This merges the patch series that fixes a lot of missing validation
checks for read_log_event(). The merge includes a few added fixes that
are needed in new code introduced in 12.3.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This SQL script failed:
SET NAMES latin1 COLLATE latin1_swedish_ci;
CREATE OR REPLACE VIEW v1 AS SELECT 'Y' AS c1;
SET NAMES big5 COLLATE big5_chinese_ci;
SELECT * FROM v1 WHERE c1='y';
with the following error:
ERROR 1267 (HY000): Illegal mix of collations
(latin1_swedish_ci,COERCIBLE) and (big5_chinese_ci,COERCIBLE)
for operation '='
Note, latin1_swedish_ci and big5_chinese_ci are used here as examples.
The error also happened with different collation combinations.
Fix main idea:
If two collations have equal comparison rules (known as "tailoring")
on a given character repertoire,
like latin1_swedish_ci and big5_chinese_ci on ASCII letters,
then the "Illegal mix of collations" error can be avoided in
a comparison operator. We can choose any of the sides as the operation
effective collation - the result will be equal.
This optimization is not applied when at least one side has an explicit
COLLATE clause. Two explicit COLLATE clauses in one comparison are
already illegal when the character sets are the same, so for
consistency this stays illegal when the character sets differ too.
Most important details:
- Splitting enum_repertoire_t into smaller subsets,
for better repertoire granularity.
A variable holding a repertoire value can now have multiple
MY_REPERTOIRE_XXX flags set.
This patch implements detecting tailoring equality
on these repertoires:
* MY_REPERTOIRE_ASCII_DIGITS - [0..9]
* MY_REPERTOIRE_ASCII_MINUS_DOT_DIGITS - [-.0..9], e.g. '-10.5'.
It consists of the new bits MY_REPERTOIRE_ASCII_MINUS and
MY_REPERTOIRE_ASCII_DOT. They were a part of
MY_REPERTOIRE_ASCII_NOT_IDENT before. As a result, the numeric values
of MY_REPERTOIRE_ASCII and MY_REPERTOIRE_UNICODE30 changed
(223 and 255).
* MY_REPERTOIRE_ASCII_ALNUM - [A..Z,a..z,0..9].
* MY_REPERTOIRE_ASCII_IDENT - ALNUM + underscore
* MY_REPERTOIRE_ASCII - the entire range U+0000..U+007F
- Adding a new virtual function "tailoring" in my_collation_handler_st.
It returns the tailoring on the given repertoire for the given
collation.
If cs1->coll->tailoring(cs1, some_repertoire) returns {0,0},
it means the illegal mix optimization cannot be used
for this collation on the given repertoire.
If these calls:
tr1= cs1->coll->tailoring(cs1, some_repertoire);
tr2= cs2->coll->tailoring(cs2, some_repertoire);
return both non-NULL results and tr1.str==tr2.str,
then these collations are equal on the given repertoire
and are mutually replaceable for a comparison operator,
so "Illegal mix of collations" can be avoided.
- Tailoring strings are shared constants my_tailoring_str_*
(strings/strings_def.h). Tailorings are compared by the string
pointer, so tailoring() implementations return strings only from
these constants. The strings do not depend on PAD/NOPAD.
- my_string_repertoire() for ucs2, utf16, utf32 and NONASCII 8bit
character sets no longer stops at the first bad byte sequence with
the repertoire found so far, which could be MY_REPERTOIRE_NONE
(compatible with everything). It returns MY_REPERTOIRE_EXTENDED
for such strings. A unit test was added into unittest/strings.
- Adding CHARSET_INFO::is_ascii_superset(). It tells if a character set
can store all ASCII characters (it is false for swe7).
It is used in Item_func_conv_charset to calculate "safe", and in
left_is_algorithmically_simpler() to prefer other character sets
to those where ASCII strings cannot be converted safely.
- DBUG_ASSERTs were added into mysys/charset.c, to check that
the "tailoring" method is set in collation handlers when a collation
is added: compiled-in, from ctype-extra.c, or loaded from Index.xml.
- Adding a new function my_collations_equal_on_repertoire(cs1, cs2,
repertoire) in strings/. It tells if two collations are equal on
the repertoire, taking tailoring() results and PAD/NOPAD and the UCA
version into account. Callers do not compare tailoring() results
directly, so the way tailorings are compared (currently by the pointer
to the shared constant string) is private to strings/ and can be
extended later, e.g. for UCA collations on MY_REPERTOIRE_UNICODE30.
