- Fix that binlog_gtid_pos() (and hence slave connect) does not work
correctly in the very first binlog file (due to not logging empty
Gtid_list_log_event).
- Remove one instance of the stupid domain_id-0-is-implicit.
- Rename the confusing Gtid_Pos_Auto in SHOW SLAVE STATUS to Using_Gtid.
- Fix memory leak.
- Fix that slave GTID state was updated from the wrong place in the code,
causing random crashing and other misery.
- Fix updates to mysql.rpl_slave_state to not go to binlog (this would cause
duplicate key errors on the slave and is generally the wrong thing to do).
In method mysql_binlog_send, right after detecting a EOF in the
read event loop, and before deciding if we should change to a new
binlog file there is a execution window where new events can be
written to the binlog and a rotation can happen. When reaching
the test, the function will then change to a new binlog file
ignoring all the events written in this window. This will result
in events not being replicated.
Only when the binlog is detected as deactivated in the event loop
of the dump thread, can we really know that no more events
remain. For this reason, this test is now made under the log lock
in the beginning of the event loop when reading the events.
In method mysql_binlog_send, right after detecting a EOF in the
read event loop, and before deciding if we should change to a new
binlog file there is a execution window where new events can be
written to the binlog and a rotation can happen. When reaching
the test, the function will then change to a new binlog file
ignoring all the events written in this window. This will result
in events not being replicated.
Only when the binlog is detected as deactivated in the event loop
of the dump thread, can we really know that no more events
remain. For this reason, this test is now made under the log lock
in the beginning of the event loop when reading the events.
Slave now loads the GTID state from the master when connecting with
old-style filename/offset position.
This allows the user to use MASTER_GTID_POS=AUTO on next CHANGE MASTER
without any other action needed.
Implement binlog_gtid_pos() function. This will be used so that
the slave can obtain the gtid position automatically from first
connect with old-style position - then MASTER_GTID_POS=AUTO will
work the next time. Can also be used by mysqldump --master-data
to give the current gtid position directly.
On a previous fix, user variables with zero length name were incorrectly
considered as event corruption, despite that them are allowed by server.
Fix this wrong assumption by allowing again user variables with zero
length on binary log.
On a previous fix, user variables with zero length name were incorrectly
considered as event corruption, despite that them are allowed by server.
Fix this wrong assumption by allowing again user variables with zero
length on binary log.
When starting slave, check binlog state in addition to mysql.rpl_slave.state.
This allows to switch a previous master to be a slave directly
with MASTER_GTID_POS=AUTO.
RATHER THAN A TABLE
Problem: In RBR, If a table is converted into a view at slave,
(i.e., "drop table 'object1'" & "create view 'object1'"), then any
DML operations on the table at master are causing crash at slave.
Analysis: Slave prepares tables to be opened for DML list when it
receives Table_map_log_event(s). And the same list will be sent to
open_table function. Open_table logic assumes that if the list
contains a view object, it also contains "select_lex" object of
that view. In the above special case, the table object does not
contain 'select_lex' as it is base table at master. Since it
is a view at slave, open_table logic goes to 'mysql_make_view()'
function which assumes that 'select_lex' exists for the object.
Fix: While preparing 'tables to be opened' list, we should make
sure that table required type is 'base table'. If it is not
base table while opening the object, mysql_make_view will throw an
error similar to 'object is not a base table'
sql/log_event.cc:
Restrict that all table_map_log_event's objects should be
base tables @ slave also.
RATHER THAN A TABLE
Problem: In RBR, If a table is converted into a view at slave,
(i.e., "drop table 'object1'" & "create view 'object1'"), then any
DML operations on the table at master are causing crash at slave.
Analysis: Slave prepares tables to be opened for DML list when it
receives Table_map_log_event(s). And the same list will be sent to
open_table function. Open_table logic assumes that if the list
contains a view object, it also contains "select_lex" object of
that view. In the above special case, the table object does not
contain 'select_lex' as it is base table at master. Since it
is a view at slave, open_table logic goes to 'mysql_make_view()'
function which assumes that 'select_lex' exists for the object.
