AES_ENCRYPT(str, key, [, iv [, mode ]])
AES_DECRYPT(str, key, [, iv [, mode ]])
mode is aes-{128,192,256}-{ecb,cbc,ctr} e.g. "aes-128-cbc".
and a @@block_encryption_mode variable for the default value of mode
change in behavior: AES_ENCRYPT(str, key) can no longer
be used in persistent virtual columns (and alike)
A simple "SET SESSION gtid_seq_no= DEFAULT" did not work, it would straight
up crash the server! Also, explicitly setting gtid_seq_no to 0 gave an error
in --gtid-strict-mode=1.
Setting to DEFAULT or 0 should disable any prior setting of
gtid_seq_no, so that the next transaction is allocated the next GTID
in sequence, as normal.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.
This patch adds a way to override default collations
(or "character set collations") for desired character sets.
The SQL standard says:
> Each collation known in an SQL-environment is applicable to one
> or more character sets, and for each character set, one or more
> collations are applicable to it, one of which is associated with
> it as its character set collation.
In MariaDB, character set collations has been hard-coded so far,
e.g. utf8mb4_general_ci has been a hard-coded character set collation
for utf8mb4.
This patch allows to override (globally per server, or per session)
character set collations, so for example, uca1400_ai_ci can be set as a
character set collation for Unicode character sets
(instead of compiled xxx_general_ci).
The array of overridden character set collations is stored in a new
(session and global) system variable @@character_set_collations and
can be set as a comma separated list of charset=collation pairs, e.g.:
SET @@character_set_collations='utf8mb3=uca1400_ai_ci,utf8mb4=uca1400_ai_ci';
The variable is empty by default, which mean use the hard-coded
character set collations (e.g. utf8mb4_general_ci for utf8mb4).
The variable can also be set globally by passing to the server startup command
line, and/or in my.cnf.
The new statistics is enabled by adding the "engine", "innodb" or "full"
option to --log-slow-verbosity
Example output:
# Pages_accessed: 184 Pages_read: 95 Pages_updated: 0 Old_rows_read: 1
# Pages_read_time: 17.0204 Engine_time: 248.1297
Page_read_time is time doing physical reads inside a storage engine.
(Writes cannot be tracked as these are usually done in the background).
Engine_time is the time spent inside the storage engine for the full
duration of the read/write/update calls. It uses the same code as
'analyze statement' for calculating the time spent.
The engine statistics is done with a generic interface that should be
easy for any engine to use. It can also easily be extended to provide
even more statistics.
Currently only InnoDB has counters for Pages_% and Undo_% status.
Engine_time works for all engines.
Implementation details:
class ha_handler_stats holds all engine stats. This class is included
in handler and THD classes.
While a query is running, all statistics is updated in the handler. In
close_thread_tables() the statistics is added to the THD.
handler::handler_stats is a pointer to where statistics should be
collected. This is set to point to handler::active_handler_stats if
stats are requested. If not, it is set to 0.
handler_stats has also an element, 'active' that is 1 if stats are
requested. This is to allow engines to avoid doing any 'if's while
updating the statistics.
Cloned or partition tables have the pointer set to the base table if
status are requested.
There is a small performance impact when using --log-slow-verbosity=engine:
- All engine calls in 'select' will be timed.
- IO calls for InnoDB reads will be timed.
- Incrementation of counters are done on local variables and accesses
are inline, so these should have very little impact.
- Statistics has to be reset for each statement for the THD and each
used handler. This is only 40 bytes, which should be neglectable.
- For partition tables we have to loop over all partitions to update
the handler_status as part of table_init(). Can be optimized in the
future to only do this is log-slow-verbosity changes. For this to work
we have to update handler_status for all opened partitions and
also for all partitions opened in the future.
Other things:
- Added options 'engine' and 'full' to log-slow-verbosity.
- Some of the new files in the test suite comes from Percona server, which
has similar status information.
- buf_page_optimistic_get(): Do not increment any counter, since we are
only validating a pointer, not performing any buf_pool.page_hash lookup.
- Added THD argument to save_explain_data_intern().
- Switched arguments for save_explain_.*_data() to have
always THD first (generates better code as other functions also have THD
first).