- Adding a new method DTCollation::aggregate_by_tailoring().
Collations with different MY_CS_NOPAD are never compatible.
UCA collations of different versions are not compatible on
the repertoire with ASCII punctuation, as the UCA version
affects its order (e.g. UCA-6.2.0 moved GRAVE ACCENT
and CIRCUMFLEX ACCENT after PERCENT SIGN).
- DTCollation::aggregate() now makes the repertoire of the result cover
the repertoires of both sides in all successful branches.
Before, set(dt) replaced the repertoire with the repertoire of the
winner side only, so the result could have a too narrow repertoire,
e.g. IF(1, 1.5, HEX(255)) had MY_REPERTOIRE_ASCII_ALNUM although the
value '1.5' has a punctuation character. With the more granular
repertoires this could wrongly allow mixing collations which are
equal on ALNUM but different on punctuation.
- Adding a new flag MY_COLL_ALLOW_BY_TAILORING.
It indicates to DTCollation::aggregate() that the illegal
mix optimization by repertoire can be used in the given context.
MY_COLL_CMP_CONV now includes MY_COLL_ALLOW_BY_TAILORING.
Note, only comparison operators pass this flag.
Functions returning a string result do not pass this flag,
because in operations like CONCAT(a,b) we still need to evaluate
precisely the collation of the result - we cannot just choose
a collation of one of the sides (even if they are compatible
on the given repertoire). This also applies to ExtractValue()
and UpdateXML(), which now aggregate their arguments without
this flag.
- As in my_repertoire_t the value MY_REPERTOIRE_ASCII is now a set of
bits rather than a single bit, the way to detect "is only ASCII"
repertoires has changed in the code.
For example:
// repertoire *IS* ascii
if (repertoire == MY_REPERTOIRE_ASCII)
has changed in multiple places in the code to
// repertoire *HAS* only ascii characters
if (my_repertoire_is_subset_of(repertoire, MY_REPERTOIRE_ASCII))
The new function my_repertoire_is_subset_of() in m_ctype.h
is used for this purpose in C code. In C++ code
DTCollation::repertoire_is_subset_of() is used, e.g.:
if (collation.repertoire_is_subset_of(MY_REPERTOIRE_ASCII))
- Repertoire of some expressions was adjusted to the new meaning:
* Item_null now has MY_REPERTOIRE_NONE (was ASCII).
* MY_LOCALE::repertoire() now returns MY_REPERTOIRE_UNICODE30
(was EXTENDED).
* Lex_string_with_metadata_st::repertoire(cs) now scans the string
contents to detect the actual repertoire.
* HEX() now has MY_REPERTOIRE_ASCII_ALNUM.
* DATE_FORMAT() decides on MY_REPERTOIRE_EXTENDED using the locale
which is actually used: the explicit third argument, or
@@lc_time_names. It was always @@lc_time_names before.
A non-constant locale argument is assumed to be non-ASCII.
* QUOTE, MAKE_SET, EXPORT_SET, LPAD, RPAD, GROUP_CONCAT, JSON_ARRAY,
JSON_OBJECT and JSON_OBJECTAGG add the repertoire of the extra
characters they put into the result (quotes, separators, padding,
brackets).
* LOWER() and UPPER() add the letters of both cases to the repertoire,
because the result can contain letters of the opposite case.
In Turkish collations they also add MY_REPERTOIRE_EXTENDED, as an
ASCII letter can be converted to a non-ASCII one (I -> dotless i).
Unicode collations are detected by the new member
casefold_info_st::can_convert_to_non_ascii_on_casefolding,
simple 8bit collations by to_lower['I'] and to_upper['i'].
- Lex_string_with_metadata_st::repertoire(cs) now scans a string literal
for any byte oriented character set (mbminlen==1), not only for
ASCII based ones. It was assumed to have the full repertoire for swe7,
which is not ASCII based. The scan is done by Unicode code points, so
swe7 strings with digits and letters get a narrow repertoire, while
e.g. 0x5B (LATIN CAPITAL LETTER A WITH DIAERESIS in swe7) is non-ASCII.
Therefore swe7_swedish_ci can be mixed with other collations now,
in the same way as other collations with MY_CS_IDENT_CASEUP_CI.
The test func_time was adjusted: a swe7 literal ' ull' with ASCII
characters is now safe to convert, the error is still tested for '[ull'.
