Problem was that transacton was BF-aborted after certification
succeeded and transaction tried to rollback and during
rollback binlog stmt cache containing sequence value reservations
was written into binlog.
Transaction must replay because certification succeeded but
transaction must not be written into binlog yet, it will
be done during commit after the replay.
Fix is to skip binlog write if transaction must replay and
in replay we need to reset binlog stmt cache.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was missing case from wsrep_handle_mdl_conflict. Test case
was trying to confirm that LOCK TABLE thread is not BF-aborted.
However as case was missing it was BF-aborted. Test case passed
because BF-aborting takes time and used wait condition might
see expected thread status before it was BF-aborted. Test naturally
failed if BF-aborting was done early enough.
Fix is to add missing case for SQLCOM_LOCK_TABLES to
wsrep_handle_mdl_conflict.
Note that using LOCK TABLE is still not recomended on cluster
because it could cause cluster hang.
This is a 10.5 specific commit that will then be overridden by
another one for 10.6+.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
For some reason InnoDB was disabled at --wsrep-recover call.
Added --loose-innodb to command like to make sure InnoDB is
enabled.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
While applying CTAS log event, we peek the relay log to see if CTAS
contains inserted rows or if it's empty.
The peek function didn't check for end-of-file condition when tried to
get the next event from the log, and thus it hanged.
The fix includes checking for end-of-file while peeking for log events
and considering returned XID_EVENT value as a sign of an empty CTAS.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Modified test configuration file to use wsrep_sync_wait
to make sure committed transactions are replicated before
next operation.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The test that triggers multi-master conflict between two CTAS commands
uses LOCK/UNLOCK TABLES to block local CTAS from progress. It could
result in a race when UNLOCK TABLES command is issued a bit earlier
then needed, causing local CTAS to run further and change wsrep
transaction state, so that a different code path is taken later and
the original error gets overridden, causing the test to fail.
The solution is to replace LOCK/UNLOCK TABLES with debug sync points.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Replicated events have time associated with them from originating
node which will be used for commit timestamp. Associated time can
be set in past before event is even applied.
For WSREP replication we don't need to use time information from
event.
Addressed review comments:
Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Tests using MW-369.inc sometimes hanged after
signaling two debug sync points inside a Galera
library. Replaced Galera library sync point
with server code sync point when possible and
added more wait_conditions to make sure we are
in correct state.
Tests effected: MW-369, MW-402, MDEV-27276, and
mysql-wsrep#332.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This commit contains a fix for the code that extracts and parses
the CN (common name, domain name) record from certificates using
the openssl utility. This code is also made common to the rsync
and mariabackup scripts. There is also some systematization of
the use of 'printf' and 'echo' builtins/utilities.
AES block cipher mode CTR is available at the moment
only from OpenSSL 1.0.1. Do not run this testcase
using CTR combination if it is not available.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This test happens to fail if it runs after test
galera_inject_bf_long_wait.
And the reason is that galera_bf_lock_wait greps for message
"BF lock wait long" in the error log, and expects that grep matches
no lines. Whereas galera_inject_bf_long_wait intentionally causes the
message to appear in the log. The fix consists in using
assert_grep.inc with option assert_only_after, such that
galera_bf_lock_wait is limited to grep only those lines that appeared
in the log after it started to execute.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that if wsrep_notify_cmd was set it was called
with a new status "joined" it tries to connect to the server
to update some table, but the server isn't initialized yet,
it's not listening for connections. So the server waits for the
script to finish, script waits for mariadb client to connect,
and the client cannot connect, because the server isn't listening.
Fix is to call script only when Galera has already formed a
view or when it is synched or donor.
This fix also enables following test cases:
* galera.MW-284
* galera.galera_binlog_checksum
* galera_var_notify_ssl_ipv6
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This is a backport from 10.5.
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
* Delete tests that are not supported and not going to be supported
any time soon
* Fix result set on tests that are not run on bb
* Fix tests that fail because of auto increment offset
* Make sure that disabled tests have open bug report
This commit fixes a crash reported as MDEV-28377 and a number
of other crashes in automated tests with mtr that are related
to broken .cnf files in galera and galera_3nodes suites, which
happened when automatically migrating MDEV-26171 from 10.3 to
subsequent higher versions.
Fix a possible crash on my_free() due to the use of strdup() versus
my_strdup(), and a memory leak.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
MDEV-27025 allows to insert records before the record on which DELETE is
locked, as a result the DELETE misses those records, what causes serious ACID
violation.
Revert MDEV-27025, MDEV-27550. The test which shows the scenario of ACID
violation is added.
Remove calls to wsrep_append_fk_parent_table() during REPAIR/OPTIMIZE
TABLE processing. It turns out that REPAIR or OPTIMIZE commands on
table t, do not acquire MDL locks on parent tables of t (as shown in
the included test). Thus making wsrep_append_fk_parent_table()
unnecessary for OPTIMIZE and REPAIR.
This also fixes MDEV-24446 and reenables test galera.mysql-wsrep#198.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
