Instead of pointlessly waiting for a page flush to occur, take
the matter into our own hands and request an explicit flush.
Also, test with the minimum necessary amount of data (0 or 1 rows)
so that both page encryption and decryption will be exercised.
The buffer pool refactoring in MDEV-15053 and MDEV-22871 shifted
the performance bottleneck to the page flushing.
The configuration parameters will be changed as follows:
innodb_lru_flush_size=32 (new: how many pages to flush on LRU eviction)
innodb_lru_scan_depth=1536 (old: 1024)
innodb_max_dirty_pages_pct=90 (old: 75)
innodb_max_dirty_pages_pct_lwm=75 (old: 0)
Note: The parameter innodb_lru_scan_depth will only affect LRU
eviction of buffer pool pages when a new page is being allocated. The
page cleaner thread will no longer evict any pages. It used to
guarantee that some pages will remain free in the buffer pool. Now, we
perform that eviction 'on demand' in buf_LRU_get_free_block().
The parameter innodb_lru_scan_depth(srv_LRU_scan_depth) is used as follows:
* When the buffer pool is being shrunk in buf_pool_t::withdraw_blocks()
* As a buf_pool.free limit in buf_LRU_list_batch() for terminating
the flushing that is initiated e.g., by buf_LRU_get_free_block()
The parameter also used to serve as an initial limit for unzip_LRU
eviction (evicting uncompressed page frames while retaining
ROW_FORMAT=COMPRESSED pages), but now we will use a hard-coded limit
of 100 or unlimited for invoking buf_LRU_scan_and_free_block().
The status variables will be changed as follows:
innodb_buffer_pool_pages_flushed: This includes also the count of
innodb_buffer_pool_pages_LRU_flushed and should work reliably,
updated one by one in buf_flush_page() to give more real-time
statistics. The function buf_flush_stats(), which we are removing,
was not called in every code path. For both counters, we will use
regular variables that are incremented in a critical section of
buf_pool.mutex. Note that show_innodb_vars() directly links to the
variables, and reads of the counters will *not* be protected by
buf_pool.mutex, so you cannot get a consistent snapshot of both variables.
The following INFORMATION_SCHEMA.INNODB_METRICS counters will be
removed, because the page cleaner no longer deals with writing or
evicting least recently used pages, and because the single-page writes
have been removed:
* buffer_LRU_batch_flush_avg_time_slot
* buffer_LRU_batch_flush_avg_time_thread
* buffer_LRU_batch_flush_avg_time_est
* buffer_LRU_batch_flush_avg_pass
* buffer_LRU_single_flush_scanned
* buffer_LRU_single_flush_num_scan
* buffer_LRU_single_flush_scanned_per_call
When moving to a single buffer pool instance in MDEV-15058, we missed
some opportunity to simplify the buf_flush_page_cleaner thread. It was
unnecessarily using a mutex and some complex data structures, even
though we always have a single page cleaner thread.
Furthermore, the buf_flush_page_cleaner thread had separate 'recovery'
and 'shutdown' modes where it was waiting to be triggered by some
other thread, adding unnecessary latency and potential for hangs in
relatively rarely executed startup or shutdown code.
The page cleaner was also running two kinds of batches in an
interleaved fashion: "LRU flush" (writing out some least recently used
pages and evicting them on write completion) and the normal batches
that aim to increase the MIN(oldest_modification) in the buffer pool,
to help the log checkpoint advance.
The buf_pool.flush_list flushing was being blocked by
buf_block_t::lock for no good reason. Furthermore, if the FIL_PAGE_LSN
of a page is ahead of log_sys.get_flushed_lsn(), that is, what has
been persistently written to the redo log, we would trigger a log
flush and then resume the page flushing. This would unnecessarily
limit the performance of the page cleaner thread and trigger the
infamous messages "InnoDB: page_cleaner: 1000ms intended loop took 4450ms.
The settings might not be optimal" that were suppressed in
commit d1ab89037a unless log_warnings>2.