- cp1250_czech_cs sorts -, . and 0..9 in the code point order, so it gets
the MINUS_DOT_DIGITS tailoring. latin2_czech_cs gets only DIGITS,
as it sorts the minus and the dot differently. Both were verified
with ctype_digits_verify.
- The tis620 collations now set CHARSET_INFO::tab_to_uni (was NULL),
so my_charset_is_ascii_based() is true for tis620.
It was false for tis620, although tis620 is ASCII compatible.
Therefore tis620 string literals were always considered to have
a non-ASCII repertoire, and the repertoire optimizations did not work
for them. Now ASCII-only tis620 literals are detected as ASCII.
This changes the result of subselect_extra_no_semijoin
from an error to success.
- tis620_thai_ci and tis620_thai_nopad_ci fold letters to lower case
and then compare by the code point on the entire ASCII range
(the Thai specific rules affect only non-ASCII characters).
A new function my_tailoring_ascii_casedn_ci() returns tailorings
for such collations on ALNUM, IDENT and ASCII. For example, the
underscore sorts before the letters, unlike in the caseup tailorings.
- New flags were added for CHARSET_INFO::state
* MY_CS_ASCII_CASEUP_CI - for simple 8bit case insensitive collations.
It means that this collation has no irregularities on the ASCII
repertoire, and converts lower case letters to upper case ones,
so the underscore sorts after the letters (with an upper to lower
case conversion it would sort before the letters).
* MY_CS_IDENT_CASEUP_CI - for simple 8bit case insensitive collations.
It means that this collation has no irregularities on the IDENT
repertoire (but can have irregularities say on punctuation).
* MY_CS_ASCII_STD_UCA - for UCA collations.
It means that a UCA collation does not reorder ASCII characters.
* MY_CS_DIGITS_STD - for any collation. It means that the ASCII digits
0..9 are sorted in the code point order and are not tailored, and,
for PAD collations, the space sorts before the digits. Strings of
digits are compared in the same way in all such collations, even if
they have irregularities on letters (latin7, cp866, czech, danish,
turkish UCA, etc.), or differ by case sensitivity. It is detected
from sort_order for 8bit collations, and from the tailoring rules
for UCA collations. Collations with MY_CS_DIGITS_STD still must have
the same PAD/NOPAD attribute.
* MY_CS_ASCII_MINUS_DOT_DIGITS - for any collation. Means
MY_CS_DIGITS_STD, and additionally the minus sorts before the dot,
which sorts before the digits (and the space sorts before the minus
in PAD collations). Strings like '-10.5' are compared in the same
way in all such collations. It is detected from sort_order for simple
8bit collations (my_coll_init_simple()), and from the tailoring rules
for UCA collations. For the multi-byte collations big5_chinese_ci,
gbk_chinese_ci, gb2312_chinese_ci and sjis_japanese_ci it is declared
by my_tailoring_ident_caseup_ci_generic(). The flags MY_CS_DIGITS_STD
and MY_CS_ASCII_MINUS_DOT_DIGITS are stored in ctype-extra.c for
compiled collations (conf_to_src.c prints them), and the detection is
skipped for a collation which already has any of the repertoire flags
(MY_CS_REPERTOIRE_FLAGS).
- strings/conf_to_src.c was modified to detect and print
MY_CS_ASCII_CASEUP_CI and MY_CS_IDENT_CASEUP_CI flags.
- strings/ctype-extra.c was regenerated with new flags.
- 8bit collations are not given MY_CS_ASCII_CASEUP_CI and
MY_CS_IDENT_CASEUP_CI if they are PAD and the space does not sort
before the digits. A shorter string is padded with spaces for
comparison, so the position of the space matters even for strings
without spaces ("ab" is compared to "abc" as "ab " to "abc").
A test collation latin1_space_after_letters_ci was added to
mysql-test/std_data/ldml/ for this. ctype-extra.c does not change.
- The initializer of my_collation_cs_handler in ctype-utf8.c
(utf8mb3_general_cs, under HAVE_UTF8_GENERAL_CS) was fixed to match
my_collation_handler_st: the missing get_id and get_collation_name
members were added, so that eq_collation was not initialized in their
place, and the new member "tailoring" is now set to my_tailoring_none.
- Results of the existing tests func_str, func_test, ps, view
and subselect_sj changed from "Illegal mix of collations" to success.
