concurrently modified by its owner thd.
protect thd->ha_data[] modifications with a mutex.
require this mutex when accessing thd->ha_data[] from kill_handlerton.
InnoDB part:
on close_connection, detach trx from thd before freeing the trx
This reverts the server part of the commit 775fccea0
but keeps InnoDB part (which reverted MDEV-17092 5530a93f4).
So after this both MDEV-23536 and MDEV-17092 are reverted,
and the original bug is resurrected.
A race condition may occur between the execution of transaction commit,
and an execution of a KILL statement that would attempt to abort that
transaction.
MDEV-17092 worked around this race condition by modifying InnoDB code.
After that issue was closed, Sergey Vojtovich pointed out that this
race condition would better be fixed above the storage engine layer:
If you look carefully into the above, you can conclude that
thd->free_connection() can be called concurrently with
KILL/thd->awake(). Which is the bug. And it is partially fixed in
THD::~THD(), that is destructor waits for KILL completion:
Fix: Add necessary mutex operations to THD::free_connection()
and move WSREP specific code also there. This ensures that no
one is using THD while we do free_connection(). These mutexes
will also ensures that there can't be concurrent KILL/THD::awake().
innobase_kill_query
We can now remove usage of trx_sys_mutex introduced on MDEV-17092.
trx_t::free()
Poison trx->state and trx->mysql_thd
This patch is validated with an RQG run similar to the one that
reproduced MDEV-17092.
Analysis: select into outfile creates files everytime with 666 permission,
regardsless if umask environment variables and umask settings on OS level.
It seems hardcoded.
Fix: change 0666 to 0644 which will let anybody consume the file but not
change it.
The reason for the failure is that
thd->mdl_context.release_transactional_locks()
was called after commit & rollback even in cases where the current
transaction is still active.
For 10.2, 10.3 and 10.4 the fix is simple:
- Replace all calls to thd->mdl_context.release_transactional_locks() with
thd->release_transactional_locks(). The thd function will only call
the mdl_context function if there are no active transactional locks.
In 10.6 we will better fix where we will change the return value for
some trans_xxx() functions to indicate if transaction did close the
transaction or not. This will avoid the need of the indirect call.
Other things:
- trans_xa_commit() and trans_xa_rollback() will automatically
call release_transactional_locks() if the transaction is closed.
- We can't do that for the other functions as the caller of many of these
are doing additional work (like close_thread_tables) before calling
release_transactional_locks().
- Added missing abort_result_set() and missing DBUG_RETURN in
select_create::send_eof()
- Fixed wrong indentation in injector::transaction::commit()
This follows up commit
commit 94a520ddbe and
commit 7c5519c12d.
After these changes, the default test suites on a
cmake -DWITH_UBSAN=ON build no longer fail due to passing
null pointers as parameters that are declared to never be null,
but plenty of other runtime errors remain.
MDEV-20945: BACKUP UNLOCK + FTWRL assertion failure | SIGSEGV in I_P_List
from MDL_context::release_lock on INSERT w/ BACKUP LOCK (on optimized
builds) | Assertion `ticket->m_duration == MDL_EXPLICIT' failed
BACKUP LOCK behavior is modified so it won't be used wrong:
- BACKUP LOCK should commit any active transactions.
- BACKUP LOCK should not be allowed in stored procedures.
- When BACKUP LOCK is active, don't allow any DDL's for that connection.
- FTWRL is forbidden on the same connection while BACKUP LOCK is active.
Reviewed-by: monty@mariadb.com
This commit fixed the problems with S3 after the "DROP TABLE FORCE" changes.
It also fixes all failing replication S3 tests.
A slave is delayed if it is trying to execute replicated queries on a
table that is already converted to S3 by the master later in the binlog.
Fixes for replication events on S3 tables for delayed slaves:
- INSERT and INSERT ... SELECT and CREATE TABLE are ignored but written
to the binary log. UPDATE & DELETE will be fixed in a future commit.
Other things:
- On slaves with --s3-slave-ignore-updates set, allow S3 tables to be
opened in read-write mode. This was done to be able to
ignore-but-replicate queries like insert. Without this change any
open of an S3 table failed with 'Table is read only' which is too
early to be able to replicate the original query.
- Errors are now printed if handler::extra() call fails in
wait_while_tables_are_used().
- Error message for row changes are changed from HA_ERR_WRONG_COMMAND
to HA_ERR_TABLE_READONLY.
- Disable some maria_extra() calls for S3 tables. This could cause
S3 tables to fail in some cases.
- Added missing thr_lock_delete() to ma_open() in case of failure.
- Removed from mysql_prepare_insert() the not needed argument 'table'.
The setting innodb_lock_schedule_algorithm=VATS that was introduced
in MDEV-11039 (commit 021212b525)
causes conflicting exclusive locks to be incorrectly granted to
two transactions. Specifically, in lock_rec_insert_by_trx_age()
the predicate !lock_rec_has_to_wait_in_queue(in_lock) would hold even
though an active transaction is already holding an exclusive lock.
This was observed between two DELETE of the same clustered index record.
The HASH_DELETE invocation in lock_rec_enqueue_waiting() may be related.
Due to lack of progress in diagnosing the problem, we will remove the
option. The unsafe option was enabled by default between
commit 0c15d1a6ff (MariaDB 10.2.3)
and the parent of
commit 1cc1d0429d (MariaDB 10.2.17, 10.3.9),
and it was deprecated in
commit 295e2d500b (MariaDB 10.2.34).
MDEV-21953 deadlock between BACKUP STAGE BLOCK_COMMIT and parallel
replication
Fixed by partly reverting MDEV-21953 to put back MDL_BACKUP_COMMIT locking
before log_and_order.
The original problem for MDEV-21953 was that while a thread was waiting in
for another threads to commit in 'log_and_order', it had the
MDL_BACKUP_COMMIT lock. The backup thread was waiting to get the
MDL_BACKUP_WAIT_COMMIT lock, which blocks all new MDL_BACKUP_COMMIT locks.
This causes a deadlock as the waited-for thread can never get past the
MDL_BACKUP_COMMIT lock in ha_commit_trans.
The main part of the bug fix is to release the MDL_BACKUP_COMMIT lock while
a thread is waiting for other 'previous' threads to commit. This ensures
that no transactional thread keeps MDL_BACKUP_COMMIT while waiting, which
ensures that there are no deadlocks anymore.
Protocol_local fixed so it can be used now.
Some Protocol:: methods made virtual so they can adapt.
as well as net_ok and net_send_error functions.
execute_sql_string function is exported to the plugins.
To be changed with the mysql_use_result.
