In Log_event::read_log_event(), don't use IO_CACHE::error of the relay log's
IO_CACHE to signal an error back to the caller. When reading the active
relay log, this flag is also being used by the IO thread, and setting it can
randomly cause the IO thread to wrongly detect IO error on writing and
permanently disable the relay log.
This was seen sporadically in test case rpl.rpl_from_mysql80. The read
error set by the SQL thread in the IO_CACHE would be interpreted as a
write error by the IO thread, which would cause it to throw a fatal
error and close the relay log. And this would later cause CHANGE
MASTER to try to purge a closed relay log, resulting in nullptr crash.
SQL thread is not able to parse an event read from the relay log. This
can happen like here when replicating unknown events from a MySQL master,
potentially also for other reasons.
Also fix a mistake in my_b_flush_io_cache() introduced back in 2001
(fa09f2cd7e) where my_b_flush_io_cache() could wrongly return an error set
in IO_CACHE::error, even if the flush operation itself succeeded.
Also fix another sporadic failure in rpl.rpl_from_mysql80 where the outout
of MASTER_POS_WAIT() depended on timing of SQL and IO thread.
Reviewed-by: Monty <monty@mariadb.org>
Reviewed-by: Andrei Elkin <andrei.elkin@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MDEV-29533 Crash when MariaDB is replica of MySQL 8.0
MySQL 8.0 has added the following new events in the MySQL binary log
PARTIAL_UPDATE_ROWS_EVENT
TRANSACTION_PAYLOAD_EVENT
HEARTBEAT_LOG_EVENT_V2
- PARTIAL_UPDATE_ROWS_EVENT is used by MySQL to generate update
statements using JSON_SET, JSON_REPLACE and JSON_REMOVE to make
update of JSON columns more efficient. These events can be
disabled by setting 'binlog-row-value-options=""'
- TRANSACTION_PAYLOAD_EVENT is used by MySQL to signal that a
row event is compressed. It an be disably by setting
'binlog_transaction_compression=0'.
- HEARTBEAT_LOG_EVENT_V2 is written to the binary log many times
per seconds. It can be ignored by the server.
What this patch does:
- If PARTIAL_UPDATE_ROWS_EVENT or TRANSACTION_PAYLOAD_EVENT is found,
the server will stop with an error message of how to disable the
MySQL server to generate such events.
- HEARTBEAT_LOG_EVENT_V2 events are ignored.
- mariadb-binlog will write the name of the new events.
- mariadb-binlog will stop if PARTIAL_UPDATE_ROWS_EVENT or
TRANSACTION_PAYLOAD_EVENT is found, unless --force is given.
- Fixes a crash in mariadb-binlog if a character set unknown to
MariaDB is found. (MDEV-29533)
From Kristian Nielsen:
- Add test case for MySQL 8.0 to MariaDB replication and fixed a
a small typo in post_header_len initialization.
Reviewer: knielsen@mariadb.org
The Write_rows_log_event originally allocated the m_rows_buf up-front, and
thus is_valid() checks that the buffer is allocated correctly. But at some
point this was changed to allocate the buffer lazily on demand. This means
that a a valid event can now have m_rows_buf==NULL. The is_valid() code was
not changed, and thus is_valid() could return false on a valid event.
This caused a bug for REPLACE INTO t() VALUES(), () which generates a
write_rows event with no after image; then the m_rows_buf was never
allocated and is_valid() incorrectly returned false, causing an error in
some other parts of the code.
Also fix a couple of missing special cases in the code for mysqlbinlog to
correctly decode (in comments) row events with missing after image.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
There are two problems.
First, replication fails when XA transactions are used where the
slave has replicate_do_db set and the client has touched a different
database when running DML such as inserts. This is because XA
commands are not treated as keywords, and are thereby not exempt
from the replication filter. The effect of this is that during an XA
transaction, if its logged “use db” from the master is filtered out
by the replication filter, then XA END will be ignored, yet its
corresponding XA PREPARE will be executed in an invalid state,
thereby breaking replication.
Second, if the slave replicates an XA transaction which results in
an empty transaction, the XA START through XA PREPARE first phase of
the transaction won’t be binlogged, yet the XA COMMIT will be
binlogged. This will break replication in chain configurations.
The first problem is fixed by treating XA commands in
Query_log_event as keywords, thus allowing them to bypass the
replication filter. Note that Query_log_event::is_trans_keyword() is
changed to accept a new parameter to define its mode, to either
check for XA commands or regular transaction commands, but not both.
In addition, mysqlbinlog is adapted to use this mode so its
--database filter does not remove XA commands from its output.
