SQL_SELECT::check_quick() returns error status only
test_quick_select() returns -1. Fix error handling when lower frames
throw error, but it is ignored by test_quick_select(). Fix return
status for out-of-memory errors which are obviously must be processed
as error in upper frames.
Assertion `old_part_id == m_last_part' failed in ha_partition::update_row or `part_id == m_last_part' in ha_partition::delete_row upon UPDATE/DELETE after dropping versioning
PRIMARY KEY change hadn't been treated as partition reorganization in case of partitioning by KEY() (without parameters).
* set `*partition_changed= true` in the described case.
* since add/drop system versioning does not affect alter_info->key_list, it required separate attention
* rename to a generic name
* move remaning initializations from query exec to prepare time
* simplify/unify key handling in open_table_from_share and delayed
* remove dead code
* move tests where they belong
- multi_range_read_info_const now uses the new records_in_range interface
- Added handler::avg_io_cost()
- Don't calculate avg_io_cost() in get_sweep_read_cost if avg_io_cost is
not 1.0. In this case we trust the avg_io_cost() from the handler.
- Changed test_quick_select to use TIME_FOR_COMPARE instead of
TIME_FOR_COMPARE_IDX to align this with the rest of the code.
- Fixed bug when using test_if_cheaper_ordering where we didn't use
keyread if index was changed
- Fixed a bug where we didn't use index only read when using order-by-index
- Added keyread_time() to HEAP.
The default keyread_time() was optimized for blocks and not suitable for
HEAP. The effect was the HEAP prefered table scans over ranges for btree
indexes.
- Fixed get_sweep_read_cost() for HEAP tables
- Ensure that range and ref have same cost for simple ranges
Added a small cost (MULTI_RANGE_READ_SETUP_COST) to ranges to ensure
we favior ref for range for simple queries.
- Fixed that matching_candidates_in_table() uses same number of records
as the rest of the optimizer
- Added avg_io_cost() to JT_EQ_REF cost. This helps calculate the cost for
HEAP and temporary tables better. A few tests changed because of this.
- heap::read_time() and heap::keyread_time() adjusted to not add +1.
This was to ensure that handler::keyread_time() doesn't give
higher cost for heap tables than for normal tables. One effect of
this is that heap and derived tables stored in heap will prefer
key access as this is now regarded as cheap.
- Changed cost for index read in sql_select.cc to match
multi_range_read_info_const(). All index cost calculation is now
done trough one function.
- 'ref' will now use quick_cost for keys if it exists. This is done
so that for '=' ranges, 'ref' is prefered over 'range'.
- scan_time() now takes avg_io_costs() into account
- get_delayed_table_estimates() uses block_size and avg_io_cost()
- Removed default argument to test_if_order_by_key(); simplifies code
MDEV-21606 Improve update handler (long unique keys on blobs)
MDEV-21470 MyISAM and Aria start_bulk_insert doesn't work with long unique
MDEV-21606 Bug fix for previous version of this code
MDEV-21819 2 Assertion `inited == NONE || update_handler != this'
- Move update_handler from TABLE to handler
- Move out initialization of update handler from ha_write_row() to
prepare_for_insert()
- Fixed that INSERT DELAYED works with update handler
- Give an error if using long unique with an autoincrement column
- Added handler function to check if table has long unique hash indexes
- Disable write cache in MyISAM and Aria when using update_handler as
if cache is used, the row will not be inserted until end of statement
and update_handler would not find conflicting rows.
- Removed not used handler argument from
check_duplicate_long_entries_update()
- Syntax cleanups
- Indentation fixes
- Don't use single character indentifiers for arguments
When there are E empty partitions left, auto-create N new empty
partitions for SYSTEM_TIME partitioning rotated by INTERVAL/LIMIT and
marked by AUTO_INCREMENT keyword. Syntax change: AUTO_INCREMENT
keyword (or shorter AUTO may be used instead) after LIMIT/INTERVAL
clause.