Our revised algorithm will make log_sys.get_flushed_lsn() advance at
the start of buf_flush_lists(), and then execute a 'best effort' to
write out all pages. The flush batches will skip pages that were modified
since the log was written, or are are currently exclusively locked.
The MDEV-13670 message "page_cleaner: 1000ms intended loop took" message
will be removed, because by design, the buf_flush_page_cleaner() should
not be blocked during a batch for extended periods of time.
We will remove the single-page flushing altogether. Related to this,
the debug parameter innodb_doublewrite_batch_size will be removed,
because all of the doublewrite buffer will be used for flushing
batches. If a page needs to be evicted from the buffer pool and all
100 least recently used pages in the buffer pool have unflushed
changes, buf_LRU_get_free_block() will execute buf_flush_lists() to
write out and evict innodb_lru_flush_size pages. At most one thread
will execute buf_flush_lists() in buf_LRU_get_free_block(); other
threads will wait for that LRU flushing batch to finish.
To improve concurrency, we will replace the InnoDB ib_mutex_t and
os_event_t native mutexes and condition variables in this area of code.
Most notably, this means that the buffer pool mutex (buf_pool.mutex)
is no longer instrumented via any InnoDB interfaces. It will continue
to be instrumented via PERFORMANCE_SCHEMA.
For now, both buf_pool.flush_list_mutex and buf_pool.mutex will be
declared with MY_MUTEX_INIT_FAST (PTHREAD_MUTEX_ADAPTIVE_NP). The critical
sections of buf_pool.flush_list_mutex should be shorter than those for
buf_pool.mutex, because in the worst case, they cover a linear scan of
buf_pool.flush_list, while the worst case of a critical section of
buf_pool.mutex covers a linear scan of the potentially much longer
buf_pool.LRU list.
mysql_mutex_is_owner(), safe_mutex_is_owner(): New predicate, usable
with SAFE_MUTEX. Some InnoDB debug assertions need this predicate
instead of mysql_mutex_assert_owner() or mysql_mutex_assert_not_owner().
buf_pool_t::n_flush_LRU, buf_pool_t::n_flush_list:
Replaces buf_pool_t::init_flush[] and buf_pool_t::n_flush[].
The number of active flush operations.
buf_pool_t::mutex, buf_pool_t::flush_list_mutex: Use mysql_mutex_t
instead of ib_mutex_t, to have native mutexes with PERFORMANCE_SCHEMA
and SAFE_MUTEX instrumentation.
buf_pool_t::done_flush_LRU: Condition variable for !n_flush_LRU.
buf_pool_t::done_flush_list: Condition variable for !n_flush_list.
buf_pool_t::do_flush_list: Condition variable to wake up the
buf_flush_page_cleaner when a log checkpoint needs to be written
or the server is being shut down. Replaces buf_flush_event.
We will keep using timed waits (the page cleaner thread will wake
_at least_ once per second), because the calculations for
innodb_adaptive_flushing depend on fixed time intervals.
buf_dblwr: Allocate statically, and move all code to member functions.
Use a native mutex and condition variable. Remove code to deal with
single-page flushing.
buf_dblwr_check_block(): Make the check debug-only. We were spending
a significant amount of execution time in page_simple_validate_new().
flush_counters_t::unzip_LRU_evicted: Remove.
IORequest: Make more members const. FIXME: m_fil_node should be removed.
buf_flush_sync_lsn: Protect by std::atomic, not page_cleaner.mutex
(which we are removing).
page_cleaner_slot_t, page_cleaner_t: Remove many redundant members.
pc_request_flush_slot(): Replaces pc_request() and pc_flush_slot().
recv_writer_thread: Remove. Recovery works just fine without it, if we
simply invoke buf_flush_sync() at the end of each batch in
recv_sys_t::apply().
recv_recovery_from_checkpoint_finish(): Remove. We can simply call
recv_sys.debug_free() directly.
srv_started_redo: Replaces srv_start_state.
