SUPER privilege used to allow various actions that were alternatively
allowed by one of BINLOG ADMIN, BINLOG MONITOR, BINLOG REPLAY,
CONNECTION ADMIN, FEDERATED ADMIN, REPL MASTER ADMIN, REPL SLAVE ADMIN,
SET USER, SLAVE MONITOR.
Now SUPER no longer does that, one has to grant one of the fine-grained
privileges above to be to perform corresponding actions.
On upgrade from MariaDB versions 10.11 and below all the privileges
above are granted automatically if the user has SUPER.
As a side-effect, such an upgrade will allow SUPER-user to run SHOW
BINLOG EVENTS, SHOW RELAYLOG EVENTS, SHOW SLAVE HOSTS, even if he wasn't
able to do it before the upgrade.
This includes all test changes from
"Changing all cost calculation to be given in milliseconds"
and forwards.
Some of the things that caused changes in the result files:
- As part of fixing tests, I added 'echo' to some comments to be able to
easier find out where things where wrong.
- MATERIALIZED has now a higher cost compared to X than before. Because
of this some MATERIALIZED types have changed to DEPENDEND SUBQUERY.
- Some test cases that required MATERIALIZED to repeat a bug was
changed by adding more rows to force MATERIALIZED to happen.
- 'Filtered' in SHOW EXPLAIN has in many case changed from 100.00 to
something smaller. This is because now filtered also takes into
account the smallest possible ref access and filters, even if they
where not used. Another reason for 'Filtered' being smaller is that
we now also take into account implicit filtering done for subqueries
using FIRSTMATCH.
(main.subselect_no_exists_to_in)
This is caluculated in best_access_path() and stored in records_out.
- Table orders has changed because more accurate costs.
- 'index' and 'ALL' for small tables has changed to use 'range' or
'ref' because of optimizer_scan_setup_cost.
- index can be changed to 'range' as 'range' optimizer assumes we don't
have to read the blocks from disk that range optimizer has already read.
This can be confusing in the case where there is no obvious where clause
but instead there is a hidden 'key_column > NULL' added by the optimizer.
(main.subselect_no_exists_to_in)
- Scan on primary clustered key does not report 'Using Index' anymore
(It's a table scan, not an index scan).
- For derived tables, the number of rows is now 100 instead of 2,
which can be seen in EXPLAIN.
- More tests have "Using index for group by" as the cost of this
optimization is now more correct (lower).
- A primary key could be preferred for a normal key, even if it would
access more rows, as it's faster to do 1 lokoup and 3 'index_next' on a
clustered primary key than one lookup trough a secondary.
(main.stat_tables_innodb)
Notes:
- There was a 4.7% more calls to best_extension_by_limited_search() in
the main.greedy_optimizer test. However examining the test results
it looked that the plans where slightly better (eq_ref where more
chained together) so I assume this is ok.
- I have verified a few test cases where there was notable/unexpected
changes in the plan and in all cases the new optimizer plans where
faster. (main.greedy_optimizer and some others)
Increasing the data type from char(32) to char(64) for
the following system columns:
- mysql.event.collation_connection
- mysql.event.db_collation
- mysql.proc.collation_connection
- mysql.proc.db_collation
This change was forgotten during MDEV-27009.
Also fixing the comment "Start/End of 10.9 tests" in ctype_utf8_uca.test
to "Start/End of 10.10 tests", as MDEV-27009 was actually
released in 10.10.
- Added missing information about database of corresponding table for various types of commands
- Update some typos
- Reviewed by: <vicentiu@mariadb.org>
- Added one neutral and 22 tailored (language specific) collations based on
Unicode Collation Algorithm version 14.0.0.
Collations were added for Unicode character sets
utf8mb3, utf8mb4, ucs2, utf16, utf32.
Every tailoring was added with four accent and case
sensitivity flag combinations, e.g:
* utf8mb4_uca1400_swedish_as_cs
* utf8mb4_uca1400_swedish_as_ci
* utf8mb4_uca1400_swedish_ai_cs
* utf8mb4_uca1400_swedish_ai_ci
and their _nopad_ variants:
* utf8mb4_uca1400_swedish_nopad_as_cs
* utf8mb4_uca1400_swedish_nopad_as_ci
* utf8mb4_uca1400_swedish_nopad_ai_cs
* utf8mb4_uca1400_swedish_nopad_ai_ci
- Introducing a conception of contextually typed named collations:
CREATE DATABASE db1 CHARACTER SET utf8mb4;
CREATE TABLE db1.t1 (a CHAR(10) COLLATE uca1400_as_ci);
The idea is that there is no a need to specify the character set prefix
in the new collation names. It's enough to type just the suffix
"uca1400_as_ci". The character set is taken from the context.
In the above example script the context character set is utf8mb4.
So the CREATE TABLE will make a column with the collation
utf8mb4_uca1400_as_ci.
Short collations names can be used in any parts of the SQL syntax
where the COLLATE clause is understood.
