Re-execution of a query containing subquery in the FROM clause results
in assert failure in case the query is run as part of a stored routine or
as a prepared statement AND derived table merge optimization is off.
As an example, the following test case
CREATE TABLE t1 (a INT) ;
CREATE PROCEDURE sp() SELECT * FROM (SELECT a FROM t1) tb;
CALL sp();
SET optimizer_switch='derived_merge=off';
CALL sp();
results in assert failure on the second invocation of the 'sp' stored routine.
The reason for assertion failure is that the expression
derived->is_excluded()
returns the value true where the value false expected.
The method is_excluded() returns the value true for a derived table
that has been merged to a parent select. Such transformation happens as part
of Derived Table Merge Optimization that is performed on first invocation of
a stored routine or a prepared statement containing a query with subquery
in the FROM clause of the main SELECT.
When the same routine or prepared statement is run the second time and
Derived Table Merge Optimization is OFF the MariaDB server tries to materialize
a derived table specified by the subquery that fails since this subquery
has already been merged to the top-most SELECT. This transformation is permanent
and can't be reverted. That is the reason why the assert
DBUG_ASSERT(!derived->is_excluded());
fails inside the function TABLE_LIST::set_check_materialized().
Similar behaviour can be observed in case a stored routine or prepared statement
containing a SELECT statement with subquery in the FROM clause, first is run
with the optimizer_switch option set to derived_merge=off and re-run after this
option has been switched to derived_merge=on. In this case a derived table for
subquery is materialized on the first execution and marked as merged derived
table on the second execution that results in error with misleading error
message:
MariaDB [test]> CALL sp1();
ERROR 1030 (HY000): Got error 1 "Operation not permitted" from storage engine MEMORY
To fix the issue, a derived table that has been already optimized shouldn't be
re-marked for one more round of optimization.
One significant consequence following from suggested change is that the data
member TABLE_LIST::derived_type is not updated once the table optimization
has been done. This fact should be taken into account when Prepared Statement
being handled since once a table listed in a query has been optimized on
execution of the statement PREPARE FROM it won't be touched anymore on handling
the statement EXECUTE.
One side effect caused by this change could be observed for the following
test case:
CREATE TABLE t1 (s1 INT);
CREATE VIEW v1 AS
SELECT s1,s2 FROM (SELECT s1 as s2 FROM t1 WHERE s1 <100) x, t1 WHERE t1.s1=x.s2;
INSERT INTO v1 (s1) VALUES (-300);
PREPARE stmt FROM "INSERT INTO v1 (s1) VALUES (-300)";
EXECUTE stmt;
Execution of the above EXECUTE statement results in issuing the error
ER_COLUMNACCESS_DENIED_ERROR since table_ref->is_merged_derived() is false
and check_column_grant_in_table_ref() called for a temporary table that
shouldn't be. To fix this issue the function find_field_in_tables has been
modified in such a way that the function check_column_grant_in_table_ref()
is not called for a temporary table.
This patch reverts the fixes of the bugs MDEV-24454 and MDEV-25631 from
the commit 3690c549c6.
It leaves the changes in plugin/feedback/feedback.cc and corresponding
test files introduced in this commit intact.
Proper fixes for the bug MDEV-24454 and MDEV-25631 will follow immediately.
Diagnostics_area::set_error_status (interrupted ALTER TABLE under LOCK)
Analysis: KILL_QUERY is not ignored when local memory used exceeds maximum
session memory. Hence the query proceeds, OK is sent and we end up
reopening tables that are marked for reopen. During this, kill status is
eventually checked and assertion failure happens during trying to send error
message because OK has already been sent.
Fix: Ok is already sent so statement has already executed. It is too
late to give error. So ignore kill.
Dead code cleanup:
part_info->num_parts usage was wrong and working incorrectly in
mysql_drop_partitions() because num_parts is already updated in
prep_alter_part_table(). We don't have to update part_info->partitions
because part_info is destroyed at alter_partition_lock_handling().
Cleanups:
- DBUG_EVALUATE_IF() macro replaced by shorter form DBUG_IF();
- Typo in ER_KEY_COLUMN_DOES_NOT_EXITS.
Refactorings:
- Splitted write_log_replace_delete_frm() into write_log_delete_frm()
and write_log_replace_frm();
- partition_info via DDL_LOG_STATE;
- set_part_info_exec_log_entry() removed.