SRV_SHUTDOWN_FLUSH_PHASE: Remove. logs_empty_and_mark_files_at_shutdown()
can communicate with the normal page cleaner loop via the new function
flush_buffer_pool().
buf_flush_remove(): Assert that the calling thread is holding
buf_pool.flush_list_mutex. This removes unnecessary mutex operations
from buf_flush_remove_pages() and buf_flush_dirty_pages(),
which replace buf_LRU_flush_or_remove_pages().
buf_flush_lists(): Renamed from buf_flush_batch(), with simplified
interface. Return the number of flushed pages. Clarified comments and
renamed min_n to max_n. Identify LRU batch by lsn=0. Merge all the functions
buf_flush_start(), buf_flush_batch(), buf_flush_end() directly to this
function, which was their only caller, and remove 2 unnecessary
buf_pool.mutex release/re-acquisition that we used to perform around
the buf_flush_batch() call. At the start, if not all log has been
durably written, wait for a background task to do it, or start a new
task to do it. This allows the log write to run concurrently with our
page flushing batch. Any pages that were skipped due to too recent
FIL_PAGE_LSN or due to them being latched by a writer should be flushed
during the next batch, unless there are further modifications to those
pages. It is possible that a page that we must flush due to small
oldest_modification also carries a recent FIL_PAGE_LSN or is being
constantly modified. In the worst case, all writers would then end up
waiting in log_free_check() to allow the flushing and the checkpoint
to complete.
buf_do_flush_list_batch(): Clarify comments, and rename min_n to max_n.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_flush_space(): Auxiliary function to look up a tablespace for
page flushing.
buf_flush_page(): Defer the computation of space->full_crc32(). Never
call log_write_up_to(), but instead skip persistent pages whose latest
modification (FIL_PAGE_LSN) is newer than the redo log. Also skip
pages on which we cannot acquire a shared latch without waiting.
buf_flush_try_neighbors(): Do not bother checking buf_fix_count
because buf_flush_page() will no longer wait for the page latch.
Take the tablespace as a parameter, and only execute this function
when innodb_flush_neighbors>0. Avoid repeated calls of page_id_t::fold().
buf_flush_relocate_on_flush_list(): Declare as cold, and push down
a condition from the callers.
buf_flush_check_neighbor(): Take id.fold() as a parameter.
buf_flush_sync(): Ensure that the buf_pool.flush_list is empty,
because the flushing batch will skip pages whose modifications have
not yet been written to the log or were latched for modification.
buf_free_from_unzip_LRU_list_batch(): Remove redundant local variables.
buf_flush_LRU_list_batch(): Let the caller buf_do_LRU_batch() initialize
the counters, and report n->evicted.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_do_LRU_batch(): Return the number of pages flushed.
buf_LRU_free_page(): Only release and re-acquire buf_pool.mutex if
adaptive hash index entries are pointing to the block.
buf_LRU_get_free_block(): Do not wake up the page cleaner, because it
will no longer perform any useful work for us, and we do not want it
to compete for I/O while buf_flush_lists(innodb_lru_flush_size, 0)
writes out and evicts at most innodb_lru_flush_size pages. (The
function buf_do_LRU_batch() may complete after writing fewer pages if
more than innodb_lru_scan_depth pages end up in buf_pool.free list.)
Eliminate some mutex release-acquire cycles, and wait for the LRU
flush batch to complete before rescanning.
buf_LRU_check_size_of_non_data_objects(): Simplify the code.
buf_page_write_complete(): Remove the parameter evict, and always
evict pages that were part of an LRU flush.
buf_page_create(): Take a pre-allocated page as a parameter.
buf_pool_t::free_block(): Free a pre-allocated block.
recv_sys_t::recover_low(), recv_sys_t::apply(): Preallocate the block
while not holding recv_sys.mutex. During page allocation, we may
initiate a page flush, which in turn may initiate a log flush, which
would require acquiring log_sys.mutex, which should always be acquired
before recv_sys.mutex in order to avoid deadlocks. Therefore, we must
not be holding recv_sys.mutex while allocating a buffer pool block.