- New collations are displayed only one time
(without character set combinations) by these statements:
SELECT * FROM INFORMATION_SCHEMA.COLLATIONS;
SHOW COLLATION;
For example, all these collations:
- utf8mb3_uca1400_swedish_as_ci
- utf8mb4_uca1400_swedish_as_ci
- ucs2_uca1400_swedish_as_ci
- utf16_uca1400_swedish_as_ci
- utf32_uca1400_swedish_as_ci
have just one entry in INFORMATION_SCHEMA.COLLATIONS and SHOW COLLATION,
with COLLATION_NAME equal to "uca1400_swedish_as_ci", which is the suffix
without the character set name:
SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.COLLATIONS
WHERE COLLATION_NAME LIKE '%uca1400_swedish_as_ci';
+-----------------------+
| COLLATION_NAME |
+-----------------------+
| uca1400_swedish_as_ci |
+-----------------------+
Note, the behaviour of old collations did not change.
Non-unicode collations (e.g. latin1_swedish_ci) and
old UCA-4.0.0 collations (e.g. utf8mb4_unicode_ci)
are still displayed with the character set prefix, as before.
- The structure of the table INFORMATION_SCHEMA.COLLATIONS was changed.
The NOT NULL constraint was removed from these columns:
- CHARACTER_SET_NAME
- ID
- IS_DEFAULT
and from the corresponding columns in SHOW COLLATION.
For example:
SELECT COLLATION_NAME, CHARACTER_SET_NAME, ID, IS_DEFAULT
FROM INFORMATION_SCHEMA.COLLATIONS
WHERE COLLATION_NAME LIKE '%uca1400_swedish_as_ci';
+-----------------------+--------------------+------+------------+
| COLLATION_NAME | CHARACTER_SET_NAME | ID | IS_DEFAULT |
+-----------------------+--------------------+------+------------+
| uca1400_swedish_as_ci | NULL | NULL | NULL |
+-----------------------+--------------------+------+------------+
The NULL value in these columns now means that the collation
is applicable to multiple character sets.
The behavioir of old collations did not change.
Make sure your client programs can handle NULL values in these columns.
- The structure of the table
INFORMATION_SCHEMA.COLLATION_CHARACTER_SET_APPLICABILITY was changed.
Three new NOT NULL columns were added:
- FULL_COLLATION_NAME
- ID
- IS_DEFAULT
New collations have multiple entries in COLLATION_CHARACTER_SET_APPLICABILITY.
The column COLLATION_NAME contains the collation name without the character
set prefix. The column FULL_COLLATION_NAME contains the collation name with
the character set prefix.
Old collations have full collation name in both FULL_COLLATION_NAME and
COLLATION_NAME.
SELECT COLLATION_NAME, FULL_COLLATION_NAME, CHARACTER_SET_NAME, ID, IS_DEFAULT
FROM INFORMATION_SCHEMA.COLLATION_CHARACTER_SET_APPLICABILITY
WHERE FULL_COLLATION_NAME RLIKE '^(utf8mb4|latin1).*swedish.*ci$';
+-----------------------------+-------------------------------------+--------------------+------+------------+
| COLLATION_NAME | FULL_COLLATION_NAME | CHARACTER_SET_NAME | ID | IS_DEFAULT |
+-----------------------------+-------------------------------------+--------------------+------+------------+
| latin1_swedish_ci | latin1_swedish_ci | latin1 | 8 | Yes |
| latin1_swedish_nopad_ci | latin1_swedish_nopad_ci | latin1 | 1032 | |
| utf8mb4_swedish_ci | utf8mb4_swedish_ci | utf8mb4 | 232 | |
| uca1400_swedish_ai_ci | utf8mb4_uca1400_swedish_ai_ci | utf8mb4 | 2368 | |
| uca1400_swedish_as_ci | utf8mb4_uca1400_swedish_as_ci | utf8mb4 | 2370 | |
| uca1400_swedish_nopad_ai_ci | utf8mb4_uca1400_swedish_nopad_ai_ci | utf8mb4 | 2372 | |
| uca1400_swedish_nopad_as_ci | utf8mb4_uca1400_swedish_nopad_as_ci | utf8mb4 | 2374 | |
+-----------------------------+-------------------------------------+--------------------+------+------------+
- Other INFORMATION_SCHEMA queries:
SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.COLUMNS;
SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.PARAMETERS;
SELECT TABLE_COLLATION FROM INFORMATION_SCHEMA.TABLES;
SELECT DEFAULT_COLLATION_NAME FROM INFORMATION_SCHEMA.SCHEMATA;
SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.ROUTINES;
SELECT COLLATION_CONNECTION FROM INFORMATION_SCHEMA.EVENTS;
SELECT DATABASE_COLLATION FROM INFORMATION_SCHEMA.EVENTS;
SELECT COLLATION_CONNECTION FROM INFORMATION_SCHEMA.ROUTINES;
SELECT DATABASE_COLLATION FROM INFORMATION_SCHEMA.ROUTINES;
SELECT COLLATION_CONNECTION FROM INFORMATION_SCHEMA.TRIGGERS;
SELECT DATABASE_COLLATION FROM INFORMATION_SCHEMA.TRIGGERS;
SELECT COLLATION_CONNECTION FROM INFORMATION_SCHEMA.VIEWS;
display full collation names, including character sets prefix,
for all collations, including new collations.
Corresponding SHOW commands also display full collation names
in collation related columns:
SHOW CREATE TABLE t1;
SHOW CREATE DATABASE db1;
SHOW TABLE STATUS;
SHOW CREATE FUNCTION f1;
SHOW CREATE PROCEDURE p1;
SHOW CREATE EVENT ev1;
SHOW CREATE TRIGGER tr1;
SHOW CREATE VIEW;
These INFORMATION_SCHEMA queries and SHOW statements may change in
the future, to display show collation names.