The second problem fixed by overwriting the XA state in the XID
cache to be XA_ROLLBACK_ONLY, so at commit time, the server knows to
rollback the transaction and skip its binlogging. If the xid cache
is cleared before an XA transaction receives its completion command
(e.g. on server shutdown), then before reporting ER_XAER_NOTA when
the completion command is executed, the filter is first checked if
the database is ignored, and if so, the error is ignored.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
A GTID event can have variable length, with contributing factors
such as the variable length from the flags2 and optional extra flags
fields. These fields are bitmaps, where each set bit indicates an
additional value that should be appended to the event, e.g.
multi-engine transactions append a number to indicate the number of
additional engines a transaction uses. However, if a flags bit is
set, and no additional fields are appended to the event, MDEV-33672
reports that the server can still try to read from memory as if it
did exist. Note, however, in debug builds, this condition is
asserted for FL_EXTRA_MULTI_ENGINE.
This patch fixes this to check that the length of the event is
aligned with the expectation set by the flags for FL_PREPARED_XA,
FL_COMPLETED_XA, and FL_EXTRA_MULTI_ENGINE.
Reviewed By
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
MDEV-33502 Slowdown when running nested statement with many partitions
This change was triggered to help some MariaDB users with close to
10000 bits in their bitmaps.
- Change underlaying storage to be 64 bit instead of 32bit.
- This reduses number of loops to scan bitmaps.
- This can cause some bitmaps to be 4 byte large.
- Ensure that all not used top-bits are always 0 (simplifes code as
the last 64 bit storage is not a special case anymore).
- Use my_find_first_bit() to find the first set bit which is much faster
than scanning trough things byte by byte and then bit by bit.
Other things:
- Added a bool to remember if my_bitmap_init() did allocate the bitmap
array. my_bitmap_free() will only free arrays it did allocate.
This allowed me to remove setting 'bitmap=0' before calling
my_bitmap_free() for cases where the bitmap's where allocated externally.
- my_bitmap_init() sets bitmap to 0 in case of failure.
- Added 'universal' asserts to most bitmap functions.
- Change all remaining calls to bitmap_init() to my_bitmap_init().
- To finish the change from 2014.
- Changed all usage of uint32 in my_bitmap.h to my_bitmap_map.
- Updated bitmap_copy() to handle bitmaps of different size.
- Removed const from bitmap_exists_intersection() as this caused casts
on all usage.
- Removed not used function bitmap_set_above().
- Renamed create_last_word_mask() to create_last_bit_mask() (to match
name changes in my_bitmap.cc)
- Extended bitmap-t with test for more bitmap functions.
This reverts commit c37b2087b4.
In c37b20887, when re-binlogging a GTID event on a replica,
it will overwrite the thread_id from the primary to be the
value of the slave applier (SQL thread or parallel worker).
This should be the value of the original thread_id on the
master connection though, to both help track temporary
tables, and be consistent with Query_log_event.
Reverting the commit to re-target 11.5, so we can re-test
with the corrected thread_id.
Most things where wrong in the test suite.
The one thing that was a bug was that table_map_id was in some places
defined as ulong and in other places as ulonglong. On Linux 64 bit this
is not a problem as ulong == ulonglong, but on windows this caused failures.
Fixed by ensuring that all instances of table_map_id are ulonglong.
This patch augments Gtid_log_event with the user thread-id.
In particular that compensates for the loss of this info in
Rows_log_events.
Gtid_log_event::thread_id gets visible in mysqlbinlog output like
#231025 16:21:45 server id 1 end_log_pos 537 CRC32 0x1cf1d963 GTID 0-1-2 ddl thread_id=10
as 64 bit unsigned integer.
While the size of Gtid event has grown by 8-9 bytes
replication from OLD <-> NEW is not affected by it.
This work was started by the late Sujatha Sivakumar.
Brandon Nesterenko took it over, reviewed initial patches and extended
the work.
Reviewed-by: <andrei.elkin@mariadb.com>
Summary
=======
With FULL_NODUP mode, before image inclues all columns and after
image inclues only the changed columns. flashback will swap the
value of changed columns from after image to before image.
For example:
BI: c1, c2, c3_old, c4_old
AI: c3_new, c4_new
flashback will reconstruct the before and after images to
BI: c1, c2, c3_new, c4_new
AI: c3_old, c4_old
Implementation
==============
When parsing the before and after image, position and length of
the fields are collected into ai_fields and bi_fields, if it is an
Update_rows_event and the after image doesn't includes all columns.
The changed fields are swapped between bi_fields and ai_fields.
Then it recreates the before image and after image by using
bi_fields and ai_fields. nullbit will be set to 1 if the
field is NULL, otherwise nullbit will be 0.
It also optimized flashback a little bit.
- calc_row_event_length is used instead of print_verbose_one_row
- swap_buff1 and swap_buff2 are removed.
