Let us avoid EXTENDED in the CHECK TABLE after a defragmentation,
because it would occasionally report an orphan delete-marked record
in the index "third". That error does not seem to be reproducible
when using the regular OPTIMIZE TABLE.
Also, let us make the test --repeat safe by removing the defragmentation
related statistics after DROP TABLE.
The defragmentation feature was removed in later releases in
commit 7ca89af6f8 (MDEV-30545)
along with this test case.
Reason:
======
- InnoDB fails to load the instant alter table metadata from
clustered index while loading the table definition.
The reason is that InnoDB metadata blob has the column length
exceeds maximum fixed length column size.
Fix:
===
- InnoDB should treat the long fixed length column as variable
length fields that needs external storage while initializing
the field map for instant alter operation
- commit 85db534731 (MDEV-33400)
retains the instantness in the table definition after discard
tablespace. So there is no need to assign n_core_null_bytes
during instant table preparation unless they are not
initialized.
- During copy algorithm, InnoDB should use bulk insert operation
for row by row insert operation. By doing this, copy algorithm
can effectively build indexes. This optimization is disabled
for temporary table, versioning table and table which has
foreign key relation.
Introduced the variable innodb_alter_copy_bulk to allow
the bulk insert operation for copy alter operation
inside InnoDB. This is enabled by default
ha_innobase::extra(): HA_EXTRA_END_ALTER_COPY mode tries to apply
the buffered bulk insert operation, updates the non-persistent
table stats.
row_merge_bulk_t::write_to_index(): Update stat_n_rows after
applying the bulk insert operation
row_ins_clust_index_entry_low(): In case of copy algorithm,
switch to bulk insert operation.
copy_data_error_ignore(): Handles the error while copying
the data from source to target file.
- During XA PREPARE, InnoDB releases the non-exclusive locks.
But it fails to remove the non-exclusive table lock from the
transaction table locks. In the mean time, main thread evicts
the table from the LRU cache. While rollbacking the XA transaction,
InnoDB iterates through the table locks to check whether it
holds lock on any system tables and wrongly assumes the
evicted table as system table since the table id is 0
Fix:
===
During XA PREPARE, remove the table locks of the transaction while
releasing the non-exclusive locks.
Problem:
========
- innodb.temp_truncate_freed fails with ER_WRONG_ARGUMENTS and
states that another buffer pool resize is already in progress.
Test case has wait condition to ensure that buffer pool
resize is completed. There is a possibility that wait condition
check could get false impression that InnoDB buffer pool resize
completed due to previous buffer pool resize.
Fix:
===
Add more elaborate wait_condition to ensure the current buffer
pool resize completed.
buf_pool_t::resize(): Set the buffer pool resize status only
after setting previous buffer pool size to current buffer pool
size. This should help the test case to make reliable.
Trivial batch, using the handler statistics already collected for
the slow query log.
The reason for the changes in test cases was mainly to change to use
select TABLE_SCHEMA ... from information_schema.table_statistics instead
of 'show table_statistics' to avoid future changes to test results
if we add more columns to table_statistics.
- Column stat_value and sample_size in mysql.innodb_index_stats
table is declared as BIGINT UNSIGNED without any check constraint.
user manually updates the value of stat_value and sample_size
to zero. InnoDB aborts the server while reading the statistics
information because InnoDB expects at least one leaf
page to exist for the index.
- To fix this issue, InnoDB should interpret the value of
stat_n_leaf_pages, stat_index_size in innodb_index_stats
stat_clustered_index_size, stat_sum_of_other_index_sizes
in innodb_table_stats as valid one even though user
mentioned it as 0.
During read only mode, InnoDB doesn't allow checkpoint to happen.
So InnoDB should throw the warning when InnoDB tries to
force the checkpoint when innodb_read_only = 1 or
innodb_force_recovery = 6.
As part of commit 685d958e38 (MDEV-14425)
the parameter innodb_log_write_ahead_size was removed, because it was
thought that determining the physical block size would be a sufficient
replacement.
