Apply the patch based on the patch by Varun Gupta:
PARAM::is_ror_scan might be used unitialized when check_quick_select()
is invoked for a "degenerate" SEL_ARG tree (e.g. one having type
SEL_ARG::IMPOSSIBLE).
Make check_quick_select() always initialize PARAM::is_ror_scan.
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
Basic variant of the fix: do not consider conditions in form
unique_key NOT IN (c1,c2...)
to be sargable. If there are only a few constants, the condition
is not selective. If there are a lot constants, the overhead of
processing such a huge range list is not worth it.
(Backport to 10.2)
Basic variant of the fix: do not consider conditions in form
unique_key NOT IN (c1,c2...)
to be sargable. If there are only a few constants, the condition
is not selective. If there are a lot constants, the overhead of
processing such a huge range list is not worth it.
This bug could manifest itself for a query with WHERE condition containing
top level OR formula such that each conjunct contained a single-range
condition supported by the same index. One of these range conditions must
be fully covered by another range condition that is used later in the OR
formula. Additionally at least one of these condition should be ANDed with
a sargable range condition supported by a different index.
There were several attempts to fix related problems for OR conditions after
the backport of range optimizer code from MySQL (commit
0e19f3e36f). Unfortunately the first of these
fixes contained typo remained unnoticed until recently. This typo bug led
to rejection of valid range accesses. This patch fixed this typo bug.
The fix revealed another two bugs: one in a constructor for SEL_ARG,
the other in the function tree_or(). Both are fixed in this patch.
Part#1: Revert the patch that caused it:
commit 291be49474
Author: Igor Babaev <igor@askmonty.org>
Date: Thu Sep 24 22:02:00 2020 -0700
MDEV-23811: With large number of indexes optimizer chooses an inefficient plan
This bug could manifest itself for a query with WHERE condition containing
top level OR formula such that each conjunct contained a single-range
condition supported by the same index. One of these range conditions must
be fully covered by another range condition that is used later in the OR
formula. Additionally at least one of these condition should be ANDed with
a sargable range condition supported by a different index.
There were several attempts to fix related problems for OR conditions after
the backport of range optimizer code from MySQL (commit
0e19f3e36f). Unfortunately the first of these
fixes contained typo remained unnoticed until recently. This typo bug led
to rejection of valid range accesses. This patch fixed this typo bug.
The fix revealed another two bugs: one in a constructor for SEL_ARG,
the other in the function tree_or(). Both are fixed in this patch.
- Some of the bug fixes are backports from 10.5!
- The fix in innobase/fil/fil0fil.cc is just a backport to get less
error messages in mysqld.1.err when running with valgrind.
- Renamed HAVE_valgrind_or_MSAN to HAVE_valgrind
Fixed by:
- Make all quick_* variable allocated according to real number keys instead
of MAX_KEY
- Store all the quick* items in separated allocated structure (OPT_RANGE)
- Ensure we don't access any quick* variable without first checking
opt_range_keys.is_set(). Thanks to this, we don't need any
pre-initialization of quick* variables anymore.
Some renames was done to use the new structure:
table->quick_keys -> table->opt_range_keys
table->quick_rows[X] -> table->opt_range[X].rows
table->quick_key_parts[X] -> table->opt_range[X].key_parts
table->quick_costs[X] -> table->opt_range[X].cost
table->quick_index_only_costs[X] -> table->opt_range[X].index_only_cost
table->quick_n_ranges[X] -> table->opt_range[X].ranges
table->quick_condition_rows -> table->opt_range_condition_rows
This patch should both decrease memory needed for TABLE objects
(3528 -> 984 + keyinfo) and increase performance, thanks to less
initializations per query, and more localized memory, thanks to the
opt_range structure.
Make sure to initialize members of TABLE::reginfo when TABLE::init is called. In this case the problem
was that table->reginfo.join_tab was set for the SELECT query and then was reused by the UPDATE query.
This case occurred only when the SELECT query had a degenerate join.
KEY_MULTI_RANGE::range_flag does not have correct flag bits for
per-endpoint flags (NEAR_MIN, NEAR_MAX, NO_MIN_RANGE, NO_MAX_RANGE).
It only has bits for flags that describe both endpoints.
So
- Document this.
- Switch optimizer trace to using {start|end}_key.flag values, instead.
This fixes the bug.
- Switch records_in_column_ranges() to doing that too. (This used to
work, because KEY_MULTI_RANGE::range_flag had correct flag value
for the last key component, and EITS only uses one-component
pseudo-indexes)