Fix: While preparing 'tables to be opened' list, we should make
sure that table required type is 'base table'. If it is not
base table while opening the object, mysql_make_view will throw an
error similar to 'object is not a base table'
KILL now breaks locks inside InnoDB
Fixed possible deadlock when running INNODB STATUS
Added ha_kill_query() and kill_query() to send kill signal to all storage engines
Added reset_killed() to ensure we don't reset killed state while awake() is getting called
include/mysql/plugin.h:
Added thd_mark_as_hard_kill()
include/mysql/plugin_audit.h.pp:
Added thd_mark_as_hard_kill()
include/mysql/plugin_auth.h.pp:
Added thd_mark_as_hard_kill()
include/mysql/plugin_ftparser.h.pp:
Added thd_mark_as_hard_kill()
sql/handler.cc:
Added ha_kill_query() to send kill signal to all storage engines
sql/handler.h:
Added ha_kill_query() and kill_query() to send kill signal to all storage engines
sql/log_event.cc:
Use reset_killed()
sql/mdl.cc:
use thd->killed instead of thd_killed() to abort on soft kill
sql/sp_rcontext.cc:
Use reset_killed()
sql/sql_class.cc:
Fixed possible deadlock in INNODB STATUS by not getting thd->LOCK_thd_data if it's locked.
Use reset_killed()
Tell storge engines that KILL has been sent
sql/sql_class.h:
Added reset_killed() to ensure we don't reset killed state while awake() is getting called.
Added mark_as_hard_kill()
sql/sql_insert.cc:
Use reset_killed()
sql/sql_parse.cc:
Simplify detection of killed queries.
Use reset_killed()
sql/sql_select.cc:
Use reset_killed()
sql/sql_union.cc:
Use reset_killed()
storage/innobase/handler/ha_innodb.cc:
Added innobase_kill_query()
Fixed error reporting for interrupted queries.
storage/xtradb/handler/ha_innodb.cc:
Added innobase_kill_query()
Fixed error reporting for interrupted queries.
FORMAT_DESCRIPTION_LOG_EVENT::CALC_SERVER_VERSION_SPLIT
Problem: When reading a Format_description_log_event, it supposes MySQL
version is always valid and DBUG_ASSERTION is used check the version number.
However, user may give a wrong binlog offset, even give a faked binary event
which includes an invalid MySQL version. This will cause server crash.
Fix: The assertions are removed and an error will be reported if MySQL
version in Format_description_log_event is invalid.
FORMAT_DESCRIPTION_LOG_EVENT::CALC_SERVER_VERSION_SPLIT
Problem: When reading a Format_description_log_event, it supposes MySQL
version is always valid and DBUG_ASSERTION is used check the version number.
However, user may give a wrong binlog offset, even give a faked binary event
which includes an invalid MySQL version. This will cause server crash.
Fix: The assertions are removed and an error will be reported if MySQL
version in Format_description_log_event is invalid.
Now slave can connect to master, sending start position as slave state
rather than old-style binlog name/position.
This enables to switch to a new master by changing just connection
information, replication slave GTID state ensures that slave starts
at the correct point in the new master.
VARIABLES
Analysis:
-------------
After executing the query, new value of the user defined
variables are set in the function "select_dumpvar::send_data".
"select_dumpvar::send_data" first calls function
"Item_func_set_user_var::save_item_result()". This function
checks the nullness of the Item_field passed as parameter
to it and saves it. The nullness of item is stored with
arg[0]'s null_value flag. Then "select_dumpvar::send_data" calls
"Item_func_set_user_var::update()" which notices null
result that was saved and calls "Item_func_set_user_var::
update_hash". But here null_value is not set and args[0]
is different from that given to function "Item_func_set_user_var::
set_item_result()". This causes "Item_func_set_user_var::
update_hash" function to believe that its getting non-null value.
"user_var_entry::length" set to 0 and hence "user_var_entry::value"
is made to point to extra_area allocated in "user_var_entry".
And "Item_func_set_user_var::update_hash" tries to write
at memory beyond extra_area for result type DECIMAL. Because of
this invalid write issue is reported by Valgrind.