However, we can only determine the physical block size on Linux or
Microsoft Windows. On some file systems, the physical block size
is not relevant. For example, XFS uses a block size of 4096 bytes
even if the underlying block size may be smaller.
On Linux, we failed to determine the physical block size if
innodb_log_file_buffered=OFF was not requested or possible.
This will be fixed.
log_sys.write_size: The value of the reintroduced parameter
innodb_log_write_ahead_size. To keep it simple, this is read-only
and a power of two between 512 and 4096 bytes, so that the previous
alignment guarantees are fulfilled. This will replace the previous
log_sys.get_block_size().
log_sys.block_size, log_t::get_block_size(): Remove.
log_t::set_block_size(): Ensure that write_size will not be less
than the physical block size. There is no point to invoke this
function with 512 or less, because that is the minimum value of
write_size.
innodb_params_adjust(): Add some disabled code for adjusting
the minimum value and default value of innodb_log_write_ahead_size
to reflect the log_sys.write_size.
log_t::set_recovered(): Mark the recovery completed. This is the
place to adjust some things if we want to allow write_size>4096.
log_t::resize_write_buf(): Refer to write_size.
log_t::resize_start(): Refer to write_size instead of get_block_size().
log_write_buf(): Simplify some arithmetics and remove a goto.
log_t::write_buf(): Refer to write_size. If we are writing less than
that, do not switch buffers, but keep writing to the same buffer.
Move some code to improve the locality of reference.
recv_scan_log(): Refer to write_size instead of get_block_size().
os_file_create_func(): For type==OS_LOG_FILE on Linux, always invoke
os_file_log_maybe_unbuffered(), so that log_sys.set_block_size() will
be invoked even if we are not attempting to use O_DIRECT.
recv_sys_t::find_checkpoint(): Read the entire log header
in a single 12 KiB request into log_sys.buf.
Tested with:
./mtr --loose-innodb-log-write-ahead-size=4096
./mtr --loose-innodb-log-write-ahead-size=2048
innodb_doublewrite_update(): Disallow any change if srv_read_only_mode
holds, that is, the server was started with innodb_read_only=ON or
innodb_force_recovery=6.
This fixes up commit 1122ac978e (MDEV-33545).
- Few of test case should make sure that InnoDB does hit
the debug sync point during startup of the server.
InnoDB can remove the double quotes of debug point
in restart parameters.
The fixes in b8a6719889 have not disabled
semi-consistent read for innodb_snapshot_isolation=ON mode, they just allowed
read uncommitted version of a record, that's why the test for MDEV-26643 worked
well.
The semi-consistent read should be disabled on upper level in
row_search_mvcc() for READ COMMITTED isolation level.
Reviewed by Marko Mäkelä.
- InnoDB tries to write FILE_CHECKPOINT marker during
early recovery when log file size is insufficient.
While updating the log checkpoint at the end of the recovery,
InnoDB must already have written out all pending changes
to the persistent files. To complete the checkpoint, InnoDB
has to write some log records for the checkpoint and to
update the checkpoint header. If the server gets killed
before updating the checkpoint header then it would lead
the logfile to be unrecoverable.
- This patch avoids FILE_CHECKPOINT marker during early
recovery and narrows down the window of opportunity to
make the log file unrecoverable.
- The deadlock counter was moved from
Deadlock::find_cycle into Deadlock::report, because
the find_cycle method is called multiple times during deadlock
detection flow, which means it shouldn't have such side effects.
But report() can, which called only once for
a victim transaction.
- Also the deadlock_detect.test and *.result test case
has been extended to handle the fix.
number of non-user tablespace.
fil_space_t::try_to_close(): Don't try to close
the tablespace which is acquired by the caller of
the function
Added the suppression message in open_files_limit test case
number of non-user tablespace.
- InnoDB only closes the user tablespace when the number of open
files exceeds innodb_open_files limit. In that case, InnoDB should
make sure that innodb_open_files value should be greater
than number of undo tablespace, system and temporary tablespace files.