In these tests ASCII-only strings were compared using collations
with equal tailoring on ASCII, e.g. latin1_swedish_ci with
latin2_general_ci (func_str, ps), koi8r_general_ci with
latin1_swedish_ci (func_test), latin1_general_ci with
latin1_swedish_ci on letters and digits (view), cp932_japanese_ci
with latin1_swedish_ci (subselect_sj).
Such comparisons are now allowed.
Cases with collations that are still incompatible on ASCII,
e.g. latin7_general_ci, were added to the tests and still fail.
- Adding a number of MTR tests in
plugin/func_test/mysql-test/func_test/.
They display a tailoring by collation name and repertoire as
returned by:
cs->coll->tailoring(cs, some_repertoire)
A dynamically linked plugin function collation_tailoring() was added
for the purpose of these tests. Tailorings do not depend on PAD/NOPAD
and on the UCA version, so the function shows "[nopad]" for NOPAD
collations, and "[version X.Y.Z]" for UCA collations on the ASCII
repertoire. The version is formatted by a new class UCAVersion,
which uses a new method CharBuffer::append_uint8().
- Adding the test plugin/func_test/mysql-test/func_test/
ctype_caseup_ci_verify.test. It checks the order of ASCII characters
for all collations declared "caseup CI" on the ASCII or IDENT range.
- Adding the test plugin/func_test/mysql-test/func_test/
collation_tailoring_args.test. It checks the arguments of the plugin
function collation_tailoring(): the repertoire passed by name or by
number, and the NULL results for unknown names.
- Adding the test plugin/func_test/mysql-test/func_test/ctype_ldml.test.
It displays the tailorings of collations loaded at runtime from
Index.xml: simple 8bit collations (flags detected from the weights)
and Unicode collations (LDML rules which do or do not reorder ASCII).
- Adding a number of MTR tests mysql-test/main/ctype_xxx_tailoring.test
They display two-dimensional charts showing which collations
are compatible on which repertoires.
Tests for DATE_FORMAT() with an explicit locale were added to
ctype_big5_tailoring.test, ctype_cp932_tailoring.test and
ctype_latin5_tailoring.test, which also has the chart for latin5.
- Adding a number of MTR tests in the form of the originally
reported script for various collations:
SELECT Insert_priv FROM mysql.user WHERE Insert_priv='...';
The repeated blocks of queries are shared through
mysql-test/include/
ctype_tailoring_0{1,2,3}_mysql_user_Insert_priv*.inc.
- Adding tests to ctype_cp932.test checking that ExtractValue() and
UpdateXML() still raise "Illegal mix of collations".
1) take into account TMP_TABLE_ALL_COLUMNS when
we are modifying agg_item->result_field
2) remove unused now "bool materialized_subquery;"
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem:
CREATE TABLE ... SELECT ... FOR UPDATE involving a MyISAM temporary table can trigger an assertion in close_thread_tables() when binary logging is enabled in MIXED mode.
Cause:
MyISAM temporary tables do not support row-level locking, so SELECT ... FOR UPDATE acquires a write lock even when the access is read-only. This causes the table to be incorrectly classified as a write operation, preventing binlog_truncate_trx_cache() from running and eventually triggering the assertion.
Fix:
Update decide_logging_format() to use tbl->updating to distinguish actual table modifications from read-only accesses. For read-only access to temporary non-transactional tables, mark the statement as STMT_READS_TEMP_NON_TRANS_TABLE instead of treating it as a write operation. This prevents incorrect write classification and avoids the assertion failure.
Also reported as: https://github.com/mariadb-corporation/galera/issues/613.
THD::cleanup() cleared THD::wsrep_client_thread. Besides connection
close, THD::cleanup() is also called from THD::change_user() when
handling COM_CHANGE_USER and COM_RESET_CONNECTION. THD::init() does
not set the flag back, and the only place that sets it is
thd_prepare_connection(). After either command the session was no
longer treated as a wsrep client connection: WSREP_CLIENT() returned
false for the rest of the session.
As a result wsrep_sync_wait was silently ignored, so causal reads
could return stale data. Such connections were also skipped by
wsrep_close_client_connections() and
wsrep_wait_committing_connections_close(). Connection pools issue
COM_RESET_CONNECTION whenever a connection is reused, so in practice
most pooled sessions were affected.
Fix by moving the reset of wsrep_client_thread from THD::cleanup()
to end_connection(), after wsrep_close().
