The effect is that 'show processlist' will show the Slave SQL thread
until the thread ends. This may help finding cases where the Slave SQL
thread could hang for some time during the cleanup part.
The Slave SQL thread will have the state "Slave SQL thread ending' during
this stage.
Reviewed-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The issue was that the test did not take into account that the IO thread
could have been in COMMAND=Connecting state, which happens before the
COMMANMD=Slave_IO state.
The test is a bit fragile as it depends on the COMMAND state to be
syncronised with the Slave_IO_State, which is not the case.
I added a new proc state and some more information to the error
output to be able to diagnose future failures more easily.
The feedback plugin server_uid variable and the calculate_server_uid()
function is moved from feedback/utils.cc to sql/mysqld.cc
server_uid is added as a global variable (shown in 'show variables') and
is written to the error log on server startup together with server version
and server commit id.
We have an issue if a user have the following in a configuration file:
log_slow_filter="" # Log everything to slow query log
log_queries_not_using_indexes=ON
This set log_slow_filter to 'not_using_index' which disables
slow_query_logging of most queries.
In effect, on should never use log_slow_filter="" in config files but
instead use log_slow_filter=ALL.
Fixed by changing log_slow_filter="" that comes either from a
configuration file or from the command line, when starting to the server,
to log_slow_filter=ALL.
A warning will be printed when this happens.
Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
(backported from 10.6)
Improve detection for DES support in OpenSSL, to allow compilation
against system OpenSSL without DES.
Note that MariaDB needs to be compiled against OpenSSL-like library
that itself has DES support which cmake detected. Positive detection
is indicated with CMake variable HAVE_des 1.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@surgut.co.uk>
Fixed that internal temporary tables are not waiting for freed disk space.
Other things:
- 'kill id' will now kill a query waiting for free disk space instantly.
Before it could take up to 60 seconds for the kill would be noticed.
- Fixed that sorting one index is not using MY_WAIT_IF_FULL for temp files.
- Fixed bug where share->write_flag set MY_WAIT_IF_FULL for temp files.
It is quite hard to do a test case for this. Instead I tested all
combinations interactively.
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
binlog_space_limit is a variable in Percona server used to limit the total
size of all binary logs.
This implementation is based on code from Percona server 5.7.
In MariaDB we decided to call the variable max-binlog-total-size to be
similar to max-binlog-size. This makes it easier to find in the output
from 'mariadbd --help --verbose'). MariaDB will also support
binlog_space_limit for compatibility with Percona.
Some internal notes to explain implementation notes:
- When running MariaDB does not delete binary logs that are either
used by slaves or have active xid that are not yet committed.
Some implementation notes:
- max-binlog-total-size is by default 0 (no limit).
- max-binlog-total-size can be changed without server restart.
- Binlog file sizes are checked on startup, or if
max-binlog-total-size is set to a value > 0, not for every log write.
The total size of all binary logs is cached and dynamically updated
when updating the binary log on binary log rotation.
- max-binlog-total-size is checked against existing log files during
serverstart, binlog rotation, FLUSH LOGS, when writing to binary log
or when max-binlog-total-size changes value.
- Option --slave-connections-needed-for-purge with 1 as default added.
This allows one to ensure that we do not delete binary logs if there
is less than 'slave-connections-needed-for-purge' connected.
Without this option max-binlog-total-size would potentially delete
binlogs needed by slaves on server startup or when a slave disconnects
as there are then no connected slaves to protect active binlogs.
- PURGE BINARY LOGS TO ... will be executed as if
slave-connectitons-needed-for-purge would be zero. In other words
it will do the purge even if there is no slaves connected. If there
are connected slaves working on the logs, these will be protected.
- If binary log is on and max-binlog-total_size <> 0 then the status
variable 'Binlog_disk_use' shows the current size of all old binary
logs + the state of the current one.
- Removed test of strcmp(log_file_name, log_info.log_file_name) in
purge_logs_before_date() as this is tested in can_purge_logs()
- To avoid expensive calls of log_in_use() we cache the result for the
last log that is in use by a slave. Future calls to can_purge_logs()
for this binary log will be quickly detected and false will be returned
until a slave starts working on a new log.
- Note that after a binary log rotation caused by max_binlog_size,
the last log will not be purged directly as it is still in use
internally. The next binary log write will purge binlogs if needed.
Reviewer:Kristian Nielsen <knielsen@knielsen-hq.org>
if the client enabled --ssl-verify-server-cert, then
the server certificate is verified as follows:
* if --ssl-ca or --ssl-capath were specified, the cert must have
a proper signature by the specified CA (or CA in the path)
and the cert's hostname must match the server's hostname.
If the cert isn't signed or a hostname is wrong - the
connection is aborted.
* if MARIADB_OPT_TLS_PEER_FP was used and the fingerprint matches,
the connection is allowed, if it doesn't match - aborted.
* If the connection uses unix socket or named pipes - it's allowed.
(consistent with server's --require-secure-transport behavior)
otherwise the cert is still in doubt, we don't know if we can trust
it or there's an active MitM in progress.
* If the user has provided no password or the server requested an
authentication plugin that sends the password in cleartext -
the connection is aborted.
* Perform the authentication. If the server accepts the password,
it'll send SHA2(scramble || password hash || cert fingerprint)
with the OK packet.
* Verify the SHA2 digest, if it matches - the connection is allowed,
otherwise it's aborted.
Improve the performance of slave connect using B+-Tree indexes on each binlog
file. The index allows fast lookup of a GTID position to the corresponding
offset in the binlog file, as well as lookup of a position to find the
corresponding GTID position.
This eliminates a costly sequential scan of the starting binlog file
to find the GTID starting position when a slave connects. This is
especially costly if the binlog file is not cached in memory (IO
cost), or if it is encrypted or a lot of slaves connect simultaneously
(CPU cost).