CREATE OR REPLACE TABLE t (x INT) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME LIMIT 100000 AUTO_INCREMENT;
CREATE OR REPLACE TABLE t (x INT) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 WEEK AUTO_INCREMENT;
The current revision implements hard-coded values of 1 for E and N. As
well as auto-creation threshold MinInterval = 1 hour, MinLimit = 1000.
The name for newly added partition will be first chosen as "pX", where
X is partition number and "p" is hard-coded name prefix. If this name
is already occupied, the X will be incremented until the resulting
name will be free to use.
ALTER TABLE ADD PARTITION is now always fast. If there some history
partition overflow occurs manual ALTER TABLE REBUILD PARTITION is
needed.
Race condition when innodb_lock_wait_timeout (default 50 seconds)
exceeds for 'send update', but information_schema.innodb_lock_waits
still sees this wait or it my exit by timeout. My occur on overloaded
host.
Cause:
* row_start != 0 treated as it exists. Probably, possible row permutations had not been taken in mind.
Solution:
* Checking both row_start and row_end is correct, so versioned() function is used
Cause:
* when autocommit=0 (or transaction is issued by user),
`ha_commit_trans` is called twice on ALTER TABLE, causing a duplicated
insert into `transaction_registry` (ER_DUP_ENTRY).
Solution:
* ALTER TABLE makes an implicit commit by a second call. We actually
need to make an insert only when it is a real commit. So is_real
variable is additionally checked.
Incorrect assertion of EXTRA_CACHE for
HA_EXTRA_PREPARE_FOR_UPDATE. The latter is related to read cache, but
must operate without it as a noop.
Related to Bug#55458 and MDEV-20441.
Unit prepare prematurely fixed field which must be fixed via
setup_conds() to correctly update table->covering_keys.
Call vers_setup_conds() directly instead, because actually everything
else is not needed.
Unit prepare prematurely fixed field which must be fixed via
setup_conds() to correctly update table->covering_keys.
Call vers_setup_conds() directly instead, because actually everything
else is not needed.
Wrong assertion condition. SYSTEM_TIME_ALL indicates that
vers_setup_conds() is done. In case FOR SYSTEM_TIME ALL is specified
in command the assertion passes but not checks anything.
Don't do skip_setup_conds() unless all errors are checked.
Fixes following errors:
ER_PERIOD_NOT_FOUND
ER_VERS_QUERY_IN_PARTITION
ER_VERS_ENGINE_UNSUPPORTED
ER_VERS_NOT_VERSIONED
Don't do skip_setup_conds() unless all errors are checked.
Fixes following errors:
ER_PERIOD_NOT_FOUND
ER_VERS_QUERY_IN_PARTITION
ER_VERS_ENGINE_UNSUPPORTED
ER_VERS_NOT_VERSIONED
LIMIT history partitions cannot be checked by existing algorithm of
check_misplaced_rows() because working history partition is
incremented each time another one is filled. The existing algorithm
gets record and tries to decide partition id for it by
get_partition_id(). For LIMIT history it will just get first
non-filled partition.
To fix such partitions it is required to do REBUILD instead of REPAIR.
When view is merged by DT_MERGE_FOR_INSERT it is then skipped from
processing and doesn't update WHERE clause with
vers_setup_conds(). Note that view itself cannot work in
vers_setup_conds() because it doesn't have row_start, row_end
fields. Thus it is required to descend down to material TABLE_LIST
through calls of mysql_derived_prepare() and run vers_setup_conds()
from there. Luckily, all views (views of views, views of views of
views, etc.) are linked in one list through next_global pointer, so we
can skip all views of views and get straight to non-view TABLE_LIST by
checking its merge_underlying_list property for zero value (it is
assigned by DT_MERGE_FOR_INSERT for merged derived tables).
We have to do that only for UPDATE and DELETE. Other DML commands
don't use WHERE clause.
MDEV-21146 Assertion `m_lock_type == 2' in handler::ha_drop_table upon LOAD DATA
LOAD DATA does not use WHERE and the above call of vers_setup_conds()
is not needed. unit->prepare() led to wrongly locked temporary table.
