Protocol_local fixed so it can be used now.
Some Protocol:: methods made virtual so they can adapt.
as well as net_ok and net_send_error functions.
execute_sql_string function is exported to the plugins.
To be changed with the mysql_use_result.
An alternative implementation (replacing the one based on repertoire).
This implementation makes Field send itself to Protocol_text using
data type specific Protocol methods rather than field->val_str()
followed by protocol_text->store_str().
As now Field sends itself in the same way to all protocol types
(e.g. Protocol_binary, Protocol_text, Protocol_local),
the method Field::send_binary() was renamed just to Field::send().
Note, this change introduces symmetry between Field and Item,
because Items also send themself using a single method Item::send(),
which is used for *all* protocol types.
Performance improvement is achieved by the fact that Protocol_text
implements these data type specific methods using store_numeric_string_aux()
rather than store_string_aux(). The conversion now happens only when
character_set_results is not ASCII compatible character sets
(e.g. UCS2, UTF16, UTF32).
In the old code (before any MDEV-23162 work, e.g. as of 10.5.4),
Protocol_text::store(Field*) used val_str() for all data types.
So the execution went through the character set conversion routines
even for numeric and temporal data types.
Benchmarking summary (see details in MDEV-23478):
The new approach stably demonstrates additional improvement comparing
to the previous implementation (the smaller time - the better):
Original - the commit before MDEV-23162
be98036f25
1m9.336s
1m9.290s
1m9.300s
MDEV-23162 - the repertoire optimization
1m6.101s
1m5.988s
1m6.264s
MDEV-23478 - this commit
1m2.150s
1m2.079s
1m2.099s
* Allocate items on thd->mem_root while refixing vcol exprs
* Make vcol tree changes register and roll them back after the statement is executed.
Explanation:
Due to collation implementation specifics an Item tree could change while fixing.
The tricky thing here is to make it on a proper arena.
It's usually not a problem when a field is deterministic, however, makes a pain vice-versa, during allocation allocating.
A non-deterministic field should be refixed on each statement, since it depends on the environment state.
Changing the tree will be temporary and therefore it should be reverted after the statement execution.
Avoid character set conversion for numeric data in this scenario:
SET NAMES utf8;
CREATE OR REPLACE TABLE t1 (a INT);
INSERT INTO t1 VALUES (1);
SELECT a FROM t1;
- Renaming this virtual method store() to store_str():
store(const char *str, size_t length, CHARSET_INFO *src_cs, CHARSET_INFO *dst_cs)
We'll be adding more variants of store*() soon. This change will help to avoid
ambiguities during overloading.
- Adding a helper method store_ident().
- Renaming store_str(const LEX_CSTRING &s...) to store_lex_cstring(),
to avoid ambiguties during overloading.
- Adding a helper method store() for backward compatibility, to avoid a lot of
changes in the code now. But eventually we should replace store() to
non-ambiguius methods store_str() or store_ident().
- Adding a helper method Protocol::needs_conversion() and reusing it
in two places.
The COM_MULTI did not take off. No connector is using it.
Remove related code from server, and client.
If anything it is a step simplification of already-bloated
dispatch_command(), and related code.
When a prepared statement parameter '?' is used in a CTE that is used
multiple times, the following happens:
- The CTE definition is re-parsed multiple times.
- There are multiple Item_param objects referring to the same "?" in
the original query.
- Prepared_statement::param has a pointer to the first of them, the
others are "clones".
- When prepared statement parameter gets the value, it should be passed
over to clones with param->sync_clones() call.
This call is made in insert_params(), etc. It was not made in
insert_params_with_log().
This would cause Item_param to not have any value which would confuse
the query optimizer.
Added the missing call.
All changes (except one) is of type
thd->transaction. -> thd->transaction->
thd->transaction points by default to 'thd->default_transaction'
This allows us to 'easily' have multiple active transactions for a
THD object, like when reading data from the mysql.proc table
(Variant #2 of the patch, which keeps the sp_head object inside the
MEM_ROOT that sp_head object owns)
(10.3 requires extra work due to sp_package, will commit a separate
patch for it)
sp_head::operator new() and operator delete() were dereferencing sp_head*
pointers to memory that didn't hold a valid sp_head object (it was
not created/already destroyed).
This caused UBSan to crash when looking up type information.