The size of the index files is generally less than 1% of the binlog data, so
not expected to be an issue.
Most of the work writing the index is done as a background task, in
the binlog background thread. This minimises the performance impact on
transaction commit. A simple global mutex is used to protect index
reads and (background) index writes; this is fine as slave connect is
a relatively infrequent operation.
Here are the user-visible options and status variables. The feature is on by
default and is expected to need no tuning or configuration for most users.
binlog_gtid_index
On by default. Can be used to disable the indexes for testing purposes.
binlog_gtid_index_page_size (default 4096)
Page size to use for the binlog GTID index. This is the size of the nodes
in the B+-tree used internally in the index. A very small page-size (64 is
the minimum) will be less efficient, but can be used to stress the
BTree-code during testing.
binlog_gtid_index_span_min (default 65536)
Control sparseness of the binlog GTID index. If set to N, at most one
index record will be added for every N bytes of binlog file written.
This can be used to reduce the number of records in the index, at
the cost only of having to scan a few more events in the binlog file
before finding the target position
Two status variables are available to monitor the use of the GTID indexes:
Binlog_gtid_index_hit
Binlog_gtid_index_miss
The "hit" status increments for each successful lookup in a GTID index.
The "miss" increments when a lookup is not possible. This indicates that the
index file is missing (eg. binlog written by old server version
without GTID index support), or corrupt.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The crash happened with an indexed virtual column whose
value is evaluated using a function that has a different meaning
in sql_mode='' vs sql_mode=ORACLE:
- DECODE()
- LTRIM()
- RTRIM()
- LPAD()
- RPAD()
- REPLACE()
- SUBSTR()
For example:
CREATE TABLE t1 (
b VARCHAR(1),
g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL,
KEY g(g)
);
So far we had replacement XXX_ORACLE() functions for all mentioned function,
e.g. SUBSTR_ORACLE() for SUBSTR(). So it was possible to correctly re-parse
SUBSTR_ORACLE() even in sql_mode=''.
But it was not possible to re-parse the MariaDB version of SUBSTR()
after switching to sql_mode=ORACLE. It was erroneously mis-interpreted
as SUBSTR_ORACLE().
As a result, this combination worked fine:
SET sql_mode=ORACLE;
CREATE TABLE t1 ... g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL, ...;
INSERT ...
FLUSH TABLES;
SET sql_mode='';
INSERT ...
But the other way around it crashed:
SET sql_mode='';
CREATE TABLE t1 ... g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL, ...;
INSERT ...
FLUSH TABLES;
SET sql_mode=ORACLE;
INSERT ...
At CREATE time, SUBSTR was instantiated as Item_func_substr and printed
in the FRM file as substr(). At re-open time with sql_mode=ORACLE, "substr()"
was erroneously instantiated as Item_func_substr_oracle.
Fix:
The fix proposes a symmetric solution. It provides a way to re-parse reliably
all sql_mode dependent functions to their original CREATE TABLE time meaning,
no matter what the open-time sql_mode is.
We take advantage of the same idea we previously used to resolve sql_mode
dependent data types.
Now all sql_mode dependent functions are printed by SHOW using a schema
qualifier when the current sql_mode differs from the function sql_mode:
SET sql_mode='';
CREATE TABLE t1 ... SUBSTR(a,b,c) ..;
SET sql_mode=ORACLE;
SHOW CREATE TABLE t1; -> mariadb_schema.substr(a,b,c)
SET sql_mode=ORACLE;
CREATE TABLE t2 ... SUBSTR(a,b,c) ..;
SET sql_mode='';
SHOW CREATE TABLE t1; -> oracle_schema.substr(a,b,c)
Old replacement names like substr_oracle() are still understood for
backward compatibility and used in FRM files (for downgrade compatibility),
but they are not printed by SHOW any more.
Compute binlog checksums (when enabled) already when writing events
into the statement or transaction caches, where before it was done
when the caches are copied to the real binlog file. This moves the
checksum computation outside of holding LOCK_log, improving
scalabitily.
At stmt/trx cache write time, the final end_log_pos values are not
known, so with this patch these will be set to 0. Events that are
written directly to the binlog file (not through stmt/trx cache) keep
the correct end_log_pos value. The GTID and COMMIT/XID events at the
start and end of event groups are written directly, so the zero
end_log_pos is only for events in the middle of event groups, which
do not negatively affect replication.
An option --binlog-legacy-event-pos, off by default, is provided to
disable this behavior to provide backwards compatibility with any
external applications that might rely on end_log_pos in events in the
middle of event groups.
Checksums cannot be pre-computed when binlog encryption is enabled, as
encryption relies on correct end_log_pos to provide part of the
nonce/IV.
Checksum pre-computation is also disabled for WSREP/Galera, as it uses
events differently in its write-sets and so on. Extending pre-computation of
checksums to Galera where it makes sense could be added in a future patch.
The current --binlog-checksum configuration is saved in
binlog_cache_data at transaction start and used to pre-compute
checksums in cache, if applicable. When the cache is later copied to
the binlog, a check is made if the saved value still matches the
configured global value; if so, the events are block-copied directly
into the binlog file. If --binlog-checksum was changed during the
transaction, events are re-written to the binlog file one-by-one and
the checksums recomputed/discarded as appropriate.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
In particular:
* @@debug
deprecated since 5.5.37
* sr_YU locale
deprecated since 10.0.11
* "engine_condition_pushdown" in the @@optimizer_switch
deprecated since 10.1.1
* @@date_format, @@datetime_format, @@time_format, @@max_tmp_tables
deprecated since 10.1.2
* @@wsrep_causal_reads
deprecated since 10.1.3
* "parser" in mroonga table comment
deprecated since 10.2.11
