when used with --tab
1) New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE).
mysqldump is updated to use this in --tab mode.
2) ESCAPED BY/ENCLOSED BY field parameters are documented as
accepting CHAR argument, however SELECT .. INTO OUTFILE
silently ignored rests of multisymbol arguments.
For the symmetrical behavior with LOAD DATA INFILE the
server has been modified to fail with the same error:
ERROR 42000: Field separator argument is not what is
expected; check the manual
3) Current LOAD DATA INFILE recognizes field/line separators
"as is" without converting from client charset to data
file charset. So, it is supposed, that input file of
LOAD DATA INFILE consists of data in one charset and
separators in other charset. For the compatibility with
that [buggy] behaviour SELECT INTO OUTFILE implementation
has been saved "as is" too, but the new warning message
has been added:
Non-ASCII separator arguments are not fully supported
This message warns on field/line separators that contain
non-ASCII symbols.
Altering a table to update a column with types DATE or TIMESTAMP
would incorrectly be seen as a significant change that necessitates
a slow copy+rename operation instead of a fast update.
There were two problems:
The character set is magically set for TIMESTAMP to be "binary",
but that was done too deep in field use code for ALTER TABLE to
know of it. Now, put that in the constructor for Field_timestamp.
Also, when we set the character set for the new replacement/
comparison field, also raise the "binary" field flag that tells us
we should compare it exactly. That is necessary to match the old
stored definition.
Next is the problem that the default length for TIMESTAMP and DATE
fields is different than the length read from the .frm . The
compressed size is written to the file, but the human-readable,
part-delimited length is used as default length. IIRC, for
timestamp it was 19!=14, and for date it was 8!=10. Length
mismatch causes a table copy.
Also, clean up a place where a comparison function alters one of its
parameters and replace it with an assertion of the condition it
mutates.
Altering a table to update a column with types DATE or TIMESTAMP
would incorrectly be seen as a significant change that necessitates
a slow copy+rename operation instead of a fast update.
There were two problems:
The character set is magically set for TIMESTAMP to be "binary",
but that was done too deep in field use code for ALTER TABLE to
know of it. Now, put that in the constructor for Field_timestamp.
Also, when we set the character set for the new replacement/
comparison field, also raise the "binary" field flag that tells us
we should compare it exactly. That is necessary to match the old
stored definition.
Next is the problem that the default length for TIMESTAMP and DATE
fields is different than the length read from the .frm . The
compressed size is written to the file, but the human-readable,
part-delimited length is used as default length. IIRC, for
timestamp it was 19!=14, and for date it was 8!=10. Length
mismatch causes a table copy.
Also, clean up a place where a comparison function alters one of its
parameters and replace it with an assertion of the condition it
mutates.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
Field_time::get_time() did not initialize some members of
MYSQL_TIME which led to valgrind warnings when those members
were accessed in Protocol_simple::store_time().
It is unlikely that this bug could result in wrong data
being returned, since Field_time::get_time() initializes the
'day' member of MYSQL_TIME to 0, so the value of 'day'
in Protocol_simple::store_time() would be 0 regardless
of the values for 'year' and 'month'.
mysql-test/r/type_time.result:
Added a test case for bug #44792.
mysql-test/t/type_time.test:
Added a test case for bug #44792.
sql/field.cc:
Field_time::get_time() did not initialize some members of
MYSQL_TIME which led to valgrind warnings when those members
were accessed in Protocol_simple::store_time().
Field_time::get_time() did not initialize some members of
MYSQL_TIME which led to valgrind warnings when those members
were accessed in Protocol_simple::store_time().
It is unlikely that this bug could result in wrong data
being returned, since Field_time::get_time() initializes the
'day' member of MYSQL_TIME to 0, so the value of 'day'
in Protocol_simple::store_time() would be 0 regardless
of the values for 'year' and 'month'.
The crash happens due to wrong 'digits' variable value(0),
'digits' can not be 0, so the fix is use 1 as min allowed value.
mysql-test/r/insert.result:
test result
mysql-test/t/insert.test:
test case
sql/field.cc:
The crash happens due to wrong 'digits' variable value(0),
'digits' can not be 0, so the fix is use 1 as min allowed value.
UNION could convert fixed-point FLOAT(M,D)/DOUBLE(M,D) columns
to FLOAT/DOUBLE when aggregating data types from the SELECT
substatements. While there is nothing particularly wrong with
this behavior, especially when M is greater than the hardware
precision limits, it could be confusing in cases when all
SELECT statements in a union have the same
FLOAT(M,D)/DOUBLE(M,D) columns with equal precision
specifications listed in the same position.