BtrBulk::logFreeCheck(): Skip a redundant condition.
row_undo_step(): Do not invoke srv_inc_activity_count() for every row
that is being rolled back. It should suffice to invoke the function in
trx_flush_log_if_needed() during trx_t::commit_in_memory() when the
rollback completes.
sync_check_enable(): Remove. We will enable innodb_sync_debug from the
very beginning.
Reviewed by: Vladislav Vaintroub
The test that was added in commit e05650e686
would break a subsequent run of a test encryption.innodb-bad-key-change
because some pages in the system tablespace would be encrypted with
a different key.
The failure was repeatable with the following invocation:
./mtr --no-reorder \
encryption.create_or_replace,cbc \
encryption.innodb-bad-key-change,cbc
Because the crash was unrelated to the code changes that we reverted
in commit eb38b1f703
we can safely re-apply those fixes.
Let us shrink the test encryption.create_or_replace so that it can
run on the CI system, also on the embedded server.
encryption.create_or_replace_big: Renamed from the original test,
with the subset of encryption.create_or_replace omitted.
Shutdown of mtr tests may be too impatient, esp on CI environment where
10 seconds of `arg` of `shutdown_server arg` may not be enough for the clean
shutdown to complete.
This is fixed to remove explicit non-zero timeout argument to
`shutdown_server` from all mtr tests. mysqltest computes 60 seconds default
value for the timeout for the argless `shutdown_server` command.
This policy is additionally ensured with a compile time assert.
fil_space_t::freed_ranges: Store ranges of freed page numbers.
fil_space_t::last_freed_lsn: Store the most recent LSN of
freeing a page.
fil_space_t::freed_mutex: Protects freed_ranges, last_freed_lsn.
fil_space_create(): Initialize the freed_range mutex.
fil_space_free_low(): Frees the freed_range mutex.
range_set: Ranges of page numbers.
buf_page_create(): Removes the page from freed_ranges when page
is being reused.
btr_free_root(): Remove the PAGE_INDEX_ID invalidation. Because
btr_free_root() and dict_drop_index_tree() are executed in
the same atomic mini-transaction, there is no need to
invalidate the root page.
buf_release_freed_page(): Split from buf_flush_freed_page().
Skip any I/O
buf_flush_freed_pages(): Get the freed ranges from tablespace and
Write punch-hole or zeroes of the freed ranges.
buf_flush_try_neighbors(): Handles the flushing of freed ranges.
mtr_t::freed_pages: Variable to store the list of freed pages.
mtr_t::add_freed_pages(): To add freed pages.
mtr_t::clear_freed_pages(): To clear the freed pages.
mtr_t::m_freed_in_system_tablespace: Variable to indicate whether page has
been freed in system tablespace.
mtr_t::m_trim_pages: Variable to indicate whether the space has been trimmed.
mtr_t::commit(): Add the freed page and update the last freed lsn
in the tablespace and clear the tablespace freed range if space is
trimmed.
file_name_t::freed_pages: Store the freed pages during recovery.
file_name_t::add_freed_page(), file_name_t::remove_freed_page(): To
add and remove freed page during recovery.
store_freed_or_init_rec(): Store or remove the freed pages while
encountering FREE_PAGE or INIT_PAGE redo log record.
recv_init_crash_recovery_spaces(): Add the freed page encountered
during recovery to respective tablespace.
User-visible changes: The INFORMATION_SCHEMA views INNODB_BUFFER_PAGE
and INNODB_BUFFER_PAGE_LRU will report a dummy value FLUSH_TYPE=0
and will no longer report the PAGE_STATE value READY_FOR_USE.
We will remove some fields from buf_page_t and move much code to
member functions of buf_pool_t and buf_page_t, so that the access
rules of data members can be enforced consistently.
Evicting or adding pages in buf_pool.LRU will remain covered by
buf_pool.mutex.