Fixed by providing static sp_head::create() and sp_head::destroy() methods.
(Variant #2 of the patch, which keeps the sp_head object inside the
MEM_ROOT that sp_head object owns)
(10.3 version of the fix, with handling for class sp_package)
sp_head::operator new() and operator delete() were dereferencing sp_head*
pointers to memory that didn't hold a valid sp_head object (it was
not created/already destroyed).
This caused UBSan to crash when looking up type information.
Fixed by providing static sp_head::create() and sp_head::destroy() methods.
- call current_schema::mark_as_changed() directly
- call state_change::mark_as_changed() directly
- replaced SESSION_TRACKER_CHANGED with dummy tracker
- replaced Session_tracker::mark_as_changed() with
State_tracker::mark_as_changed()
- hide and devirtualize original State_tracker::mark_as_changed(),
rename it to set_changed()
- all implementations of mark_as_changed() now check is_enabled() for
consistency
- no argument casts anymore
cmake -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_BUILD_TYPE=Debug
Maintainer mode makes all warnings errors. This patch fix warnings. Mostly about
deprecated `register` keyword.
Too much warnings came from Mroonga and I gave up on it.
The MDEV-17262 commit 26432e49d3
was skipped. In Galera 4, the implementation would seem to require
changes to the streaming replication.
In the tests archive.rnd_pos main.profiling, disable_ps_protocol
for SHOW STATUS and SHOW PROFILE commands until MDEV-18974
has been fixed.
Includes:
MDEV-17302 Add support for ALTER USER command in prepared statement
and
MDEV-17673 main.cte_recursive fails in bb-10.4-ps branch in --ps
Set correct SELECT_LEX linkage for recursive CTEs.
Do not delegate this job to TABLE_LIST::set_as_with_table,
because it is only run on prepare, while With_element::move_anchors_ahead
is run both on prepare and execute (fix by Igor)
Make mysqltest to use --ps-protocol more
use prepared statements for everything that server supports
with the exception of CALL (for now).
Fix discovered test failures and bugs.
tests:
* PROCESSLIST shows Execute state, not Query
* SHOW STATUS increments status variables more than in text protocol
* multi-statements should be avoided (see tests with a wrong delimiter)
* performance_schema events have different names in --ps-protocol
* --enable_prepare_warnings
mysqltest.cc:
* make sure run_query_stmt() doesn't crash if there's
no active connection (in wait_until_connected_again.inc)
* prepare all statements that server supports
protocol.h
* Protocol_discard::send_result_set_metadata() should not send
anything to the client.
sql_acl.cc:
* extract the functionality of getting the user for SHOW GRANTS
from check_show_access(), so that mysql_test_show_grants() could
generate the correct column names in the prepare step
sql_class.cc:
* result->prepare() can fail, don't ignore its return value
* use correct number of decimals for EXPLAIN columns
sql_parse.cc:
* discard profiling for SHOW PROFILE. In text protocol it's done in
prepare_schema_table(), but in --ps it is called on prepare only,
so nothing was discarding profiling during execute.
* move the permission checking code for SHOW CREATE VIEW to
mysqld_show_create_get_fields(), so that it would be called during
prepare step too.
* only set sel_result when it was created here and needs to be
destroyed in the same block. Avoid destroying lex->result.
* use the correct number of tables in check_show_access(). Saying
"as many as possible" doesn't work when first_not_own_table isn't
set yet.
sql_prepare.cc:
* use correct user name for SHOW GRANTS columns
* don't ignore verbose flag for SHOW SLAVE STATUS
* support preparing REVOKE ALL and ROLLBACK TO SAVEPOINT
* don't ignore errors from thd->prepare_explain_fields()
* use select_send result for sending ANALYZE and EXPLAIN, but don't
overwrite lex->result, because it might be needed to issue execute-time
errors (select_dumpvar - too many rows)
sql_show.cc:
* check grants for SHOW CREATE VIEW here, not in mysql_execute_command
sql_view.cc:
* use the correct function to check privileges. Old code was doing
check_access() for thd->security_ctx, which is invoker's sctx,
not definer's sctx. Hide various view related errors from the invoker.
sql_yacc.yy:
* initialize lex->select_lex for LOAD, otherwise it'll contain garbage
data that happen to fail tests with views in --ps (but not otherwise).