The galera.galera_change_user test is extended to do a causal read
on a fresh connection, after COM_CHANGE_USER and after
COM_RESET_CONNECTION. Each read must increase the provider's
wsrep_causal_reads status counter.
The "is it my own thread" check compared the login user name
(Security_context::user) and ignored the host, so u1@localhost could see
and kill threads of u1@'127.0.0.1'.
Compare the authenticated account instead:
* all comparisons are done in sctx->is_priv_user() now
* change user_matches() to priv_user_matches(), which uses is_priv_user()
* use it in KILL, KILL USER, SHOW PROCESSLIST, I_S.PROCESSLIST,
COM_PROCESS_INFO and SHOW EXPLAIN/ANALYZE FOR.
* all the remaining places use is_priv_user() directly instead
of doing strcmp: SHOW GRANTS, SHOW CREATE PROCEDURE, I_S.VIEWS,
the DEFINER clause, optimizer trace and change_security_context().
Assisted-by: Claude:claude-5-opus
user_var_entry objects and their names have a connection lifetime,
they exist until the connection ends (or is reset), and then they're
all deleted at once. This is exactly the use case for MEM_ROOT,
let's store them there.
Additionally, let's set MY_ROOT_USE_VMEM flag to keep this memroot
off the general heap where user_var_entry values are stored
and where heap buffer overflows can happen.
The latter makes memory allocations for the MEM_ROOT about 10x more
expensive, so let's always start with an empty memroot (= zero overhead
if no user variables are used) and on THD cleanup let's retain one
memroot block (= zero overhead if the next connection takes THD from the
cache and uses user variables up to one block size).
Assisted-By: Claude:claude-4.8-opus
Do not put any virtual column values into the before-image or after-image of
row events.
These virtual column values were causing assertion and probably other issues
as well. Concretely, a UNIQUE index on (int_col, blob_col) where the int_col
is being updated would include the hidden virtual column for the index in
the after-image, without including the value of the blob_col in
binlog_row_image=MINIMAL. This would cause an assertion during
TABLE::update_virtual_fields() due to missing bit in the bitmap.
Even if it doesn't cause an assertion, including the virtual column values
makes no sense, as they are recomputed anyway on the slave when applying the
row events.
Reviewed-by: Monty <monty@mariadb.org>
Brandon Nesterenko <brandon.nesterenko@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This issue is regression caused by MDEV-38019 Send ok packet
to client earlier.
BF aborts may be detected very late in command exectution,
somewhere near the end of do_command(). If the ok packet has
already been sent and BF abort is detected very late, this
could cause the protocol packets becoming out of sync.
This is a result of reverting order of releasing MDL and
sending ok packet to the client. If it happens in the
opposite order than before, there will remain some time
window where the select is complete and MDL locks still
held. DROP hits that time window, causing a BF abort,
and extra error packet gets injected into client-server
communication stream.
Fixed by not sending ok packet to client earlier
in wsrep case.
There is a repeatable test case that shows failure
if ok packet is sent client earlier by using
debug sync point. However, this fix skips sending ok
packet earlier causing also skipping the sync
point. Therefore, test case is not usable.
Test case galera_sr.mysql-wsrep-features#8 was failing
because of this regression but it is sporadic.
Co-Authored by : Teemu Ollakka <teemu.ollakka@mariadb.com>
Problem:
========
Purge threads computing virtual columns could crash due to:
1. Stale TABLE* pointers when tables are flushed/rebuilt during purge
2. open_purge_table() called close_thread_tables() on failure, making
MDL tickets invalid before purge could release them
3. Purge coordinator opened TABLE* but workers accessed it with wrong
TABLE->in_use
4. No retry mechanism when open_purge_table() failed due to concurrent
FLUSH TABLES, BACKUP STAGE, or ALTER TABLE operations
Solution:
========
1. Removed close_thread_tables() from open_purge_table(). Purge
coordinator thread should close explicitly in close_and_reopen()
2. Added retry logic: when open_purge_table() returns NULL due to
table flush/rebuild, set must_wait() flag and retry in
close_and_reopen()
3. Update close_and_reopen() with purge_table parameter to
close the failed table. Pass it to trx_purge_close_tables()
for proper cleanup
4. Properly set and reset TABLE::in_use during purge operations:
- Set to coordinator_thd in row_purge_parse_undo_rec() when opening
- Reset in trx_purge_close_table() when closing
5. The auto_increment initialization now happens unconditionally for
purge threads , ensuring the auto_increment counter is always
properly initialized when purge opens tables with virtual columns
Problem:
========
A single InnoDB purge worker thread can process undo logs from different
tables within the same batch. But get_purge_table(), open_purge_table()
incorrectly assumes that a 1:1 relationship between a purge worker thread
and a table within a single batch. Based on this wrong assumtion,
InnoDB attempts to reuse TABLE objects cached in thd->open_tables for
virtual column computation.