Evicting or adding pages in buf_pool.page_hash will remain
covered by both buf_pool.mutex and the buf_pool.page_hash X-latch.
After this fix, buf_pool.page_hash lookups can entirely
avoid acquiring buf_pool.mutex, only relying on
buf_pool.hash_lock_get() S-latch.
Similarly, buf_flush_check_neighbors() can will rely solely on
buf_pool.mutex, no buf_pool.page_hash latch at all.
The buf_pool.mutex is rather contended in I/O heavy benchmarks,
especially when the workload does not fit in the buffer pool.
The first attempt to alleviate the contention was the
buf_pool_t::mutex split in
commit 4ed7082eef
which introduced buf_block_t::mutex, which we are now removing.
Later, multiple instances of buf_pool_t were introduced
in commit c18084f71b
and recently removed by us in
commit 1a6f708ec5 (MDEV-15058).
UNIV_BUF_DEBUG: Remove. This option to enable some buffer pool
related debugging in otherwise non-debug builds has not been used
for years. Instead, we have been using UNIV_DEBUG, which is enabled
in CMAKE_BUILD_TYPE=Debug.
buf_block_t::mutex, buf_pool_t::zip_mutex: Remove. We can mainly rely on
std::atomic and the buf_pool.page_hash latches, and in some cases
depend on buf_pool.mutex or buf_pool.flush_list_mutex just like before.
We must always release buf_block_t::lock before invoking
unfix() or io_unfix(), to prevent a glitch where a block that was
added to the buf_pool.free list would apper X-latched. See
commit c5883debd6 how this glitch
was finally caught in a debug environment.
We move some buf_pool_t::page_hash specific code from the
ha and hash modules to buf_pool, for improved readability.
buf_pool_t::close(): Assert that all blocks are clean, except
on aborted startup or crash-like shutdown.
buf_pool_t::validate(): No longer attempt to validate
n_flush[] against the number of BUF_IO_WRITE fixed blocks,
because buf_page_t::flush_type no longer exists.
buf_pool_t::watch_set(): Replaces buf_pool_watch_set().
Reduce mutex contention by separating the buf_pool.watch[]
allocation and the insert into buf_pool.page_hash.
buf_pool_t::page_hash_lock<bool exclusive>(): Acquire a
buf_pool.page_hash latch.
Replaces and extends buf_page_hash_lock_s_confirm()
and buf_page_hash_lock_x_confirm().
buf_pool_t::READ_AHEAD_PAGES: Renamed from BUF_READ_AHEAD_PAGES.
buf_pool_t::curr_size, old_size, read_ahead_area, n_pend_reads:
Use Atomic_counter.
buf_pool_t::running_out(): Replaces buf_LRU_buf_pool_running_out().
buf_pool_t::LRU_remove(): Remove a block from the LRU list
and return its predecessor. Incorporates buf_LRU_adjust_hp(),
which was removed.
buf_page_get_gen(): Remove a redundant call of fsp_is_system_temporary(),
for mode == BUF_GET_IF_IN_POOL_OR_WATCH, which is only used by
BTR_DELETE_OP (purge), which is never invoked on temporary tables.
buf_free_from_unzip_LRU_list_batch(): Avoid redundant assignments.
buf_LRU_free_from_unzip_LRU_list(): Simplify the loop condition.
buf_LRU_free_page(): Clarify the function comment.
buf_flush_check_neighbor(), buf_flush_check_neighbors():
Rewrite the construction of the page hash range. We will hold
the buf_pool.mutex for up to buf_pool.read_ahead_area (at most 64)
consecutive lookups of buf_pool.page_hash.
buf_flush_page_and_try_neighbors(): Remove.
Merge to its only callers, and remove redundant operations in
buf_flush_LRU_list_batch().
buf_read_ahead_random(), buf_read_ahead_linear(): Rewrite.