Before this bug was introduced, we avoided this problem by
creating "Item_func_set_user_var" object with the same
Item_field as arg[0] and as parameter to
Item_func_set_user_var::save_item_result(). But now
they are refering to different args[0]. Because of this
null_value flag set in parameter Item_field in function
"Item_func_set_user_var::save_item_result()" is not
reflected in "Item_func_set_user_var" object.
Fix:
------------
This issue is reported on versions 5.5.24. Issue does not exists
in 5.5.23, 5.1, 5.6 and trunk.
This issue was introduced by
revid:georgi.kodinov@oracle.com-20120309130449-82e3bs5v3et1x0ef (fix for
bug #12408412), which was pushed into 5.5 and later releases. This patch
has later been reversed in 5.6 and trunk by
revid:norvald.ryeng@oracle.com-20121010135242-xj34gg73h04hrmyh (fix for
bug #14664077). Backported this patch in 5.5 also to fix this issue.
sql/item_func.cc:
here unsigned value is converted to signed value.
sql/item_func.h:
last_insert_id() gives an auto_incremented value which can be
positive only,so defined it as a unsigned longlong sets the
unsigned_flag to 1.
VARIABLES
Analysis:
-------------
After executing the query, new value of the user defined
variables are set in the function "select_dumpvar::send_data".
"select_dumpvar::send_data" first calls function
"Item_func_set_user_var::save_item_result()". This function
checks the nullness of the Item_field passed as parameter
to it and saves it. The nullness of item is stored with
arg[0]'s null_value flag. Then "select_dumpvar::send_data" calls
"Item_func_set_user_var::update()" which notices null
result that was saved and calls "Item_func_set_user_var::
update_hash". But here null_value is not set and args[0]
is different from that given to function "Item_func_set_user_var::
set_item_result()". This causes "Item_func_set_user_var::
update_hash" function to believe that its getting non-null value.
"user_var_entry::length" set to 0 and hence "user_var_entry::value"
is made to point to extra_area allocated in "user_var_entry".
And "Item_func_set_user_var::update_hash" tries to write
at memory beyond extra_area for result type DECIMAL. Because of
this invalid write issue is reported by Valgrind.
Before this bug was introduced, we avoided this problem by
creating "Item_func_set_user_var" object with the same
Item_field as arg[0] and as parameter to
Item_func_set_user_var::save_item_result(). But now
they are refering to different args[0]. Because of this
null_value flag set in parameter Item_field in function
"Item_func_set_user_var::save_item_result()" is not
reflected in "Item_func_set_user_var" object.
Fix:
------------
This issue is reported on versions 5.5.24. Issue does not exists
in 5.5.23, 5.1, 5.6 and trunk.
This issue was introduced by
revid:georgi.kodinov@oracle.com-20120309130449-82e3bs5v3et1x0ef (fix for
bug #12408412), which was pushed into 5.5 and later releases. This patch
has later been reversed in 5.6 and trunk by
revid:norvald.ryeng@oracle.com-20121010135242-xj34gg73h04hrmyh (fix for
bug #14664077). Backported this patch in 5.5 also to fix this issue.
MDEV-26: Global transaction id, partial commit
Change server_id to be a session variable.
User with SUPER can set it to binlog with different server_id.
Implement backward-compatible ::server_id mirror for plugins.
Generalized support for auto-updated and/or auto-initialized timestamp
and datetime columns. This patch is a reimplementation of MySQL's
"WL#5874: CURRENT_TIMESTAMP as DEFAULT for DATETIME columns". In order to
ease future merges, this implementation reused few function and variable
names from MySQL's patch, however the implementation is quite different.
TODO:
The only unresolved problem in this patch is the semantics of LOAD DATA for
TIMESTAMP and DATETIME columns in the cases when there are missing or NULL
columns. I couldn't fully comprehend the logic behind MySQL's behavior and
its relationship with their own documentation, so I left the results to be
more consistent with all other LOAD cases.
The problematic test cases can be seen by running the test file function_defaults,
and observing the test case differences. Those were left on purpose for discussion.