1) Purge worker opens Table A and caches the TABLE pointer in thd->open_tables.
2) Same purge worker moves to Table B in the same batch, get_purge_table()
retrieves the cached pointer for Table A instead of opening Table B.
3) Because innobase::open() is ignored for Table B, the virtual column
template is never initialized.
4) virtual column computation for Table B aborts the server
Solution:
========
- Introduced purge_table class which has the following
purge_table: Stores either TABLE* (for tables with indexed virtual
columns) or MDL_ticket* (for tables without) in a single union
using LSB as a flag.
For tables with indexed virtual columns: opens TABLE*, accesses
MDL_ticket* via TABLE->mdl_ticket
For tables without indexed virtual columns: stores only MDL_ticket*.
trx_purge_attach_undo_recs(): Coordinator opens both dict_table_t*
and TABLE* with proper MDL protection. Workers access cached
table pointers from purge_node_t->tables without opening
their own handles
purge_sys.coordinator_thd: Distinguish coordinator from workers
in cleanup logic. Skip innobase_reset_background_thd() for
coordinator thread to prevent premature table closure during
batch processing. Workers still call cleanup to release their
thread-local resources
trx_purge_close_tables():
Rewrite for purge coordinator thread
1) Close all dict_table_t* objects first
2) Call close_thread_tables() once for all TABLE* objects
3) Release MDL tickets last, after tables are closed
Added table->lock_mutex protection when reading (or) writing
vc_templ->mysql_table and mysql_table_query_id. Clear cached
TABLE* pointers before closing tables to prevent stale pointer
access
Declared open_purge_table() and close_thread_tables() in trx0purge.cc
Declared reset_thd() in row0purge.cc and dict0stats_bg.cc.
Removed innobase_reset_background_thd()
Remove the unscoped #pragma GCC diagnostic ignored
"-Wdeprecated-declarations" from include/violite.h and replace all
sprintf/vsprintf calls with snprintf/vsnprintf across the codebase.
Where possible, pass actual buffer sizes as function parameters
instead of using hardcoded constants or recomputing strlen().
Notable API changes:
- get_date(): added to_len parameter for buffer size
- nice_time(), end_timer() in client/mysql.cc: added buff_size
- generate_new_name(): added name_size parameter
- calc_md5(): added buffer_size parameter (fixes off-by-one)
- MD5_HASH_TO_STRING macro: added _size parameter
- Added MYSQL_UDF_MAX_RESULT_LENGTH constant in mysql_com.h
Also fixed a pre-existing bug in sql/rpl_mi.cc where the ellipsis
"..." was written to the wrong buffer (dbuff instead of buff).
Vendored code is excluded: extra/readline, extra/wolfssl,
wsrep-lib, libmariadb, storage/mroonga/vendor, zlib.
don't create a permanent stack of paths on the heap and in THD.
Do it on the stack like for sql_mode, sctx, abort_on_warning, and
other THD properties that often need to be changed temporarily.
Fix Sql_path constructor.
Definition
==========
Implement the SET PATH statement.
```
SET PATH 'schema1, schema2, schema3';
```
Function
--------
In MariaDB, the SQL-path will also be used to lookup packages in
package routine invocations, so the following script:
SET PATH 'sys';
SELECT UTL_ENCODE.BASE64_DECODE('data');
invokes SYS.UTL_ENCODE.BASE64_DECODE('data'), i.e. the function
BASE64_DECODE() in the packge UTL_ENCODE in the database SYS
(if such package and package routine exist).
MariaDB implementation details
------------------------------
The ticket's requirement stated the grammar should support delimited
identifiers with backticks or double quotes within the string quote,
ie: the single tick. A simple parser was implemented to handle this
requirement in Sql_path::from_text.
Only 16 schemas are supported per session - we do not want too many
schemas in the path anyway since it will impact performance. This also
means that the path cache is a simple static array for easier memory
management.
The error message shown when MAX_EXECUTION_TIME hint causes a timeout
incorrectly referred to "max_statement_time", which is a different
variable with different units (seconds vs milliseconds). This could
confuse users.