Since the manual is quite vague on what data type should be
returned in such cases, the bug was fixed by implementing the
most 'expected' behavior: do not convert FLOAT(M,D)/DOUBLE(M,D)
to anything else if all SELECT statements in a UNION have the
same precision for that column.
mysql-test/r/union.result:
Added a test case for bug #43432.
mysql-test/t/union.test:
Added a test case for bug #43432.
sql/field.cc:
Replaced FLT_DIG+6 and DBL_DIG+7 with a symbolic constant.
sql/item.cc:
Do not convert FLOAT(M,D)/DOUBLE(M,D)
to anything else if all SELECT statements in a UNION have the
same precision for that column.
sql/mysql_priv.h:
Added a symbolic constant for FLT_DIG+6 and DBL_DIG+7.
UNION could convert fixed-point FLOAT(M,D)/DOUBLE(M,D) columns
to FLOAT/DOUBLE when aggregating data types from the SELECT
substatements. While there is nothing particularly wrong with
this behavior, especially when M is greater than the hardware
precision limits, it could be confusing in cases when all
SELECT statements in a union have the same
FLOAT(M,D)/DOUBLE(M,D) columns with equal precision
specifications listed in the same position.
Since the manual is quite vague on what data type should be
returned in such cases, the bug was fixed by implementing the
most 'expected' behavior: do not convert FLOAT(M,D)/DOUBLE(M,D)
to anything else if all SELECT statements in a UNION have the
same precision for that column.
- Added braces around expressions with &&, ||, & and |
- Added empty line before ; for empty while and for loops
- Added () around if with assignments
- Removed const before function returning simple type
Changed BUILD scripts to not build with NDB
BUILD/SETUP.sh:
By default, don't build ndb with --max in Maria tree.
NDB is not kept up to date anyway in 5.1
client/mysql.cc:
Added braces around && to get rid of compiler warnings
sql/event_db_repository.cc:
Added braces around && to get rid of compiler warnings
sql/events.cc:
Added braces around && to get rid of compiler warnings
sql/field.cc:
Added braces around && to get rid of compiler warnings
Fixed for loops
sql/field.h:
Added braces around & to get rid of compiler warnings
sql/field_conv.cc:
Added braces around && to get rid of compiler warnings
Fixed bug when copying between DATETIME fields and strict dates are used
Removed not needeed else
sql/gstream.cc:
Added braces around && to get rid of compiler warnings
sql/ha_ndbcluster.cc:
Added braces around && to get rid of compiler warnings
Added {} to get rid of compiler warnings
sql/handler.cc:
Added braces around && to get rid of compiler warnings
sql/item.cc:
Added braces around && to get rid of compiler warnings
sql/item_cmpfunc.cc:
Added braces around && to get rid of compiler warnings
Removed some not needed space
sql/item_func.cc:
Added braces around && to get rid of compiler warnings
sql/item_strfunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_subselect.cc:
Added braces around && to get rid of compiler warnings
sql/item_sum.cc:
Added braces around && to get rid of compiler warnings
sql/item_timefunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_xmlfunc.cc:
Added empty line before ; for empty while and for loops
sql/log.cc:
Added braces around && to get rid of compiler warnings
sql/log_event.cc:
Added braces around && to get rid of compiler warnings
Removed not needed else
sql/log_event_old.cc:
Added braces around && to get rid of compiler warnings
sql/opt_range.cc:
Added braces around && to get rid of compiler warnings
sql/opt_sum.cc:
Added braces around && to get rid of compiler warnings
sql/set_var.cc:
Added empty line before ; for empty while and for loops
Added () around if with assignments
sql/slave.cc:
Added braces around && to get rid of compiler warnings
Added empty line before ; for empty while and for loops
sql/spatial.h:
Added braces around && to get rid of compiler warnings
sql/sql_acl.cc:
Added braces around && to get rid of compiler warnings
sql/sql_analyse.cc:
Added empty line before ; for empty while and for loops
sql/sql_base.cc:
Added braces around && to get rid of compiler warnings
sql/sql_connect.cc:
Added braces around && to get rid of compiler warnings
sql/sql_db.cc:
Added braces around && to get rid of compiler warnings
sql/sql_delete.cc:
Added braces around && to get rid of compiler warnings
sql/sql_help.cc:
Added empty line before ; for empty while and for loops
sql/sql_insert.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
sql/sql_lex.cc:
Cast char array references to uchar; Fixed wrong array referencing when using characters > ASCII 128 in SQL statments
Added empty line before ; for empty while and for loops
Trivial indent fixes
Added braces around && to get rid of compiler warnings
sql/sql_load.cc:
Added braces around && to get rid of compiler warnings
sql/sql_parse.cc:
Added braces around && to get rid of compiler warnings