Do not acquire buf_pool.mutex, and iterate directly with page_id_t.
ut_2_power_up(): Remove. my_round_up_to_next_power() is inlined
and avoids any loops.
fil_page_get_prev(), fil_page_get_next(), fil_addr_is_null(): Remove.
buf_flush_page(): Add a fil_space_t* parameter. Minimize the
buf_pool.mutex hold time. buf_pool.n_flush[] is no longer updated
atomically with the io_fix, and we will protect most buf_block_t
fields with buf_block_t::lock. The function
buf_flush_write_block_low() is removed and merged here.
buf_page_init_for_read(): Use static linkage. Initialize the newly
allocated block and acquire the exclusive buf_block_t::lock while not
holding any mutex.
IORequest::IORequest(): Remove the body. We only need to invoke
set_punch_hole() in buf_flush_page() and nowhere else.
buf_page_t::flush_type: Remove. Replaced by IORequest::flush_type.
This field is only used during a fil_io() call.
That function already takes IORequest as a parameter, so we had
better introduce for the rarely changing field.
buf_block_t::init(): Replaces buf_page_init().
buf_page_t::init(): Replaces buf_page_init_low().
buf_block_t::initialise(): Initialise many fields, but
keep the buf_page_t::state(). Both buf_pool_t::validate() and
buf_page_optimistic_get() requires that buf_page_t::in_file()
be protected atomically with buf_page_t::in_page_hash
and buf_page_t::in_LRU_list.
buf_page_optimistic_get(): Now that buf_block_t::mutex
no longer exists, we must check buf_page_t::io_fix()
after acquiring the buf_pool.page_hash lock, to detect
whether buf_page_init_for_read() has been initiated.
We will also check the io_fix() before acquiring hash_lock
in order to avoid unnecessary computation.
The field buf_block_t::modify_clock (protected by buf_block_t::lock)
allows buf_page_optimistic_get() to validate the block.
buf_page_t::real_size: Remove. It was only used while flushing
pages of page_compressed tables.
buf_page_encrypt(): Add an output parameter that allows us ot eliminate
buf_page_t::real_size. Replace a condition with debug assertion.
buf_page_should_punch_hole(): Remove.
buf_dblwr_t::add_to_batch(): Replaces buf_dblwr_add_to_batch().
Add the parameter size (to replace buf_page_t::real_size).
buf_dblwr_t::write_single_page(): Replaces buf_dblwr_write_single_page().
Add the parameter size (to replace buf_page_t::real_size).
fil_system_t::detach(): Replaces fil_space_detach().
Ensure that fil_validate() will not be violated even if
fil_system.mutex is released and reacquired.
fil_node_t::complete_io(): Renamed from fil_node_complete_io().
fil_node_t::close_to_free(): Replaces fil_node_close_to_free().
Avoid invoking fil_node_t::close() because fil_system.n_open
has already been decremented in fil_space_t::detach().
BUF_BLOCK_READY_FOR_USE: Remove. Directly use BUF_BLOCK_MEMORY.
BUF_BLOCK_ZIP_DIRTY: Remove. Directly use BUF_BLOCK_ZIP_PAGE,
and distinguish dirty pages by buf_page_t::oldest_modification().
BUF_BLOCK_POOL_WATCH: Remove. Use BUF_BLOCK_NOT_USED instead.
This state was only being used for buf_page_t that are in
buf_pool.watch.
buf_pool_t::watch[]: Remove pointer indirection.
buf_page_t::in_flush_list: Remove. It was set if and only if
buf_page_t::oldest_modification() is nonzero.
buf_page_decrypt_after_read(), buf_corrupt_page_release(),
buf_page_check_corrupt(): Change the const fil_space_t* parameter
to const fil_node_t& so that we can report the correct file name.
buf_page_monitor(): Declare as an ATTRIBUTE_COLD global function.
buf_page_io_complete(): Split to buf_page_read_complete() and
buf_page_write_complete().
buf_dblwr_t::in_use: Remove.
buf_dblwr_t::buf_block_array: Add IORequest::flush_t.
buf_dblwr_sync_datafiles(): Remove. It was a useless wrapper of
os_aio_wait_until_no_pending_writes().
buf_flush_write_complete(): Declare static, not global.