DBUG_EVALUATE removed
DBUG_EVALUTATE was only added for consistency together with
DBUG_EVALUATE_IF. It is not used anywhere in the code.
DBUG_SUICIDE() fix on release build
On release DBUG_SUICIDE() was statement. It was wrong as
DBUG_SUICIDE() is used in expression context.
https://jira.mariadb.org/browse/MDEV-26221
my_sys DYNAMIC_ARRAY and DYNAMIC_STRING inconsistancy
The DYNAMIC_STRING uses size_t for sizes, but DYNAMIC_ARRAY used uint.
This patch adjusts DYNAMIC_ARRAY to use size_t like DYNAMIC_STRING.
As the MY_DIR member number_of_files is copied from a DYNAMIC_ARRAY,
this is changed to be size_t.
As MY_TMPDIR members 'cur' and 'max' are copied from a DYNAMIC_ARRAY,
these are also changed to be size_t.
The lists of plugins and stored procedures use DYNAMIC_ARRAY,
but their APIs assume a size of 'uint'; these are unchanged.
There are two fill_record() functions (lines 8343 and 8618). First one
is used when there are some explicit values, the second one is used
for all implicit values. First one does update_default_fields(), the
second one did not. Added update_default_fields() call to the implicit
version of fill_record().
Use in_sum_func (and so nest_level) only in LEX to which SELECT lex belong to
Reduce usage of current_select (because it does not always point on the correct
SELECT_LEX, for example with prepare.
Change context for all classes inherited from Item_ident (was only for Item_field) in case of pushing down it to HAVING.
Now name resolution context have to have SELECT_LEX reference if the context is present.
Fixed feedback plugin stack usage.
The problem was that a PREARE followed by a non prepared statement
using DEFAULT NEXT_VALUE() could change table->next_local to point to
a not persitent memory aria. The next EXECUTE would then try to use
the wrong pointer, which could cause a crash.
Fixed by reseting the pointer to it's old value when doing EXECUTE.
Analysis: When we have INSERT/REPLACE returning with qualified asterisk in the
RETURNING clause, '*' is not resolved properly because of wrong context.
context->table_list is NULL or has incorrect table because context->table_list
has tables from the FROM clause. For INSERT/REPLACE...SELECT...RETURNING,
context->table_list has table we are inserting from. While in other
INSERT/REPLACE syntax, context->table_list is NULL because there is no FROM
clause.
Fix: If filling fields instead of '*' for qualified asterisk in RETURNING,
use first_name_resolution_table for correct resolution of item.
The columns that are part of DEFAULT expression were not read-marked
in statements like UPDATE...SET b=DEFAULT.
The problem is `F(DEFAULT)` expression depends of the left-hand side of an
assignment. However, setup_fields accepts only right-hand side value.
Neither Item::fix_fields does.
Suchwise, b=DEFAULT(b) works fine, because Item_default_field has
information on what field it is default of:
if (thd->mark_used_columns != MARK_COLUMNS_NONE)
def_field->default_value->expr->update_used_tables();
in Item_default_value::fix_fields().
It is not reasonable to pass a left-hand side to Item:fix_fields, because
the case is rare, so the rewrite
b= F(DEFAULT) -> b= F(DEFAULT(b))
is made instead.
Both UPDATE and multi-UPDATE are affected, however any form of INSERT
is not: it marks all the fields in DEFAULT expressions for read in
TABLE::mark_default_fields_for_write().
This is a 10.2+ part of a jira task
The two bugs regarding virtual column marking have been fixed:
1. UPDATE of a partitioned table, where the optimizer has chosen a
secondary index to make a filesort;
2. INSERT into a table with a nonblob field generated from a blob, with
binlog enabled and binlog_row_image=noblob.
3. DELETE from a view on a table with virtual column.
Generally the assertion happens from update_virtual_fields() call
These bugs are root-caused by missing field marking for dependant fields
of a virtual column.
Therefore a fix is: mark all the fields involved in the vcol expression by
calling field->register_field_in_read_map() instead just setting a single
bit.
3 was reproducible only on 10.4+, however the problem might has just been
invisible in the earlier versions. The fix is applicable to 10.2-10.3 as
well.
do not try to detect metadata change (and reprepare) for
internal short-lived TABLE_LIST objects that couldn't have
possibly lived long enough to see prepare and cache the metadata.
