REMOVED OPTIONS / SYSTEM VARIABLES
* mysqld removed options will not stop the server from starting. They
will be silently accepted, as if --loose flag is set. Removed options
prefixes will not interfere with existing options prefixes. They are
consumed last.
* mysqld removed options will not show in --help.
* mysqld system variables will be removed according to the deprecation
& removal timeline and not function within the client interface once
removed.
DEPRECTATED OPTIONS / SYSTEM VARIABLES
* mysqld deprecated options will issue a warning to the user.
* mysqld deprecated options will still be visible in --help.
* mysqld system variables will be removed in the next GA version that is
past EOL of the version that deprecated the variable.
* deprecated options / variables will not be used anywhere in the server
code the moment they are deprecated. At most, they will act as aliases.
The advantage of this policy is that it ensures upgrades will always
allow the user to start the server, even when upgrading from a very old
version. It is still possible for user applications to break when
upgrading, as system variables set via the client interface will return
errors. However, this will happen after a long time, with lots of
warnings between versions. The expected timeline is ~ 5 years until a
deprecated variable dissapears from the server.
Variable `wsrep_new_cluster` should be set to false after `wsrep_init_startup`.
Problem was that this was done before when mysqldump is used as SST method so option
wsrep-new-cluster didn't have any effect.
Support for galera GTID consistency thru cluster. All nodes in cluster
should have same GTID for replicated events which are originating from cluster.
Cluster originating commands need to contain sequential WSREP GTID seqno
Ignore manual setting of gtid_seq_no=X.
In master-slave scenario where master is non galera node replicated GTID is
replicated and is preserved in all nodes.
To have this - domain_id, server_id and seqnos should be same on all nodes.
Node which bootstraps the cluster, to achieve this, sends domain_id and
server_id to other nodes and this combination is used to write GTID for events
that are replicated inside cluster.
Cluster nodes that are executing non replicated events are going to have different
GTID than replicated ones, difference will be visible in domain part of gtid.
With wsrep_gtid_domain_id you can set domain_id for WSREP cluster.
Functions WSREP_LAST_WRITTEN_GTID, WSREP_LAST_SEEN_GTID and
WSREP_SYNC_WAIT_UPTO_GTID now works with "native" GTID format.
Fixed galera tests to reflect this chances.
Add variable to manually update WSREP GTID seqno in cluster
Add variable to manipulate and change WSREP GTID seqno. Next command
originating from cluster and on same thread will have set seqno and
cluster should change their internal counter to it's value.
Behavior is same as using @@gtid_seq_no for non WSREP transaction.
Description:
============
To change 'CONSERVATIVE' @@global.slave_parallel_mode default to 'OPTIMISTIC'
in 10.5.
@sql/sys_vars.cc
Changed default parallel_mode to 'OPTIMISTIC'
@sql/rpl_filter.cc
Changed default parallel_mode to 'OPTIMISTIC'
@sql/mysqld.cc
Removed the initialization of 'SLAVE_PARALLEL_CONSERVATIVE' to
'opt_slave_parallel_mode' variable.
@mysql-test/suite/rpl/t/rpl_parallel_mdev6589.test
@mysql-test/suite/rpl/t/rpl_mdev6386.test
Added 'mtr' suppression to ignore 'ER_PRIOR_COMMIT_FAILED'. In case of
'OPTIMISTIC' mode if a transaction gets killed during "wait_for_prior_commit"
it results in above error "1964". Hence suppression needs to be added for this
error.
@mysql-test/suite/rpl/t/rpl_parallel_conflicts.test
Test has a 'slave.opt' which explicitly sets slave_parallel_mode to
'conservative'. When the test ends this mode conflicts with new default mode.
Hence check test case reports an error. The 'slave.opt' is removed and options
are set and reset within test.
@mysql-test/suite/multi_source/info_logs.result
@mysql-test/suite/multi_source/reset_slave.result
@mysql-test/suite/multi_source/simple.result
Result content mismatch in "show slave status" output. This is expected as new
slave_parallel_mode='OPTIMISTIC'.
@mysql-test/include/check-testcase.test
Updated default 'slave_parallel_mode' to 'optimistic'.
Refactored rpl_parallel.test into following test cases.