Add the parameter IORequest::flush_t.
buf_flush_freed_page(): Simplify the code.
recv_sys_t::flush_lru: Renamed from flush_type and changed to bool.
fil_read(), fil_write(): Replaced with direct use of fil_io().
fil_buffering_disabled(): Remove. Check srv_file_flush_method directly.
fil_mutex_enter_and_prepare_for_io(): Return the resolved
fil_space_t* to avoid a duplicated lookup in the caller.
fil_report_invalid_page_access(): Clean up the parameters.
fil_io(): Return fil_io_t, which comprises fil_node_t and error code.
Always invoke fil_space_t::acquire_for_io() and let either the
sync=true caller or fil_aio_callback() invoke
fil_space_t::release_for_io().
fil_aio_callback(): Rewrite to replace buf_page_io_complete().
fil_check_pending_operations(): Remove a parameter, and remove some
redundant lookups.
fil_node_close_to_free(): Wait for n_pending==0. Because we no longer
do an extra lookup of the tablespace between fil_io() and the
completion of the operation, we must give fil_node_t::complete_io() a
chance to decrement the counter.
fil_close_tablespace(): Remove unused parameter trx, and document
that this is only invoked during the error handling of IMPORT TABLESPACE.
row_import_discard_changes(): Merged with the only caller,
row_import_cleanup(). Do not lock up the data dictionary while
invoking fil_close_tablespace().
logs_empty_and_mark_files_at_shutdown(): Do not invoke
fil_close_all_files(), to avoid a !needs_flush assertion failure
on fil_node_t::close().
innodb_shutdown(): Invoke os_aio_free() before fil_close_all_files().
fil_close_all_files(): Invoke fil_flush_file_spaces()
to ensure proper durability.
thread_pool::unbind(): Fix a crash that would occur on Windows
after srv_thread_pool->disable_aio() and os_file_close().
This fix was submitted by Vladislav Vaintroub.
Thanks to Matthias Leich and Axel Schwenke for extensive testing,
Vladislav Vaintroub for helpful comments, and Eugene Kosov for a review.
The issue here is that end_of_file for encrypted temporary IO_CACHE (used by filesort) is updated
using lseek.
Encryption adds storage overhead and hides it from the caller by recalculating offsets and lengths.
Two different IO_CACHE cannot possibly modify the same file
because the encryption key is randomly generated and stored in the IO_CACHE.
So when the tempfiles are encrypted DO NOT use lseek to change end_of_file.
Further observations about updating end_of_file using lseek
1) The end_of_file update is only used for binlog index files
2) The whole point is to update file length when the file was modified via a different file descriptor.
3) The temporary IO_CACHE files can never be modified via a different file descriptor.
4) For encrypted temporary IO_CACHE, end_of_file should not be updated with lseek
The configuration parameter innodb_scrub_log never really worked, as
reported in MDEV-13019 and MDEV-18370.
Because MDEV-14425 is changing the redo log format, the innodb_scrub_log
feature would have to be adjusted for it. Due to the known problems,
it is easier to remove the feature for now, and to ignore and deprecate
the parameters.
If old log contents should be kept secret, then enabling innodb_encrypt_log
or setting a smaller innodb_log_file_size could help.
Now there can be only one log file instead of several which
logically work as a single file.
Possible names of redo log files: ib_logfile0,
ib_logfile101 (for just created one)
innodb_log_fiels_in_group: value of this variable is not used
by InnoDB. Possible values are still 1..100, to not break upgrade
LOG_FILE_NAME: add constant of value "ib_logfile0"
LOG_FILE_NAME_PREFIX: add constant of value "ib_logfile"
get_log_file_path(): convenience function that returns full
path of a redo log file
SRV_N_LOG_FILES_MAX: removed
srv_n_log_files: we can't remove this for compatibility reasons,
but now server doesn't use this variable
log_sys_t::file::fd: now just one, not std::vector
log_sys_t::log_capacity: removed word 'group'
find_and_check_log_file(): part of logic from huge srv_start()
moved here
recv_sys_t::files: file descriptors of redo log files.