sql/sql_partition.cc:
Added braces around && to get rid of compiler warnings
sql/sql_plugin.cc:
Fixed bug in detecing if option variable should be readonly
Added empty line before ; for empty while and for loops
sql/sql_prepare.cc:
Added braces around && to get rid of compiler warnings
sql/sql_select.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
Added empty line before ; for empty while and for loops
sql/sql_show.cc:
Added braces around && to get rid of compiler warnings
sql/sql_table.cc:
Added braces around && to get rid of compiler warnings
sql/sql_trigger.cc:
Added braces around && to get rid of compiler warnings
sql/sql_update.cc:
Added braces around && to get rid of compiler warnings
sql/sql_yacc.yy:
Added braces around && to get rid of compiler warnings
sql/table.cc:
Added braces around && to get rid of compiler warnings
sql/table.h:
Added braces around && to get rid of compiler warnings
sql/time.cc:
Added braces around && to get rid of compiler warnings
sql/tztime.cc:
Added braces around && to get rid of compiler warnings
sql/uniques.cc:
Added braces around && to get rid of compiler warnings
storage/federated/ha_federated.cc:
Fixed bug in testing of variable to ha_info() (Not critical)
storage/heap/ha_heap.cc:
Added braces around && to get rid of compiler warnings
storage/maria/ha_maria.cc:
Fixed bug: Mark that maria_log_dir_path is readonly
Added braces around && to get rid of compiler warnings
storage/ndb/include/ndbapi/NdbEventOperation.hpp:
Removed const before function returning simple type
storage/ndb/include/ndbapi/NdbOperation.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/Ndb.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/NdbEventOperation.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbRecAttr.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/TransporterFacade.hpp:
Added braces around && to get rid of compiler warnings
set DATE|DATETIME value to 0 if ALLOW_INVALID_DATES sql_mode is not enabled.
sql/field.cc:
set DATE|DATETIME value to 0 if ALLOW_INVALID_DATES sql_mode is not enabled.
tests/mysql_client_test.c:
test case
Problem: mysqld doesn't detect that enum data must be reinserted performing
'ALTER TABLE' in some cases.
Fix: reinsert data altering an enum field if enum values are changed.
mysql-test/r/alter_table.result:
Fix for bug#23113: Different behavior on altering ENUM fields between 5.0 and 5.1
- test result.
mysql-test/t/alter_table.test:
Fix for bug#23113: Different behavior on altering ENUM fields between 5.0 and 5.1
- test case.
sql/field.cc:
Fix for bug#23113: Different behavior on altering ENUM fields between 5.0 and 5.1
- Field_enum::is_equal() introduced, which is called to detect that a field
is changing by 'ALTER TABLE'.
sql/field.h:
Fix for bug#23113: Different behavior on altering ENUM fields between 5.0 and 5.1
- Field_enum::is_equal() introduced, which is called to detect that a field
is changing by 'ALTER TABLE'.
Problem: mysqld doesn't detect that enum data must be reinserted performing
'ALTER TABLE' in some cases.
Fix: reinsert data altering an enum field if enum values are changed.
A stored procedure involving substrings could crash the server on certain
platforms because of invalid memory reads.
During storing the new blob-field value, the cached value's address range
overlapped that of the new field value. This caused problems when the
cached value storage was reallocated to provide access for a new
characater set representation. The patch checks the address ranges, and if
they overlap, the new field value is copied to a new storage before it is
converted to the new character set.
mysql-test/r/sp.result:
Added result set
mysql-test/t/sp.test:
Added test case
sql/field.cc:
The source and destination address ranges of a character conversion must not overlap or the 'from' address will be invalidated as the temporary value-
object is re-allocated to fit the new character set.
sql/field.h:
Added comments
A stored procedure involving substrings could crash the server on certain
platforms because of invalid memory reads.
During storing the new blob-field value, the cached value's address range
overlapped that of the new field value. This caused problems when the
cached value storage was reallocated to provide access for a new
characater set representation. The patch checks the address ranges, and if
they overlap, the new field value is copied to a new storage before it is
converted to the new character set.
Problem: with @@sql_mode=pad_char_to_full_length
a CHAR column returned additional garbage
after trailing space characters due to
incorrect my_charpos() call.
Fix: call my_charpos() with correct arguments.
Problem: with @@sql_mode=pad_char_to_full_length
a CHAR column returned additional garbage
after trailing space characters due to
incorrect my_charpos() call.
Fix: call my_charpos() with correct arguments.