"write set" for replication finally got its correct place
(mark_columns_per_binlog_row_image()). When done generally in
mark_columns_needed_for_update() it affects optimization
algorithm. used_key_is_modified, query_plan.using_io_buffer are
wrongly set and that leads to wrong prepare_for_keyread() which limits
read_set.
Turn read cache off for update and multi-update for versioned
table. no_cache is reinited on each TABLE open because it is
applicable for specific algorithms.
As a side fix vers_insert_history_row() honors vers_write setting.
Aria with row_format=fixed uses IO_CACHE of type READ_CACHE for
sequential read in update loop. When history row is inserted inside
this loop the cache misses it and fails with error.
TODO:
Currently maria_extra() does not support SEQ_READ_APPEND. Probably it
might be possible to use this type of cache.
Implement syntax like:
create table t1 (x int) with system versioning partition by system_time;
which will create 1 history partition and 1 current partition.
Also it is possible to specify the number of history partitions:
create table t1 (x int) with system versioning partition by system_time partitions 5;
which will create 4 history partitions (and 1 current partition).
Tests:
partition.test cases are duplicated where it is appropriate for default partitions.
partition_rotation.test cases are replaced by default partitions where possible.
MDEV-18957 UPDATE with LIMIT clause is wrong for versioned partitioned tables
UPDATE, DELETE: replace linear search of current/historical records
with vers_setup_conds().
Additional DML cases in view.test
Add support of referential constraints directly in column defininions:
create table t1 (id1 int primary key);
create table t2 (id2 int references t1(id1));
Referenced field name can be omitted if equal to foreign field name:
create table t1 (id int primary key);
create table t2 (id int references t1);
Until 10.5 this syntax was understood by the parser but was silently
ignored.
In case of generated columns this syntax is disabled at parser level
by ER_PARSE_ERROR. Note that separate FOREIGN KEY clause for generated
columns is disabled at storage engine level.
* Explicit STARTS syntax
* SHOW CREATE
* Default STARTS rounding depending on INTERVAL type
* Warn when STARTS timestamp is later than query time
* Fix uninitialized Lex->create_last_non_select_table under
mysql_unpack_partition()
Default STARTS rounding depending on INTERVAL type
If STARTS clause is omitted, default one is assigned with value
derived from query timestamp. The rounding is done on STARTS value
depending on INTERVAL type:
SECOND: no rounding is done;
MINUTE: timestamp seconds is set to 0;
HOUR: timestamp seconds and minutes are set to 0;
DAY, WEEK, MONTH and YEAR: timestamp seconds, minutes and hours are
set to 0 (the date of rotation is kept as current date).
MDEV-16210 original case was wrongly allowed versioned DELETE from
referenced table where reference is by non-primary key. InnoDB UPDATE
has optimization for new rows not changing its clustered index
position. In this case InnoDB doesn't update all secondary indexes and
misses the one holding the referenced key. The fix was to disable this
optimization for versioned DELETE. In case of versioned DELETE we
forcely update all secondary indexes and therefore check them for
constraints.
But the above fix raised another problem with versioned DELETE on
foreign table side. In case when there was no corresponding record in
referenced table (illegal foreign reference can be done with "set
foreign_key_checks=off") there was spurious constraint check (because
versioned DELETE is actually UPDATE) and hence the operation failed
with constraint error.
MDEV-16210 tried to fix the above problem by checking foreign table
instead of referenced table and that at least was illegal.
Constraint check is done by row_ins_check_foreign_constraint() no
matter what kind of table is checked, referenced or foreign
(controlled by check_ref argument).
Referenced table is checked by row_upd_check_references_constraints().
Foreign table is checked by row_ins_check_foreign_constraints().
Current fix rolls back the wrong fix for the above problem and
disables referenced table check for DELETE on foreign side by
introducing `check_foreign` argument which when set to *false* skips
row_ins_check_foreign_constraints() call.