There can be several of those in case we're upgrading
from older MariaDB version.
recv_sys_t::remove_extra_log_files: whether to remove
ib_logfile{1,2,3...} after successfull upgrade.
recv_sys_t::read(): open if needed and read from one
of several log files
recv_sys_t::files_size(): open if needed and return files count
redo_file_sizes_are_correct(): check that redo log files
sizes are equal. Just to log an error for a user.
Corresponding check was moved from srv0start.cc
namespace deprecated: put all deprecated variables here to
prevent usage of it by us, developers
The test encryption.innodb-redo-badkey will by design cause access
to pages that appear corrupted (due to incorrect encryption key).
Let us disable the page dumps by requiring the test to be run on
a debug server. Page dumps on debug builds were already disabled
in MDEV-19766.
Historically, InnoDB split the redo log into at least 2 files.
MDEV-12061 allowed the minimum to be innodb_log_files_in_group=1,
but it kept the default at innodb_log_files_in_group=2.
Because performance seems to be slightly better with only one log file,
and because implementing an append-only variant of the log would require
a single file, let us define the default to be 1, and have
innodb_log_file_size=96M, to retain the same default total size.
In commit 0f7732d1d1
we introduced a innodb_checksum_algorithm=full_crc32 combination
to a number of encryption tests, and also fixed the code accordingly.
The default in MariaDB 10.5 is innodb_checksum_algorithm=full_crc32.
In a test merge to 10.5, the test encryption.innodb-redo-badkey failed
once due to a message that had been added in that commit.
Let us introduce a full_crc32 option to that test.
And let us use strict_crc32 and strict_full_crc32 instead of the
non-strict variants, for the previously augmented tests, to be in
line with the earlier tests encryption.corrupted_during_recovery and
encryption.innodb_encrypt_temporary_tables.
When MDEV-12026 introduced innodb_checksum_algorithm=full_crc32 in
MariaDB 10.4, it accidentally added a dependency on buf_page_t::encrypted.
Now that the flag has been removed, we must adjust the page-read routine.
buf_page_io_complete(): When the full_crc32 page checksum matches but the
tablespace ID in the page does not match after decrypting, we should
declare it a decryption failure and suppress the page dump output and
any attempts to re-read the page.
The test encryption.innodb-redo-badkey was accidentally disabled
until commit 23657a2101 enabled
it recently. Once it was enabled, it started failing randomly.
recv_recover_corrupt_page(): Do not assume that any redo log exists
for the page. A page may be unnecessarily read by read-ahead.
When noting the corruption, reset recv_addr->state to RECV_PROCESSED,
so that even if the same page is re-read again, we will only
decrement recv_sys->n_addrs once.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
The MDEV-20265 commit e746f451d5
introduces DBUG_ASSERT(right_op == r_tbl) in
st_select_lex::add_cross_joined_table(), and that assertion would
fail in several tests that exercise joins. That commit was skipped
in this merge, and a separate fix of MDEV-20265 will be necessary in 10.4.
========
During ibd file creation, InnoDB flushes the page0 without crypt
information. During recovery, InnoDB encounters encrypted page read
before initialising the crypt data of the tablespace. So it leads t
corruption of page and doesn't allow innodb to start.
Solution:
=========
Write crypt_data information in page0 while creating .ibd file creation.
During recovery, crypt_data will be initialised while processing
MLOG_FILE_NAME redo log record.
Problem:
========
Checksum for the encrypted temporary tablespace is not stored in the page
for full crc32 format.
Solution:
========
Made temporary tablespace in full crc32 format irrespective of encryption
parameter.
buf_tmp_page_encrypt(), buf_tmp_page_decrypt() - Both follows full_crc32
format.