Kenyan Swahili is enabled for error messages as well as datetime.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.
Turn the remaining three `binlog*` options binlog_do_db, binlog_ignore_db,
binlog_rows_event_max_size into global variables so that they can be
visible from the SQL user level. This is for audit / secure
configuration check purposes.
Create new MTR tests to make sure that the newly created global
variables can be visible from the command line interface.
Behavior before the code change:
MariaDB [(none)]> SHOW GLOBAL VARIABLES WHERE
-> Variable_name LIKE 'binlog_do_db' OR
-> Variable_name LIKE 'binlog_ignore_db' OR
-> Variable_name LIKE 'binlog_row_event_max_size';
Empty set (0.001 sec)
Behavior after the code change:
MariaDB [(none)]> SHOW GLOBAL VARIABLES WHERE
-> Variable_name LIKE 'binlog_do_db' OR
-> Variable_name LIKE 'binlog_ignore_db' OR
-> Variable_name LIKE 'binlog_row_event_max_size';
+---------------------------+-------+
| Variable_name | Value |
+---------------------------+-------+
| binlog_do_db | |
| binlog_ignore_db | |
| binlog_row_event_max_size | 8192 |
+---------------------------+-------+
3 rows in set (0.001 sec)
Note:
For `binlog_do_db` and `binlog_ignore_db`, we add a new class
`Sys_var_binlog_filter` to handle the dynamically-composable command line
options for `binlog_do_db` and `binlog_ignore_db`. Below
is the motivation:
When the users start the server with the option
--binlog-do-db="database1" --binlog-do-db="database2"
The expected behavior is that the system should allow replication for
both `database1` and `database2`, which is the logic of the original
code.
However, when turning the variables into system variables, the
functionality does not exist any more, since system variables will only
handle the last occurrence of the option, and in this case, the system
will only be able to handle `database2`.
Copyright:
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the BSD-new
license. I am contributing on behalf of my employer Amazon Web Services, Inc.
Do not allow setting wsrep_sst_donor as NULL as it is
incorrect value. User can use value '' (default) that represents
same as NULL. Setting wsrep_cluster_address to NULL is
already handled correctly.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Introduces @@optimizer_switch flag: hash_join_cardinality
When this option is on, use EITS statistics to produce tighter bounds
for hash join output cardinality.
This patch is an extension / replacement to a similar patch in 10.6
New features:
- optimizer_switch hash_join_cardinality is on by default
- records_out is set to fanout when HASH is used
- Fixed bug in is_eits_usable: The function did not work with views
The cause of the crash was that test was setting
aria_sort_buffer_size to MAX_LONG_LONG, which caused an overflow in
my_malloc() when trying to allocate the buffer + 8 bytes.
Fixed by reducing max size of sort_buffer for Aria and MyISAM
Other things:
- Added code in maria_repair_parallell() to not allocate a big sort buffer
for small files.
- Updated size of minumim sort buffer in Aria
Introduce @@optimizer_switch flag: hash_join_cardinality
When it is on, use EITS statistics to produce tighter bounds for
hash join output cardinality.
Amended by Monty.
Reviewed by: Monty <monty@mariadb.org>
MDEV-28769 earlier disabled the use if IDs with non-default collations
in statements like:
SET character_set_results=2/*latin2_czech_cs*/;
SET character_set_client=2/*latin2_czech_cs*/;
SET character_set_server=2/*latin2_czech_cs*/;
SET character_set_connection=2/*latin2_czech_cs*/;
MDEV-30824 later fixed "mysqlbinlog" to dump character set names
instead of IDs in these statements:
< SET @@session.character_set_client=33, ... /*!*/;
> SET @@session.character_set_client=utf8mb3, ... /*!*/;
However, mysqlbinlog from old (pre MDEV-30824) distributions can
still produce incorrect statements with numeric non-default
collation IDs.
New servers should still be able to load old dumps.
Allowing the use of "SET @@character_set_xxx=ID" with numeric
non-default collation IDs but only if:
- the current THD is a true slave thread or
- the current THD a pseudo slave thread
(loading a mysqlbinlog output).