Before: "Query execution was interrupted (max_statement_time exceeded)"
After: "Query was interrupted: execution time limit 1.5 sec exceeded"
The new message is neutral and accurate for both max_statement_time
system variable and MAX_EXECUTION_TIME optimizer hint, displaying the
actual timeout value that was exceeded.
Problem was in wsrep_handle_mdl_conflict function was comparing
thd->lex->sql_command variable for granted MDL-lock.
There is two possible schedules:
(1) FLUSH TABLES ... FOR EXPORT that will take MDL-lock (granted_thd).
INSERT from other node is conflicting operation (request_thd)
and sees MDL-conflict. Because granted_thd has not executed anything
else thd->lex->sql_command == SQLCOM_FLUSH and this case was
correctly handled in wsrep_handle_mdl_conflict i.e. INSERT needs
to wait.
(2) FLUSH TABLES ... FOR EXPORT that will take MDL-lock (granted_thd).
SET SESSION wsrep_sync_wait=0; (granted_thd)
INSERT from other node is conflicting operation (request_thd)
However, thd->lex->sql_command is not stored to taken MDL-lock. Now
as granted_thd is executing SET thd->lex->sql_command != SQLCOM_FLUSH
and INSERT that is BF will abort it and that means also FTFE is
killed and MDL-lock relesed. This is incorrect as FTFE has written
file on filesystem and it can't be really killed.
In this fix wsrep_handle_mdl_conflict is refactored not to use
thd->lex->sql_command as a variable used for decisions. Instead
connection state can be determined also via THD members. E.g.:
* wsrep_thd_is_toi() || wsrep_thd_is_applying - ongoing TOI or applier
* wsrep_thd_is_BF - thread is brute force
* wsrep_thd_is_SR - thread is streaming replication thread
* thd->current_backup_stage != BACKUP_FINISHED - there's ongoing BACKUP
* thd->global_read_lock.is_acquired() - ongoing FTWRL
* thd->locked_tables_mode == LTM_LOCK_TABLES - ongoing FTFE or LOCK TABLES
Send ok packet earlier for SELECT queries that does not have any updates.
This is done in select_send::send_eof()
Axel's select benchmarks shows that this has a notable speed improvement:
1 Thread: 28% TPS speedup
8 Threads: 23%
64 Threads 6%
This was meassured with t_oltp_point_select With InnoDB running the client
over sockets.
Other things:
- Moved error reporting of LIMIT ROWS EXAMINED from handle_select() to
check_limit_rows_examined(). This is to ensure that the error is
reported before send_eof() is called.
- Removed duplicate "Query execution was interrupted" messages for the
same query. killed_for_exceeding_limit_rows_warning_given was introduced
for this purpose. We cannot use 'killed' flag in
killed_for_exceeding_limit_rows() to detect if we already have produced
a warning as the 'killed' in this case is reset for each union.
Reviewer: Sergei Golubchik <serg@mariadb.org>
Instead of `NULL`ifying of this member a finer approach is taken to
screen the replicated temporary tables from the slave applier
when it runs within `start_new_trans` context.
For that *all* access critical `THD::{has,lock,unlock}_temporary_tables`
functions are made to check possible `start_new_trans` condition.
This measure forces `start_new_trans` executing slave thread to always take
the normal thread access path to a temporary table repository.
This commit also unifies with sql/temporary_tables.cc checking of the
current thread is slave with usage of THD::rgi_slave instead of
THD::slave_thread (last time chosen by MDEV-33426).
Tested with rpl.create_or_replace_mix2 of GTT feature branch.
This bug happens when using galera, max_tmp_session_space_usage and a
transaction that uses temporary file of a size between 'binlog-cache-size'
(default 32K) and 64K followed by a change user command.
In the case of a transaction of size between 32k and 64k, the server don't
truncate the binary log file on disk to speed up things, which is fine.
The bug was that change_user() reset the tmp_space_used variable and the
next time the temporary_file was truncated, we got a negative value for
tmp_space_used, which caused the error "Local temporary space limit
reached".
Fixed by not resetting tmp_space_used in init(), which is called by
change_user().
Other things
- Truncate binary log cache files when change_user() is called. This
makes the new users session not depending on log file sizes by previous
user.
- Some new ASSERT and DBUG_ENTER
- Fixed typo in DBUG output in ma_pagecache.c