Test case 1: @mysql-test/suite/rpl/t/rpl_parallel_domain.test
Test case 2: @mysql-test/suite/rpl/t/rpl_parallel_domain_slave_single_grp.test
Test case 3: @mysql-test/suite/rpl/t/rpl_parallel_single_grpcmt.test
Test case 4: @mysql-test/suite/rpl/t/rpl_parallel_stop_slave.test
Test case 5: @mysql-test/suite/rpl/t/rpl_parallel_slave_bgc_kill.test
Test case 6: @mysql-test/suite/rpl/t/rpl_parallel_gco_wait_kill.test
Test case 7: @mysql-test/suite/rpl/t/rpl_parallel_free_deferred_event.test
Test case 8: @mysql-test/suite/rpl/t/rpl_parallel_missed_error_handling.test
Test case 9: @mysql-test/suite/rpl/t/rpl_parallel_innodb_lock_conflict.test
Test case 10: @mysql-test/suite/rpl/t/rpl_parallel_gtid_slave_pos_update_fail.test
Test case 11: @mysql-test/suite/rpl/t/rpl_parallel_wrong_exec_master_pos.test
Test case 12: @mysql-test/suite/rpl/t/rpl_parallel_partial_binlog_trans.test
Test case 13: @mysql-test/suite/rpl/t/rpl_parallel_ignore_error_on_rotate.test
Test case 14: @mysql-test/suite/rpl/t/rpl_parallel_wrong_binlog_order.test
Test case 15: @mysql-test/suite/rpl/t/rpl_parallel_incorrect_relay_pos.test
Test case 16: @mysql-test/suite/rpl/t/rpl_parallel_retry_deadlock.test
Test case 17: @mysql-test/suite/rpl/t/rpl_parallel_deadlock_corrupt_binlog.test
Test case 18: @mysql-test/suite/rpl/t/rpl_parallel_mode.test
Test case 19: @mysql-test/suite/rpl/t/rpl_parallel_analyze_table_hang.test
Test case 20: @mysql-test/suite/rpl/t/rpl_parallel_record_gtid_wakeup.test
Test case 21: @mysql-test/suite/rpl/t/rpl_parallel_stop_on_con_kill.test
Test case 22: @mysql-test/suite/rpl/t/rpl_parallel_rollback_assert.test
It is never called after 7fb9d64, which makes the whole refresh version
infrastructure useless.
Removed:
- tdc_version_t
- TDC_VERSION_MAX
- tdc_version
- TDC_element::version
- tdc_increment_refresh_version()
- tdc_refresh_version()
- refresh_version argument of tdc_wait_for_old_version()
- Flush_commands status variable
- refresh version from COM_STATISTICS
- refresh version from dbug printouts
Part of MDEV-17882 - Cleanup refresh version
This is a prerequisite patch required to remove Innodb's
thd_destructor_proxy thread.
The patch implement pre-shutdown functionality for handlers.
A storage engine might need to perform some work after all user
connections are shut down, but before killing off the plugins.
The reason is that an SE could still be using some of the
server infrastructure. In case of Innodb this would be purge threads,
that call into the server to calculate results of virtual function,
acquire MDL locks on tables, or possibly also use the audit plugins.
Proper C-style type erasure is done via void*, not via char* or something else.
free_key_cache()
free_rpl_filter(): types were fixed to avoid function pointer type cast which
is still undefined behavior.
Note, that casting from void* to any other pointer type is safe and correct.
make load_defaults() store the file name in the generated option list
using a special marker ---file-marker--- option.
Pick up this filename in handle_options().
Remove ---args-separator---, use ---file-marker--- with an empty file
name instead - this simplifies checks on the caller, only one special
option to recognize.
only my_getopt should use it, because it changes my_getopt's behavior.
If one simply wants to skip the separator - don't ask it to be added
in the first place
almost all my_getopt settings and callbacks are global variables,
directly assignable to configure my_getopt. Only getopt_get_addr
was using a setter function. Get rid of it, make it a global
directly assignable variable like all other settings.
Also make getopt_compare_strings() static.
For release builds, do not declare unused variables.
unpack_row(): Omit a debug-only variable from WSREP diagnostic message.
create_wsrep_THD(): Fix -Wmaybe-uninitialized for the PSI_thread_key.
Problem was that if user used bad wsrep configuration
we call unireg_abort and in wsrep case there is check
to wsrep_server_state that might not yet be initialized.
Fixed by checking that wsrep_server_state is initialized
before checking it's state.
Changes to be committed:
modified: sql/mysqld.cc
modified: sql/wsrep_server_state.h
Cherry-pick the commits the mysql and some changes.
WL#4618 RBR: extended table metadata in the binary log
This patch extends Table Map Event. It appends some new fields for
more metadata. The new metadata includes:
- Signedness of Numberic Columns
- Character Set of Character Columns and Binary Columns
- Column Name
- String Value of SET Columns
- String Value of ENUM Columns
- Primary Key
- Character Set of SET Columns and ENUM Columns
- Geometry Type
Some of them are optional, the patch introduces a GLOBAL system
variable to control it. It is binlog_row_metadata.
- Scope: GLOBAL
- Dynamic: Yes
- Type: ENUM
- Values: {NO_LOG, MINIMAL, FULL}
- Default: NO_LOG
Only Signedness, character set and geometry type are logged if it is MINIMAL.
Otherwise all of them are logged.
Also add a binlog_type_info() to field, So that we can have extract
relevant binlog info from field.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
Commit 536215e32f in MariaDB Server 10.3.1
introduced the compiler flag (not cmake option) DBUG_ASSERT_AS_PRINTF
that converts DBUG_ASSERT in non-debug builds into printouts.
For debug builds, it could be useful to be able to convert DBUG_ASSERT
into a warning or error printout, to allow execution to continue.
This would allow debug builds to be used for reproducing hard failures
that occur with release builds.
my_assert: A Boolean flag (set by default), tied to the new option
debug_assert that is available on debug builds only.
When set, DBUG_ASSERT() will invoke assert(), like it did until now.
When unset, DBUG_ASSERT() will invoke fprintf(stderr, ...)
with the file name, line number and assertion expression.
